Need Help - S905W Device - Armbian - Debian Bullseye and Buster #20
Comments
|
I am not sure if this package works with Armbian since it is build for Raspbian. However, you can check #12. Maybe lighttpd that is used by pi-hole is using port 80 and therefore check_mk's apache is not able to start. Just a guess. Apart from that I can only advise you to use Raspbian if possible. |
|
ok i try it later with armbian :) now i try it with raspberry - 2020-02-13-raspbian-buster-lite.img pi@raspberrypi:~ $ sudo apt update dpkg: error processing package check-mk-raw-1.6.0p10 (--install): Creating config file /etc/samba/smb.conf with new version Creating config file /etc/php/7.3/mods-available/calendar.ini with new version Creating config file /etc/php/7.3/mods-available/ctype.ini with new version Creating config file /etc/php/7.3/mods-available/exif.ini with new version Creating config file /etc/php/7.3/mods-available/fileinfo.ini with new version Creating config file /etc/php/7.3/mods-available/ftp.ini with new version Creating config file /etc/php/7.3/mods-available/gettext.ini with new version Creating config file /etc/php/7.3/mods-available/iconv.ini with new version Creating config file /etc/php/7.3/mods-available/pdo.ini with new version Creating config file /etc/php/7.3/mods-available/phar.ini with new version Creating config file /etc/php/7.3/mods-available/posix.ini with new version Creating config file /etc/php/7.3/mods-available/shmop.ini with new version Creating config file /etc/php/7.3/mods-available/sockets.ini with new version Creating config file /etc/php/7.3/mods-available/sysvmsg.ini with new version Creating config file /etc/php/7.3/mods-available/sysvsem.ini with new version Creating config file /etc/php/7.3/mods-available/sysvshm.ini with new version Creating config file /etc/php/7.3/mods-available/tokenizer.ini with new version Creating config file /etc/php/7.3/mods-available/opcache.ini with new version Creating config file /etc/php/7.3/mods-available/sqlite3.ini with new version Creating config file /etc/php/7.3/mods-available/pdo_sqlite.ini with new version Creating config file /etc/php/7.3/mods-available/json.ini with new version Creating config file /etc/php/7.3/mods-available/readline.ini with new version Creating config file /etc/php/7.3/mods-available/dom.ini with new version Creating config file /etc/php/7.3/mods-available/simplexml.ini with new version Creating config file /etc/php/7.3/mods-available/wddx.ini with new version Creating config file /etc/php/7.3/mods-available/xml.ini with new version Creating config file /etc/php/7.3/mods-available/xmlreader.ini with new version Creating config file /etc/php/7.3/mods-available/xmlwriter.ini with new version Creating config file /etc/php/7.3/mods-available/xsl.ini with new version Creating config file /etc/php/7.3/cli/php.ini with new version Creating config file /etc/php/7.3/cgi/php.ini with new version Creating config file /etc/php/7.3/mods-available/gd.ini with new version Creating config file /etc/php/7.3/apache2/php.ini with new version Done URL: 404 Not Found Apache/2.4.38 (Raspbian) Server at IP Port 80 The same at http://IP/mysite/ |
|
OK solve with raspberrry pi pi@raspberrypi:~ $ omd status The site can be started with omd start SITENAME. The admin user for the web applications is cmkadmin with password: XXXXXXXX root@raspberrypi: later one more time with Armbian :) |
if i follow your installation instructions i get the following errors, if in the last command i agree it removes the whole armbian environment after that checkmk doesn't work either, do you have an idea why? i'm desperate - i just want to have pihole and checkmk running on it :(
The Box:
A95X F1 - Amlogic S905W
_ __ __ _ ____ ___
/ \ | / | | / |/ _ _ ____ ____ __
/ _ \ | |/| | | __ \ () \ / /\ / /\ / /
/ ___ | | | | |||) _, |> < > < > <
// __| |_|__| |/ ////_//_//_\
Welcome to Armbian bullseye with Linux 5.5.0-rc6-aml-s9xxx
root@LBOX:
# cat /etc/issue# uname -rArmbian 20.02.0-rc1.038 Bullseye \l
root@LBOX:
5.5.0-rc6-aml-s9xxx
root@LBOX:~# uname -a
Linux LBOX 5.5.0-rc6-aml-s9xxx #rc1.038 SMP PREEMPT Thu Feb 6 09:49:22 MSK 2020 aarch64 GNU/Linux
root@LBOX:
# curl -LO $(curl -s https://api.github.com/repos/chrisss404/check-mk-arm/releases/latest | grep browser_download_url | cut -d '"' -f 4)# dpkg -i check-mk-raw-*_armhf.deb% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 631 100 631 0 0 1894 0 --:--:-- --:--:-- --:--:-- 1894
100 74.5M 100 74.5M 0 0 8450k 0 0:00:09 0:00:09 --:--:-- 9.8M
root@LBOX:
Vormals nicht ausgewähltes Paket check-mk-raw-1.6.0p10:armhf wird gewählt.
(Lese Datenbank ... 35363 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von check-mk-raw-1.6.0p10_0.buster_armhf.deb ...
Entpacken von check-mk-raw-1.6.0p10:armhf (0.buster) ...
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von check-mk-raw-1.6.0p10:armhf:
check-mk-raw-1.6.0p10:armhf hängt ab von time.
check-mk-raw-1.6.0p10:armhf hängt ab von traceroute.
check-mk-raw-1.6.0p10:armhf hängt ab von dialog.
check-mk-raw-1.6.0p10:armhf hängt ab von dnsutils.
check-mk-raw-1.6.0p10:armhf hängt ab von graphviz.
check-mk-raw-1.6.0p10:armhf hängt ab von apache2.
check-mk-raw-1.6.0p10:armhf hängt ab von libdbi1.
check-mk-raw-1.6.0p10:armhf hängt ab von libevent-2.1-6.
check-mk-raw-1.6.0p10:armhf hängt ab von libgd3.
check-mk-raw-1.6.0p10:armhf hängt ab von libltdl7.
check-mk-raw-1.6.0p10:armhf hängt ab von libpango1.0-0.
check-mk-raw-1.6.0p10:armhf hängt ab von libperl5.28.
check-mk-raw-1.6.0p10:armhf hängt ab von libreadline7.
check-mk-raw-1.6.0p10:armhf hängt ab von libuuid1.
check-mk-raw-1.6.0p10:armhf hängt ab von binutils.
check-mk-raw-1.6.0p10:armhf hängt ab von rpm.
check-mk-raw-1.6.0p10:armhf hängt ab von php.
check-mk-raw-1.6.0p10:armhf hängt ab von php-cgi.
check-mk-raw-1.6.0p10:armhf hängt ab von php-cli.
check-mk-raw-1.6.0p10:armhf hängt ab von php-gd.
check-mk-raw-1.6.0p10:armhf hängt ab von php-sqlite3.
check-mk-raw-1.6.0p10:armhf hängt ab von php-pear.
check-mk-raw-1.6.0p10:armhf hängt ab von smbclient.
check-mk-raw-1.6.0p10:armhf hängt ab von rpcbind.
check-mk-raw-1.6.0p10:armhf hängt ab von lcab.
check-mk-raw-1.6.0p10:armhf hängt ab von xinetd.
check-mk-raw-1.6.0p10:armhf hängt ab von libfreeradius3.
check-mk-raw-1.6.0p10:armhf hängt ab von libpcap0.8.
check-mk-raw-1.6.0p10:armhf hängt ab von libgsf-1-114.
check-mk-raw-1.6.0p10:armhf hängt ab von libglib2.0-0.
check-mk-raw-1.6.0p10:armhf hängt ab von poppler-utils.
check-mk-raw-1.6.0p10:armhf hängt ab von libffi6.
check-mk-raw-1.6.0p10:armhf hängt ab von libssl1.1.
check-mk-raw-1.6.0p10:armhf hängt ab von libpq5.
check-mk-raw-1.6.0p10:armhf hängt ab von libnl-3-200.
dpkg: Fehler beim Bearbeiten des Paketes check-mk-raw-1.6.0p10:armhf (--install):
Abhängigkeitsprobleme - verbleibt unkonfiguriert
Trigger für systemd (244.3-1) werden verarbeitet ...
Trigger für man-db (2.9.1-1) werden verarbeitet ...
Fehler traten auf beim Bearbeiten von:
check-mk-raw-1.6.0p10:armhf
root@LBOX:~# apt-get install -f
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Abhängigkeiten werden korrigiert ... Fertig
Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt:
apt-file distro-info-data gir1.2-glib-2.0 gir1.2-packagekitglib-1.0 iso-codes libapt-pkg-perl libbind9-161 libdns1104 libdns1109 libexporter-tiny-perl libfstrm0 libgeoip1
libgirepository-1.0-1 libiptc0 libirs161 libisc1100 libisc1105 libisccc161 libisccfg163 liblist-moreutils-perl liblmdb0 liblwres161 libmaxminddb0 libmpdec2 libpackagekit-glib2-18
libprocps7 libprotobuf-c1 libpython3-stdlib libpython3.7-minimal libpython3.7-stdlib libpython3.8-minimal libpython3.8-stdlib libregexp-assemble-perl python-apt-common python3.7
python3.7-minimal
Verwenden Sie »apt autoremove«, um sie zu entfernen.
Die folgenden zusätzlichen Pakete werden installiert:
apache2-utils libapr1 libaprutil1 libfribidi0
Die folgenden Pakete werden ENTFERNT:
armbian-config bind9-host check-mk-raw-1.6.0p10:armhf command-not-found dialog dnsutils iotop linux-bullseye-root-current-aml-s9xxx lsb-release networkd-dispatcher python3
python3-apt python3-dbus python3-distro-info python3-gi python3-minimal python3-pycurl python3-software-properties python3.8 python3.8-minimal software-properties-common
unattended-upgrades
Die folgenden NEUEN Pakete werden installiert:
apache2-utils libapr1 libaprutil1 libfribidi0
0 aktualisiert, 4 neu installiert, 22 zu entfernen und 0 nicht aktualisiert.
1 nicht vollständig installiert oder entfernt.
Es müssen 488 kB an Archiven heruntergeladen werden.
Nach dieser Operation werden 427 MB Plattenplatz freigegeben.
Möchten Sie fortfahren? [Y/n]
The text was updated successfully, but these errors were encountered: