Sharphound starts enumeration then quits

[JeremyS132]

I am running SharpHound as a standard domain user. In the past, we were able to run BloodHound with no issues. I am using the default collection and running it with -verbose. We will get an initial run of 862 objects and it never increases from there all the output continues to show is below:

Initializing BloodHound at 11:40 AM on 2/7/2019
Resolved Collection Methods to Group, LocalGroup, Session, Trusts
Starting Enumeration for [redacted]
Status: 862 objects enumerated (+862 28.73333/s --- Using 90 MB RAM )
Status: 862 objects enumerated (+0 14.36667/s --- Using 90 MB RAM )
Status: 862 objects enumerated (+0 9.577778/s --- Using 47 MB RAM )

I have tried with multiple different options and flags and I cannot seem to get it to work.

[JeremyS132]

Bump anyone have any insight on how to get this working? We didn't have any issues with the old Bloodhound.

[rvazarkar]

Looks like you're running into a crash of some kind. Can you run the exe directly if you're using the .ps1?

[JeremyS132]

Sorry, I forgot to mention I am seeing this error with both the .ps1 and the .exe. They both get to the same point and just die out. They both only seem to enumerate 862 objects.

[rvazarkar]

I just recently pushed several changes, can you update your ingestor and try it again?

[JeremyS132]

Unfortunately, I am still seeing the same issue:

.\SharpHound.exe --Verbose
Initializing BloodHound at 3:27 PM on 2/18/2019
Resolved Collection Methods to Group, LocalAdmin, Session, Trusts, RDP, DCOM
Starting Enumeration for [redacted]
Status: 862 objects enumerated (+862 28.73333/s --- Using 45 MB RAM )
Status: 862 objects enumerated (+0 14.36667/s --- Using 45 MB RAM )
Status: 862 objects enumerated (+0 9.577778/s --- Using 45 MB RAM )
Status: 862 objects enumerated (+0 7.183333/s --- Using 46 MB RAM )

Edit: Seeing the same for both .ps1 and .exe

[rvazarkar]

Can you do collection methods individually so we can narrow down which particular method is causing issues?

[JeremyS132]

I was able to run trusts successfully. I ran session and it appeared that it was going to succeed but I am seeing this:

Status: 1119 objects enumerated (+0 0.5564396/s --- Using 47 MB RAM )
Status: 1119 objects enumerated (+0 0.5482606/s --- Using 47 MB RAM )
Status: 1119 objects enumerated (+0 0.5403187/s --- Using 47 MB RAM )
Status: 1119 objects enumerated (+0 0.5326035/s --- Using 48 MB RAM )
Status: 1119 objects enumerated (+0 0.5251056/s --- Using 48 MB RAM )
Status: 1119 objects enumerated (+0 0.5178158/s --- Using 49 MB RAM )

Ran with the following flags:
.\SharpHound.exe --Verbose --SkipPing --CollectionMethod Session --Domain [redacted] --Threads 20

[rvazarkar]

That happens sometimes, it'll take a while but it'll eventually finish.

[JeremyS132]

Any ideas on how long it would take to finish? I've let it run for quite some time and it still hasn't finished. Still seeing the above.