types.go

// Copyright 2015 The Kubernetes Authors.
// Copyright 2020-2021 Authors of Cilium
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

package v1

import (
	slim_metav1 "github.com/cilium/cilium/pkg/k8s/slim/k8s/apis/meta/v1"
)

// Protocol defines network protocols supported for things like container ports.
type Protocol string

const (
	// ProtocolTCP is the TCP protocol.
	ProtocolTCP Protocol = "TCP"
	// ProtocolUDP is the UDP protocol.
	ProtocolUDP Protocol = "UDP"
	// ProtocolSCTP is the SCTP protocol.
	ProtocolSCTP Protocol = "SCTP"
)

// ContainerPort represents a network port in a single container.
type ContainerPort struct {
	// If specified, this must be an IANA_SVC_NAME and unique within the pod. Each
	// named port in a pod must have a unique name. Name for the port that can be
	// referred to by services.
	// +optional
	Name string `json:"name,omitempty" protobuf:"bytes,1,opt,name=name"`
	// Number of port to expose on the host.
	// If specified, this must be a valid port number, 0 < x < 65536.
	// If HostNetwork is specified, this must match ContainerPort.
	// Most containers do not need this.
	// +optional
	HostPort int32 `json:"hostPort,omitempty" protobuf:"varint,2,opt,name=hostPort"`
	// Number of port to expose on the pod's IP address.
	// This must be a valid port number, 0 < x < 65536.
	ContainerPort int32 `json:"containerPort" protobuf:"varint,3,opt,name=containerPort"`
	// Protocol for port. Must be UDP, TCP, or SCTP.
	// Defaults to "TCP".
	// +optional
	// +default="TCP"
	Protocol Protocol `json:"protocol,omitempty" protobuf:"bytes,4,opt,name=protocol,casttype=Protocol"`
	// What host IP to bind the external port to.
	// +optional
	HostIP string `json:"hostIP,omitempty" protobuf:"bytes,5,opt,name=hostIP"`
}

// VolumeMount describes a mounting of a Volume within a container.
type VolumeMount struct {
	// Path within the container at which the volume should be mounted.  Must
	// not contain ':'.
	MountPath string `json:"mountPath" protobuf:"bytes,3,opt,name=mountPath"`
}

// A single application container that you want to run within a pod.
type Container struct {
	// Name of the container specified as a DNS_LABEL.
	// Each container in a pod must have a unique name (DNS_LABEL).
	// Cannot be updated.
	Name string `json:"name" protobuf:"bytes,1,opt,name=name"`
	// Docker image name.
	// More info: https://kubernetes.io/docs/concepts/containers/images
	// This field is optional to allow higher level config management to default or override
	// container images in workload controllers like Deployments and StatefulSets.
	// +optional
	Image string `json:"image,omitempty" protobuf:"bytes,2,opt,name=image"`
	// List of ports to expose from the container. Exposing a port here gives
	// the system additional information about the network connections a
	// container uses, but is primarily informational. Not specifying a port here
	// DOES NOT prevent that port from being exposed. Any port which is
	// listening on the default "0.0.0.0" address inside a container will be
	// accessible from the network.
	// Cannot be updated.
	// +optional
	// +patchMergeKey=containerPort
	// +patchStrategy=merge
	// +listType=map
	// +listMapKey=containerPort
	// +listMapKey=protocol
	Ports []ContainerPort `json:"ports,omitempty" patchStrategy:"merge" patchMergeKey:"containerPort" protobuf:"bytes,6,rep,name=ports"`
	// Pod volumes to mount into the container's filesystem.
	// Cannot be updated.
	// +optional
	// +patchMergeKey=mountPath
	// +patchStrategy=merge
	VolumeMounts []VolumeMount `json:"volumeMounts,omitempty" patchStrategy:"merge" patchMergeKey:"mountPath" protobuf:"bytes,9,rep,name=volumeMounts"`
}

type ConditionStatus string

// These are valid condition statuses. "ConditionTrue" means a resource is in the condition.
// "ConditionFalse" means a resource is not in the condition. "ConditionUnknown" means kubernetes
// can't decide if a resource is in the condition or not. In the future, we could add other
// intermediate conditions, e.g. ConditionDegraded.
const (
	ConditionTrue    ConditionStatus = "True"
	ConditionFalse   ConditionStatus = "False"
	ConditionUnknown ConditionStatus = "Unknown"
)

// PodPhase is a label for the condition of a pod at the current time.
type PodPhase string

// These are the valid statuses of pods.
const (
	// PodPending means the pod has been accepted by the system, but one or more of the containers
	// has not been started. This includes time before being bound to a node, as well as time spent
	// pulling images onto the host.
	PodPending PodPhase = "Pending"
	// PodRunning means the pod has been bound to a node and all of the containers have been started.
	// At least one container is still running or is in the process of being restarted.
	PodRunning PodPhase = "Running"
	// PodSucceeded means that all containers in the pod have voluntarily terminated
	// with a container exit code of 0, and the system is not going to restart any of these containers.
	PodSucceeded PodPhase = "Succeeded"
	// PodFailed means that all containers in the pod have terminated, and at least one container has
	// terminated in a failure (exited with a non-zero exit code or was stopped by the system).
	PodFailed PodPhase = "Failed"
	// PodUnknown means that for some reason the state of the pod could not be obtained, typically due
	// to an error in communicating with the host of the pod.
	PodUnknown PodPhase = "Unknown"
)

// PodConditionType is a valid value for PodCondition.Type
type PodConditionType string

