-
Notifications
You must be signed in to change notification settings - Fork 100
/
CISCO-LWAPP-QOS-MIB.my
5453 lines (4796 loc) · 197 KB
/
CISCO-LWAPP-QOS-MIB.my
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
-- *******************************************************************
-- CISCO-LWAPP-QOS-MIB.my
-- November 2011 Gayathri
--
-- Copyright (c) 2011-2013, 2018, 2021, 2023 by Cisco Systems, Inc.
-- All rights reserved.
-- *******************************************************************
CISCO-LWAPP-QOS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Unsigned32,
Counter32,
Gauge32,
IpAddress
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
TruthValue,
TEXTUAL-CONVENTION,
TimeStamp,
MacAddress,
DisplayString,
StorageType,
RowStatus
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
InetAddressType,
InetAddress
FROM INET-ADDRESS-MIB
TimeIntervalSec,
CiscoURLStringOrEmpty
FROM CISCO-TC
cldcClientMacAddress
FROM CISCO-LWAPP-DOT11-CLIENT-MIB
cLApSysMacAddress,
cLApDot11IfSlotId,
cLApName,
cLApDot11IfType,
cLApDot11IfEntry
FROM CISCO-LWAPP-AP-MIB
cLWlanIndex,
cLWlanConfigEntry
FROM CISCO-LWAPP-WLAN-MIB
Percent
FROM CISCO-QOS-PIB-MIB
ciscoMgmt
FROM CISCO-SMI;
-- ********************************************************************
-- * MODULE IDENTITY
-- ********************************************************************
ciscoLwappQosMIB MODULE-IDENTITY
LAST-UPDATED "201302270000Z"
ORGANIZATION "Cisco Systems Inc."
CONTACT-INFO
"Cisco Systems,
Customer Service
Postal: 170 West Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
Email: cs-wnbu-snmp@cisco.com"
DESCRIPTION
"This MIB is intended to be implemented on all those
devices operating as Central controllers, that
terminate the Light Weight Access Point Protocol
tunnel from Cisco Light-weight LWAPP Access Points.
Information provided by this MIB is used to study
the quality of service in the voice and video traffic
on the WLAN.
The relationship between CC and the LWAPP APs
can be depicted as follows:
+......+ +......+ +......+
+ + + + + +
+ CC + + CC + + CC +
+ + + + + +
+......+ +......+ +......+
.. . .
.. . .
. . . .
. . . .
. . . .
. . . .
+......+ +......+ +......+ +......+
+ + + + + + + +
+ AP + + AP + + AP + + AP +
+ + + + + + + +
+......+ +......+ +......+ +......+
. . .
. . . .
. . . .
. . . .
. . . .
+......+ +......+ +......+ +......+
+ + + + + + + +
+ MN + + MN + + MN + + MN +
+ + + + + + + +
+......+ +......+ +......+ +......+
The LWAPP tunnel exists between the controller and
the APs. The MNs communicate with the APs through
the protocol defined by the 802.11 standard.
LWAPP APs, upon bootup, discover and join one of the
controllers and the controller pushes the configuration,
that includes the WLAN parameters, to the LWAPP APs.
The APs then encapsulate all the 802.11 frames from
wireless clients inside LWAPP frames and forward
the LWAPP frames to the controller.
GLOSSARY
Access Point ( AP )
An entity that contains an 802.11 medium access
control ( MAC ) and physical layer ( PHY ) interface
and provides access to the distribution services via
the wireless medium for associated clients.
LWAPP APs encapsulate all the 802.11 frames in
LWAPP frames and sends them to the controller to which
it is logically connected.
Gratuitous Probe Response (GPR)
The Gratuitous Probe Response feature aids in conserving
battery power of WLAN-enabled cell phones by providing
a high rate packet on the order of tens of milliseconds
such that these kind of phones can wake up and wait at
predefined intervals, to reduce battery power. The
GPR packet is transmitted from the AP at a predefined
time interval.
