Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

路由器重启后wifi不会默认打开 #8787

Open
1 task done
Jinnrry opened this issue Jan 29, 2022 · 7 comments
Open
1 task done

路由器重启后wifi不会默认打开 #8787

Jinnrry opened this issue Jan 29, 2022 · 7 comments

Comments

@Jinnrry
Copy link

Jinnrry commented Jan 29, 2022

反馈bug/问题模板，提建议请删除

1.关于你要提交的问题

Q：是否搜索了issue (使用 "x" 选择)

  • 没有类似的issue

2. 详细叙述

(1) 具体问题

A：路由器只要重启以后，无线网络不会默认打开，必须手动开启一次无线网络

(2) 路由器型号和固件版本

A：新3 OpenWrt R22.1.1 / LuCI Master (git-21.335.48743-5f363d9)

(3) 详细日志

A：

[    0.000000] Linux version 5.4.162 (jiangwe@DESKTOP-8K03O5L) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r4079-60e275903)) #0 SMP Thu Jan 13 02:11:31 2022
[    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[    0.000000] printk: bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[    0.000000] MIPS: machine is Newifi-D2
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] VPE topology {2,2} total 4
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000]   HighMem  [mem 0x0000000010000000-0x0000000023ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000001bffffff]
[    0.000000]   node   0: [mem 0x0000000020000000-0x0000000023ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000023ffffff]
[    0.000000] On node 0 totalpages: 131072
[    0.000000]   Normal zone: 576 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 65536 pages, LIFO batch:15
[    0.000000]   HighMem zone: 65536 pages, LIFO batch:15
[    0.000000] percpu: Embedded 14 pages/cpu s26992 r8192 d22160 u57344
[    0.000000] pcpu-alloc: s26992 r8192 d22160 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 130496
[    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=00008c10
[    0.000000] Readback ErrCtl register=00008c10
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 509428K/524288K available (6135K kernel code, 254K rwdata, 1288K rodata, 1268K init, 238K bss, 14860K reserved, 0K cma-reserved, 262144K highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 256
[    0.000000] random: get_random_bytes called from start_kernel+0x36c/0x584 with crng_init=0
[    0.000000] CPU Clock: 880MHz
[    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
[    0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
[    0.007825] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
[    0.073989] pid_max: default: 32768 minimum: 301
[    0.078805] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.086006] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.096800] rcu: Hierarchical SRCU implementation.
[    0.102208] smp: Bringing up secondary CPUs ...
[    0.364270] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.364281] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.364294] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.364411] CPU1 revision is: 0001992f (MIPS 1004Kc)
[    0.167043] Synchronize counters for CPU 1: done.
[    0.089511] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.089520] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.089530] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.089590] CPU2 revision is: 0001992f (MIPS 1004Kc)
[    0.257875] Synchronize counters for CPU 2: done.
[    0.178751] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.178759] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.178769] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.178839] CPU3 revision is: 0001992f (MIPS 1004Kc)
[    0.343057] Synchronize counters for CPU 3: done.
[    0.372932] smp: Brought up 1 node, 4 CPUs
[    0.381716] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.391512] futex hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.398540] pinctrl core: initialized pinctrl subsystem
[    0.405482] NET: Registered protocol family 16
[    0.422979] FPU Affinity set after 11720 emulations
[    0.442577] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
[    0.454107] clocksource: Switched to clocksource GIC
[    0.461040] NET: Registered protocol family 2
[    0.465591] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.468505] random: fast init done
[    0.473398] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.484527] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.492116] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.499232] TCP: Hash tables configured (established 2048 bind 2048)
[    0.505704] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.512164] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.519445] NET: Registered protocol family 1
[    0.523739] PCI: CLS 0 bytes, default 32
[    0.764035] 4 CPUs re-calibrate udelay(lpj = 2924544)
[    0.770791] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    0.790473] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.796254] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.807673] bounce: pool size: 64 pages
[    0.813060] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.818950] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.824902] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.831368] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
[    0.839212] printk: console [ttyS0] disabled
[    0.843482] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
[    0.852472] printk: console [ttyS0] enabled
[    0.860727] printk: bootconsole [early0] disabled
[    0.873130] spi-mt7621 1e000b00.spi: sys_freq: 220000000
[    0.888384] spi-nor spi0.0: w25q256 (32768 Kbytes)
[    0.893233] 4 fixed-partitions partitions found on MTD device spi0.0
[    0.899573] Creating 4 MTD partitions on "spi0.0":
[    0.904378] 0x000000000000-0x000000030000 : "u-boot"
[    0.910792] 0x000000030000-0x000000040000 : "u-boot-env"
[    0.917503] 0x000000040000-0x000000050000 : "factory"
[    0.923943] 0x000000050000-0x000002000000 : "firmware"
[    0.930840] 2 uimage-fw partitions found on MTD device firmware
[    0.936796] Creating 2 MTD partitions on "firmware":
[    0.941751] 0x000000000000-0x00000026aefe : "kernel"
[    0.948120] 0x00000026aefe-0x000001fb0000 : "rootfs"
[    0.954425] mtd: device 5 (rootfs) set to be root filesystem
[    0.960178] 1 squashfs-split partitions found on MTD device rootfs
[    0.966362] 0x000000eb0000-0x000001fb0000 : "rootfs_data"
[    0.974473] libphy: Fixed MDIO Bus: probed
[    1.047344] libphy: mdio: probed
[    2.452543] ralink_soc_eth 1e100000.ethernet: loaded mt7530 driver
[    2.459638] ralink_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 22
[    2.470738] mt7621-pci 1e140000.pcie: Parsing DT failed
[    2.478702] NET: Registered protocol family 10
[    2.484845] Segment Routing with IPv6
[    2.488604] NET: Registered protocol family 17
[    2.493374] 8021q: 802.1Q VLAN Support v1.8
[    2.501630] gpio-export gpio_export: 1 gpio(s) exported
[    2.507252] rt2880-pinmux pinctrl: pcie is already enabled
[    2.512880] mt7621-pci-phy 1e149000.pcie-phy: PHY for 0xbe149000 (dual port = 1)
[    2.520469] mt7621-pci-phy 1e14a000.pcie-phy: PHY for 0xbe14a000 (dual port = 0)
[    2.627864] mt7621-pci-phy 1e149000.pcie-phy: Xtal is 40MHz
[    2.633428] mt7621-pci-phy 1e14a000.pcie-phy: Xtal is 40MHz
[    2.738916] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK)
[    2.745868] mt7621-pci 1e140000.pcie: PCIE0 enabled
[    2.750722] mt7621-pci 1e140000.pcie: PCIE1 enabled
[    2.755592] mt7621-pci 1e140000.pcie: PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
[    2.765066] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00
[    2.771399] pci_bus 0000:00: root bus resource [io  0x1e160000-0x1e16ffff]
[    2.778262] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[    2.785127] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.790633] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
[    2.796661] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    2.802903] pci 0000:00:00.0: reg 0x14: [mem 0x60400000-0x6040ffff]
[    2.809238] pci 0000:00:00.0: supports D1
[    2.813229] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    2.819353] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
[    2.825397] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    2.831639] pci 0000:00:01.0: reg 0x14: [mem 0x60410000-0x6041ffff]
[    2.837950] pci 0000:00:01.0: supports D1
[    2.841940] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
[    2.849321] pci 0000:01:00.0: [14c3:7662] type 00 class 0x028000
[    2.855392] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[    2.862184] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    2.868975] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    2.876498] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    2.881712] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff]
[    2.887803] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
[    2.894576] pci 0000:00:00.0:   bridge window [mem 0x60100000-0x601fffff pref]
[    2.901770] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    2.908605] pci 0000:02:00.0: [14c3:7603] type 00 class 0x028000
[    2.914654] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
[    2.921030] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    2.928557] pci 0000:00:01.0: PCI bridge to [bus 02-ff]
[    2.933770] pci 0000:00:01.0:   bridge window [io  0x0000-0x0fff]
[    2.939863] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff]
[    2.946640] pci 0000:00:01.0:   bridge window [mem 0x60300000-0x603fffff pref]
[    2.953835] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[    2.960481] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[    2.967083] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[    2.974015] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
[    2.980610] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
[    2.987560] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[    2.994338] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
[    3.001528] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
[    3.008305] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x603fffff pref]
[    3.015510] pci 0000:00:00.0: BAR 1: assigned [mem 0x60400000-0x6040ffff]
[    3.022272] pci 0000:00:01.0: BAR 1: assigned [mem 0x60410000-0x6041ffff]
[    3.029051] pci 0000:00:00.0: BAR 7: assigned [io  0x1e160000-0x1e160fff]
[    3.035824] pci 0000:00:01.0: BAR 7: assigned [io  0x1e161000-0x1e161fff]
[    3.042588] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
[    3.049895] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref]
[    3.057098] pci 0000:00:00.0: PCI bridge to [bus 01]
[    3.062040] pci 0000:00:00.0:   bridge window [io  0x1e160000-0x1e160fff]
[    3.068823] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
[    3.075594] pci 0000:00:00.0:   bridge window [mem 0x60100000-0x601fffff pref]
[    3.082790] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff]
[    3.089566] pci 0000:00:01.0: PCI bridge to [bus 02]
[    3.094522] pci 0000:00:01.0:   bridge window [io  0x1e161000-0x1e161fff]
[    3.101280] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff]
[    3.108053] pci 0000:00:01.0:   bridge window [mem 0x60300000-0x603fffff pref]
[    3.116065] hctosys: unable to open rtc device (rtc0)
[    3.128006] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[    3.140113] Freeing unused kernel memory: 1268K
[    3.144670] This architecture does not have kernel memory protection.
[    3.151079] Run /sbin/init as init process
[    4.009038] ralink_soc_eth 1e100000.ethernet eth0: port 4 link up
[    4.058198] init: Console is alive
[    4.061963] init: - watchdog -
[    4.304459] ralink_soc_eth 1e100000.ethernet eth0: port 3 link up
[    4.604005] ralink_soc_eth 1e100000.ethernet eth0: port 1 link up
[    5.630719] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    5.973622] ralink_soc_eth 1e100000.ethernet eth0: port 1 link down
[    6.019987] usbcore: registered new interface driver usbfs
[    6.025610] usbcore: registered new interface driver hub
[    6.031003] usbcore: registered new device driver usb
[    6.048398] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
[    6.057171] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
[    6.066175] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[    6.071500] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
[    6.084247] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000290010