// These are valid conditions of pod.
const (
	// ContainersReady indicates whether all containers in the pod are ready.
	ContainersReady PodConditionType = "ContainersReady"
	// PodInitialized means that all init containers in the pod have started successfully.
	PodInitialized PodConditionType = "Initialized"
	// PodReady means the pod is able to service requests and should be added to the
	// load balancing pools of all matching services.
	PodReady PodConditionType = "Ready"
	// PodScheduled represents status of the scheduling process for this pod.
	PodScheduled PodConditionType = "PodScheduled"
)

// These are reasons for a pod's transition to a condition.
const (
	// PodReasonUnschedulable reason in PodScheduled PodCondition means that the scheduler
	// can't schedule the pod right now, for example due to insufficient resources in the cluster.
	PodReasonUnschedulable = "Unschedulable"
)

// PodCondition contains details for the current condition of this pod.
type PodCondition struct {
	// Type is the type of the condition.
	// More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#pod-conditions
	Type PodConditionType `json:"type" protobuf:"bytes,1,opt,name=type,casttype=PodConditionType"`
	// Status is the status of the condition.
	// Can be True, False, Unknown.
	// More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#pod-conditions
	Status ConditionStatus `json:"status" protobuf:"bytes,2,opt,name=status,casttype=ConditionStatus"`
	// Last time we probed the condition.
	// +optional
	LastProbeTime slim_metav1.Time `json:"lastProbeTime,omitempty" protobuf:"bytes,3,opt,name=lastProbeTime"`
	// Last time the condition transitioned from one status to another.
	// +optional
	LastTransitionTime slim_metav1.Time `json:"lastTransitionTime,omitempty" protobuf:"bytes,4,opt,name=lastTransitionTime"`
	// Unique, one-word, CamelCase reason for the condition's last transition.
	// +optional
	Reason string `json:"reason,omitempty" protobuf:"bytes,5,opt,name=reason"`
	// Human-readable message indicating details about last transition.
	// +optional
	Message string `json:"message,omitempty" protobuf:"bytes,6,opt,name=message"`
}

// The node this Taint is attached to has the "effect" on
// any pod that does not tolerate the Taint.
type Taint struct {
	// Required. The taint key to be applied to a node.
	Key string `json:"key" protobuf:"bytes,1,opt,name=key"`
	// The taint value corresponding to the taint key.
	// +optional
	Value string `json:"value,omitempty" protobuf:"bytes,2,opt,name=value"`
	// Required. The effect of the taint on pods
	// that do not tolerate the taint.
	// Valid effects are NoSchedule, PreferNoSchedule and NoExecute.
	Effect TaintEffect `json:"effect" protobuf:"bytes,3,opt,name=effect,casttype=TaintEffect"`
	// TimeAdded represents the time at which the taint was added.
	// It is only written for NoExecute taints.
	// +optional
	TimeAdded *slim_metav1.Time `json:"timeAdded,omitempty" protobuf:"bytes,4,opt,name=timeAdded"`
}

type TaintEffect string

const (
	// Do not allow new pods to schedule onto the node unless they tolerate the taint,
	// but allow all pods submitted to Kubelet without going through the scheduler
	// to start, and allow all already-running pods to continue running.
	// Enforced by the scheduler.
	TaintEffectNoSchedule TaintEffect = "NoSchedule"
	// Like TaintEffectNoSchedule, but the scheduler tries not to schedule
	// new pods onto the node, rather than prohibiting new pods from scheduling
	// onto the node entirely. Enforced by the scheduler.
	TaintEffectPreferNoSchedule TaintEffect = "PreferNoSchedule"
	// NOT YET IMPLEMENTED. TODO: Uncomment field once it is implemented.
	// Like TaintEffectNoSchedule, but additionally do not allow pods submitted to
	// Kubelet without going through the scheduler to start.
	// Enforced by Kubelet and the scheduler.
	// TaintEffectNoScheduleNoAdmit TaintEffect = "NoScheduleNoAdmit"

	// Evict any already-running pods that do not tolerate the taint.
	// Currently enforced by NodeController.
	TaintEffectNoExecute TaintEffect = "NoExecute"
)

// PodSpec is a description of a pod.
type PodSpec struct {
	// List of initialization containers belonging to the pod.
	// Init containers are executed in order prior to containers being started. If any
	// init container fails, the pod is considered to have failed and is handled according
	// to its restartPolicy. The name for an init container or normal container must be
	// unique among all containers.
	// Init containers may not have Lifecycle actions, Readiness probes, Liveness probes, or Startup probes.
	// The resourceRequirements of an init container are taken into account during scheduling
	// by finding the highest request/limit for each resource type, and then using the max of
	// of that value or the sum of the normal containers. Limits are applied to init containers
	// in a similar fashion.
	// Init containers cannot currently be added or removed.
	// Cannot be updated.
	// More info: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/
	// +patchMergeKey=name
	// +patchStrategy=merge
	InitContainers []Container `json:"initContainers,omitempty" patchStrategy:"merge" patchMergeKey:"name" protobuf:"bytes,20,rep,name=initContainers"`
	// List of containers belonging to the pod.
	// Containers cannot currently be added or removed.
	// There must be at least one container in a Pod.
	// Cannot be updated.
	// +patchMergeKey=name
	// +patchStrategy=merge
	Containers []Container `json:"containers" patchStrategy:"merge" patchMergeKey:"name" protobuf:"bytes,2,rep,name=containers"`
	// ServiceAccountName is the name of the ServiceAccount to use to run this pod.
	// More info: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/
	// +optional
	ServiceAccountName string `json:"serviceAccountName,omitempty" protobuf:"bytes,8,opt,name=serviceAccountName"`
	// NodeName is a request to schedule this pod onto a specific node. If it is non-empty,
	// the scheduler simply schedules this pod onto that node, assuming that it fits resource
	// requirements.
	// +optional
	NodeName string `json:"nodeName,omitempty" protobuf:"bytes,10,opt,name=nodeName"`
	// Host networking requested for this pod. Use the host's network namespace.
	// If this option is set, the ports that will be used must be specified.
	// Default to false.
	// +k8s:conversion-gen=false
	// +optional
	HostNetwork bool `json:"hostNetwork,omitempty" protobuf:"varint,11,opt,name=hostNetwork"`
}