Light Weight Access Point Protocol ( LWAPP )
This is a generic protocol that defines the
communication between the Access Points and the
Central Controller.
Mobile Node ( MN )
A roaming 802.11 wireless device in a wireless
network associated with an access point. Mobile Node
and client are used interchangeably.
TU
A measurement of time in units of 1024 microseconds.
User Priority ( UP )
Specifies a the priority rules in QOS for handling user
priority.
EDCA (Enhanced distributed channel access)
As defined in 802.11e standard, Enhanced distributed
channel access(EDCA) parameter set element is used
by the AP to establish policy, to change policy when
accepting new clients, or to adapt to changes in
offered load.
RRC (Resource Reservation Control)
Wireless LAN Controller will periodically send this message to
AP in order to collect various radio and client statistics, which
will be feed in to RRC algorithm. This message will be sent per access
class (i.e. 802.11 band) at the time of admission and re-RRC calculations.
REFERENCE
[1] Wireless LAN Medium Access Control ( MAC ) and
Physical Layer ( PHY ) Specifications
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
Weight Access Point Protocol"
REVISION "201803080000Z"
DESCRIPTION
"Added cLGlobalAirTimeAllocation."
REVISION "201302270000Z"
DESCRIPTION
"Added the following groups:
ciscoLwappQosMediaClientGroup,
ciscoLwappQosMediaStreamConfigGroup,
ciscoLwappPreferredCallConfigGroup,
ciscoLwappQosDot11aConfigGroupSup3,
ciscoLwappQosDot11bConfigGroupSup3,
ciscoLwappQosDot11MediaNotifGroup
Deprecated ciscoLwappQosMIBComplianceRev2 and
replaced it with ciscoLwappQosMIBComplianceRev3."
REVISION "201007210000Z"
DESCRIPTION
"Added the following groups:
ciscoLwappQosMIBComplianceRev2,
ciscoLwappQosDot11aConfigGroupSup2,
ciscoLwappQosDot11bConfigGroupSup2,
ciscoLwappQosDot11SipCacStatsGroup,
ciscoLwappQosDot11SipConfigGroup,
ciscoLwappQosDot11VoiceStatsGroup,
ciscoLwappQosDot11VoiceConfigGroup,
ciscoLwappQosConfigGroup,
ciscoLwappQosDot11VoiceNotifGroup
Deprecated ciscoLwappQosMIBComplianceRev1 and
replaced it with ciscoLwappQosMIBComplianceRev2."
REVISION "200701070000Z"
DESCRIPTION
"Added ciscoLwappQosDot11aConfigGroupSup1 and
ciscoLwappQosDot11bConfigGroupSup1 objects."
REVISION "200604130000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 524 }
ciscoLwappQosMIBNotifs OBJECT IDENTIFIER
::= { ciscoLwappQosMIB 0 }
ciscoLwappQosMIBObjects OBJECT IDENTIFIER
::= { ciscoLwappQosMIB 1 }
ciscoLwappQosMIBConform OBJECT IDENTIFIER
::= { ciscoLwappQosMIB 2 }
cLQd11aCACConfig OBJECT IDENTIFIER
::= { ciscoLwappQosMIBObjects 1 }
cLQd11bCACConfig OBJECT IDENTIFIER
::= { ciscoLwappQosMIBObjects 2 }
cLQd11GprConfig OBJECT IDENTIFIER
::= { ciscoLwappQosMIBObjects 3 }
cLQd11CACStats OBJECT IDENTIFIER
::= { ciscoLwappQosMIBObjects 4 }
cLQEntConfConfig OBJECT IDENTIFIER
