Skip to content

Latest commit

 

History

History
1107 lines (860 loc) · 58.3 KB

abci++_app_requirements.md

File metadata and controls

1107 lines (860 loc) · 58.3 KB
order title
3
Requirements for the Application

Requirements for the Application

Formal Requirements

Consensus Connection Requirements

This section specifies what CometBFT expects from the Application. It is structured as a set of formal requirements that can be used for testing and verification of the Application's logic.

Let p and q be two correct processes. Let rp (resp. rq) be a round of height h where p (resp. q) is the proposer. Let sp,h-1 be p's Application's state committed for height h-1. Let vp (resp. vq) be the block that p's (resp. q's) CometBFT passes on to the Application via PrepareProposalRequest as proposer of round rp (resp rq), height h, also known as the raw proposal. Let up (resp. uq) the possibly modified block p's (resp. q's) Application returns via PrepareProposalResponse to CometBFT, also known as the prepared proposal.

Process p's prepared proposal can differ in two different rounds where p is the proposer.

  • Requirement 1 [PrepareProposal, timeliness]: If p's Application fully executes prepared blocks in PrepareProposal and the network is in a synchronous period while processes p and q are in rp, then the value of TimeoutPropose at q must be such that q's propose timer does not time out (which would result in q prevoting nil in rp).

Full execution of blocks at PrepareProposal time stands on CometBFT's critical path. Thus, Requirement 1 ensures the Application or operator will set a value for TimeoutPropose such that the time it takes to fully execute blocks in PrepareProposal does not interfere with CometBFT's propose timer. Note that the violation of Requirement 1 may lead to further rounds, but will not compromise liveness because even though TimeoutPropose is used as the initial value for proposal timeouts, CometBFT will be dynamically adjust these timeouts such that they will eventually be enough for completing PrepareProposal.

  • Requirement 2 [PrepareProposal, tx-size]: When p's Application calls PrepareProposal, the total size in bytes of the transactions returned does not exceed PrepareProposalRequest.max_tx_bytes.

Busy blockchains might seek to gain full visibility into transactions in CometBFT's mempool, rather than having visibility only on a subset of those transactions that fit in a block. The application can do so by setting ConsensusParams.Block.MaxBytes to -1. This instructs CometBFT (a) to enforce the maximum possible value for MaxBytes (100 MB) at CometBFT level, and (b) to provide all transactions in the mempool when calling PrepareProposal. Under these settings, the aggregated size of all transactions may exceed PrepareProposalRequest.max_tx_bytes. Hence, Requirement 2 ensures that the size in bytes of the transaction list returned by the application will never cause the resulting block to go beyond its byte size limit.

  • Requirement 3 [PrepareProposal, ProcessProposal, coherence]: For any two correct processes p and q, if q's CometBFT calls ProcessProposal on up, q's Application returns Accept in ProcessProposalResponse.

Requirement 3 makes sure that blocks proposed by correct processes always pass the correct receiving process's ProcessProposal check. On the other hand, if there is a deterministic bug in PrepareProposal or ProcessProposal (or in both), strictly speaking, this makes all processes that hit the bug byzantine. This is a problem in practice, as very often validators are running the Application from the same codebase, so potentially all would likely hit the bug at the same time. This would result in most (or all) processes prevoting nil, with the serious consequences on CometBFT's liveness that this entails. Due to its criticality, Requirement 3 is a target for extensive testing and automated verification.

  • Requirement 4 [ProcessProposal, determinism-1]: ProcessProposal is a (deterministic) function of the current state and the block that is about to be applied. In other words, for any correct process p, and any arbitrary block u, if p's CometBFT calls ProcessProposal on u at height h, then p's Application's acceptance or rejection exclusively depends on u and sp,h-1.

  • Requirement 5 [ProcessProposal, determinism-2]: For any two correct processes p and q, and any arbitrary block u, if p's (resp. q's) CometBFT calls ProcessProposal on u at height h, then p's Application accepts u if and only if q's Application accepts u. Note that this requirement follows from Requirement 4 and the Agreement property of consensus.

Requirements 4 and 5 ensure that all correct processes will react in the same way to a proposed block, even if the proposer is Byzantine. However, ProcessProposal may contain a bug that renders the acceptance or rejection of the block non-deterministic, and therefore prevents processes hitting the bug from fulfilling Requirements 4 or 5 (effectively making those processes Byzantine). In such a scenario, CometBFT's liveness cannot be guaranteed. Again, this is a problem in practice if most validators are running the same software, as they are likely to hit the bug at the same point. There is currently no clear solution to help with this situation, so the Application designers/implementers must proceed very carefully with the logic/implementation of ProcessProposal. As a general rule ProcessProposal SHOULD always accept the block.

According to the Tendermint consensus algorithm, currently adopted in CometBFT, a correct process can broadcast at most one precommit message in round r, height h. Since, as stated in the Methods section, ExtendVote is only called when the consensus algorithm is about to broadcast a non-nil precommit message, a correct process can only produce one vote extension in round r, height h. Let erp be the vote extension that the Application of a correct process p returns via ExtendVoteResponse in round r, height h. Let wrp be the proposed block that p's CometBFT passes to the Application via ExtendVoteRequest in round r, height h.

  • Requirement 6 [ExtendVote, VerifyVoteExtension, coherence]: For any two different correct processes p and q, if q receives erp from p in height h, q's Application returns Accept in VerifyVoteExtensionResponse.

