Skip to content

Latest commit

 

History

History
1333 lines (921 loc) · 39.2 KB

config.md

File metadata and controls

1333 lines (921 loc) · 39.2 KB

The go-btfs config file

The go-btfs config file is a JSON document located at $BTFS_PATH/config. It is read once at node instantiation, either for an offline command, or when starting the daemon. Commands that execute on a running daemon do not read the config file at runtime.

Profiles

Configuration profiles allow to tweak configuration quickly. Profiles can be applied with --profile flag to btfs init or with the btfs config profile apply command. When a profile is applied a backup of the configuration file will be created in $BTFS_PATH.

The available configuration profiles are listed below. You can also find them documented in ipfs config profile --help.

  • server

    Disables local host discovery, recommended when running IPFS on machines with public IPv4 addresses.

  • randomports

    Use a random port number for swarm.

  • default-datastore

    Configures the node to use the default datastore (flatfs).

    Read the "flatfs" profile description for more information on this datastore.

    This profile may only be applied when first initializing the node.

  • local-discovery

    Sets default values to fields affected by the server profile, enables discovery in local networks.

  • test

    Reduces external interference of BTFS daemon, this is useful when using the daemon in test environments.

  • default-networking

    Restores default network settings. Inverse profile of the test profile.

  • announce-public

    Announce public IP when running on cloud VM or local network.

  • flatfs

    Configures the node to use the flatfs datastore.

    This is the most battle-tested and reliable datastore, but it's significantly slower than the badger datastore. You should use this datastore if:

    • You need a very simple and very reliable datastore you and trust your filesystem. This datastore stores each block as a separate file in the underlying filesystem so it's unlikely to loose data unless there's an issue with the underlying file system.
    • You need to run garbage collection on a small (<= 10GiB) datastore. The default datastore, badger, can leave several gigabytes of data behind when garbage collecting.
    • You're concerned about memory usage. In its default configuration, badger can use up to several gigabytes of memory.

    This profile may only be applied when first initializing the node.

  • badgerds

    Configures the node to use the badger datastore.

    This is the fastest datastore. Use this datastore if performance, especially when adding many gigabytes of files, is critical. However:

    • This datastore will not properly reclaim space when your datastore is smaller than several gigabytes. If you run IPFS with '--enable-gc' (you have enabled block-level garbage collection), you plan on storing very little data in your IPFS node, and disk usage is more critical than performance, consider using flatfs.
    • This datastore uses up to several gigabytes of memory.

    This profile may only be applied when first initializing the node.

  • lowpower

    Reduces daemon overhead on the system. May affect node functionality - performance of content discovery and data fetching may be degraded.

Types

This document refers to the standard JSON types (e.g., null, string, number, etc.), as well as a few custom types, described below.

flag

Flags allow enabling and disabling features. However, unlike simple booleans, they can also be null (or omitted) to indicate that the default value should be chosen. This makes it easier for go-ipfs to change the defaults in the future unless the user explicitly sets the flag to either true (enabled) or false (disabled). Flags have three possible states:

  • null or missing (apply the default value).
  • true (enabled)
  • false (disabled)

priority

Priorities allow specifying the priority of a feature/protocol and disabling the feature/protocol. Priorities can take one of the following values:

  • null/missing (apply the default priority, same as with flags)
  • false (disabled)
  • 1 - 2^63 (priority, lower is preferred)

strings

Strings is a special type for conveniently specifying a single string, an array of strings, or null:

  • null
  • "a single string"
  • ["an", "array", "of", "strings"]

duration

Duration is a type for describing lengths of time, using the same format go does (e.g, "1d2h4m40.01s").

Table of Contents

Addresses

Contains information about various listener addresses to be used by this node.

Addresses.API

Multiaddr or array of multiaddrs describing the address to serve the local HTTP API on.