::= { ciscoLwappQosMIBObjects 5 }
cLQd11VoiceStats OBJECT IDENTIFIER
::= { ciscoLwappQosMIBObjects 6 }
cLQVoiceWlanConfig OBJECT IDENTIFIER
::= { ciscoLwappQosMIBObjects 7 }
cLQVoiceClient OBJECT IDENTIFIER
::= { ciscoLwappQosMIBObjects 8 }
cLQMediaClient OBJECT IDENTIFIER
::= { ciscoLwappQosMIBObjects 9 }
cLQd11SipCacConfig OBJECT IDENTIFIER
::= { ciscoLwappQosMIBObjects 10 }
cLQMediaStreamConfig OBJECT IDENTIFIER
::= { ciscoLwappQosMIBObjects 11 }
cLQPreferredCallConfig OBJECT IDENTIFIER
::= { ciscoLwappQosMIBObjects 12 }
cLQConfigObjects OBJECT IDENTIFIER
::= { ciscoLwappQosMIBObjects 13 }
cLQoSProfileConfig OBJECT IDENTIFIER
::= { ciscoLwappQosMIBObjects 14 }
cLQoSSipSnoopingConfig OBJECT IDENTIFIER
::= { ciscoLwappQosMIBObjects 15 }
cLQoSAirTimeFairness OBJECT IDENTIFIER
::= { ciscoLwappQosMIBObjects 16 }
cLQd11axCACConfig OBJECT IDENTIFIER
::= { ciscoLwappQosMIBObjects 21 }
cLQCacThreshold OBJECT IDENTIFIER
::= { ciscoLwappQosMIBObjects 22 }
cLQCacStats OBJECT IDENTIFIER
::= { ciscoLwappQosMIBObjects 23 }
CiscoLwappDot11aPhyRates ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This texual convention denotes the physical rates supported by
a 802.11a radio. The rates are indicated in Mbps."
SYNTAX INTEGER {
six(6), -- 6 Mbps
nine(9), -- 9 Mbps
twelve(12), -- 12 Mbps
eighteen(18), -- 18 Mbps
twentyFour(24), -- 24 Mbps
thirtySix(36), -- 36 Mbps
fortyEight(48), -- 48 Mbps
fiftyFour(54), -- 54 Mbps
sixtyFive(65), -- 65 Mbps
seventyTwoPointTwo(72), -- 72 Mbps
oneThirty(130), -- 130 Mbps
oneThirtyfive(135), -- 135 Mbps
oneFortyFourPointFour(144), -- 144 Mbps
oneFifty(150), -- 150 Mbps
twoSeventy(270), -- 270 Mbps
threeHundred(300) -- 300 Mbps
}
CiscoLwappDot11bPhyRates ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This texual convention denotes the physical rates supported by
a 802.11b radio. The rates are indicated in Mbps."
SYNTAX INTEGER {
one(1), -- 1 Mbps
two(2), -- 2 Mbps
fivePointFive(5), -- 5.5 Mbps
six(6), -- 6 Mbps
nine(9), -- 9 Mbps
eleven(11), -- 11 Mbps
twelve(12), -- 12 Mbps
eighteen(18), -- 18 Mbps
twentyFour(24), -- 24 Mbps
thirtySix(36), -- 36 Mbps
fortyEight(48), -- 48 Mbps
fiftyFour(54), -- 54 Mbps
sixtyFive(65), -- 65 Mbps
seventyTwoPointTwo(72), -- 72 Mbps
oneThirty(130), -- 130 Mbps
oneThirtyFive(135), -- 135 Mbps
oneFortyFourPointFour(144), -- 144.4 Mbps
oneFifty(150), -- 150 Mbps
twoSeventy(270), -- 270 Mbps
threeHundred(300) -- 300 Mbps
}
-- ********************************************************************
-- * Configuration for Call Admission Control parameters
-- * for VOICE traffic in 802.11ax interfaces in the controller
-- ********************************************************************
cLQd11axVoiceAdmCtrlSupport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable or disable admission
control for voice traffic flowing through the 802.11ax
interfaces in the controller.
