Overview to use and test this micropython-modbus
library
The onwards described steps assume a successful setup as described in the
[setup chapter](SETUP.md)
This section describes the necessary steps on the MicroPython device to get ready to test and run the examples.
# Linux/Mac
source .venv/bin/activate
rshell -p /dev/tty.SLAB_USBtoUART --editor nano
On a Windows based system activate the virtual environment and enter the remote shell like this
.venv\Scripts\activate.bat
rshell -p COM9
The onwards mentioned commands shall be performed inside the previously entered remote shell.
The available registers can be defined by a JSON file, placed inside the
/pyboard/registers
folder or any other location on the board and loaded in
main.py
or by defining a dictionary.
As an example the registers of a brainelectronics MyEVSE, MyEVSE on Tindie board and others are provided with this repo.
If only an interaction with a single register is intended no dictionary needs to be defined of course. The onwards explanations assume a bigger setup of registers on the same target/client/slave device.
The JSON file/dictionary shall follow the following pattern/structure
{
"COILS": { # this key shall contain all coils
"COIL_NAME": { # custom name of a coil
"register": 42, # register address of the coil
"len": 1, # amount of registers to request aka quantity
"val": 0, # used to set a register
# the onwards mentioned keys are optional
"description": "Optional description of the coil",
"range": "[0, 1]", # may provide a range of the value, only for documentation purpose
"unit": "BOOL" # may provide a unit of the value, only for documentation purpose
}
},
"HREGS": { # this key shall contain all holding registers
"HREG_NAME": { # custom name of a holding register
"register": 93, # register address of the holding register
"len": 1, # amount of registers to request aka quantity
"val": 19, # used to set a register
"description": "Optional description of the holding register",
"range": "[0, 65535]",
"unit": "Hz"
},
},
"ISTS": { # this key shall contain all static input registers
"ISTS_NAME": { # custom name of a static input register
"register": 67, # register address of the static input register
"len": 1, # amount of registers to request aka quantity
"val": 0, # used to set a register, not possible for ISTS
"description": "Optional description of the static input register",
"range": "[0, 1]",
"unit": "activated"
}
},
"IREGS": { # this key shall contain all input registers
"IREG_NAME": { # custom name of an input register
"register": 10, # register address of the input register
"len": 1, # amount of registers to request aka quantity
"val": 60001, # used to set a register, not possible for IREGS
"description": "Optional description of the static input register",
"range": "[0, 65535]",
"unit": "millivolt"
}
}
}
If not all register types are used they can be of course removed from the JSON file/dictionary. The smallest possible definition for reading a coil would look like
{
"COILS": { # this key shall contain all coils
"COIL_NAME": { # custom name of a coil
"register": 42, # register address of the coil
"len": 1 # amount of registers to request aka quantity
}
}
}
In order to act as client/slave device the same structure can be used. If no
val
element is found in the structure the default values are
Type | Function Code | Default value |
---|---|---|
COILS | 0x01 | False (0x0) |
ISTS | 0x02 | False (0x0) |
HREGS | 0x03 | 0 |
IREGS | 0x04 | 0 |
The value of multiple registers can be set like this
{
"HREGS": { # this key shall contain all holding registers
"HREG_NAME": { # custom name of a holding register
"register": 93, # register address of the holding register
"len": 3, # amount of registers to request aka quantity
"val": [29, 38, 0] # used to set a register
}
}
}
.. warning::
As of version `2.0.0 <https://github.com/brainelectronics/micropython-modbus/releases/tag/2.0.0>`_
of this package it is not possible to request only the holding register
`94`, which would hold `38` in the above example.
This is a bug (non implemented feature) of the client/slave implementation.
For further details check `issue #35 <https://github.com/brainelectronics/micropython-modbus/issues/35>`_
The onwards described key explanations are valid for COIL, HREG, IST and IREG
The key register
defines the register to request or manipulate.
According to the Modbus specification the register address has to be in the range of 0x0000 to 0xFFFF (65535) to be valid.
The key len
defines the amout of registers to be requested starting from/with
the defined register
address.
According to the Modbus specification the length or amount depends on the type of the register as summarized in the table below.
Type | Function Code | Valid range |
---|---|---|
COILS | 0x01 | 0x1 to 0x7D0 (2000) |
ISTS | 0x02 | 0x1 to 0x7D0 (2000) |
HREGS | 0x03 | 0x1 to 0x7D (125) |
IREGS | 0x04 | 0x1 to 0x7D (125) |
In order to read 5 coils starting at 124 use the following dictionary aka config
{
"COILS": { # this key shall contain all coils
"COIL_NAME": { # custom name of a coil
"register": 124, # register address of the coil
"len": 5 # amount of registers to request aka quantity
}
}
}
The output will be a list of 5 elements like [True, False, False, True, True]
depending on the actual device coil states of course.