Supported Transports:

  • tcp/ip{4,6} - /ipN/.../tcp/...
  • unix - /unix/path/to/socket

Default: /ip4/127.0.0.1/tcp/5001

Type: strings (multiaddrs)

Addresses.Gateway

Multiaddr or array of multiaddrs describing the address to serve the local gateway on.

Supported Transports:

  • tcp/ip{4,6} - /ipN/.../tcp/...
  • unix - /unix/path/to/socket

Default: /ip4/127.0.0.1/tcp/8080

Type: strings (multiaddrs)

Addresses.Swarm

Array of multiaddrs describing which addresses to listen on for p2p swarm connections.

Supported Transports:

  • tcp/ip{4,6} - /ipN/.../tcp/...
  • websocket - /ipN/.../tcp/.../ws
  • quic - /ipN/.../udp/.../quic

Default:

[
  "/ip4/0.0.0.0/tcp/4001",
  "/ip6/::/tcp/4001",
  "/ip4/0.0.0.0/udp/4001/quic",
  "/ip6/::/udp/4001/quic"
]

Type: array[string] (multiaddrs)

Addresses.Announce

If non-empty, this array specifies the swarm addresses to announce to the network. If empty, the daemon will announce inferred swarm addresses.

Default: []

Type: array[string] (multiaddrs)

Addresses.NoAnnounce

Array of swarm addresses not to announce to the network.

Default: []

Type: array[string] (multiaddrs)

API

Contains information used by the API gateway.

API.HTTPHeaders

Map of HTTP headers to set on responses from the API HTTP server.

Example:

{
	"Foo": ["bar"]
}

Default: null

Type: object[string -> array[string]] (header names -> array of header values)

AutoNAT

Contains the configuration options for the AutoNAT service. The AutoNAT service helps other nodes on the network determine if they're publicly reachable from the rest of the internet.

AutoNAT.ServiceMode

When unset (default), the AutoNAT service defaults to enabled. Otherwise, this field can take one of two values:

  • "enabled" - Enable the service (unless the node determines that it, itself, isn't reachable by the public internet).
  • "disabled" - Disable the service.

Additional modes may be added in the future.

Type: string (one of "enabled" or "disabled")

AutoNAT.Throttle

When set, this option configure's the AutoNAT services throttling behavior. By default, go-ipfs will rate-limit the number of NAT checks performed for other nodes to 30 per minute, and 3 per peer.

AutoNAT.Throttle.GlobalLimit

Configures how many AutoNAT requests to service per AutoNAT.Throttle.Interval.

Default: 30

Type: integer (non-negative, 0 means unlimited)

AutoNAT.Throttle.PeerLimit

Configures how many AutoNAT requests per-peer to service per AutoNAT.Throttle.Interval.

Default: 3

Type: integer (non-negative, 0 means unlimited)

AutoNAT.Throttle.Interval

Configures the interval for the above limits.

Default: 1 Minute

Type: duration (when 0/unset, the default value is used)

Bootstrap

Bootstrap is an array of multiaddrs of trusted nodes to connect to in order to initiate a connection to the network.

Type: array[string] (multiaddrs)

Datastore

Contains information related to the construction and operation of the on-disk storage system.

Datastore.StorageMax

A soft upper limit for the size of the ipfs repository's datastore. With StorageGCWatermark, is used to calculate whether to trigger a gc run (only if --enable-gc flag is set).

Default: "10GB"

Type: string (size)

Datastore.StorageGCWatermark

The percentage of the StorageMax value at which a garbage collection will be triggered automatically if the daemon was run with automatic gc enabled (that option defaults to false currently).

Default: 90

Type: integer (0-100%)

Datastore.GCPeriod

A time duration specifying how frequently to run a garbage collection. Only used if automatic gc is enabled.

Default: 1h

Type: duration (an empty string means the default value)

Datastore.HashOnRead

A boolean value. If set to true, all block reads from disk will be hashed and verified. This will cause increased CPU utilization.

Default: false

Type: bool

Datastore.BloomFilterSize

A number representing the size in bytes of the blockstore's bloom filter. A value of zero represents the feature being disabled.

