Kintex-7 FPGA KC705
- Command Line access (using xillybus executable)
hexdump.exe -C -v -n 32 \\.\xillybus_mem_8
- Write register:
memwrite.exe \\.\xillybus_mem_8 [address] [value]
- Read register:
memread.exe \\.\xillybus_mem_8 [address]
[ Register Table ]
| Address | Value | Description |
|---|---|---|
| 1 | 15 | Reset |
| 2 | 10 | Set |
| 3 | 15 | Start |
| 4 | 15 | Stop |
| 5 | (reserved) | |
| 6 | (reserved) | |
| 7 | FIFO Full Flag (value = 1, when FIFO is full, otherwise 0 ) | |
| 8 | Sensor Chip address (default = 0 is set in the firmware) | |
| 9 | (reserved) | |
| 10 | Row Start. When set command is issued, the value is set. (default = 0) | |
| 11 | Row End (default = 47) | |
| 12 | Column Start (default = 0) | |
| 13 | Column End (default = 15) | |
| 14 | (reserved) | |
| 15 | (reserved) | |
| 16 | (reserved) |