README

lrzip README

Long Range ZIP or Lzma RZIP

This is a compression program optimised for large files. The larger the file
and the more memory you have, the better the compression advantage this will
provide, especially once the files are larger than 100MB. The advantage can
be chosen to be either size (much smaller than bzip2) or speed (much faster
than bzip2).


Quick lowdown of the most used options:

 lrztar directory
This will produce an archive directory.tar.lrz compressed with lzma.

 lrzuntar directory.tar.lrz
This will completely extract an archived directory.

 lrzip filename
This will produce an archive filename.lrz compressed with lzma (best all
round) giving slow compression and fast decompression

 lrzip -z filename
This will produce an archive filename.lrz compressed with ZPAQ giving extreme
compression but which takes ages to compress and decompress

 lrzip -l filename
This will produce an archive filename.lrz compressed with LZO giving very
fast compression and fast decompression

 lrunzip filename.lrz
This will decompress filename.lrz into filename


Lrzip uses an extended version of rzip which does a first pass long distance
redundancy reduction. The lrzip modifications make it scale according to
memory size.
The data is then either:
1. Compressed by lzma (default) which gives excellent compression
at approximately twice the speed of bzip2 compression
2. Compressed by a number of other compressors chosen for different reasons,
in order of likelihood of usefulness:
2a. ZPAQ: Extreme compression up to 20% smaller than lzma but ultra slow
at compression AND decompression.
2b. LZO: Extremely fast compression and decompression which on most machines
compresses faster than disk writing making it as fast (or even faster) than
simply copying a large file
2c. GZIP: Almost as fast as LZO but with better compression.
2d. BZIP2: A defacto linux standard of sorts but is the middle ground between
lzma and gzip and neither here nor there.
3. Leaving it uncompressed and rzip prepared. This form improves substantially
any compression performed on the resulting file in both size and speed (due to
the nature of rzip preparation merging similar compressible blocks of data and
creating a smaller file). By "improving" I mean it will either speed up the
very slow compressors with minor detriment to compression, or greatly increase
the compression of simple compression algorithms.

The major disadvantages are:
1. The main lrzip application only works on single files so it requires the
lrztar wrapper to fake a complete archiver.
2. It requires a lot of memory to get the best performance out of, and is not
really usable (for compression) with less than 256MB. Decompression requires
less ram and works on smaller ram machines. Sometimes swap may need to be
enabled on these lower ram machines for the operating system to be happy.
3. STDIN/STDOUT works fine on both compression and decompression, but larger
files compressed in this manner will end up being less efficiently compressed.

The unique feature of lrzip is that it tries to make the most of the available
ram in your system at all times for maximum benefit. It does this by default,
choosing the largest sized window possible without running out of memory. It
also has a unique "sliding mmap" feature which makes it possible to even use
a compression window larger than your ramsize, if the file is that large. It
does this (with the -U option) by implementing one large mmap buffer as per
normal, and a smaller moving buffer to track which part of the file is
currently being examined, emulating a much larger single mmapped buffer.
Unfortunately this mode can be many times slower.

See the file README.benchmarks in doc/ for performance examples and what kind
of data lrzip is very good with.


Requires:
pthreads
liblzo2-dev
libbz2-dev
libz-dev
libm
tar
(nasm on 32bit x86)

To build/install:
./configure
make
make install

To build from the git repository do:
./autogen.sh
before the above steps.


FAQS.
Q. What encryption does lrzip use?
A. Lrzip uses the best current proven technologies to achieve high grade
password protected encryption. It uses a combination of sha512 to multiply
hash the password with random salt and aes128 to do block encryption of each
block of data with more random salt. The amount of initial hashing of the
password increases by the date an lrzip archive is encrypted according to
Moore's law, making it harder each year to brute force attack the password
to keep up with the increasing computing power each year. It is virtually
guaranteed that the same file encrypted with the same password will never
be the same twice. The weakest link in this encryption mode by far is the
password chosen by the user. There is currently no known attack or backdoor
for this encryption mechanism, and there is absolutely no way of retrieving
your password should you forget it.

Q. How do I make a static build?
A. ./configure --enable-static-bin

Q. I want the absolute maximum compression I can possibly get, what do I do?
A. Try the command line options "-Uzp 1 -L 9". This uses all available ram and
ZPAQ compression, and even uses a compression window larger than you have ram.
The -p 1 option disables multithreading which improves compression but at the
expense of speed. Expect it to take many times longer.

Q. I want the absolute fastest decent compression I can possibly get.
A. Try the command line option -l. This will use the  lzo backend compression,
and level 7 compression (1 isn't much faster).

Q. How much slower is the unlimited mode?
A. It depends on 2 things. First, just how much larger than your ram the file
is, as the bigger the difference, the slower it will be. The second is how much
redundant data there is. The more there is, the slower, but ultimately the
better the compression. Why isn't it on by default? If the compression window is
a LOT larger than ram, with a lot of redundant information it can be drastically
slower. I may revisit this possibility in the future if I can make it any
faster.