This site generates useful graphs for various bloom filter values: https://hur.st/bloomfilter/?n=1e6&p=0.01&m=&k=7 You may use it to find a preferred optimal value, where m is BloomFilterSize in bits. Remember to convert the value m from bits, into bytes for use as BloomFilterSize in the config file. For example, for 1,000,000 blocks, expecting a 1% false positive rate, you'd end up with a filter size of 9592955 bits, so for BloomFilterSize we'd want to use 1199120 bytes. As of writing, 7 hash functions are used, so the constant k is 7 in the formula.

Default: 0 (disabled)

Type: integer (non-negative, bytes)

Datastore.Spec

Spec defines the structure of the ipfs datastore. It is a composable structure, where each datastore is represented by a json object. Datastores can wrap other datastores to provide extra functionality (eg metrics, logging, or caching).

This can be changed manually, however, if you make any changes that require a different on-disk structure, you will need to run the ipfs-ds-convert tool to migrate data into the new structures.

For more information on possible values for this configuration option, see docs/datastores.md

Default:

{
  "mounts": [
	{
	  "child": {
		"path": "blocks",
		"shardFunc": "/repo/flatfs/shard/v1/next-to-last/2",
		"sync": true,
		"type": "flatfs"
	  },
	  "mountpoint": "/blocks",
	  "prefix": "flatfs.datastore",
	  "type": "measure"
	},
	{
	  "child": {
		"compression": "none",
		"path": "datastore",
		"type": "levelds"
	  },
	  "mountpoint": "/",
	  "prefix": "leveldb.datastore",
	  "type": "measure"
	}
  ],
  "type": "mount"
}

Type: object

Discovery

Contains options for configuring btfs node discovery mechanisms.

Discovery.MDNS

Options for multicast dns peer discovery.

Discovery.MDNS.Enabled

A boolean value for whether or not mdns should be active.

Default: true

Type: bool

Discovery.MDNS.Interval

A number of seconds to wait between discovery checks.

Default: 5

Type: integer (integer seconds, 0 means the default)

Gateway

Options for the HTTP gateway.

Gateway.NoFetch

When set to true, the gateway will only serve content already in the local repo and will not fetch files from the network.

Default: false

Type: bool

Gateway.NoDNSLink

A boolean to configure whether DNSLink lookup for value in Host HTTP header should be performed. If DNSLink is present, content path stored in the DNS TXT record becomes the / and respective payload is returned to the client.

Default: false

Type: bool

Gateway.HTTPHeaders

Headers to set on gateway responses.

Default:

{
	"Access-Control-Allow-Headers": [
		"X-Requested-With"
	],
	"Access-Control-Allow-Methods": [
		"GET"
	],
	"Access-Control-Allow-Origin": [
		"*"
	]
}

Type: object[string -> array[string]]

Gateway.RootRedirect

A url to redirect requests for / to.

Default: ""

Type: string (url)

Gateway.Writable

A boolean to configure whether the gateway is writeable or not.

Default: false

Type: bool

Gateway.PathPrefixes

Array of acceptable url paths that a client can specify in X-Btfs-Path-Prefix header.

The X-Btfs-Path-Prefix header is used to specify a base path to prepend to links in directory listings and for trailing-slash redirects. It is intended to be set by a frontend http proxy like nginx.

Example: We mount blog.ipfs.io (a dnslink page) at ipfs.io/blog.

.ipfs/config

"Gateway": {
  "PathPrefixes": ["/blog"],
}

nginx_ipfs.conf

location /blog/ {
  rewrite "^/blog(/.*)$" $1 break;
  proxy_set_header Host blog.ipfs.io;
  proxy_set_header X-Btfs-Gateway-Prefix /blog;
  proxy_pass http://127.0.0.1:8080;
}

Default: []

Type: array[string]

Gateway.PublicGateways

PublicGateways is a dictionary for defining gateway behavior on specified hostnames.