The key val
defines the value of registers to be set on the target/client
device.
According to the Modbus specification the value (range) depends on the type of the register as summarized in the table below.
Type | Function Code | Valid value | Comment |
---|---|---|---|
COILS | 0x05 | 0x0000 or 0xFF00 | This package maps 0 or False to 0x0000 and 1 or True to 0xFF00 |
HREGS | 0x06 | 0x0000 to 0xFFFF (65535) |
The optional key description
can be used to provide an additional
description of the register. This might be helpful if the register name is not
meaninful enough or for any other reason of course.
The optional key range
can be used to indicate the possible value range of
this specific target. For example a holding register for setting a PWM output
might only support a range of 0 to 100. This might be especially helpful with
the optional unit
key.
The optional key unit
can be used to provide further details about the unit
of the register. In case of the PWM output register example of the
optional range key the recommended value for this key could
be percent
.
This section describes the usage of the following available functions
- 0x01
read_coils
- 0x02
read_discrete_inputs
- 0x03
read_holding_registers
- 0x04
read_input_registers
- 0x05
write_single_coil
- 0x06
write_single_register
- 0x0F
write_multiple_coils
- 0x10
write_multiple_registers
based on TCP togehter with the latest provided examples
All described functions require a successful setup of a Host communicating to/with a Client device which is providing the data and accepting the new data.
from umodbus.tcp import TCP as ModbusTCPMaster
slave_tcp_port = 502 # port to listen to
slave_addr = 10 # bus address of client
slave_ip = '192.168.178.69' # IP address, to be adjusted
host = ModbusTCPMaster(
slave_ip=slave_ip,
slave_port=slave_tcp_port,
timeout=5) # optional, default 5
Coils represent binary states, which can be get as and set to either 0
(off)
or 1
(on).
The function code `0x01` is used to read from 1 to 2000 contiguous status of
coils in a remote device.
With the function read_coils
a single coil
status can be read.
coil_address = 125
coil_qty = 2
coil_status = host.read_coils(
slave_addr=slave_addr,
starting_addr=coil_address,
coil_qty=coil_qty)
print('Status of COIL {}: {}'.format(coil_address, coil_status))
# Status of COIL 125: [True, False]
.. warning::
Please be aware of `bug #35 <https://github.com/brainelectronics/micropython-modbus/issues/35>`_.
It is not possible to read a specific position within a configured list of
multiple coils on a MicroPython Modbus TCP client device. Reading coil 126
in the above example will throw an error.
This bug affects only devices using this package. Other devices work as
expected and can be addressed as specified.
Coils can be set with False
or 0
to the OFF
state and with True
or 1
to the ON
state.
The function code `0x05` is used to write a single output to either `ON` or
`OFF` in a remote device.
With the function write_single_coil
a single coil status can be set.
coil_address = 123
new_coil_val = 0
operation_status = host.write_single_coil(
slave_addr=slave_addr,
output_address=coil_address,
output_value=new_coil_val)
print('Result of setting COIL {}: {}'.format(coil_address, operation_status))
# Result of setting COIL 123: True
.. warning::
Please be aware of `bug #15 <https://github.com/brainelectronics/micropython-modbus/issues/15>`_.
It is not possible to write to a specific position within a configured
list of multiple coils on a MicroPython Modbus TCP client device.
This bug affects only devices using this package. Other devices work as
expected and can be addressed as specified.
The function code `0x0F` is used to force each coil in a sequence of coils to
either `ON` or `OFF` in a remote device.
With the function write_multiple_coils
multiple coil states can be set at once.
coil_address = 126
new_coil_vals = [1, 1, 0]
operation_status = self._host.write_multiple_coils(
slave_addr=slave_addr,
starting_address=coil_address,
output_values=new_coil_vals)
print('Result of setting COIL {}: {}'.format(coil_address, operation_status))
# Result of setting COIL 126: True
.. warning::
Please be aware of `bug #35 <https://github.com/brainelectronics/micropython-modbus/issues/35>`_.
It is not possible to write to a specific position within a configured
list of multiple coils on a MicroPython Modbus TCP client device. Setting
coil `127`, which is `1` in the above example will throw an error.
This bug affects only devices using this package. Other devices work as
expected and can be addressed as specified.
Discrete inputs represent binary states, which can be get as either 0
(off)
or 1
(on). Unlike coils, these cannot be set.
The function code `0x02` is used to read from 1 to 2000 contiguous status of
discrete inputs in a remote device.