Requirement 6 constrains the creation and handling of vote extensions in a similar way as Requirement 3 constrains the creation and handling of proposed blocks. Requirement 6 ensures that extensions created by correct processes always pass the VerifyVoteExtension checks performed by correct processes receiving those extensions. However, if there is a (deterministic) bug in ExtendVote or VerifyVoteExtension (or in both), we will face the same liveness issues as described for Requirement 5, as Precommit messages with invalid vote extensions will be discarded.

  • Requirement 7 [VerifyVoteExtension, determinism-1]: VerifyVoteExtension is a (deterministic) function of the current state, the vote extension received, and the prepared proposal that the extension refers to. In other words, for any correct process p, and any arbitrary vote extension e, and any arbitrary block w, if p's (resp. q's) CometBFT calls VerifyVoteExtension on e and w at height h, then p's Application's acceptance or rejection exclusively depends on e, w and sp,h-1.

  • Requirement 8 [VerifyVoteExtension, determinism-2]: For any two correct processes p and q, and any arbitrary vote extension e, and any arbitrary block w, if p's (resp. q's) CometBFT calls VerifyVoteExtension on e and w at height h, then p's Application accepts e if and only if q's Application accepts e. Note that this requirement follows from Requirement 7 and the Agreement property of consensus.

Requirements 7 and 8 ensure that the validation of vote extensions will be deterministic at all correct processes. Requirements 7 and 8 protect against arbitrary vote extension data from Byzantine processes, in a similar way as Requirements 4 and 5 protect against arbitrary proposed blocks. Requirements 7 and 8 can be violated by a bug inducing non-determinism in VerifyVoteExtension. In this case liveness can be compromised. Extra care should be put in the implementation of ExtendVote and VerifyVoteExtension. As a general rule, VerifyVoteExtension SHOULD always accept the vote extension.

  • Requirement 9 [all, no-side-effects]: p's calls to PrepareProposal, ProcessProposal, ExtendVote, and VerifyVoteExtension at height h do not modify sp,h-1.

  • Requirement 10 [ExtendVote, FinalizeBlock, non-dependency]: for any correct process p, and any vote extension e that p received at height h, the computation of sp,h does not depend on e.

The call to correct process p's FinalizeBlock at height h, with block vp,h passed as parameter, creates state sp,h. Additionally, p's FinalizeBlock creates a set of transaction results Tp,h.

  • Requirement 11 [FinalizeBlock, determinism-1]: For any correct process p, sp,h exclusively depends on sp,h-1 and vp,h.

  • Requirement 12 [FinalizeBlock, determinism-2]: For any correct process p, the contents of Tp,h exclusively depend on sp,h-1 and vp,h.

Note that Requirements 11 and 12, combined with the Agreement property of consensus ensure state machine replication, i.e., the Application state evolves consistently at all correct processes.

Also, notice that neither PrepareProposal nor ExtendVote have determinism-related requirements associated. Indeed, PrepareProposal is not required to be deterministic:

  • up may depend on vp and sp,h-1, but may also depend on other values or operations.
  • vp = vq ⇏ up = uq.

Likewise, ExtendVote can also be non-deterministic:

  • erp may depend on wrp and sp,h-1, but may also depend on other values or operations.
  • wrp = wrq ⇏ erp = erq

Mempool Connection Requirements

Let CheckTxCodestx,p,h denote the set of result codes returned by p's Application, via CheckTxResponse, to successive calls to CheckTx occurring while the Application is at height h and having transaction tx as parameter. CheckTxCodestx,p,h is a set since p's Application may return different result codes during height h. If CheckTxCodestx,p,h is a singleton set, i.e. the Application always returned the same result code in CheckTxResponse while at height h, we define CheckTxCodetx,p,h as the singleton value of CheckTxCodestx,p,h. If CheckTxCodestx,p,h is not a singleton set, CheckTxCodetx,p,h is undefined. Let predicate OK(CheckTxCodetx,p,h) denote whether CheckTxCodetx,p,h is SUCCESS.

  • Requirement 13 [CheckTx, eventual non-oscillation]: For any transaction tx, there exists a boolean value b, and a height hstable such that, for any correct process p, CheckTxCodetx,p,h is defined, and OK(CheckTxCodetx,p,h) = b for any height h ≥ hstable.

Requirement 13 ensures that a transaction will eventually stop oscillating between CheckTx success and failure if it stays in p's mempool for long enough. This condition on the Application's behavior allows the mempool to ensure that a transaction will leave the mempool of all full nodes, either because it is expunged everywhere due to failing CheckTx calls, or because it stays valid long enough to be gossipped, proposed and decided. Although Requirement 13 defines a global hstable, application developers can consider such stabilization height as local to process p (hp,stable), without loss for generality. In contrast, the value of b MUST be the same across all processes.

Managing the Application state and related topics

Connection State

CometBFT maintains four concurrent ABCI connections, namely Consensus Connection, Mempool Connection, Info/Query Connection, and Snapshot Connection. It is common for an application to maintain a distinct copy of the state for each connection, which are synchronized upon Commit calls.

Concurrency

In principle, each of the four ABCI connections operates concurrently with one another. This means applications need to ensure access to state is thread safe. Both the default in-process ABCI client and the default Go ABCI server use a global lock to guard the handling of events across all connections, so they are not concurrent at all. This means whether your app is compiled in-process with CometBFT using the NewLocalClient, or run out-of-process using the SocketServer, ABCI messages from all connections are received in sequence, one at a time.