// IP address information for entries in the (plural) PodIPs field.
// Each entry includes:
//    IP: An IP address allocated to the pod. Routable at least within the cluster.
type PodIP struct {
	// ip is an IP address (IPv4 or IPv6) assigned to the pod
	IP string `json:"ip,omitempty" protobuf:"bytes,1,opt,name=ip"`
}

// PodStatus represents information about the status of a pod. Status may trail the actual
// state of a system, especially if the node that hosts the pod cannot contact the control
// plane.
type PodStatus struct {
	// The phase of a Pod is a simple, high-level summary of where the Pod is in its lifecycle.
	// The conditions array, the reason and message fields, and the individual container status
	// arrays contain more detail about the pod's status.
	// There are five possible phase values:
	//
	// Pending: The pod has been accepted by the Kubernetes system, but one or more of the
	// container images has not been created. This includes time before being scheduled as
	// well as time spent downloading images over the network, which could take a while.
	// Running: The pod has been bound to a node, and all of the containers have been created.
	// At least one container is still running, or is in the process of starting or restarting.
	// Succeeded: All containers in the pod have terminated in success, and will not be restarted.
	// Failed: All containers in the pod have terminated, and at least one container has
	// terminated in failure. The container either exited with non-zero status or was terminated
	// by the system.
	// Unknown: For some reason the state of the pod could not be obtained, typically due to an
	// error in communicating with the host of the pod.
	//
	// More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#pod-phase
	// +optional
	Phase PodPhase `json:"phase,omitempty" protobuf:"bytes,1,opt,name=phase,casttype=PodPhase"`
	// Current service state of pod.
	// More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#pod-conditions
	// +optional
	// +patchMergeKey=type
	// +patchStrategy=merge
	Conditions []PodCondition `json:"conditions,omitempty" patchStrategy:"merge" patchMergeKey:"type" protobuf:"bytes,2,rep,name=conditions"`
	// IP address of the host to which the pod is assigned. Empty if not yet scheduled.
	// +optional
	HostIP string `json:"hostIP,omitempty" protobuf:"bytes,5,opt,name=hostIP"`
	// IP address allocated to the pod. Routable at least within the cluster.
	// Empty if not yet allocated.
	// +optional
	PodIP string `json:"podIP,omitempty" protobuf:"bytes,6,opt,name=podIP"`

	// podIPs holds the IP addresses allocated to the pod. If this field is specified, the 0th entry must
	// match the podIP field. Pods may be allocated at most 1 value for each of IPv4 and IPv6. This list
	// is empty if no IPs have been allocated yet.
	// +optional
	// +patchStrategy=merge
	// +patchMergeKey=ip
	PodIPs []PodIP `json:"podIPs,omitempty" protobuf:"bytes,12,rep,name=podIPs" patchStrategy:"merge" patchMergeKey:"ip"`

	// RFC 3339 date and time at which the object was acknowledged by the Kubelet.
	// This is before the Kubelet pulled the container image(s) for the pod.
	// +optional
	StartTime *slim_metav1.Time `json:"startTime,omitempty" protobuf:"bytes,7,opt,name=startTime"`
}

// +genclient
// +genclient:method=GetEphemeralContainers,verb=get,subresource=ephemeralcontainers,result=EphemeralContainers
// +genclient:method=UpdateEphemeralContainers,verb=update,subresource=ephemeralcontainers,input=EphemeralContainers,result=EphemeralContainers
// +k8s:deepcopy-gen:interfaces=k8s.io/apimachinery/pkg/runtime.Object

// Pod is a collection of containers that can run on a host. This resource is created
// by clients and scheduled onto hosts.
type Pod struct {
	slim_metav1.TypeMeta `json:",inline"`
	// Standard object's metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
	// +optional
	slim_metav1.ObjectMeta `json:"metadata,omitempty" protobuf:"bytes,1,opt,name=metadata"`

	// Specification of the desired behavior of the pod.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
	// +optional
	Spec PodSpec `json:"spec,omitempty" protobuf:"bytes,2,opt,name=spec"`

	// Most recently observed status of the pod.
	// This data may not be up to date.
	// Populated by the system.
	// Read-only.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
	// +optional
	Status PodStatus `json:"status,omitempty" protobuf:"bytes,3,opt,name=status"`
}

// +k8s:deepcopy-gen:interfaces=k8s.io/apimachinery/pkg/runtime.Object

// PodList is a list of Pods.
type PodList struct {
	slim_metav1.TypeMeta `json:",inline"`
	// Standard list metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
	// +optional
	slim_metav1.ListMeta `json:"metadata,omitempty" protobuf:"bytes,1,opt,name=metadata"`

	// List of pods.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md
	Items []Pod `json:"items" protobuf:"bytes,2,rep,name=items"`
}

// Session Affinity Type string
type ServiceAffinity string

const (
	// ServiceAffinityClientIP is the Client IP based.
	ServiceAffinityClientIP ServiceAffinity = "ClientIP"