Hostnames can optionally be defined with one or more wildcards.

Examples:

  • *.example.com will match requests to http://foo.example.com/ipfs/* or http://{cid}.ipfs.bar.example.com/*.
  • foo-*.example.com will match requests to http://foo-bar.example.com/ipfs/* or http://{cid}.ipfs.foo-xyz.example.com/*.

Gateway.PublicGateways: Paths

Array of paths that should be exposed on the hostname.

Example:

{
  "Gateway": {
    "PublicGateways": {
      "example.com": {
        "Paths": ["/ipfs", "/ipns"],
      }
    }
  }
}

Above enables http://example.com/ipfs/* and http://example.com/ipns/* but not http://example.com/api/*

Default: []

Type: array[string]

Gateway.PublicGateways: UseSubdomains

A boolean to configure whether the gateway at the hostname provides Origin isolation between content roots.

  • true - enables subdomain gateway at http://*.{hostname}/

    • Requires whitelist: make sure respective Paths are set. For example, Paths: ["/ipfs", "/ipns"] are required for http://{cid}.ipfs.{hostname} and http://{foo}.ipns.{hostname} to work:
      "Gateway": {
          "PublicGateways": {
              "dweb.link": {
                  "UseSubdomains": true,
                  "Paths": ["/ipfs", "/ipns"],
              }
          }
      }
    • Backward-compatible: requests for content paths such as http://{hostname}/ipfs/{cid} produce redirect to http://{cid}.ipfs.{hostname}
    • API: if /api is on the Paths whitelist, http://{hostname}/api/{cmd} produces redirect to http://api.{hostname}/api/{cmd}
  • false - enables path gateway at http://{hostname}/*

    • Example:
      "Gateway": {
          "PublicGateways": {
              "ipfs.io": {
                  "UseSubdomains": false,
                  "Paths": ["/ipfs", "/ipns", "/api"],
              }
          }
      }

Default: false

Type: bool

Gateway.PublicGateways: NoDNSLink

A boolean to configure whether DNSLink for hostname present in Host HTTP header should be resolved. Overrides global setting. If Paths are defined, they take priority over DNSLink.

Default: false (DNSLink lookup enabled by default for every defined hostname)

Type: bool

Implicit defaults of Gateway.PublicGateways

Default entries for localhost hostname and loopback IPs are always present. If additional config is provided for those hostnames, it will be merged on top of implicit values:

{
  "Gateway": {
    "PublicGateways": {
      "localhost": {
        "Paths": ["/ipfs", "/ipns"],
        "UseSubdomains": true
      }
    }
  }
}

It is also possible to remove a default by setting it to null.
For example, to disable subdomain gateway on localhost and make that hostname act the same as 127.0.0.1:

$ ipfs config --json Gateway.PublicGateways '{"localhost": null }'

Gateway recipes

Below is a list of the most common public gateway setups.

  • Public subdomain gateway at http://{cid}.ipfs.dweb.link (each content root gets its own Origin)

    $ ipfs config --json Gateway.PublicGateways '{
        "dweb.link": {
          "UseSubdomains": true,
          "Paths": ["/ipfs", "/ipns"]
        }
      }'

    Note I: this enables automatic redirects from content paths to subdomains:
    http://dweb.link/ipfs/{cid}http://{cid}.ipfs.dweb.link
    Note II: if you run go-ipfs behind a reverse proxy that provides TLS, make it add a X-Forwarded-Proto: https HTTP header to ensure users are redirected to https://, not http://. The NGINX directive is proxy_set_header X-Forwarded-Proto "https";.:
    http://dweb.link/ipfs/{cid}https://{cid}.ipfs.dweb.link
    Note III: we also support X-Forwarded-Proto: example.com if you want to override subdomain gateway host from the original request: http://dweb.link/ipfs/{cid}http://{cid}.ipfs.example.com

  • Public path gateway at http://ipfs.io/ipfs/{cid} (no Origin separation)

    $ ipfs config --json Gateway.PublicGateways '{
        "ipfs.io": {
          "UseSubdomains": false,
          "Paths": ["/ipfs", "/ipns", "/api"]
        }
      }'
  • Public DNSLink gateway resolving every hostname passed in Host header.

    $ ipfs config --json Gateway.NoDNSLink true
    • Note that NoDNSLink: false is the default (it works out of the box unless set to true manually)
  • Hardened, site-specific DNSLink gateway.
    Disable fetching of remote data (NoFetch: true) and resolving DNSLink at unknown hostnames (NoDNSLink: true). Then, enable DNSLink gateway only for the specific hostname (for which data is already present on the node), without exposing any content-addressing Paths: "NoFetch": true, "NoDNSLink": true,

    $ ipfs config --json Gateway.NoFetch true
    $ ipfs config --json Gateway.NoDNSLink true
    $ ipfs config --json Gateway.PublicGateways '{
        "en.wikipedia-on-ipfs.org": {
          "NoDNSLink": false,
          "Paths": []
        }
      }'

Identity

Identity.PeerID

The unique PKI identity label for this configs peer. Set on init and never read, its merely here for convenience. BTFS will always generate the peerID from its keypair at runtime.

Type: string (peer ID)

Identity.PrivKey

The base64 encoded protobuf describing (and containing) the nodes private key.

Type: string (base64 encoded)

Ipns

Ipns.RepublishPeriod

A time duration specifying how frequently to republish ipns records to ensure they stay fresh on the network.

Default: 4 hours.

Type: interval or an empty string for the default.

Ipns.RecordLifetime

A time duration specifying the value to set on ipns records for their validity lifetime.

Default: 24 hours.

Type: interval or an empty string for the default.

Ipns.ResolveCacheSize

The number of entries to store in an LRU cache of resolved ipns entries. Entries will be kept cached until their lifetime is expired.

Default: 128

Type: integer (non-negative, 0 means the default)

Mounts

FUSE mount point configuration options.

  • BTFS Mountpoint for /btfs/.

Default: /btfs

Type: string (filesystem path)

Mounts.BTNS

Mountpoint for /BTNS/.

Default: /btns

Type: string (filesystem path)

Mounts.FuseAllowOther

Sets the FUSE allow other option on the mountpoint.

Pubsub

Pubsub configures the ipfs pubsub subsystem. To use, it must be enabled by passing the --enable-pubsub-experiment flag to the daemon.

Pubsub.Router

Sets the default router used by pubsub to route messages to peers. This can be one of:

  • "floodsub" - floodsub is a basic router that simply floods messages to all connected peers. This router is extremely inefficient but very reliable.
  • "gossipsub" - gossipsub is a more advanced routing algorithm that will build an overlay mesh from a subset of the links in the network.

Default: "gossipsub"

Type: string (one of "floodsub", "gossipsub", or "" (apply default))

Pubsub.DisableSigning

Disables message signing and signature verification. Enable this option if you're operating in a completely trusted network.

It is not safe to disable signing even if you don't care who sent the message because spoofed messages can be used to silence real messages by intentionally re-using the real message's message ID.

Default: false

Type: bool

Peering

Configures the peering subsystem. The peering subsystem configures go-ipfs to connect to, remain connected to, and reconnect to a set of nodes. Nodes should use this subsystem to create "sticky" links between frequently useful peers to improve reliability.

Use-cases:

  • An IPFS gateway connected to an IPFS cluster should peer to ensure that the gateway can always fetch content from the cluster.
  • A dapp may peer embedded go-ipfs nodes with a set of pinning services or textile cafes/hubs.
  • A set of friends may peer to ensure that they can always fetch each other's content.

When a node is added to the set of peered nodes, go-ipfs will:

  1. Protect connections to this node from the connection manager. That is, go-ipfs will never automatically close the connection to this node and connections to this node will not count towards the connection limit.
  2. Connect to this node on startup.
  3. Repeatedly try to reconnect to this node if the last connection dies or the node goes offline. This repeated re-connect logic is governed by a randomized exponential backoff delay ranging from ~5 seconds to ~10 minutes to avoid repeatedly reconnect to a node that's offline.