The existence of this global mutex means Go application developers can get thread safety for application state by routing all reads and writes through the ABCI system. Thus it may be unsafe to expose application state directly to an RPC interface, and unless explicit measures are taken, all queries should be routed through the ABCI Query method.

FinalizeBlock

When the consensus algorithm decides on a block, CometBFT uses FinalizeBlock to send the decided block's data to the Application, which uses it to transition its state, but MUST NOT persist it; persisting MUST be done during Commit.

The Application must remember the latest height from which it has run a successful Commit so that it can tell CometBFT where to pick up from when it recovers from a crash. See information on the Handshake here.

Commit

The Application should persist its state during Commit, before returning from it.

Before invoking Commit, CometBFT locks the mempool and flushes the mempool connection. This ensures that no new messages will be received on the mempool connection during this processing step, providing an opportunity to safely update all four connection states to the latest committed state at the same time.

CometBFT unlocks the mempool after it has finished updating for the new block, which occurs asynchronously from Commit. See Mempool Update for more information on what the update task does.

WARNING: if the ABCI app logic processing the Commit message sends a /broadcast_tx_sync or /broadcast_tx and waits for the response before proceeding, it will deadlock. Executing broadcast_tx calls involves acquiring the mempool lock that CometBFT holds during the Commit call. Synchronous mempool-related calls must be avoided as part of the sequential logic of the Commit function.

Candidate States

CometBFT calls PrepareProposal when it is about to send a proposed block to the network. Likewise, CometBFT calls ProcessProposal upon reception of a proposed block from the network. The proposed block's data that is disclosed to the Application by these two methods is the following:

  • the transaction list
  • the LastCommit referring to the previous block
  • the block header's hash (except in PrepareProposal, where it is not known yet)
  • list of validators that misbehaved
  • the block's timestamp
  • NextValidatorsHash
  • Proposer address

The Application may decide to immediately execute the given block (i.e., upon PrepareProposal or ProcessProposal). There are two main reasons why the Application may want to do this:

  • Avoiding invalid transactions in blocks. In order to be sure that the block does not contain any invalid transaction, there may be no way other than fully executing the transactions in the block as though it was the decided block.
  • Quick FinalizeBlock execution. Upon reception of the decided block via FinalizeBlock, if that same block was executed upon PrepareProposal or ProcessProposal and the resulting state was kept in memory, the Application can simply apply that state (faster) to the main state, rather than reexecuting the decided block (slower).

PrepareProposal/ProcessProposal can be called many times for a given height. Moreover, it is not possible to accurately predict which of the blocks proposed in a height will be decided, being delivered to the Application in that height's FinalizeBlock. Therefore, the state resulting from executing a proposed block, denoted a candidate state, should be kept in memory as a possible final state for that height. When FinalizeBlock is called, the Application should check if the decided block corresponds to one of its candidate states; if so, it will apply it as its ExecuteTxState (see Consensus Connection below), which will be persisted during the upcoming Commit call.

Under adverse conditions (e.g., network instability), the consensus algorithm might take many rounds. In this case, potentially many proposed blocks will be disclosed to the Application for a given height. By the nature of Tendermint consensus algorithm, currently adopted in CometBFT, the number of proposed blocks received by the Application for a particular height cannot be bound, so Application developers must act with care and use mechanisms to bound memory usage. As a general rule, the Application should be ready to discard candidate states before FinalizeBlock, even if one of them might end up corresponding to the decided block and thus have to be reexecuted upon FinalizeBlock.

States and ABCI Connections

Consensus Connection

The Consensus Connection should maintain an ExecuteTxState — the working state for block execution. It should be updated by the call to FinalizeBlock during block execution and committed to disk as the "latest committed state" during Commit. Execution of a proposed block (via PrepareProposal/ProcessProposal) must not update the ExecuteTxState, but rather be kept as a separate candidate state until FinalizeBlock confirms which of the candidate states (if any) can be used to update ExecuteTxState.

Mempool Connection

The mempool Connection maintains CheckTxState. CometBFT sequentially processes an incoming transaction (via RPC from client or P2P from the gossip layer) against CheckTxState. If the processing does not return any error, the transaction is accepted into the mempool and CometBFT starts gossipping it. CheckTxState should be reset to the latest committed state at the end of every Commit.

During the execution of a consensus instance, the CheckTxState may be updated concurrently with the ExecuteTxState, as messages may be sent concurrently on the Consensus and Mempool connections. At the end of the consensus instance, as described above, CometBFT locks the mempool and flushes the mempool connection before calling Commit. This ensures that all pending CheckTx calls are responded to and no new ones can begin.

After the Commit call returns, while still holding the mempool lock, CheckTx is run again on all transactions that remain in the node's local mempool after filtering those included in the block. Parameter Type in CheckTxRequest indicates whether an incoming transaction is new (CHECK_TX_TYPE_NEW), or a recheck (CHECK_TX_TYPE_RECHECK).

Finally, after re-checking transactions in the mempool, CometBFT will unlock the mempool connection. New transactions are once again able to be processed through CheckTx.