	// ServiceAffinityNone - no session affinity.
	ServiceAffinityNone ServiceAffinity = "None"
)

const DefaultClientIPServiceAffinitySeconds int32 = 10800

// SessionAffinityConfig represents the configurations of session affinity.
type SessionAffinityConfig struct {
	// clientIP contains the configurations of Client IP based session affinity.
	// +optional
	ClientIP *ClientIPConfig `json:"clientIP,omitempty" protobuf:"bytes,1,opt,name=clientIP"`
}

// ClientIPConfig represents the configurations of Client IP based session affinity.
type ClientIPConfig struct {
	// timeoutSeconds specifies the seconds of ClientIP type session sticky time.
	// The value must be >0 && <=86400(for 1 day) if ServiceAffinity == "ClientIP".
	// Default value is 10800(for 3 hours).
	// +optional
	TimeoutSeconds *int32 `json:"timeoutSeconds,omitempty" protobuf:"varint,1,opt,name=timeoutSeconds"`
}

// Service Type string describes ingress methods for a service
type ServiceType string

const (
	// ServiceTypeClusterIP means a service will only be accessible inside the
	// cluster, via the cluster IP.
	ServiceTypeClusterIP ServiceType = "ClusterIP"

	// ServiceTypeNodePort means a service will be exposed on one port of
	// every node, in addition to 'ClusterIP' type.
	ServiceTypeNodePort ServiceType = "NodePort"

	// ServiceTypeLoadBalancer means a service will be exposed via an
	// external load balancer (if the cloud provider supports it), in addition
	// to 'NodePort' type.
	ServiceTypeLoadBalancer ServiceType = "LoadBalancer"

	// ServiceTypeExternalName means a service consists of only a reference to
	// an external name that kubedns or equivalent will return as a CNAME
	// record, with no exposing or proxying of any pods involved.
	ServiceTypeExternalName ServiceType = "ExternalName"
)

// Service External Traffic Policy Type string
type ServiceExternalTrafficPolicyType string

const (
	// ServiceExternalTrafficPolicyTypeLocal specifies node-local endpoints behavior.
	ServiceExternalTrafficPolicyTypeLocal ServiceExternalTrafficPolicyType = "Local"
	// ServiceExternalTrafficPolicyTypeCluster specifies node-global (legacy) behavior.
	ServiceExternalTrafficPolicyTypeCluster ServiceExternalTrafficPolicyType = "Cluster"
)

// ServiceStatus represents the current status of a service.
type ServiceStatus struct {
	// LoadBalancer contains the current status of the load-balancer,
	// if one is present.
	// +optional
	LoadBalancer LoadBalancerStatus `json:"loadBalancer,omitempty" protobuf:"bytes,1,opt,name=loadBalancer"`
}

// LoadBalancerStatus represents the status of a load-balancer.
type LoadBalancerStatus struct {
	// Ingress is a list containing ingress points for the load-balancer.
	// Traffic intended for the service should be sent to these ingress points.
	// +optional
	Ingress []LoadBalancerIngress `json:"ingress,omitempty" protobuf:"bytes,1,rep,name=ingress"`
}

// LoadBalancerIngress represents the status of a load-balancer ingress point:
// traffic intended for the service should be sent to an ingress point.
type LoadBalancerIngress struct {
	// IP is set for load-balancer ingress points that are IP based
	// (typically GCE or OpenStack load-balancers)
	// +optional
	IP string `json:"ip,omitempty" protobuf:"bytes,1,opt,name=ip"`
}

const (
	// MaxServiceTopologyKeys is the largest number of topology keys allowed on a service
	MaxServiceTopologyKeys = 16
)

// IPFamily represents the IP Family (IPv4 or IPv6). This type is used
// to express the family of an IP expressed by a type (e.g. service.spec.ipFamilies).
type IPFamily string

const (
	// IPv4Protocol indicates that this IP is IPv4 protocol
	IPv4Protocol IPFamily = "IPv4"
	// IPv6Protocol indicates that this IP is IPv6 protocol
	IPv6Protocol IPFamily = "IPv6"
)

// ServiceSpec describes the attributes that a user creates on a service.
type ServiceSpec struct {
	// The list of ports that are exposed by this service.
	// More info: https://kubernetes.io/docs/concepts/services-networking/service/#virtual-ips-and-service-proxies
	// +patchMergeKey=port
	// +patchStrategy=merge
	// +listType=map
	// +listMapKey=port
	// +listMapKey=protocol
	Ports []ServicePort `json:"ports,omitempty" patchStrategy:"merge" patchMergeKey:"port" protobuf:"bytes,1,rep,name=ports"`

	// Route service traffic to pods with label keys and values matching this
	// selector. If empty or not present, the service is assumed to have an
	// external process managing its endpoints, which Kubernetes will not
	// modify. Only applies to types ClusterIP, NodePort, and LoadBalancer.
	// Ignored if type is ExternalName.
	// More info: https://kubernetes.io/docs/concepts/services-networking/service/
	// +optional
	Selector map[string]string `json:"selector,omitempty" protobuf:"bytes,2,rep,name=selector"`

	// clusterIP is the IP address of the service and is usually assigned
	// randomly. If an address is specified manually, is in-range (as per
	// system configuration), and is not in use, it will be allocated to the
	// service; otherwise creation of the service will fail. This field may not
	// be changed through updates unless the type field is also being changed
	// to ExternalName (which requires this field to be blank) or the type
	// field is being changed from ExternalName (in which case this field may
	// optionally be specified, as describe above).  Valid values are "None",
	// empty string (""), or a valid IP address. Setting this to "None" makes a
	// "headless service" (no virtual IP), which is useful when direct endpoint
	// connections are preferred and proxying is not required.  Only applies to
	// types ClusterIP, NodePort, and LoadBalancer. If this field is specified
	// when creating a Service of type ExternalName, creation will fail. This
	// field will be wiped when updating a Service to type ExternalName.
	// More info: https://kubernetes.io/docs/concepts/services-networking/service/#virtual-ips-and-service-proxies
	// +optional
	ClusterIP string `json:"clusterIP,omitempty" protobuf:"bytes,3,opt,name=clusterIP"`