With the function read_discrete_inputs
discrete inputs can be read.
ist_address = 68
input_qty = 2
input_status = host.read_discrete_inputs(
slave_addr=slave_addr,
starting_addr=ist_address,
input_qty=input_qty)
print('Status of IST {}: {}'.format(ist_address, input_status))
# Status of IST 68: [True, False]
Holding registers can be get as and set to any value between 0
and 65535
.
If supported by the client device, data can be marked as signed values to
represent -32768
through 32767
.
The function code `0x03` is used to read the contents of a contiguous block
of holding registers in a remote device.
With the function
read_holding_registers
a single
holding register can be read.
hreg_address = 94
register_qty = 3
register_value = host.read_holding_registers(
slave_addr=slave_addr,
starting_addr=hreg_address,
register_qty=register_qty,
signed=False)
print('Status of HREG {}: {}'.format(hreg_address, register_value))
# Status of HREG 94: [29, 38, 0]
.. warning::
Please be aware of `bug #35 <https://github.com/brainelectronics/micropython-modbus/issues/35>`_.
It is not possible to read a specific position within a configured list of
multiple holding registers on a MicroPython Modbus TCP client device.
Reading holding register `95`, holding the value `38` in the above example
will throw an error.
This bug affects only devices using this package. Other devices work as
expected and can be addressed as specified.
Holding registers can be set to 0
through 65535
or -32768
through 32767
in case signed values are used.
The function code `0x06` is used to write a single holding register in a
remote device.
With the function
write_single_register
a single
holding register can be set.
hreg_address = 93
new_hreg_val = 44
operation_status = host.write_single_register(
slave_addr=slave_addr,
register_address=hreg_address,
register_value=new_hreg_val,
signed=False)
print('Result of setting HREG {}: {}'.format(hreg_address, operation_status))
# Result of setting HREG 93: True
The function code `0x10` is used to write a block of contiguous registers
(1 to 123 registers) in a remote device.
With the function
write_multiple_registers
holding register can be set at once.
hreg_address = 94
new_hreg_vals = [54, -12, 30001]
operation_status = self._host.write_multiple_registers(
slave_addr=slave_addr,
starting_address=hreg_address,
register_values=new_hreg_vals,
signed=True)
print('Result of setting HREG {}: {}'.format(hreg_address, operation_status))
# Result of setting HREG 94: True
.. warning::
Please be aware of `bug #35 <https://github.com/brainelectronics/micropython-modbus/issues/35>`_.
It is not possible to write to a specific position within a configured
list of multiple holding registers on a MicroPython Modbus TCP client
device. Setting holding register `95 + 96` to e.g. `[-12, 30001]` in the
above example will throw an error.
This bug affects only devices using this package. Other devices work as
expected and can be addressed as specified.
Input registers can hold values between 0
and 65535
. If supported by the
client device, data can be marked as signed values to represent -32768
through 32767
. Unlike holding registers, these cannot
be set.
The function code `0x04` is used to read from 1 to 125 contiguous input
registers in a remote device.
With the function read_input_registers
input registers can be read.
ireg_address = 11
register_qty = 3
register_value = host.read_input_registers(
slave_addr=slave_addr,
starting_addr=ireg_address,
register_qty=register_qty,
signed=False)
print('Status of IREG {}: {}'.format(ireg_address, register_value))
# Status of IREG 11: [59123, 0, 390]
Get two network capable boards up and running, collecting and setting data on each other.
Adjust the WiFi network name (SSID) and password to be able to connect to your personal network or remove that section if a wired network connection is used.
The client, former known as slave, provides some dummy registers which can be read and updated by another device.
cp examples/tcp_client_example.py /pyboard/main.py
cp examples/boot.py /pyboard/boot.py
repl
Inside the REPL press CTRL+D to perform a soft reboot. The device will serve several registers now. The log output might look similar to this
MPY: soft reboot
System booted successfully!
Waiting for WiFi connection...
Waiting for WiFi connection...
Connected to WiFi.
('192.168.178.69', '255.255.255.0', '192.168.178.1', '192.168.178.1')
Setting up registers ...
Register setup done
Serving as TCP client on 192.168.178.69:502
The host, former known as master, requests and updates some dummy registers of another device.
cp examples/tcp_host_example.py /pyboard/main.py
cp examples/boot.py /pyboard/boot.py
repl
Inside the REPL press CTRL+D to perform a soft reboot. The device will request and update registers of the Client after a few seconds. The log output might look similar to this
MPY: soft reboot
System booted successfully!
Waiting for WiFi connection...
Waiting for WiFi connection...