Q. Can I use your tool for even more compression than lzma offers?
A. Yes, the rzip preparation of files makes them more compressible by most
other compression technique I have tried. Using the -n option will generate
a .lrz file smaller than the original which should be more compressible, and
since it is smaller it will compress faster than it otherwise would have.

Q. 32bit?
A. 32bit machines have a limit of 2GB sized compression windows due to
userspace limitations on mmap and malloc, so even if you have much more ram
you will not be able to use compression windows larger than 2GB. Also you
may be unable to decompress files compressed on 64bit machines which have
used windows larger than 2GB.

Q. How about 64bit?
A. 64bit machines with their ability to address massive amounts of ram will
excel with lrzip due to being able to use compression windows limited only in
size by the amount of physical ram.

Q. Other operating systems?
A. The code is POSIXy with GNU extensions. Patches are welcome. Version 0.43+
should build on MacOSX 10.5+

Q. Does it work on stdin/stdout?
A. Yes it does. Compression and decompression work well to/from STDIN/STDOUT.
However because lrzip does multiple passes on the data, it has to store a
large amount in ram before it dumps it to STDOUT (and vice versa), thus it
is unable to work with the massive compression windows regular operation
provides. Thus the compression afforded on files larger than approximately
25% RAM size will be less efficient (though still benefiting compared to
traditional compression formats).

Q. I have another compression format that is even better than zpaq, can you
use that?
A. You can use it yourself on rzip prepared files (see above). Alternatively
if the source code is compatible with the GPL license it can be added to the
lrzip source code. Libraries with functions similar to compress() and
decompress() functions of zlib would make the process most painless. Please
tell me if you have such a library so I can include it :)

Q. What's this "Starting lzma back end compression thread..." message?
A. While I'm a big fan of progress percentage being visible, unfortunately
lzma compression can't currently be tracked when handing over 100+MB chunks
over to the lzma library. Therefore you'll see progress percentage until
each chunk is handed over to the lzma library.

Q. What's this "lzo testing for incompressible data" message?
A. Other compression is much slower, and lzo is the fastest. To help speed up
the process, lzo compression is performed on the data first to test that the
data is at all compressible. If a small block of data is not compressible, it
tests progressively larger blocks until it has tested all the data (if it fails
to compress at all). If no compressible data is found, then the subsequent
compression is not even attempted. This can save a lot of time during the
compression phase when there is incompressible data. Theoretically it may be
possible that data is compressible by the other backend (zpaq, lzma etc) and not
at all by lzo, but in practice such data achieves only minuscule amounts of
compression which are not worth pursuing. Most of the time it is clear one way
or the other that data is compressible or not. If you wish to disable this
test and force it to try compressing it anyway, use -T.

Q. I have truckloads of ram so I can compress files much better, but can my
generated file be decompressed on machines with less ram?
A. Yes. Ram requirements for decompression go up only by the -L compression
option with lzma and are never anywhere near as large as the compression
requirements. However if you're on 64bit and you use a compression window
greater than 2GB, it might not be possible to decompress it on 32bit machines.

Q. Why are you including bzip2 compression?
A. To maintain a similar compression format to the original rzip (although the
other modes are more useful).

Q. What about multimedia?
A. Most multimedia is already in a heavily compressed "lossy" format which by
its very nature has very little redundancy. This means that there is not
much that can actually be compressed. If your video/audio/picture is in a
high bitrate, there will be more redundancy than a low bitrate one making it
more suitable to compression. None of the compression techniques in lrzip are
optimised for this sort of data. However, the nature of rzip preparation
means that you'll still get better compression than most normal compression
algorithms give you if you have very large files. ISO images of dvds for
example are best compressed directly instead of individual .VOB files. ZPAQ is
the only compression format that can do any significant compression of
multimedia.

Q. Is this multithreaded?
A. As of version 0.540, it is HEAVILY multithreaded with the back end
compression and decompression phase, and will continue to process the rzip
pre-processing phase so when using one of the more CPU intensive backend
compressions like lzma or zpaq, SMP machines will show massive speed
improvements. Lrzip will detect the number of CPUs to use, but it can be
overridden with the -p option if the slightly better compression is desired
more than speed. -p 1 will give the best compression but also be the slowest.

Q. This uses heaps of memory, can I make it use less?
A. Well you can by setting -w to the lowest value (1) but the huge use of
memory is what makes the compression better than ordinary compression
programs so it defeats the point. You'll still derive benefit with -w 1 but
not as much.

Q. What CFLAGS should I use?
A. With a recent enough compiler (gcc>4) setting both CFLAGS and CXXFLAGS to
	-O2 -march=native -fomit-frame-pointer

Q. What compiler does this work with?
A. It has been tested on gcc, ekopath and the intel compiler successfully
previously. Whether the commercial compilers help or not, I could not tell you.