	// ClusterIPs is a list of IP addresses assigned to this service, and are
	// usually assigned randomly.  If an address is specified manually, is
	// in-range (as per system configuration), and is not in use, it will be
	// allocated to the service; otherwise creation of the service will fail.
	// This field may not be changed through updates unless the type field is
	// also being changed to ExternalName (which requires this field to be
	// empty) or the type field is being changed from ExternalName (in which
	// case this field may optionally be specified, as describe above).  Valid
	// values are "None", empty string (""), or a valid IP address.  Setting
	// this to "None" makes a "headless service" (no virtual IP), which is
	// useful when direct endpoint connections are preferred and proxying is
	// not required.  Only applies to types ClusterIP, NodePort, and
	// LoadBalancer. If this field is specified when creating a Service of type
	// ExternalName, creation will fail. This field will be wiped when updating
	// a Service to type ExternalName.  If this field is not specified, it will
	// be initialized from the clusterIP field.  If this field is specified,
	// clients must ensure that clusterIPs[0] and clusterIP have the same
	// value.
	//
	// Unless the "IPv6DualStack" feature gate is enabled, this field is
	// limited to one value, which must be the same as the clusterIP field.  If
	// the feature gate is enabled, this field may hold a maximum of two
	// entries (dual-stack IPs, in either order).  These IPs must correspond to
	// the values of the ipFamilies field. Both clusterIPs and ipFamilies are
	// governed by the ipFamilyPolicy field.
	// More info: https://kubernetes.io/docs/concepts/services-networking/service/#virtual-ips-and-service-proxies
	// +listType=atomic
	// +optional
	ClusterIPs []string `json:"clusterIPs,omitempty" protobuf:"bytes,18,opt,name=clusterIPs"`

	// type determines how the Service is exposed. Defaults to ClusterIP. Valid
	// options are ExternalName, ClusterIP, NodePort, and LoadBalancer.
	// "ClusterIP" allocates a cluster-internal IP address for load-balancing
	// to endpoints. Endpoints are determined by the selector or if that is not
	// specified, by manual construction of an Endpoints object or
	// EndpointSlice objects. If clusterIP is "None", no virtual IP is
	// allocated and the endpoints are published as a set of endpoints rather
	// than a virtual IP.
	// "NodePort" builds on ClusterIP and allocates a port on every node which
	// routes to the same endpoints as the clusterIP.
	// "LoadBalancer" builds on NodePort and creates an external load-balancer
	// (if supported in the current cloud) which routes to the same endpoints
	// as the clusterIP.
	// "ExternalName" aliases this service to the specified externalName.
	// Several other fields do not apply to ExternalName services.
	// More info: https://kubernetes.io/docs/concepts/services-networking/service/#publishing-services-service-types
	// +optional
	Type ServiceType `json:"type,omitempty" protobuf:"bytes,4,opt,name=type,casttype=ServiceType"`

	// externalIPs is a list of IP addresses for which nodes in the cluster
	// will also accept traffic for this service.  These IPs are not managed by
	// Kubernetes.  The user is responsible for ensuring that traffic arrives
	// at a node with this IP.  A common example is external load-balancers
	// that are not part of the Kubernetes system.
	// +optional
	ExternalIPs []string `json:"externalIPs,omitempty" protobuf:"bytes,5,rep,name=externalIPs"`

	// Supports "ClientIP" and "None". Used to maintain session affinity.
	// Enable client IP based session affinity.
	// Must be ClientIP or None.
	// Defaults to None.
	// More info: https://kubernetes.io/docs/concepts/services-networking/service/#virtual-ips-and-service-proxies
	// +optional
	SessionAffinity ServiceAffinity `json:"sessionAffinity,omitempty" protobuf:"bytes,7,opt,name=sessionAffinity,casttype=ServiceAffinity"`

	// Only applies to Service Type: LoadBalancer
	// LoadBalancer will get created with the IP specified in this field.
	// This feature depends on whether the underlying cloud-provider supports specifying
	// the loadBalancerIP when a load balancer is created.
	// This field will be ignored if the cloud-provider does not support the feature.
	// +optional
	LoadBalancerIP string `json:"loadBalancerIP,omitempty" protobuf:"bytes,8,opt,name=loadBalancerIP"`

	// If specified and supported by the platform, this will restrict traffic through the cloud-provider
	// load-balancer will be restricted to the specified client IPs. This field will be ignored if the
	// cloud-provider does not support the feature."
	// More info: https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/
	// +optional
	LoadBalancerSourceRanges []string `json:"loadBalancerSourceRanges,omitempty" protobuf:"bytes,9,opt,name=loadBalancerSourceRanges"`

	// externalTrafficPolicy denotes if this Service desires to route external
	// traffic to node-local or cluster-wide endpoints. "Local" preserves the
	// client source IP and avoids a second hop for LoadBalancer and Nodeport
	// type services, but risks potentially imbalanced traffic spreading.
	// "Cluster" obscures the client source IP and may cause a second hop to
	// another node, but should have good overall load-spreading.
	// +optional
	ExternalTrafficPolicy ServiceExternalTrafficPolicyType `json:"externalTrafficPolicy,omitempty" protobuf:"bytes,11,opt,name=externalTrafficPolicy"`