Note that CheckTx is just a weak filter to keep invalid transactions out of the mempool and, ultimately, ouf of the blockchain. Since the transaction cannot be guaranteed to be checked against the exact same state as it will be executed as part of a (potential) decided block, CheckTx shouldn't check everything that affects the transaction's validity, in particular those checks whose validity may depend on transaction ordering. CheckTx is weak because a Byzantine node need not care about CheckTx; it can propose a block full of invalid transactions if it wants. The mechanism ABCI, from version 1.0, has in place for dealing with such behavior is ProcessProposal.

Replay Protection

It is possible for old transactions to be sent again to the Application. This is typically undesirable for all transactions, except for a generally small subset of them which are idempotent.

The mempool has a mechanism to prevent duplicated transactions from being processed. This mechanism is nevertheless best-effort (currently based on the indexer) and does not provide any guarantee of non duplication. It is thus up to the Application to implement an application-specific replay protection mechanism with strong guarantees as part of the logic in CheckTx.

Info/Query Connection

The Info (or Query) Connection should maintain a QueryState. This connection has two purposes: 1) having the application answer the queries CometBFT receives from users (see section Query), and 2) synchronizing CometBFT and the Application at start up time (see Crash Recovery) or after state sync (see State Sync).

QueryState is a read-only copy of ExecuteTxState as it was after the last Commit, i.e. after the full block has been processed and the state committed to disk.

Snapshot Connection

The Snapshot Connection is used to serve state sync snapshots for other nodes and/or restore state sync snapshots to a local node being bootstrapped. Snapshot management is optional: an Application may choose not to implement it.

For more information, see Section State Sync.

Transaction Results

The Application is expected to return a list of ExecTxResult in FinalizeBlockResponse. The list of transaction results MUST respect the same order as the list of transactions delivered via FinalizeBlockRequest. This section discusses the fields inside this structure, along with the fields in CheckTxResponse, whose semantics are similar.

The Info and Log fields are non-deterministic values for debugging/convenience purposes. CometBFT logs them but they are otherwise ignored.

Gas

Ethereum introduced the notion of gas as an abstract representation of the cost of the resources consumed by nodes when processing a transaction. Every operation in the Ethereum Virtual Machine uses some amount of gas. Gas has a market-variable price based on which miners can accept or reject to execute a particular operation.

Users propose a maximum amount of gas for their transaction; if the transaction uses less, they get the difference credited back. CometBFT adopts a similar abstraction, though uses it only optionally and weakly, allowing applications to define their own sense of the cost of execution.

In CometBFT, the ConsensusParams.Block.MaxGas limits the amount of total gas that can be used by all transactions in a block. The default value is -1, which means the block gas limit is not enforced, or that the concept of gas is meaningless.

Responses contain a GasWanted and GasUsed field. The former is the maximum amount of gas the sender of a transaction is willing to use, and the latter is how much it actually used. Applications should enforce that GasUsed <= GasWanted — i.e. transaction execution or validation should fail before it can use more resources than it requested.

When MaxGas > -1, CometBFT enforces the following rules:

  • GasWanted <= MaxGas for every transaction in the mempool
  • (sum of GasWanted in a block) <= MaxGas when proposing a block

If MaxGas == -1, no rules about gas are enforced.

In v0.34.x and earlier versions, CometBFT does not enforce anything about Gas in consensus, only in the mempool. This means it does not guarantee that committed blocks satisfy these rules. It is the application's responsibility to return non-zero response codes when gas limits are exceeded when executing the transactions of a block. Since the introduction of PrepareProposal and ProcessProposal in v.0.37.x, it is now possible for the Application to enforce that all blocks proposed (and voted for) in consensus — and thus all blocks decided — respect the MaxGas limits described above.

Since the Application should enforce that GasUsed <= GasWanted when executing a transaction, and it can use PrepareProposal and ProcessProposal to enforce that (sum of GasWanted in a block) <= MaxGas in all proposed or prevoted blocks, we have:

  • (sum of GasUsed in a block) <= MaxGas for every block

The GasUsed field is ignored by CometBFT.

Specifics of CheckTxResponse

If Code != 0, it will be rejected from the mempool and hence not broadcasted to other peers and not included in a proposal block.

Data contains the result of the CheckTx transaction execution, if any. It does not need to be deterministic since, given a transaction, nodes' Applications might have a different CheckTxState values when they receive it and check their validity via CheckTx. CometBFT ignores this value in CheckTxResponse.

From v0.34.x on, there is a Priority field in CheckTxResponse that can be used to explicitly prioritize transactions in the mempool for inclusion in a block proposal.

Specifics of ExecTxResult

FinalizeBlock is the workhorse of the blockchain. CometBFT delivers the decided block, including the list of all its transactions synchronously to the Application. The block delivered (and thus the transaction order) is the same at all correct nodes as guaranteed by the Agreement property of consensus.

The Data field in ExecTxResult contains an array of bytes with the transaction result. It must be deterministic (i.e., the same value must be returned at all nodes), but it can contain arbitrary data. Likewise, the value of Code must be deterministic. If Code != 0, the transaction will be marked invalid, though it is still included in the block. Invalid transactions are not indexed, as they are considered analogous to those that failed CheckTx.

Both the Code and Data are included in a structure that is hashed into the LastResultsHash of the block header in the next height.

Events include any events for the execution, which CometBFT will use to index the transaction by. This allows transactions to be queried according to what events took place during their execution.

Updating the Validator Set

The application may set the validator set during InitChain, and may update it during FinalizeBlock. In both cases, a structure of type ValidatorUpdate is returned.