When set to 'true', controller will reserve and manage
max-bandwidth (cLQd11axVoiceMaxAdmBandwidth)
and roaming-bandwidth
(cLQd11axVoiceMaxRoamBandwidth) as per user
configured values.
When disabled, admission control will not be enforced.
This may delay voice traffic depending on load on
the WLAN."
DEFVAL { true }
::= { cLQd11axCACConfig 1 }
cLQd11axVoiceMaxAdmBandwidth OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "Percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object denotes the maximum bandwidth
that can be allocated by controller for voice
traffic when admission control is enabled for
for 802.11ax interfaces in the controller.
Please note that the write operation on this
object will be successful only if the 802.11ax
network is not operational and the total
value populated for this object for all the
admission control attributes (voice, video)
together does not exceed 100%."
::= { cLQd11axCACConfig 2 }
cLQd11axVoiceMaxRoamBandwidth OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "Percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the bandwidth relative
to the maximum allocated bandwidth indicated by
cLQd11axVoiceMaxAdmBandwidth, that can be
allocated to roaming clients for voice traffic,
when admission control is enabled for 802.11ax
interfaces in the controller.
Please note that the write operation on this
object will be successful only if the 802.11ax
network is disabled and not operational. The
value configured through this object takes
effect when the 802.11ax network is enabled."
DEFVAL { 0 }
::= { cLQd11axCACConfig 3 }
-- ********************************************************************
-- * Configuration for Call Admission Control parameters
-- * for VIDEO traffic in 802.11ax interfaces in the controller
-- ********************************************************************
cLQd11axVideoAdmCtrlSupport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable or disable admission
control for video traffic flowing through the 802.11ax
interfaces in the controller.
When set to 'true', controller will reserve and manage
max-bandwidth (cLQd11axVideoMaxAdmBandwidth)
and roaming-bandwidth
(cLQd11axVideoMaxRoamBandwidth) as per user
configured values.
When disabled, admission control will not be enforced.
This may delay video traffic depending on load on
the WLAN."
DEFVAL { true }
::= { cLQd11axCACConfig 4 }
cLQd11axVideoMaxAdmBandwidth OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "Percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object denotes the maximum bandwidth
that can be allocated by controller for video traffic
when admission control is enabled for 802.11ax
interfaces in the controller. When set to 0, all
available bandwidth in 802.11ax interfaces can be
allocated to video traffic.
Please note that the write operation on this
object will be successful only if the 802.11ax
network is not operational and the total
value populated for this object for all the
admission control attributes (voice, video)
together does not exceed 100%."
DEFVAL { 0 }
::= { cLQd11axCACConfig 5 }
cLQd11axVideoMaxRoamBandwidth OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "Percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the bandwidth relative
to the maximum allocated bandwidth indicated by
cLQd11aVideoMaxAdmBandwidth, that can be
allocated to roaming clients for video traffic,
when admission control is enabled for 802.11ax
interfaces in the controller.
Please note that the write operation on this
object will be successful only if the 802.11ax
network is disabled and not operational. The
value configured through this object takes effect
when the 802.11ax network is enabled and
operational."
DEFVAL { 0 }
::= { cLQd11axCACConfig 6 }
cLQd11axEdcaProfile OBJECT-TYPE
SYNTAX INTEGER {
wmmDefault(1),
svpVoice(2),
optimizedVoice(3),
optimizedVideoVoice(4),
customVoice(5),
fastlaneEdca(6),
iotLowLatency(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the EDCA profile to be used
in EDCA Parameter set element.
wmmDefault - WMM default standard parameters.
svpVoice - Spectralink voice priority
parameters.
optimizedVoice - parameters for voice optimization.
optimizedVideoVoice - parameters for video and voice
optimization.
customVoice - parameters for voice custom.
fastlaneEdca - parameter for fastlane.
iotLowLatency - parameters for low latency.