	// healthCheckNodePort specifies the healthcheck nodePort for the service.
	// This only applies when type is set to LoadBalancer and
	// externalTrafficPolicy is set to Local. If a value is specified, is
	// in-range, and is not in use, it will be used.  If not specified, a value
	// will be automatically allocated.  External systems (e.g. load-balancers)
	// can use this port to determine if a given node holds endpoints for this
	// service or not.  If this field is specified when creating a Service
	// which does not need it, creation will fail. This field will be wiped
	// when updating a Service to no longer need it (e.g. changing type).
	// +optional
	HealthCheckNodePort int32 `json:"healthCheckNodePort,omitempty" protobuf:"bytes,12,opt,name=healthCheckNodePort"`

	// sessionAffinityConfig contains the configurations of session affinity.
	// +optional
	SessionAffinityConfig *SessionAffinityConfig `json:"sessionAffinityConfig,omitempty" protobuf:"bytes,14,opt,name=sessionAffinityConfig"`

	// IPFamilies is a list of IP families (e.g. IPv4, IPv6) assigned to this
	// service, and is gated by the "IPv6DualStack" feature gate.  This field
	// is usually assigned automatically based on cluster configuration and the
	// ipFamilyPolicy field. If this field is specified manually, the requested
	// family is available in the cluster, and ipFamilyPolicy allows it, it
	// will be used; otherwise creation of the service will fail.  This field
	// is conditionally mutable: it allows for adding or removing a secondary
	// IP family, but it does not allow changing the primary IP family of the
	// Service.  Valid values are "IPv4" and "IPv6".  This field only applies
	// to Services of types ClusterIP, NodePort, and LoadBalancer, and does
	// apply to "headless" services.  This field will be wiped when updating a
	// Service to type ExternalName.
	//
	// This field may hold a maximum of two entries (dual-stack families, in
	// either order).  These families must correspond to the values of the
	// clusterIPs field, if specified. Both clusterIPs and ipFamilies are
	// governed by the ipFamilyPolicy field.
	// +listType=atomic
	// +optional
	IPFamilies []IPFamily `json:"ipFamilies,omitempty" protobuf:"bytes,19,opt,name=ipFamilies,casttype=IPFamily"`
}

// ServicePort contains information on service's port.
type ServicePort struct {
	// The name of this port within the service. This must be a DNS_LABEL.
	// All ports within a ServiceSpec must have unique names. When considering
	// the endpoints for a Service, this must match the 'name' field in the
	// EndpointPort.
	// Optional if only one ServicePort is defined on this service.
	// +optional
	Name string `json:"name,omitempty" protobuf:"bytes,1,opt,name=name"`

	// The IP protocol for this port. Supports "TCP", "UDP", and "SCTP".
	// Default is TCP.
	// +default="TCP"
	// +optional
	Protocol Protocol `json:"protocol,omitempty" protobuf:"bytes,2,opt,name=protocol,casttype=Protocol"`

	// The port that will be exposed by this service.
	Port int32 `json:"port" protobuf:"varint,3,opt,name=port"`

	// The port on each node on which this service is exposed when type is
	// NodePort or LoadBalancer.  Usually assigned by the system. If a value is
	// specified, in-range, and not in use it will be used, otherwise the
	// operation will fail.  If not specified, a port will be allocated if this
	// Service requires one.  If this field is specified when creating a
	// Service which does not need it, creation will fail. This field will be
	// wiped when updating a Service to no longer need it (e.g. changing type
	// from NodePort to ClusterIP).
	// More info: https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeport
	// +optional
	NodePort int32 `json:"nodePort,omitempty" protobuf:"varint,5,opt,name=nodePort"`
}

// +genclient
// +genclient:skipVerbs=deleteCollection
// +k8s:deepcopy-gen:interfaces=k8s.io/apimachinery/pkg/runtime.Object

// Service is a named abstraction of software service (for example, mysql) consisting of local port
// (for example 3306) that the proxy listens on, and the selector that determines which pods
// will answer requests sent through the proxy.
type Service struct {
	slim_metav1.TypeMeta `json:",inline"`
	// Standard object's metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
	// +optional
	slim_metav1.ObjectMeta `json:"metadata,omitempty" protobuf:"bytes,1,opt,name=metadata"`

	// Spec defines the behavior of a service.
	// https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
	// +optional
	Spec ServiceSpec `json:"spec,omitempty" protobuf:"bytes,2,opt,name=spec"`

	// Most recently observed status of the service.
	// Populated by the system.
	// Read-only.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
	// +optional
	Status ServiceStatus `json:"status,omitempty" protobuf:"bytes,3,opt,name=status"`
}

// +k8s:deepcopy-gen:interfaces=k8s.io/apimachinery/pkg/runtime.Object

// ServiceList holds a list of services.
type ServiceList struct {
	slim_metav1.TypeMeta `json:",inline"`
	// Standard list metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
	// +optional
	slim_metav1.ListMeta `json:"metadata,omitempty" protobuf:"bytes,1,opt,name=metadata"`

	// List of services
	Items []Service `json:"items" protobuf:"bytes,2,rep,name=items"`
}

// +genclient
// +k8s:deepcopy-gen:interfaces=k8s.io/apimachinery/pkg/runtime.Object

// Endpoints is a collection of endpoints that implement the actual service. Example:
//   Name: "mysvc",
//   Subsets: [
//     {
//       Addresses: [{"ip": "10.10.1.1"}, {"ip": "10.10.2.2"}],
//       Ports: [{"name": "a", "port": 8675}, {"name": "b", "port": 309}]
//     },
//     {
//       Addresses: [{"ip": "10.10.3.3"}],
//       Ports: [{"name": "a", "port": 93}, {"name": "b", "port": 76}]
//     },
//  ]
type Endpoints struct {
	slim_metav1.TypeMeta `json:",inline"`
	// Standard object's metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
	// +optional
	slim_metav1.ObjectMeta `json:"metadata,omitempty" protobuf:"bytes,1,opt,name=metadata"`