The InitChain method, used to initialize the Application, can return a list of validators. If the list is empty, CometBFT will use the validators loaded from the genesis file. If the list returned by InitChain is not empty, CometBFT will use its contents as the validator set. This way the application can set the initial validator set for the blockchain.

Applications must ensure that a single set of validator updates does not contain duplicates, i.e. a given public key can only appear once within a given update. If an update includes duplicates, the block execution will fail irrecoverably.

Structure ValidatorUpdate contains a public key, which is used to identify the validator: The public key currently supports three types:

  • ed25519
  • secp256k1
  • sr25519

Structure ValidatorUpdate also contains an ìnt64 field denoting the validator's new power. Applications must ensure that ValidatorUpdate structures abide by the following rules:

  • power must be non-negative
  • if power is set to 0, the validator must be in the validator set; it will be removed from the set
  • if power is greater than 0:
    • if the validator is not in the validator set, it will be added to the set with the given power
    • if the validator is in the validator set, its power will be adjusted to the given power
  • the total power of the new validator set must not exceed MaxTotalVotingPower, where MaxTotalVotingPower = MaxInt64 / 8

Note the updates returned after processing the block at height H will only take effect at block H+2 (see Section Methods).

Consensus Parameters

ConsensusParams are global parameters that apply to all validators in a blockchain. They enforce certain limits in the blockchain, like the maximum size of blocks, amount of gas used in a block, and the maximum acceptable age of evidence. They can be set in InitChain, and updated in FinalizeBlock. These parameters are deterministically set and/or updated by the Application, so all full nodes have the same value at a given height.

List of Parameters

These are the current consensus parameters (as of v1.0.x):

  1. BlockParams.MaxBytes
  2. BlockParams.MaxGas
  3. EvidenceParams.MaxAgeDuration
  4. EvidenceParams.MaxAgeNumBlocks
  5. EvidenceParams.MaxBytes
  6. FeatureParams.PbtsEnableHeight
  7. FeatureParams.VoteExtensionsEnableHeight
  8. ValidatorParams.PubKeyTypes
  9. VersionParams.App
  10. SynchronyParams.Precision
  11. SynchronyParams.MessageDelay
BlockParams.MaxBytes

The maximum size of a complete Protobuf encoded block. This is enforced by the consensus algorithm.

This implies a maximum transaction size that is this MaxBytes, less the expected size of the header, the validator set, and any included evidence in the block.

The Application should be aware that honest validators may produce and broadcast blocks with up to the configured MaxBytes size. As a result, the consensus timeout parameters adopted by nodes should be configured so as to account for the worst-case latency for the delivery of a full block with MaxBytes size to all validators.

If the Application wants full control over the size of blocks, it can do so by enforcing a byte limit set up at the Application level. This Application-internal limit is used by PrepareProposal to bound the total size of transactions it returns, and by ProcessProposal to reject any received block whose total transaction size is bigger than the enforced limit. In such case, the Application MAY set MaxBytes to -1.

If the Application sets value -1, consensus will:

  • consider that the actual value to enforce is 100 MB
  • will provide all transactions in the mempool in calls to PrepareProposal

Must have MaxBytes == -1 OR 0 < MaxBytes <= 100 MB.

Bear in mind that the default value for the BlockParams.MaxBytes consensus parameter accepts as valid blocks with size up to 21 MB. If the Application's use case does not need blocks of that size, or if the impact (specially on bandwidth consumption and block latency) of propagating blocks of that size was not evaluated, it is strongly recommended to wind down this default value.

BlockParams.MaxGas

The maximum of the sum of GasWanted that will be allowed in a proposed block. This is not enforced by the consensus algorithm. It is left to the Application to enforce (ie. if transactions are included past the limit, they should return non-zero codes). It is used by CometBFT to limit the transactions included in a proposed block.

Must have MaxGas >= -1. If MaxGas == -1, no limit is enforced.

EvidenceParams.MaxAgeDuration

This is the maximum age of evidence in time units. This is enforced by the consensus algorithm.

If a block includes evidence older than this (AND the evidence was created more than MaxAgeNumBlocks ago), the block will be rejected (validators won't vote for it).

Must have MaxAgeDuration > 0.

EvidenceParams.MaxAgeNumBlocks

This is the maximum age of evidence in blocks. This is enforced by the consensus algorithm.

If a block includes evidence older than this (AND the evidence was created more than MaxAgeDuration ago), the block will be rejected (validators won't vote for it).

Must have MaxAgeNumBlocks > 0.

EvidenceParams.MaxBytes

This is the maximum size of total evidence in bytes that can be committed to a single block. It should fall comfortably under the max block bytes.

Its value must not exceed the size of a block minus its overhead ( ~ BlockParams.MaxBytes).

Must have MaxBytes > 0.

FeatureParams.PbtsEnableHeight

Height at which Proposer-Based Timestamps (PBTS) will be enabled.

From the specified height, and for all subsequent heights, the PBTS algorithm will be used to produce and validate block timestamps. Prior to this height, or when this height is set to 0, the legacy BFT Time algorithm is used to produce and validate timestamps.

PBTS cannot be disabled once it is enabled.

Cannot be set to heights lower or equal to the current blockchain height.