Peering can be asymmetric or symmetric:

  • When symmetric, the connection will be protected by both nodes and will likely be vary stable.
  • When asymmetric, only one node (the node that configured peering) will protect the connection and attempt to re-connect to the peered node on disconnect. If the peered node is under heavy load and/or has a low connection limit, the connection may flap repeatedly. Be careful when asymmetrically peering to not overload peers.

Peering.Peers

The set of peers with which to peer.

{
  "Peering": {
    "Peers": [
      {
        "ID": "QmPeerID1",
        "Addrs": ["/ip4/18.1.1.1/tcp/4001"]
      },
      {
        "ID": "QmPeerID2",
        "Addrs": ["/ip4/18.1.1.2/tcp/4001", "/ip4/18.1.1.2/udp/4001/quic"]
      }
    ]
  }
  ...
}

Where ID is the peer ID and Addrs is a set of known addresses for the peer. If no addresses are specified, the DHT will be queried.

Additional fields may be added in the future.

Default: empty.

Type: array[peering]

Reprovider

Reprovider.Interval

Sets the time between rounds of reproviding local content to the routing system. If unset, it defaults to 12 hours. If set to the value "0" it will disable content reproviding.

Note: disabling content reproviding will result in other nodes on the network not being able to discover that you have the objects that you have. If you want to have this disabled and keep the network aware of what you have, you must manually announce your content periodically.

Type: array[peering]

Reprovider.Strategy

Tells reprovider what should be announced. Valid strategies are:

  • "all" - announce all stored data
  • "pinned" - only announce pinned data
  • "roots" - only announce directly pinned keys and root keys of recursive pins

Default: all

Type: string (or unset for the default)

Routing

Contains options for content, peer, and IPNS routing mechanisms.

Routing.Type

Content routing mode. Can be overridden with daemon --routing flag.

There are two core routing options: "none" and "dht" (default).

  • If set to "none", your node will use no routing system. You'll have to explicitly connect to peers that have the content you're looking for.
  • If set to "dht" (or "dhtclient"/"dhtserver"), your node will use the IPFS DHT.

When the DHT is enabled, it can operate in two modes: client and server.

  • In server mode, your node will query other peers for DHT records, and will respond to requests from other peers (both requests to store records and requests to retrieve records).
  • In client mode, your node will query the DHT as a client but will not respond to requests from other peers. This mode is less resource intensive than server mode.

When Routing.Type is set to dht, your node will start as a DHT client, and switch to a DHT server when and if it determines that it's reachable from the public internet (e.g., it's not behind a firewall).

To force a specific DHT mode, client or server, set Routing.Type to dhtclient or dhtserver respectively. Please do not set this to dhtserver unless you're sure your node is reachable from the public network.

Example:

{
  "Routing": {
    "Type": "dhtclient"
  }
}

Default: dht

Type: string (or unset for the default)

Swarm

Options for configuring the swarm.

Swarm.AddrFilters

An array of addresses (multiaddr netmasks) to not dial. By default, IPFS nodes advertise all addresses, even internal ones. This makes it easier for nodes on the same network to reach each other. Unfortunately, this means that an IPFS node will try to connect to one or more private IP addresses whenever dialing another node, even if this other node is on a different network. This may trigger netscan alerts on some hosting providers or cause strain in some setups.

The server configuration profile fills up this list with sensible defaults, preventing dials to all non-routable IP addresses (e.g., 192.168.0.0/16) but you should always check settings against your own network and/or hosting provider.

Default: []

Type: array[string]

Swarm.DisableBandwidthMetrics

  • DisableBandwidthMetrics bandwidth metrics. Disabling bandwidth metrics can lead to a slight performance improvement, as well as a reduction in memory usage.

