We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
This chip is shown in the user manual: But the adxl345 I bought is like this (same with klipper office manual):
The pin name is different between these two chips. How can I connect this rectangular chip to m8p by PSI port?
The text was updated successfully, but these errors were encountered:
Here is what I used:
MP8 pin adxl pin gnd gnd +5V vcc PA5 SCl PA6 SDO PB15 CS PA7 SDA
Sorry, something went wrong.
No branches or pull requests
This chip is shown in the user manual:
![CB5493EC-AB88-42a1-B4BE-8895EF3FCCA4](https://user-images.githubusercontent.com/75966492/215641684-a647d6ec-28cf-4a46-8ed7-04511cb486f3.png)
![lQLPJwvYGoy_uzjNAT7M0LAJdlW3HzVa1wPTBhBDAJ8A_208_318](https://user-images.githubusercontent.com/75966492/215643479-0b344cd5-1538-447f-a99d-6e96a25ade8e.png)
But the adxl345 I bought is like this (same with klipper office manual):
The pin name is different between these two chips. How can I connect this rectangular chip to m8p by PSI port?
The text was updated successfully, but these errors were encountered: