[Support]: Cannot open historical recordings

[markv9401]

Describe the problem you are having

Opening historical recordings is extremely buggy for me, more like only works very rarely. Please see screenshot attached, how there are "dots", thus recordings/events from the May 26 very clearly. Yet if I try clicking any of them, nothing happens. I have to keep clicking numerous times and then and only then sometimes it'll load. Some days work with "less click spamming", some require straight away like 20+, some will never load.

(Please note I'm aware I shouldn't try older recordings done before 0.14beta as per #11589 , this ticket is exclusively about recordings recorded with 0.14beta already. I've made the switch to the beta on the 26th, so anything from the 27th is 100% exclusively 0.14beta recordings, yet the same thing is happening.)

Version

0.14.0-b97e274

Frigate config file

# logging settings
#logger:
#  logs:
#    frigate.record.maintainer: debug

# go2rtc streams - all input streams defined here
go2rtc:
  streams:
    driveway:
      - rtsp://admin:xxxxx@10.31.17.101:554/Streaming/Channels/101
    driveway_sub:
      - rtsp://admin:xxxxx@10.31.17.101:554/Streaming/Channels/102
    Szabadka_str_side:
      - rtsp://admin:xxxxx@10.31.17.102:554/Streaming/Channels/101
    Szabadka_str_side_sub:
      - rtsp://admin:xxxxx@10.31.17.102:554/Streaming/Channels/102
    Drava_str_side:
      - rtsp://admin:xxxxx@10.31.17.103:554/Streaming/Channels/101
    Drava_str_side_sub:
      - rtsp://admin:xxxxx@10.31.17.103:554/Streaming/Channels/102
    porch:
      - rtsp://admin:xxxxx@10.31.17.104:554/Streaming/Channels/101
    porch_sub:
      - rtsp://admin:xxxxx@10.31.17.104:554/Streaming/Channels/102
  webrtc:
    candidates:
      - 10.31.17.100:8555
      - stun:8555

# cameras' definitions - inputs are used from go2rtc
cameras:
  driveway:
    enabled: true
    birdseye:
      order: 1
    ui:
      order: 1
    ffmpeg:
      inputs:
        - path: rtsp://127.0.0.1:8554/driveway
          roles: [record]
        - path: rtsp://127.0.0.1:8554/driveway
          roles: [detect]
    motion:
      mask:
        - 0,147,0,0,772,0,765,151

  porch:
    enabled: true
    birdseye:
      order: 2
    ui:
      order: 2
    ffmpeg:
      inputs:
        - path: rtsp://127.0.0.1:8554/porch
          roles: [record]
        - path: rtsp://127.0.0.1:8554/porch
          roles: [detect]
    motion:
      mask:
        - 0,137,0,0,735,0,746,140

  Szabadka_str_side:
    enabled: true
    birdseye:
      order: 3
    ui:
      order: 3
    ffmpeg:
      inputs:
        - path: rtsp://127.0.0.1:8554/Szabadka_str_side
          roles: [record]
        - path: rtsp://127.0.0.1:8554/Szabadka_str_side
          roles: [detect]
    motion:
      mask:
        - 0,1440,940,1440,736,707,688,316,688,160,748,134,735,0,0,0
        - 0,72,366,72,369,0,0,0

  Drava_str_side:
    enabled: true
    birdseye:
      order: 4
    ui:
      order: 4
    ffmpeg:
      inputs:
        - path: rtsp://127.0.0.1:8554/Drava_str_side
          roles: [record]
        - path: rtsp://127.0.0.1:8554/Drava_str_side
          roles: [detect]
    motion:
      mask:
        - 1664,545,1516,1440,2560,1440,2560,0,1708,0
        - 0,140,751,141,739,0,0,0

##########################################################################################################################

# AMD iGPU acceleration
ffmpeg:
  hwaccel_args: preset-vaapi

# AI Detection type
# Google Coral
detectors:
  coral:
    type: edgetpu
    device: usb

# Frigate+ model
model:
  path: plus://xxxxx

# detection settings
detect:
  enabled: true
  width: 2560
  height: 1440
  fps: 5
  min_initialized: 5
  # Optional: Number of frames without a detection before Frigate considers an object to be gone. (default: 5x the frame rate)
  max_disappeared: 50
  # Optional: Configuration for stationary object tracking
  stationary:
    # Optional: Frequency for confirming stationary objects (default: same as threshold)
    # When set to 1, object detection will run to confirm the object still exists on every frame.
    # If set to 10, object detection will run to confirm the object still exists on every 10th frame.
    interval: 100
     # Optional: Number of frames without a position change for an object to be considered stationary (default: 10x the frame rate or 10s)
    threshold: 100

objects:
  track:
    - person
    - cat
    - dog
  # Frigate+ recommended settings as per https://docs.frigate.video/plus/first_model/#step-4-adjust-your-object-filters-for-higher-scores
  filters:
    dog:
      min_score: .70
      threshold: .9
    cat:
      min_score: .70
      threshold: .9
    person:
      min_score: .75
      threshold: .90

review:
  #alerts:
  #  labels:
  #    - person
  #    - dog
  #    - cat
  detections:
    labels:
      - person
      - dog
      - cat

# MQTT (for HomeAssistant)
mqtt:
  enabled: true
  host: 192.168.0.67
  user: frigate
  password: xxxxx

# Birdseye, live and UI settings
birdseye:
  enabled: true
  mode: continuous
  quality: 1
  height: 720
  restream: true

live:
  height: 1440
  quality: 1

ui:
  live_mode: mse

# recording settings
record:
  enabled: true
  # Optional: Number of minutes to wait between cleanup runs (default: shown below)
  # This can be used to reduce the frequency of deleting recording segments from disk if you want to minimize i/o
  expire_interval: 60
  # Optional: Sync recordings with disk on startup and once a day (default: shown below).
  sync_recordings: true
  # Optional: Retention settings for recording
  retain:
    # Optional: Number of days to retain recordings regardless of events (default: shown below)
    # NOTE: This should be set to 0 and retention should be defined in events section below
    #       if you only want to retain recordings of events.
    days: 7
    # Optional: Mode for retention. Available options are: all, motion, and active_objects
    #   all - save all recording segments regardless of activity
    #   motion - save all recordings segments with any detected motion
    #   active_objects - save all recording segments with active/moving objects
    # NOTE: this mode only applies when the days setting above is greater than 0
    mode: all
  # Optional: Recording Export Settings
  export:
    # Optional: Timelapse Output Args (default: shown below).
    # NOTE: The default args are set to fit 24 hours of recording into 1 hour playback.
    # See https://stackoverflow.com/a/58268695 for more info on how these args work.
    # As an example: if you wanted to go from 24 hours to 30 minutes that would be going
    # from 86400 seconds to 1800 seconds which would be 1800 / 86400 = 0.02.
    # The -r (framerate) dictates how smooth the output video is.
    # So the args would be -vf setpts=0.02*PTS -r 30 in that case.
    timelapse_args: -vf setpts=0.0007*PTS -r 30
  # Optional: Event recording settings
  events:
    # Optional: Number of seconds before the event to include (default: shown below)
    pre_capture: 5
    # Optional: Number of seconds after the event to include (default: shown below)
    post_capture: 5
    # Optional: Objects to save recordings for. (default: all tracked objects)
    #objects:
    #  - person
    # Optional: Restrict recordings to objects that entered any of the listed zones (default: no required zones)
    #required_zones: []
    # Optional: Retention settings for recordings of events
    retain:
      # Required: Default retention days (default: shown below)
      default: 30
      # Optional: Mode for retention. (default: shown below)
      #   all - save all recording segments for events regardless of activity
      #   motion - save all recordings segments for events with any detected motion
      #   active_objects - save all recording segments for event with active/moving objects
      #
      # NOTE: If the retain mode for the camera is more restrictive than the mode configured
      #       here, the segments will already be gone by the time this mode is applied.
      #       For example, if the camera retain mode is "motion", the segments without motion are
      #       never stored, so setting the mode to "all" here won't bring them back.
      mode: all
      # Optional: Per object retention days
      #objects:
      #  person: 15
  preview:
    quality: very_high
  

# snapshots config
snapshots:
  # Optional: Enable writing jpg snapshot to /media/frigate/clips (default: shown below)
  enabled: true
  # Optional: save a clean PNG copy of the snapshot image (default: shown below)
  clean_copy: true
  # Optional: print a timestamp on the snapshots (default: shown below)
  timestamp: false
  # Optional: draw bounding box on the snapshots (default: shown below)
  bounding_box: true
  # Optional: crop the snapshot (default: shown below)
  crop: false
  # Optional: height to resize the snapshot to (default: original size)
  #height: 175
  # Optional: Restrict snapshots to objects that entered any of the listed zones (default: no required zones)
  #required_zones: []
  # Optional: Camera override for retention settings (default: global values)
  retain:
    # Required: Default retention days (default: shown below)
    default: 30
    # Optional: Per object retention days
    #objects:
      #person: 15
  # Optional: quality of the encoded jpeg, 0-100 (default: shown below)
  quality: 100

# telemetry settings
telemetry:
  stats:
    amd_gpu_stats: true
    network_bandwidth: true

Relevant log output

Nothing relevant, no errors.

FFprobe output from your camera

Irrelevant, this ticket is about past recordings.

Frigate stats

No response

Operating system

Proxmox

Install method

Docker Compose

Coral version

USB

Network connection

Wired

Camera make and model

Any other information that may be helpful

No response

[NickM-27]

This has already been fixed