[    6.093424] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
[    6.100496] hub 1-0:1.0: USB hub found
[    6.104378] hub 1-0:1.0: 2 ports detected
[    6.109011] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[    6.114373] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
[    6.121838] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
[    6.128461] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.137489] hub 2-0:1.0: USB hub found
[    6.141327] hub 2-0:1.0: 1 port detected
[    6.153988] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    6.174524] init: - preinit -
[    8.062148] ralink_soc_eth 1e100000.ethernet: PPE started
[    8.649954] random: jshn: uninitialized urandom read (4 bytes read)
[    8.658366] ralink_soc_eth 1e100000.ethernet eth0: port 1 link up
[    8.732008] random: jshn: uninitialized urandom read (4 bytes read)
[    8.920791] random: jshn: uninitialized urandom read (4 bytes read)
[    9.001924] random: crng init done
[    9.005338] random: 1 urandom warning(s) missed due to ratelimiting
[   10.016196] ralink_soc_eth 1e100000.ethernet eth0: port 1 link down
[   12.651732] ralink_soc_eth 1e100000.ethernet eth0: port 1 link up
[   13.992153] ralink_soc_eth 1e100000.ethernet eth0: port 1 link down
[   15.587326] mount_root: loading kmods from internal overlay
[   15.621252] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[   15.632562] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[   16.103422] ralink_soc_eth 1e100000.ethernet eth0: port 1 link up
[   16.206672] jffs2: notice: (582) jffs2_build_xattr_subsystem: complete building xattr subsystem, 30 of xdatum (29 unchecked, 1 orphan) and 42 of xref (2 dead, 0 orphan) found.
[   16.223326] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   16.235291] block: extroot: not configured
[   16.300341] jffs2: notice: (580) jffs2_build_xattr_subsystem: complete building xattr subsystem, 30 of xdatum (29 unchecked, 1 orphan) and 42 of xref (2 dead, 0 orphan) found.
[   16.430014] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   16.440444] block: extroot: not configured
[   16.446242] mount_root: switching to jffs2 overlay
[   16.453911] overlayfs: upper fs does not support tmpfile.
[   16.466073] urandom-seed: Seeding with /etc/urandom.seed
[   16.595331] register mt7603_drv
[   16.598604] mt7621-pci 1e140000.pcie: bus=2 slot=1 irq=25
[   16.604003] pci 0000:00:01.0: enabling device (0006 -> 0007)
[   16.609672] mt7603_drv 0000:02:00.0: enabling device (0000 -> 0002)
[   16.622212] 
[   16.622212] 
[   16.622212] === pAd = 5854e558, size = 1648296 ===
[   16.622212] 
[   16.631885] <-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x
[   16.638556] <-- RTMPAllocAdapterBlock, Status=0
[   16.643073] pAd->CSRBaseAddress =0xc0900000, csr_addr=0xc0900000!
[   16.649163] device_id =0x7603
[   16.652123] MT7603 AP Driver version 4.1.2.0
[   16.656382] mt7603_init()-->
[   16.659252] mt_bcn_buf_init(224): Not support for HIF_MT yet!
[   16.664981] <--mt7603_init()
[   16.667850] load_dev_l1profile()-->
[   16.778274] match_index_by_chipname() MT7603 found as INDEX0
[   16.783961] l1set_profile_path() profile update from /etc/Wireless/RT2860/RT2860AP.dat to /etc/wireless/mt7615/mt7615.1.dat
[   16.795098] l1set_eeprom_offset() eeprom offset remain 0x0
[   16.800570] l1set_eeprom_size() eeprom size update from 0x200 to 0x400
[   16.807092] l1set_ifname() ifname rename from ra0 to ra
[   16.812288] l1set_ifname() ifname remain ra
[   16.816480] l1set_ifname() ifname remain ra
[   16.820658] l1set_ifname() ifname remain apcli
[   16.902757] register rtpci
[   16.905674] mt7621-pci 1e140000.pcie: bus=1 slot=0 irq=24
[   16.911073] pci 0000:00:00.0: enabling device (0006 -> 0007)
[   16.916739] rtpci 0000:01:00.0: enabling device (0000 -> 0002)
[   16.927802] 
[   16.927802] 
[   16.927802] === pAd = 240cd4fb, size = 1403632 ===
[   16.927802] 
[   16.937516] <-- RTMPAllocTxRxRingMemory, Status=0
[   16.943007] <-- RTMPAllocAdapterBlock, Status=0
[   16.947600] pAd->CSRBaseAddress =0xc0d00000, csr_addr=0xc0d00000!
[   16.953676] device_id =0x7662