Must have PbtsEnableHeight > [Current height]

FeatureParams.VoteExtensionsEnableHeight

This parameter is either 0 or a positive height at which vote extensions become mandatory. If the value is zero (which is the default), vote extensions are not expected. Otherwise, at all heights greater than the configured height H vote extensions must be present (even if empty). When the configured height H is reached, PrepareProposal will not include vote extensions yet, but ExtendVote and VerifyVoteExtension will be called. Then, when reaching height H+1, PrepareProposal will include the vote extensions from height H. For all heights after H

  • vote extensions cannot be disabled,
  • they are mandatory: all precommit messages sent MUST have an extension attached. Nevertheless, the application MAY provide 0-length extensions.

Must always be set to a future height, 0, or the same height that was previously set. Once the chain's height reaches the value set, it cannot be changed to a different value.

ValidatorParams.PubKeyTypes

The parameter restricts the type of keys validators can use. The parameter uses ABCI pubkey naming, not Amino names.

VersionParams.App

This is the version of the ABCI application.

SynchronyParams.Precision

This sets a bound on how skewed a proposer's clock may be from any validator on the network while still producing valid proposals.

This parameter is used by the Proposer-Based Timestamps (PBTS) algorithm.

SynchronyParams.MessageDelay

This sets a bound on how long a proposal message may take to reach all validators on a network and still be considered valid.

This parameter is used by the Proposer-Based Timestamps (PBTS) algorithm.

Updating Consensus Parameters

The application may set the ConsensusParams during InitChain, and update them during FinalizeBlock. If the ConsensusParams is empty, it will be ignored. Each field that is not empty will be applied in full. For instance, if updating the Block.MaxBytes, applications must also set the other Block fields (like Block.MaxGas), even if they are unchanged, as they will otherwise cause the value to be updated to the default.

InitChain

InitChainResponse includes a ConsensusParams parameter. If ConsensusParams is nil, CometBFT will use the params loaded in the genesis file. If ConsensusParams is not nil, CometBFT will use it. This way the application can determine the initial consensus parameters for the blockchain.

FinalizeBlock, PrepareProposal/ProcessProposal

FinalizeBlockResponse accepts a ConsensusParams parameter. If ConsensusParams is nil, CometBFT will do nothing. If ConsensusParams is not nil, CometBFT will use it. This way the application can update the consensus parameters over time.

The updates returned in block H will take effect right away for block H+1.

Query

Query is a generic method with lots of flexibility to enable diverse sets of queries on application state. CometBFT makes use of Query to filter new peers based on ID and IP, and exposes Query to the user over RPC.

Note that calls to Query are not replicated across nodes, but rather query the local node's state - hence they may return stale reads. For reads that require consensus, use a transaction.

The most important use of Query is to return Merkle proofs of the application state at some height that can be used for efficient application-specific light-clients.

Note CometBFT has technically no requirements from the Query message for normal operation - that is, the ABCI app developer need not implement Query functionality if they do not wish to.

Query Proofs

The CometBFT block header includes a number of hashes, each providing an anchor for some type of proof about the blockchain. The ValidatorsHash enables quick verification of the validator set, the DataHash gives quick verification of the transactions included in the block.

The AppHash is unique in that it is application specific, and allows for application-specific Merkle proofs about the state of the application. While some applications keep all relevant state in the transactions themselves (like Bitcoin and its UTXOs), others maintain a separated state that is computed deterministically from transactions, but is not contained directly in the transactions themselves (like Ethereum contracts and accounts). For such applications, the AppHash provides a much more efficient way to verify light-client proofs.

ABCI applications can take advantage of more efficient light-client proofs for their state as follows:

  • return the Merkle root of the deterministic application state in FinalizeBlockResponse.Data. This Merkle root will be included as the AppHash in the next block.
  • return efficient Merkle proofs about that application state in QueryResponse.Proof that can be verified using the AppHash of the corresponding block.

For instance, this allows an application's light-client to verify proofs of absence in the application state, something which is much less efficient to do using the block hash.

Some applications (eg. Ethereum, Cosmos-SDK) have multiple "levels" of Merkle trees, where the leaves of one tree are the root hashes of others. To support this, and the general variability in Merkle proofs, the QueryResponse.Proof has some minimal structure:

message ProofOps {
  repeated ProofOp ops = 1
}

message ProofOp {
  string type = 1;
  bytes key   = 2;
  bytes data  = 3;
}

Each ProofOp contains a proof for a single key in a single Merkle tree, of the specified type. This allows ABCI to support many different kinds of Merkle trees, encoding formats, and proofs (eg. of presence and absence) just by varying the type. The data contains the actual encoded proof, encoded according to the type. When verifying the full proof, the root hash for one ProofOp is the value being verified for the next ProofOp in the list. The root hash of the final ProofOp in the list should match the AppHash being verified against.

Peer Filtering

When CometBFT connects to a peer, it sends two queries to the ABCI application using the following paths, with no additional data:

  • /p2p/filter/addr/<IP:PORT>, where <IP:PORT> denote the IP address and the port of the connection
  • p2p/filter/id/<ID>, where <ID> is the peer node ID (ie. the pubkey.Address() for the peer's PubKey)

If either of these queries return a non-zero ABCI code, CometBFT will refuse to connect to the peer.

Paths

Queries are directed at paths, and may optionally include additional data.

The expectation is for there to be some number of high level paths differentiating concerns, like /p2p, /store, and /app. Currently, CometBFT only uses /p2p, for filtering peers. For more advanced use, see the implementation of Query in the Cosmos-SDK.

Crash Recovery

CometBFT and the application are expected to crash together and there should not exist a scenario where the application has persisted state of a height greater than the latest height persisted by CometBFT.