Default: false

Type: bool

Swarm.DisableNatPortMap

Disable automatic NAT port forwarding.

When not disabled (default), go-ipfs asks NAT devices (e.g., routers), to open up an external port and forward it to the port go-ipfs is running on. When this works (i.e., when your router supports NAT port forwarding), it makes the local go-ipfs node accessible from the public internet.

Default: false

Type: bool

Swarm.DisableRelay

Deprecated: Set Swarm.Transports.Network.Relay to false.

Disables the p2p-circuit relay transport. This will prevent this node from connecting to nodes behind relays, or accepting connections from nodes behind relays.

Default: false

Type: bool

Swarm.EnableRelayHop

Configures this node to act as a relay "hop". A relay "hop" relays traffic for other peers.

WARNING: Do not enable this option unless you know what you're doing. Other peers will randomly decide to use your node as a relay and consume all available bandwidth. There is no rate-limiting.

Default: false

Type: bool

Swarm.EnableAutoRelay

Enables "automatic relay" mode for this node. This option does two very different things based on the Swarm.EnableRelayHop. See #7228 for context.

Default: false

Type: bool

Mode 1: EnableRelayHop is false

If Swarm.EnableAutoRelay is enabled and Swarm.EnableRelayHop is disabled, your node will automatically use public relays from the network if it detects that it cannot be reached from the public internet (e.g., it's behind a firewall). This is likely the feature you're looking for.

If you enable EnableAutoRelay, you should almost certainly disable EnableRelayHop.

Mode 2: EnableRelayHop is true

If EnableAutoRelay is enabled and EnableRelayHop is enabled, your node will act as a public relay for the network. Furthermore, in addition to simply relaying traffic, your node will advertise itself as a public relay. Unless you have the bandwidth of a small ISP, do not enable both of these options at the same time.

Swarm.EnableAutoNATService

REMOVED

Please use [AutoNAT.ServiceMode][].

Swarm.ConnMgr

The connection manager determines which and how many connections to keep and can be configured to keep. Go-ipfs currently supports two connection managers:

  • none: never close idle connections.
  • basic: the default connection manager.

Default: basic

Swarm.ConnMgr.Type

Sets the type of connection manager to use, options are: "none" (no connection management) and "basic".

Default: "basic".

Type: string (when unset or "", the default connection manager is applied and all ConnMgr fields are ignored).

Basic Connection Manager

The basic connection manager uses a "high water", a "low water", and internal scoring to periodically close connections to free up resources. When a node using the basic connection manager reaches HighWater idle connections, it will close the least useful ones until it reaches LowWater idle connections.

The connection manager considers a connection idle if:

  • It has not been explicitly protected by some subsystem. For example, Bitswap will protect connections to peers from which it is actively downloading data, the DHT will protect some peers for routing, and the peering subsystem will protect all "peered" nodes.
  • It has existed for longer than the GracePeriod.

Example:

{
  "Swarm": {
    "ConnMgr": {
      "Type": "basic",
      "LowWater": 100,
      "HighWater": 200,
      "GracePeriod": "30s"
    }
  }
}
Swarm.ConnMgr.LowWater

LowWater is the number of connections that the basic connection manager will trim down to.

Default: 600

Type: integer

Swarm.ConnMgr.HighWater

HighWater is the number of connections that, when exceeded, will trigger a connection GC operation. Note: protected/recently formed connections don't count towards this limit.

Default: 900

Type: integer

Swarm.ConnMgr.GracePeriod

GracePeriod is a time duration that new connections are immune from being closed by the connection manager.

Default: "20s"

Type: duration

Swarm.Transports

Configuration section for libp2p transports. An empty configuration will apply the defaults.

Swarm.Transports.Network

Configuration section for libp2p network transports. Transports enabled in this section will be used for dialing. However, to receive connections on these transports, multiaddrs for these transports must be added to Addresses.Swarm.

Supported transports are: QUIC, TCP, WS, and Relay.