	// The set of all endpoints is the union of all subsets. Addresses are placed into
	// subsets according to the IPs they share. A single address with multiple ports,
	// some of which are ready and some of which are not (because they come from
	// different containers) will result in the address being displayed in different
	// subsets for the different ports. No address will appear in both Addresses and
	// NotReadyAddresses in the same subset.
	// Sets of addresses and ports that comprise a service.
	// +optional
	Subsets []EndpointSubset `json:"subsets,omitempty" protobuf:"bytes,2,rep,name=subsets"`
}

// EndpointSubset is a group of addresses with a common set of ports. The
// expanded set of endpoints is the Cartesian product of Addresses x Ports.
// For example, given:
//   {
//     Addresses: [{"ip": "10.10.1.1"}, {"ip": "10.10.2.2"}],
//     Ports:     [{"name": "a", "port": 8675}, {"name": "b", "port": 309}]
//   }
// The resulting set of endpoints can be viewed as:
//     a: [ 10.10.1.1:8675, 10.10.2.2:8675 ],
//     b: [ 10.10.1.1:309, 10.10.2.2:309 ]
type EndpointSubset struct {
	// IP addresses which offer the related ports that are marked as ready. These endpoints
	// should be considered safe for load balancers and clients to utilize.
	// +optional
	Addresses []EndpointAddress `json:"addresses,omitempty" protobuf:"bytes,1,rep,name=addresses"`
	// Port numbers available on the related IP addresses.
	// +optional
	Ports []EndpointPort `json:"ports,omitempty" protobuf:"bytes,3,rep,name=ports"`
}

// EndpointAddress is a tuple that describes single IP address.
type EndpointAddress struct {
	// The IP of this endpoint.
	// May not be loopback (127.0.0.0/8), link-local (169.254.0.0/16),
	// or link-local multicast ((224.0.0.0/24).
	// IPv6 is also accepted but not fully supported on all platforms. Also, certain
	// kubernetes components, like kube-proxy, are not IPv6 ready.
	// TODO: This should allow hostname or IP, See #4447.
	IP string `json:"ip" protobuf:"bytes,1,opt,name=ip"`
	// Optional: Node hosting this endpoint. This can be used to determine endpoints local to a node.
	// +optional
	NodeName *string `json:"nodeName,omitempty" protobuf:"bytes,4,opt,name=nodeName"`
}

// EndpointPort is a tuple that describes a single port.
type EndpointPort struct {
	// The name of this port.  This must match the 'name' field in the
	// corresponding ServicePort.
	// Must be a DNS_LABEL.
	// Optional only if one port is defined.
	// +optional
	Name string `json:"name,omitempty" protobuf:"bytes,1,opt,name=name"`

	// The port number of the endpoint.
	Port int32 `json:"port" protobuf:"varint,2,opt,name=port"`

	// The IP protocol for this port.
	// Must be UDP, TCP, or SCTP.
	// Default is TCP.
	// +optional
	Protocol Protocol `json:"protocol,omitempty" protobuf:"bytes,3,opt,name=protocol,casttype=Protocol"`
}

// +k8s:deepcopy-gen:interfaces=k8s.io/apimachinery/pkg/runtime.Object

// EndpointsList is a list of endpoints.
type EndpointsList struct {
	slim_metav1.TypeMeta `json:",inline"`
	// Standard list metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
	// +optional
	slim_metav1.ListMeta `json:"metadata,omitempty" protobuf:"bytes,1,opt,name=metadata"`

	// List of endpoints.
	Items []Endpoints `json:"items" protobuf:"bytes,2,rep,name=items"`
}

// NodeSpec describes the attributes that a node is created with.
type NodeSpec struct {
	// PodCIDR represents the pod IP range assigned to the node.
	// +optional
	PodCIDR string `json:"podCIDR,omitempty" protobuf:"bytes,1,opt,name=podCIDR"`

	// podCIDRs represents the IP ranges assigned to the node for usage by Pods on that node. If this
	// field is specified, the 0th entry must match the podCIDR field. It may contain at most 1 value for
	// each of IPv4 and IPv6.
	// +optional
	// +patchStrategy=merge
	PodCIDRs []string `json:"podCIDRs,omitempty" protobuf:"bytes,7,opt,name=podCIDRs" patchStrategy:"merge"`

	// If specified, the node's taints.
	// +optional
	Taints []Taint `json:"taints,omitempty" protobuf:"bytes,5,opt,name=taints"`
}

// NodeStatus is information about the current status of a node.
type NodeStatus struct {
	// Conditions is an array of current observed node conditions.
	// More info: https://kubernetes.io/docs/concepts/nodes/node/#condition
	// +optional
	// +patchMergeKey=type
	// +patchStrategy=merge
	Conditions []NodeCondition `json:"conditions,omitempty" patchStrategy:"merge" patchMergeKey:"type" protobuf:"bytes,4,rep,name=conditions"`
	// List of addresses reachable to the node.
	// Queried from cloud provider, if available.
	// More info: https://kubernetes.io/docs/concepts/nodes/node/#addresses
	// Note: This field is declared as mergeable, but the merge key is not sufficiently
	// unique, which can cause data corruption when it is merged. Callers should instead
	// use a full-replacement patch. See http://pr.k8s.io/79391 for an example.
	// +optional
	// +patchMergeKey=type
	// +patchStrategy=merge
	Addresses []NodeAddress `json:"addresses,omitempty" patchStrategy:"merge" patchMergeKey:"type" protobuf:"bytes,5,rep,name=addresses"`
}