"
::= { cLQd11axCACConfig 7 }
cLQd11axVoiceCtrl OBJECT-TYPE
SYNTAX INTEGER {
loadBased(1),
static(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the parameters that
can be modified, when admission control is enabled.
loadBased - controller will reserve and manage
max-bandwidth and roaming-bandwidth
based on the load on the WLAN.
static - controller will reserve and
manage max-bandwidth
(cLQd11axVoiceMaxAdmBandwidth)
and roaming-bandwidth
(cLQd11axVoiceMaxRoamBandwidth)
as per user configured values.
When ACM is disabled, admission control will not
be enforced. This may delay voice traffic depending
on the traffic on the WLAN."
DEFVAL { loadBased }
::= { cLQd11axCACConfig 8 }
cLQd11axExpeditedBw OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies if expedited BW feature is
enabled or not.
A value of 'true' will ensure that the APs advertise
the expedited BW support in their beacons and
association responses.
A value of 'false' will ensure that the APs do not
advertise the expedited BW support in their beacons
and association responses."
::= { cLQd11axCACConfig 9 }
-- ********************************************************************
-- * Configuration of SIP CAC support on dot11ax radio band.
-- ********************************************************************
cLQd11axSipCacSupportEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether SIP CAC is enabled.
A value of 'true' enables SIP CAC on dot11a radio band.
A value of 'false' disables SIP CAC on dot11a radio band."
::= { cLQd11axCACConfig 10 }
-- ********************************************************************
-- * Configuration for Call Admission Control parameters
-- * for mc2uc in 802.11ax interfaces in the controller
-- ********************************************************************
cLQd11axMcastDirectEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the decision flag to allow multicast direct
stream on radio."
::= { cLQd11axCACConfig 11 }
cLQd11axBestEffortAdmission OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether to admit a media stream in best
effort queue."
::= { cLQd11axCACConfig 12 }
cLQd11axRedirectBestEffort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether a unicast or multicast only video
stream can be redirected to best effort."
::= { cLQd11axCACConfig 13 }
cLQd11axRadioMaxStreams OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the maximum number of allowed streams per
radio for a 802.11ax band."
::= { cLQd11axCACConfig 14 }
cLQd11axMaxMediaATPercent OBJECT-TYPE
SYNTAX INTEGER (0..100)
UNITS "Percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the maximum allowed bandwidth for media
traffic."
::= { cLQd11axCACConfig 15 }
cLQd11axMinPhyRate OBJECT-TYPE
SYNTAX CiscoLwappDot11aPhyRates
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the minimum physical rate that should be
enabled by a client to successfully join a media stream."
::= { cLQd11axCACConfig 16 }
cLQd11axClientMaxStreams OBJECT-TYPE
SYNTAX Unsigned32 (0..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the maximum number of allowed streams per
client for a 802.11ax band."
::= { cLQd11axCACConfig 17 }
-- ********************************************************************
-- * Configuration for Call Admission Control parameters
-- * for VOICE traffic in 802.11a interfaces in the controller
-- ********************************************************************
cLQd11aVoiceAdmCtrlSupport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable or disable admission
control for voice traffic flowing through the 802.11a
interfaces in the controller.
When set to 'true', controller will reserve and manage
max-bandwidth (cLQd11aVoiceMaxAdmBandwidth)
and roaming-bandwidth
(cLQd11aVoiceMaxRoamBandwidth) as per user
configured values.
When disabled, admission control will not be enforced.
This may delay voice traffic depending on load on
the WLAN."
DEFVAL { true }
::= { cLQd11aCACConfig 1 }
cLQd11aVoiceMaxAdmBandwidth OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "Percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object denotes the maximum bandwidth
that can be allocated by controller for voice
traffic when admission control is enabled for
for 802.11a interfaces in the controller.
Please note that the write operation on this
object will be successful only if the 802.11a
network is not operational and the total
value populated for this object for all the
admission control attributes (voice, video)
together does not exceed 100%."