In practice, persisting the state of a height consists of three steps, the last of which is the call to the application's Commit method, the only place where the application is expected to persist/commit its state. On startup (upon recovery), CometBFT calls the Info method on the Info Connection to get the latest committed state of the app. The app MUST return information consistent with the last block for which it successfully completed Commit.

The three steps performed before the state of a height is considered persisted are:

  • The block is stored by CometBFT in the blockstore
  • CometBFT has stored the state returned by the application through FinalizeBlockResponse
  • The application has committed its state within Commit.

The following diagram depicts the order in which these events happen, and the corresponding ABCI functions that are called and executed by CometBFT and the application:

APP:                                              Execute block                         Persist application state
                                                 /     return ResultFinalizeBlock            /
                                                /                                           /
Event: ------------- block_stored ------------ / ------------ state_stored --------------- / ----- app_persisted_state
                          |                   /                   |                       /        |
CometBFT: Decide --- Persist block -- Call FinalizeBlock - Persist results ---------- Call Commit --
            on        in the                                (txResults, validator
           Block      block store                              updates...)

As these three steps are not atomic, we observe different cases based on which steps have been executed before the crash occurred (we assume that at least block_stored has been executed, otherwise, there is no state persisted, and the operations for this height are repeated entirely):

  • block_stored: we replay FinalizeBlock and the steps afterwards.
  • block_stored and state_stored: As the app did not persist its state within Commit, we need to re-execute FinalizeBlock to retrieve the results and compare them to the state stored by CometBFT within state_stored. The expected case is that the states will match, otherwise CometBFT panics.
  • block_stored, state_stored, app_persisted_state: we move on to the next height.

Based on the sequence of these events, CometBFT will panic if any of the steps in the sequence happen out of order, that is if:

  • The application has persisted a block at a height higher than the blocked saved during state_stored.
  • The block_stored step persisted a block at a height smaller than the state_stored
  • And the difference between the heights of the blocks persisted by state_stored and block_stored is more than 1 (this corresponds to a scenario where we stored two blocks in the block store but never persisted the state of the first block, which should never happen).

A special case is when a crash happens before the first block is committed - that is, after calling InitChain. In that case, the application's state should still be at height 0 and thus InitChain will be called again.

State Sync

A new node joining the network can simply join consensus at the genesis height and replay all historical blocks until it is caught up. However, for large chains this can take a significant amount of time, often on the order of days or weeks.

State sync is an alternative mechanism for bootstrapping a new node, where it fetches a snapshot of the state machine at a given height and restores it. Depending on the application, this can be several orders of magnitude faster than replaying blocks.

Note that state sync does not currently backfill historical blocks, so the node will have a truncated block history - users are advised to consider the broader network implications of this in terms of block availability and auditability. This functionality may be added in the future.

For details on the specific ABCI calls and types, see the methods section.

Taking Snapshots

Applications that want to support state syncing must take state snapshots at regular intervals. How this is accomplished is entirely up to the application. A snapshot consists of some metadata and a set of binary chunks in an arbitrary format:

  • Height (uint64): The height at which the snapshot is taken. It must be taken after the given height has been committed, and must not contain data from any later heights.

  • Format (uint32): An arbitrary snapshot format identifier. This can be used to version snapshot formats, e.g. to switch from Protobuf to MessagePack for serialization. The application can use this when restoring to choose whether to accept or reject a snapshot.

  • Chunks (uint32): The number of chunks in the snapshot. Each chunk contains arbitrary binary data, and should be less than 16 MB; 10 MB is a good starting point.

  • Hash ([]byte): An arbitrary hash of the snapshot. This is used to check whether a snapshot is the same across nodes when downloading chunks.

  • Metadata ([]byte): Arbitrary snapshot metadata, e.g. chunk hashes for verification or any other necessary info.

For a snapshot to be considered the same across nodes, all of these fields must be identical. When sent across the network, snapshot metadata messages are limited to 4 MB.

When a new node is running state sync and discovering snapshots, CometBFT will query an existing application via the ABCI ListSnapshots method to discover available snapshots, and load binary snapshot chunks via LoadSnapshotChunk. The application is free to choose how to implement this and which formats to use, but must provide the following guarantees:

  • Consistent: A snapshot must be taken at a single isolated height, unaffected by concurrent writes. This can be accomplished by using a data store that supports ACID transactions with snapshot isolation.

  • Asynchronous: Taking a snapshot can be time-consuming, so it must not halt chain progress, for example by running in a separate thread.

  • Deterministic: A snapshot taken at the same height in the same format must be identical (at the byte level) across nodes, including all metadata. This ensures good availability of chunks, and that they fit together across nodes.

A very basic approach might be to use a datastore with MVCC transactions (such as RocksDB), start a transaction immediately after block commit, and spawn a new thread which is passed the transaction handle. This thread can then export all data items, serialize them using e.g. Protobuf, hash the byte stream, split it into chunks, and store the chunks in the file system along with some metadata - all while the blockchain is applying new blocks in parallel.

A more advanced approach might include incremental verification of individual chunks against the chain app hash, parallel or batched exports, compression, and so on.

Old snapshots should be removed after some time - generally only the last two snapshots are needed (to prevent the last one from being removed while a node is restoring it).