Each field in this section is a flag.

Swarm.Transports.Network.TCP

TCP is the most widely used transport by go-ipfs nodes. It doesn't directly support encryption and/or multiplexing, so libp2p will layer a security & multiplexing transport over it.

Default: Enabled

Type: flag

Listen Addresses:

  • /ip4/0.0.0.0/tcp/4001 (default)
  • /ip6/::/tcp/4001 (default)

Swarm.Transports.Network.Websocket

Websocket is a transport usually used to connect to non-browser-based IPFS nodes from browser-based js-ipfs nodes.

While it's enabled by default for dialing, go-ipfs doesn't listen on this transport by default.

Default: Enabled

Type: flag

Listen Addresses:

  • /ip4/0.0.0.0/tcp/4002/ws
  • /ip6/::/tcp/4002/ws

Swarm.Transports.Network.QUIC

QUIC is a UDP-based transport with built-in encryption and multiplexing. The primary benefits over TCP are:

  1. It doesn't require a file descriptor per connection, easing the load on the OS.
  2. It currently takes 2 round trips to establish a connection (our TCP transport currently takes 6).

Default: Enabled

Type: flag

Listen Addresses:

  • /ip4/0.0.0.0/udp/4001/quic (default)
  • /ip6/::/udp/4001/quic (default)

Swarm.Transports.Network.Relay

Libp2p Relay proxy transport that forms connections by hopping between multiple libp2p nodes. This transport is primarily useful for bypassing firewalls and NATs.

Default: Enabled

Type: flag

Listen Addresses: This transport is special. Any node that enables this transport can receive inbound connections on this transport, without specifying a listen address.

Swarm.Transports.Security

Configuration section for libp2p security transports. Transports enabled in this section will be used to secure unencrypted connections.

Security transports are configured with the priority type.

When establishing an outbound connection, go-ipfs will try each security transport in priority order (lower first), until it finds a protocol that the receiver supports. When establishing an inbound connection, go-ipfs will let the initiator choose the protocol, but will refuse to use any of the disabled transports.

Supported transports are: TLS (priority 100), SECIO (Disabled: i.e. priority false), Noise (priority 300).

No default priority will ever be less than 100.

Swarm.Transports.Security.TLS

TLS (1.3) is the default security transport as of go-ipfs 0.5.0. It's also the most scrutinized and trusted security transport.

Default: 100

Type: priority

Swarm.Transports.Security.SECIO

SECIO was the most widely supported IPFS & libp2p security transport. However, it is currently being phased out in favor of more popular and better vetted protocols like TLS and Noise.

Default: false

Type: priority

Swarm.Transports.Security.Noise

Noise is slated to replace TLS as the cross-platform, default libp2p protocol due to ease of implementation. It is currently enabled by default but with low priority as it's not yet widely supported.

Default: 300

Type: priority

Swarm.Transports.Multiplexers

Configuration section for libp2p multiplexer transports. Transports enabled in this section will be used to multiplex duplex connections.

Multiplexer transports are secured the same way security transports are, with the priority type. Like with security transports, the initiator gets their first choice.

Supported transports are: Yamux (priority 100) and Mplex (priority 200)

No default priority will ever be less than 100.

Swarm.Transports.Multiplexers.Yamux

Yamux is the default multiplexer used when communicating between go-ipfs nodes.

Default: 100

Type: priority

Swarm.Transports.Multiplexers.Mplex

Mplex is the default multiplexer used when communicating between go-ipfs and all other IPFS and libp2p implementations. Unlike Yamux:

  • Mplex is a simpler protocol.
  • Mplex is more efficient.
  • Mplex does not have built-in keepalives.
  • Mplex does not support backpressure. Unfortunately, this means that, if a single stream to a peer gets backed up for a period of time, the mplex transport will kill the stream to allow the others to proceed. On the other hand, the lack of backpressure means mplex can be significantly faster on some high-latency connections.

Default: 200

Type: priority