::= { cLQd11aCACConfig 2 }
cLQd11aVoiceMaxRoamBandwidth OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "Percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the bandwidth relative
to the maximum allocated bandwidth indicated by
cLQd11aVoiceMaxAdmBandwidth, that can be
allocated to roaming clients for voice traffic,
when admission control is enabled for 802.11a
interfaces in the controller.
Please note that the write operation on this
object will be successful only if the 802.11a
network is disabled and not operational. The
value configured through this object takes
effect when the 802.11a network is enabled."
DEFVAL { 0 }
::= { cLQd11aCACConfig 3 }
-- ********************************************************************
-- * Configuration for Call Admission Control parameters
-- * for VIDEO traffic in 802.11a interfaces in the controller
-- ********************************************************************
cLQd11aVideoAdmCtrlSupport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable or disable admission
control for video traffic flowing through the 802.11a
interfaces in the controller.
When set to 'true', controller will reserve and manage
max-bandwidth (cLQd11aVideoMaxAdmBandwidth)
and roaming-bandwidth
(cLQd11aVideoMaxRoamBandwidth) as per user
configured values.
When disabled, admission control will not be enforced.
This may delay video traffic depending on load on
the WLAN."
DEFVAL { true }
::= { cLQd11aCACConfig 4 }
cLQd11aVideoMaxAdmBandwidth OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "Percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object denotes the maximum bandwidth
that can be allocated by controller for video traffic
when admission control is enabled for 802.11a
interfaces in the controller. When set to 0, all
available bandwidth in 802.11a interfaces can be
allocated to video traffic.
Please note that the write operation on this
object will be successful only if the 802.11a
network is not operational and the total
value populated for this object for all the
admission control attributes (voice, video)
together does not exceed 100%."
DEFVAL { 0 }
::= { cLQd11aCACConfig 5 }
cLQd11aVideoMaxRoamBandwidth OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "Percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the bandwidth relative
to the maximum allocated bandwidth indicated by
cLQd11aVideoMaxAdmBandwidth, that can be
allocated to roaming clients for video traffic,
when admission control is enabled for 802.11a
interfaces in the controller.
Please note that the write operation on this
object will be successful only if the 802.11a
network is disabled and not operational. The
value configured through this object takes effect
when the 802.11a network is enabled and
operational."
DEFVAL { 0 }
::= { cLQd11aCACConfig 6 }
-- ********************************************************************
-- * Configuration of GPR (Gratuitous Probe Response) probe interval
-- * for all 802.11a interfaces in the controller
-- ********************************************************************
cLQd11aGprProbeInterval OBJECT-TYPE
SYNTAX Unsigned32 (10..100)
UNITS "TU"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the GPR probe interval
period to be used by all 802.11a interfaces in the
controller. The radios are advertising any
WLAN with GPR support enabled.
Please note that the write operation on this
object will be successful only if the 802.11a
network is not operational. The value configured
through this object takes effect when the 802.11a
network is enabled and operational."
DEFVAL { 10 }
::= { cLQd11aCACConfig 7 }
cLQd11aVoiceCtrl OBJECT-TYPE
SYNTAX INTEGER {
loadBased(1),
static(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the parameters that
can be modified, when admission control is enabled.
loadBased - controller will reserve and manage
max-bandwidth and roaming-bandwidth
based on the load on the WLAN.
static - controller will reserve and
manage max-bandwidth
(cLQd11aVoiceMaxAdmBandwidth)
and roaming-bandwidth
(cLQd11aVoiceMaxRoamBandwidth)
as per user configured values.
When ACM is disabled, admission control will not
be enforced. This may delay voice traffic depending
on the traffic on the WLAN."
DEFVAL { loadBased }
::= { cLQd11aCACConfig 8 }
cLQd11aExpeditedBw OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies if expedited BW feature is
enabled or not.
A value of 'true' will ensure that the APs advertise
the expedited BW support in their beacons and
association responses.