// +enum
type NodePhase string

// These are the valid phases of node.
const (
	// NodePending means the node has been created/added by the system, but not configured.
	NodePending NodePhase = "Pending"
	// NodeRunning means the node has been configured and has Kubernetes components running.
	NodeRunning NodePhase = "Running"
	// NodeTerminated means the node has been removed from the cluster.
	NodeTerminated NodePhase = "Terminated"
)

// +enum
type NodeConditionType string

// These are valid conditions of node. Currently, we don't have enough information to decide
// node condition. In the future, we will add more. The proposed set of conditions are:
// NodeReachable, NodeLive, NodeReady, NodeSchedulable, NodeRunnable.
const (
	// NodeReady means kubelet is healthy and ready to accept pods.
	NodeReady NodeConditionType = "Ready"
	// NodeMemoryPressure means the kubelet is under pressure due to insufficient available memory.
	NodeMemoryPressure NodeConditionType = "MemoryPressure"
	// NodeDiskPressure means the kubelet is under pressure due to insufficient available disk.
	NodeDiskPressure NodeConditionType = "DiskPressure"
	// NodePIDPressure means the kubelet is under pressure due to insufficient available PID.
	NodePIDPressure NodeConditionType = "PIDPressure"
	// NodeNetworkUnavailable means that network for the node is not correctly configured.
	NodeNetworkUnavailable NodeConditionType = "NetworkUnavailable"
)

// NodeCondition contains condition information for a node.
type NodeCondition struct {
	// Type of node condition.
	Type NodeConditionType `json:"type" protobuf:"bytes,1,opt,name=type,casttype=NodeConditionType"`
	// Status of the condition, one of True, False, Unknown.
	Status ConditionStatus `json:"status" protobuf:"bytes,2,opt,name=status,casttype=ConditionStatus"`
	// (brief) reason for the condition's last transition.
	// +optional
	Reason string `json:"reason,omitempty" protobuf:"bytes,5,opt,name=reason"`
}

type NodeAddressType string

// These are valid address type of node.
const (
	NodeHostName    NodeAddressType = "Hostname"
	NodeExternalIP  NodeAddressType = "ExternalIP"
	NodeInternalIP  NodeAddressType = "InternalIP"
	NodeExternalDNS NodeAddressType = "ExternalDNS"
	NodeInternalDNS NodeAddressType = "InternalDNS"
)

// NodeAddress contains information for the node's address.
type NodeAddress struct {
	// Node address type, one of Hostname, ExternalIP or InternalIP.
	Type NodeAddressType `json:"type" protobuf:"bytes,1,opt,name=type,casttype=NodeAddressType"`
	// The node address.
	Address string `json:"address" protobuf:"bytes,2,opt,name=address"`
}

// +genclient
// +genclient:nonNamespaced
// +k8s:deepcopy-gen:interfaces=k8s.io/apimachinery/pkg/runtime.Object

// Node is a worker node in Kubernetes.
// Each node will have a unique identifier in the cache (i.e. in etcd).
type Node struct {
	slim_metav1.TypeMeta `json:",inline"`
	// Standard object's metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
	// +optional
	slim_metav1.ObjectMeta `json:"metadata,omitempty" protobuf:"bytes,1,opt,name=metadata"`

	// Spec defines the behavior of a node.
	// https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
	// +optional
	Spec NodeSpec `json:"spec,omitempty" protobuf:"bytes,2,opt,name=spec"`

	// Most recently observed status of the node.
	// Populated by the system.
	// Read-only.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
	// +optional
	Status NodeStatus `json:"status,omitempty" protobuf:"bytes,3,opt,name=status"`
}

// +k8s:deepcopy-gen:interfaces=k8s.io/apimachinery/pkg/runtime.Object

// NodeList is the whole list of all Nodes which have been registered with master.
type NodeList struct {
	slim_metav1.TypeMeta `json:",inline"`
	// Standard list metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
	// +optional
	slim_metav1.ListMeta `json:"metadata,omitempty" protobuf:"bytes,1,opt,name=metadata"`

	// List of nodes
	Items []Node `json:"items" protobuf:"bytes,2,rep,name=items"`
}

// +genclient
// +genclient:nonNamespaced
// +genclient:skipVerbs=deleteCollection
// +k8s:deepcopy-gen:interfaces=k8s.io/apimachinery/pkg/runtime.Object

// Namespace provides a scope for Names.
// Use of multiple namespaces is optional.
type Namespace struct {
	slim_metav1.TypeMeta `json:",inline"`
	// Standard object's metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
	// +optional
	slim_metav1.ObjectMeta `json:"metadata,omitempty" protobuf:"bytes,1,opt,name=metadata"`
}

// +k8s:deepcopy-gen:interfaces=k8s.io/apimachinery/pkg/runtime.Object

// NamespaceList is a list of Namespaces.
type NamespaceList struct {
	slim_metav1.TypeMeta `json:",inline"`
	// Standard list metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
	// +optional
	slim_metav1.ListMeta `json:"metadata,omitempty" protobuf:"bytes,1,opt,name=metadata"`

	// Items is the list of Namespace objects in the list.
	// More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/namespaces/
	Items []Namespace `json:"items" protobuf:"bytes,2,rep,name=items"`
}

// +k8s:deepcopy-gen:interfaces=k8s.io/apimachinery/pkg/runtime.Object

// A list of ephemeral containers used with the Pod ephemeralcontainers subresource.
type EphemeralContainers struct {
	slim_metav1.TypeMeta `json:",inline"`
	// +optional
	slim_metav1.ObjectMeta `json:"metadata,omitempty" protobuf:"bytes,1,opt,name=metadata"`
}