Connected to WiFi.
('192.168.178.42', '255.255.255.0', '192.168.178.1', '192.168.178.1')
Requesting and updating data on TCP client at 192.168.178.69:502
Status of COIL 123: [True, False, False, False, False, False, False, False]
Result of setting COIL 123: True
Status of COIL 123: [False, False, False, False, False, False, False, False]
Status of HREG 93: (44,)
Result of setting HREG 93: True
Status of HREG 93: (44,)
Status of IST 67: [False, False, False, False, False, False, False, False]
Status of IREG 10: (60001,)
Finished requesting/setting data on client
MicroPython v1.18 on 2022-01-17; ESP32 module (spiram) with ESP32
Type "help()" for more information.
>>>
This example implementation shows how to act as bridge between an RTU (serial) connected device and another external TCP device.
For further details about a TCP-RTU bridge implementation check the header
comment of main.py
.
This section describes the necessary steps on the computer to get ready to test and run the examples.
# Linux/Mac
source .venv/bin/activate
On a Windows based system activate the virtual environment like this
.venv\Scripts\activate.bat
The onwards mentioned commands shall be performed inside the previously activated virtual environment.
Read and write the Modbus register data from a MicroPython device with the brainelectronics ModbusWrapper provided with the modules submodule
python modules/read_device_info_registers.py \
--file=registers/example.json \
--connection=tcp \
--address=192.168.178.69 \
--port=502 \
--print \
--pretty \
--debug \
--verbose=3
Or use the even more convenient wrapper script for the wrapper.
cd examples
sh read_registers_tcp.sh 192.168.178.69 ../registers/example.json 502
python modules/write_device_info_registers.py \
--file=registers/set-example.json \
--connection=tcp \
--address=192.168.178.69 \
--port=502 \
--print \
--pretty \
--debug \
--verbose=3
Or use the even more convenient wrapper script for the wrapper.
cd examples
sh write_registers_tcp.sh 192.168.178.69 ../registers/set-example.json 502
Checkout the available MicroPython containers
docker pull micropython/unix:v1.18
Use this command for your first tests or to run some MicroPython commands in a simple REPL
docker run -it \
--name micropython-1.18 \
--network=host \
--entrypoint bash \
micropython/unix:v1.18
Inside the container enter the REPL by running micropython-dev
. The console
should now look similar to this
root@debian:/home#
MicroPython v1.18 on 2022-01-17; linux version
Use Ctrl-D to exit, Ctrl-E for paste mode
>>>
In order to manually execute only a specific set of tests use the following command inside the container
# run all unittests defined in "tests" directory and exit with status result
micropython-dev -c "import unittest; unittest.main('tests')"
# run all tests of "TestAbsoluteTruth" defined in tests/test_absolute_truth.py
# and exit with status result
micropython-dev -c "import unittest; unittest.main(name='tests.test_absolute_truth', fromlist=['TestAbsoluteTruth'])"
docker build \
--tag micropython-test \
--file Dockerfile.tests .
The unittests are executed during the building process. It will exit with a non-zero status in case of a unittest failure.
The return value can be collected by echo $?
(on Linux based systems), which
will be either 0
in case all tests passed, or 1
if one or multiple tests
failed.
The following command uses the setup defined in the docker-compose.yaml
file
to act as two MicroPython devices communicating via TCP. The container
micropython-host
defined by Dockerfile.host
acts as host and sets/gets
data at/from the client as defined by tcp_host_example.py
. On the other hand
the container micropython-client
defined by Dockerfile.client
acts as
client and provides data for the host as defined by tcp_client_example.py
.
The port defined in tcp_host_example.py
and tcp_client_example.py
has to
be open and optionally exposed in the docker-compose.yaml
file.
docker compose up --build --exit-code-from micropython-host
The option --build
can be skipped on the second run, to avoid rebuilds of
the containers. All "dynamic" data is shared via volumes
docker compose -f docker-compose-tcp-test.yaml up --build --exit-code-from micropython-host
The documentation is automatically generated on every merge to the develop branch and available here
# create and activate virtual environment
python3 -m venv .venv
source .venv/bin/activate
# install and upgrade required packages
pip install -U -r docs/requirements.txt
Some usefull checks have been disabled in the docs/conf.py
file. Please
check the documentation build output locally before opening a PR.
# perform link checks
sphinx-build docs/ docs/build/linkcheck -d docs/build/docs_doctree/ --color -blinkcheck -j auto -W
# create documentation
sphinx-build docs/ docs/build/html/ -d docs/build/docs_doctree/ --color -bhtml -j auto -W
The created documentation can be found at docs/build/html
.