Bootstrapping a Node

An empty node can be state synced by setting the configuration option statesync.enabled = true. The node also needs the chain genesis file for basic chain info, and configuration for light client verification of the restored snapshot: a set of CometBFT RPC servers, and a trusted header hash and corresponding height from a trusted source, via the statesync configuration section.

Once started, the node will connect to the P2P network and begin discovering snapshots. These will be offered to the local application via the OfferSnapshot ABCI method. Once a snapshot is accepted CometBFT will fetch and apply the snapshot chunks. After all chunks have been successfully applied, CometBFT verifies the app's AppHash against the chain using the light client, then switches the node to normal consensus operation.

Snapshot Discovery

When the empty node joins the P2P network, it asks all peers to report snapshots via the ListSnapshots ABCI call (limited to 10 per node). After some time, the node picks the most suitable snapshot (generally prioritized by height, format, and number of peers), and offers it to the application via OfferSnapshot. The application can choose a number of responses, including accepting or rejecting it, rejecting the offered format, rejecting the peer who sent it, and so on. CometBFT will keep discovering and offering snapshots until one is accepted or the application aborts.

Snapshot Restoration

Once a snapshot has been accepted via OfferSnapshot, CometBFT begins downloading chunks from any peers that have the same snapshot (i.e. that have identical metadata fields). Chunks are spooled in a temporary directory, and then given to the application in sequential order via ApplySnapshotChunk until all chunks have been accepted.

The method for restoring snapshot chunks is entirely up to the application.

During restoration, the application can respond to ApplySnapshotChunk with instructions for how to continue. This will typically be to accept the chunk and await the next one, but it can also ask for chunks to be refetched (either the current one or any number of previous ones), P2P peers to be banned, snapshots to be rejected or retried, and a number of other responses - see the ABCI reference for details.

If CometBFT fails to fetch a chunk after some time, it will reject the snapshot and try a different one via OfferSnapshot - the application can choose whether it wants to support restarting restoration, or simply abort with an error.

Snapshot Verification

Once all chunks have been accepted, CometBFT issues an Info ABCI call to retrieve the LastBlockAppHash. This is compared with the trusted app hash from the chain, retrieved and verified using the light client. CometBFT also checks that LastBlockHeight corresponds to the height of the snapshot.

This verification ensures that an application is valid before joining the network. However, the snapshot restoration may take a long time to complete, so applications may want to employ additional verification during the restore to detect failures early. This might e.g. include incremental verification of each chunk against the app hash (using bundled Merkle proofs), checksums to protect against data corruption by the disk or network, and so on. However, it is important to note that the only trusted information available is the app hash, and all other snapshot metadata can be spoofed by adversaries.

Apps may also want to consider state sync denial-of-service vectors, where adversaries provide invalid or harmful snapshots to prevent nodes from joining the network. The application can counteract this by asking CometBFT to ban peers. As a last resort, node operators can use P2P configuration options to whitelist a set of trusted peers that can provide valid snapshots.

Transition to Consensus

Once the snapshots have all been restored, CometBFT gathers additional information necessary for bootstrapping the node (e.g. chain ID, consensus parameters, validator sets, and block headers) from the genesis file and light client RPC servers. It also calls Info to verify the following:

  • that the app hash from the snapshot it has delivered to the Application matches the apphash stored in the next height's block
  • that the version that the Application returns in InfoResponse matches the version in the current height's block header

Once the state machine has been restored and CometBFT has gathered this additional information, it transitions to consensus. As of ABCI 2.0, CometBFT ensures the necessary conditions to switch are met RFC-100. From the application's point of view, these operations are transparent, unless the application has just upgraded to ABCI 2.0. In that case, the application needs to be properly configured and aware of certain constraints in terms of when to provide vote extensions. More details can be found in the section below.

Once a node switches to consensus, it operates like any other node, apart from having a truncated block history at the height of the restored snapshot.

Application configuration required to switch to ABCI 2.0

Introducing vote extensions requires changes to the configuration of the application.

First of all, switching to a version of CometBFT with vote extensions, requires a coordinated upgrade. For a detailed description on the upgrade path, please refer to the corresponding section in RFC-100.

There is a newly introduced consensus parameter: VoteExtensionsEnableHeight. This parameter represents the height at which vote extensions are required for consensus to proceed, with 0 being the default value (no vote extensions). A chain can enable vote extensions either:

  • at genesis by setting VoteExtensionsEnableHeight to be equal, e.g., to the InitialHeight
  • or via the application logic by changing the ConsensusParam to configure the VoteExtensionsEnableHeight.

Once the (coordinated) upgrade to ABCI 2.0 has taken place, at height hu, the value of VoteExtensionsEnableHeight MAY be set to some height, he, which MUST be higher than the current height of the chain. Thus the earliest value for he is hu + 1.

Once a node reaches the configured height, for all heights h ≥ he, the consensus algorithm will reject as invalid any precommit messages that do not have signed vote extension data. If the application requires it, a 0-length vote extension is allowed, but it MUST be signed and present in the precommit message. Likewise, for all heights h < he, any precommit messages that do have vote extensions will also be rejected as malformed. Height he is somewhat special, as calls to PrepareProposal MUST NOT have vote extension data, but all precommit votes in that height MUST carry a vote extension, even if the extension is nil. Height he + 1 is the first height for which PrepareProposal MUST have vote extension data and all precommit votes in that height MUST have a vote extension.

Corollary, CometBFT will decide which data to store, and require for successful operations, based on the current height of the chain.