Q. What codebase are you basing this on?
A. rzip v2.1 and lzma sdk920, but it should be possible to stay in sync with
each of these in the future.

Q. Do we really need yet another compression format?
A. It's not really a new one at all; simply a reimplementation of a few very
good performing ones that will scale with memory and file size.

Q. How do you use lrzip yourself?
A. Three basic uses. I compress large files currently on my drive with the
-l option since it is so quick to get a space saving. When archiving data for
permanent storage I compress it with the default options. When compressing
small files for distribution I use the -z option for the smallest possible
size.

Q. I found a file that compressed better with plain lzma. How can that be?
A. When the file is more than 5 times the size of the compression window
you have available, the efficiency of rzip preparation drops off as a means
of getting better compression. Eventually when the file is large enough,
plain lzma compression will get better ratios. The lrzip compression will be
a lot faster though. The only way around this is to use as large compression
windows as possible with -U option.

Q. Can I use swapspace as ram for lrzip with a massive window?
A. It will indirectly do this with -U (unlimited) mode enabled. This mode will
make the compression window as big as the file itself no matter how big it is,
but it will slow down proportionately more the bigger the file is than your ram.

Q. Why do you nice it to +19 by default? Can I speed up the compression by
changing the nice value?
A. This is a common misconception about what nice values do. They only tell the
cpu process scheduler how to prioritise workloads, and if your application is
the _only_ thing running it will be no faster at nice -20 nor will it be any
slower at +19.

Q. What is the LZO Testing option, -T?
A. LZO testing is normally performed for the slower back-end compression of LZMA
and ZPAQ. The reasoning is that if it is completely incompressible by LZO then
it will also be incompressible by them. Thus if a block fails to be compressed
by the very fast LZO, lrzip will not attempt to compress that block with the
slower compressor, thereby saving time. If this option is enabled, it will
bypass the LZO testing and attempt to compress each block regardless.

Q. Compression and decompression progress on large archives slows down and
speeds up. There's also a jump in the percentage at the end?
A. Yes, that's the nature of the compression/decompression mechanism. The jump
is because the rzip preparation makes the amount of data much smaller than the
compression backend (lzma) needs to compress.

Q. Tell me about patented compression algorithms, GPL, lawyers and copyright.
A. No

Q. I receive an error "LZMA ERROR: 2. Try a smaller compression window."
   what does this mean?
A. LZMA requests large amounts of memory. When a higher compression window is
   used, there may not be enough contiguous memory for LZMA. LZMA may request
   up to 25% of TOTAL ram depending on compression level. If contiguous blocks
   of memory are not free, LZMA will return an error. This is not a fatal
   error, and a backup mode of compression will be used.

Q. Where can I get more information about the internals of LZMA?
A. See http://www.7-zip.org and http://www.p7zip.org. Also, see the file
   ./lzma/C/lzmalib.h which explains the LZMA properties used and the LZMA
   memory requirements and computation.

Q. This version is much slower than the old version?
A. Make sure you have set CFLAGS and CXXFLAGS. An unoptimised build will be
almost 3 times slower.

LIMITATIONS
Due to mmap limitations the maximum size a window can be set to is currently
2GB on 32bit unless the -U option is specified. Files generated on 64 bit
machines with windows >2GB in size might not be decompressible on 32bit
machines. Large files might not decompress on machines with less RAM if SWAP is
disabled.

BUGS:
Probably lots. Tell me if you spot any :) Any known ones should be documented
in the file BUGS.


Links:
rzip:
http://rzip.samba.org/
lzo:
http://www.oberhumer.com/opensource/lzo/
lzma:
http://www.7-zip.org/
zpaq:
http://mattmahoney.net/dc/

Thanks to Andrew Tridgell for rzip. Thanks to Markus Oberhumer for lzo.
Thanks to Igor Pavlov for lzma. Thanks to Jean-loup Gailly and Mark Adler
for the zlib compression library. Thanks to Christian Leber for lzma
compat layer, Michael J Cohen for Darwin support, Lasse Collin for fix
to LZMALib.cpp and for Makefile.in suggestions, and everyone else who coded
along the way. Huge thanks to Peter Hyman for most of the 0.19-0.24 changes,
and the update to the multithreaded lzma library and all sorts of other
features. Thanks to René Rhéaume for fixing executable stacks and
Ed Avis for various fixes. Thanks to Matt Mahoney for zpaq code. Thanks to
Jukka Laurila for Darwin support. Thanks to George Makrydakis for lrztar.
Thanks to Ulrich Drepper for his md5 implementation. Thanks to Michael
Blumenkrantz for new configuration tools. Thanks to the PolarSSL authors for
encryption code. Thanks to Serge Belyshev for extensive help, advice, and
patches to implement encryption. Michael Blumenkrantz also for liblrzip.

Con Kolivas <kernel@kolivas.org>
Sat, 11 March 2011

Also documented by
Peter Hyman <pete@peterhyman.com>
Sun, 04 Jan 2009