Integration with Shinobi Video NVR. Creates the following components:
- Camera - per-camera defined.
- Binary Sensors (MOTION, SOUND) - per-camera defined.
- Support HLS Streams instead of H264.
- Support SSL with self-signed certificate.
- Support Face-Recognition plugin as an event
- Shinobi Video Server available with credentials
- MQTT Integration is optional - it will allow listening to Shinobi Video event
DeepStack-Face DeepStack-Object
- In HACS, look for "Shinobi Video NVR" and install
- In Configuration --> Integrations - Add Shinobi Video NVR
Fields name | Type | Required | Default | Description |
---|---|---|---|---|
Host | Texbox | + | None | Hostname or IP address of the Shinobi Video server |
Port | Textbox | + | 0 | HTTP Port to access Shinobi Video server |
SSL | Check-box | + | Unchecked | Is SSL supported? |
Username | Textbox | - | Username of dashboard user for Shinobi Video server | |
Password | Textbox | - | Password of dashboard user for Shinobi Video server |
Fields name | Type | Required | Default | Description |
---|---|---|---|---|
Host | Texbox | + | ast stored hostname | Hostname or IP address of the Shinobi Video server |
Port | Textbox | + | 0ast stored port | HTTP Port to access Shinobi Video server |
SSL | Check-box | + | Last stored SSL flag | Is SSL supported? |
Username | Textbox | - | Last stored username | Username of dashboard user for Shinobi Video server |
Password | Textbox | - | Last stored password | Password of dashboard user for Shinobi Video server |
Log level | Drop-down | + | Default | Changes component's log level (more details below) |
Log Level's drop-down
New feature to set the log level for the component without need to set log_level in customization:
and restart or call manually logger.set_level
and loose it after restart.
Upon startup or integration's option update, based on the value chosen, the component will make a service call to logger.set_level
for that component with the desired value,
In case Default
option is chosen, flow will skip calling the service, after changing from any other option to Default
, it will not take place automatically, only after restart
Upon submitting the form of creating an integration or updating options,
Component will try to log in into the Shinobi Video server to verify new settings, following errors can appear:
- Integration already configured with the same title
- Invalid server details - Cannot reach the server
If a persistent notification popped up with the following message:
Encryption key got corrupted, please remove the integration and re-add it
It means that encryption key was modified from outside the code, Please remove the integration and re-add it to make it work again.
Binary sensor are relying on MQTT, you will need to set up in Shinobi Video Server MQTT plugin and configure each of the monitors to trigger MQTT message.
Each binary sensor will have the name pattern - {Integration Title} {Camera Name} {Sound / Motion}, Once triggered, the following details will be added to the attributes of the binary sensor:
Attributes | Description |
---|---|
name | Event name - Yolo / Tensorflow / DeepStack-Object / audio |
reason | Event details - object / soundChange |
tags | relevant for motion only with object detection, will represent the detected object |
Represents whether the camera is triggered for noise or not
Represents whether the camera is triggered for motion or not
State: Idle
Attributes | Available values |
---|---|
Status | Recording, |
Mode | stop (Disabled), start (Watch-Only), record (Record) |
Type | H264, MJPEG, |
FPS | - |
Supported by DeepStack-Face plugin only,
Will publish event name shinobi/face_recognition
, payload will be the same as in the MQTT message