A value of 'false' will ensure that the APs do not
advertise the expedited BW support in their beacons
and association responses."
::= { cLQd11aCACConfig 9 }
cLQd11aEdcaProfile OBJECT-TYPE
SYNTAX INTEGER {
wmmDefault(1),
svpVoice(2),
optimizedVoice(3),
optimizedVideoVoice(4),
customVoice(5),
fastlaneEdca(6),
iotLowLatency(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the EDCA profile to be used
in EDCA Parameter set element.
wmmDefault - WMM default standard parameters.
svpVoice - Spectralink voice priority
parameters.
optimizedVoice - parameters for voice optimization.
optimizedVideoVoice - parameters for video and voice
optimization.
customVoice - parameters for voice custom.
fastlaneEdca - parameter for fastlane.
iotLowLatency - parameters for low latency."
::= { cLQd11aCACConfig 10 }
cLQd11aMacOptimization OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies MAC enhancements for voice,
resulting in improvement in number of voice calls
serviced per access point.
A value of 'true' enables MAC optimization.
A value of 'false' disables MAC optimization."
::= { cLQd11aCACConfig 11 }
cLQd11aMaxCallLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object specifies the maximum number of CAC Voice Calls
allowed on dot11a radio band.
Value of zero denotes no limit. No replacement object."
::= { cLQd11aCACConfig 12 }
-- ********************************************************************
-- * Configuration for Call Admission Control parameters
-- * for mc2uc in 802.11a interfaces in the controller
-- ********************************************************************
cLQd11aMcastDirectEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the decision flag to allow multicast direct
stream on radio."
::= { cLQd11aCACConfig 13 }
cLQd11aBestEffortAdmission OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether to admit a media stream in best
effort queue."
::= { cLQd11aCACConfig 14 }
cLQd11aRedirectBestEffort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether a unicast or multicast only video
stream can be redirected to best effort."
::= { cLQd11aCACConfig 15 }
cLQd11aRadioMaxStreams OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the maximum number of allowed streams per
radio for a 802.11a band."
::= { cLQd11aCACConfig 16 }
cLQd11aMaxVideoATPercent OBJECT-TYPE
SYNTAX INTEGER (0..85)
UNITS "Percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the maximum allowed bandwidth for video
traffic."
::= { cLQd11aCACConfig 17 }
cLQd11aMaxVoiceATPercent OBJECT-TYPE
SYNTAX INTEGER (0..85)
UNITS "Percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the maximum allowed bandwidth for voice
traffic."
::= { cLQd11aCACConfig 18 }
cLQd11aMaxMediaATPercent OBJECT-TYPE
SYNTAX INTEGER (0..100)
UNITS "Percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the maximum allowed bandwidth for media
traffic."
::= { cLQd11aCACConfig 19 }
cLQd11aMinPhyRate OBJECT-TYPE
SYNTAX CiscoLwappDot11aPhyRates
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the minimum physical rate that should be
enabled by a client to successfully join a media stream."
::= { cLQd11aCACConfig 20 }
cLQd11aClientMaxStreams OBJECT-TYPE
SYNTAX Unsigned32 (0..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the maximum number of allowed streams per
client for a 802.11a band."
::= { cLQd11aCACConfig 21 }
-- ********************************************************************
-- * Configuration of SIP CAC support on dot11a radio band.
-- ********************************************************************
cLQd11aSipCacSupportEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether SIP CAC is enabled.
A value of 'true' enables SIP CAC on dot11a radio band.
A value of 'true' disables SIP CAC on dot11a radio band."
::= { cLQd11aCACConfig 22 }
-- ********************************************************************
-- * Configuration for Call Admission Control parameters
-- * for VOICE traffic in 802.11b/g interfaces in the controller
-- ********************************************************************
cLQd11bVoiceAdmCtrlSupport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable or disable admission
control for voice traffic flowing through the
802.11b/g interfaces in the controller.