[   16.956668] ==>rlt_wlan_chip_onoff(): OnOff:1, Reset= 1, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0x20a
[   16.966286] MT76x2 AP Driver version: 3.0.5.0
[   16.970649] ====> mt76x2_ePA_per_rate_compensate_init: 5944 is_ePA: 1
[   16.977078] RtmpChipOpsEepromHook::e2p_type=0, inf_Type=5
[   16.982447] RtmpEepromGetDefault::e2p_default=2
[   16.986968] NVM is FLASH mode
[   16.989922] get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=rai
[   16.997667] WiFi PCI Startup Time: 0.090s
[   17.031500] ralink_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
[   17.123325] procd: - early -
[   17.126618] procd: - watchdog -
[   18.064315] procd: - watchdog -
[   18.069209] procd: - ubus -
[   18.259147] procd: - init -
[   19.140359] kmodloader: loading kernel modules from /etc/modules.d/*
[   19.168698] NET: Registered protocol family 38
[   19.251543] cryptodev: driver 1.12 loaded.
[   19.270936] mtk-eip93 1e004000.crypto: PRNG initialized
[   19.281195] mtk-eip93 1e004000.crypto: EIP93 initialized succesfull
[   19.329254] xt_time: kernel timezone is -0000
[   19.385803] PPP generic driver version 2.4.2
[   19.392224] PPP MPPE Compression module registered
[   19.398593] NET: Registered protocol family 24
[   19.419629] kmodloader: done loading kernel modules from /etc/modules.d/*
[   28.280087] ralink_soc_eth 1e100000.ethernet: PPE started
[   28.285609] debugfs: Directory 'mtk_ppe' with parent '/' already present!
[   28.301341] br-lan: port 1(eth0.1) entered blocking state
[   28.306998] br-lan: port 1(eth0.1) entered disabled state
[   28.313234] device eth0.1 entered promiscuous mode
[   28.318131] device eth0 entered promiscuous mode
[   28.328803] br-lan: port 1(eth0.1) entered blocking state
[   28.334258] br-lan: port 1(eth0.1) entered forwarding state
[   29.411601] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   51.755816] load_dev_l1profile()-->
[   51.759451] l1set_profile_path() profile remain /etc/wireless/mt7615/mt7615.1.dat
[   51.767144] l1set_eeprom_offset() eeprom offset remain 0x0
[   51.772637] l1set_eeprom_size() eeprom size remain 0x400
[   51.778012] l1set_ifname() ifname rename from ra0 to ra
[   51.783244] l1set_ifname() ifname remain ra
[   51.787587] l1set_ifname() ifname remain ra
[   51.791787] l1set_ifname() ifname remain apcli
[   51.797111] TX_BCN DESC f3fb1c23 size = 320
[   51.801536] RX[0] DESC ad176897 size = 2048
[   51.806392] RX[1] DESC bb534e1a size = 2048
[   51.816445] E2pAccessMode=2
[   51.820079] cfg_mode=9
[   51.822423] cfg_mode=9
[   51.825040] wmode_band_equal(): Band Equal!
[   51.832589] APSDCapable[0]=1
[   51.835501] APSDCapable[1]=1
[   51.838374] APSDCapable[2]=1
[   51.841239] APSDCapable[3]=1
[   51.844146] APSDCapable[4]=1
[   51.847015] APSDCapable[5]=1
[   51.849877] APSDCapable[6]=1
[   51.852737] APSDCapable[7]=1
[   51.855634] APSDCapable[8]=1
[   51.858504] APSDCapable[9]=1
[   51.861366] APSDCapable[10]=1
[   51.864353] APSDCapable[11]=1
[   51.867309] APSDCapable[12]=1
[   51.870257] APSDCapable[13]=1
[   51.873205] APSDCapable[14]=1
[   51.876201] APSDCapable[15]=1
[   51.879158] default ApCliAPSDCapable[0]=1
[   51.883148] default ApCliAPSDCapable[1]=1
[   52.004707] Key1Str is Invalid key length(0) or Type(0)
[   52.010214] Key2Str is Invalid key length(0) or Type(0)
[   52.015920] Key3Str is Invalid key length(0) or Type(0)
[   52.021437] Key4Str is Invalid key length(0) or Type(0)
[   52.060461] [PMF]Set_PMFMFPC_Proc:: apidx=0, Desired MFPC=1
[   52.066248] [PMF]Set_PMFMFPR_Proc:: apidx=0, Desired MFPR=0
[   52.072008] [PMF]Set_PMFSHA256_Proc:: apidx=0, Desired PMFSHA256=0
[   52.079353] FW Version:
[   52.079363] C
[   52.081805] L
[   52.083368] 1
[   52.085036] 7
[   52.086688] 3
[   52.088296] 7
[   52.089884] 6
[   52.091465] 6
[   52.093100] _
[   52.094741] R
[   52.096343] 
[   52.099411] FW Build Date:
[   52.099419] 2
[   52.102197] 0
[   52.103830] 1
[   52.105508] 7
[   52.107103] 1
[   52.108691] 1
[   52.110317] 1
[   52.111932] 0
[   52.113532] 1
[   52.115203] 0
[   52.116832] 5
[   52.118473] 9
[   52.120111] 3
[   52.121691] 2
[   52.123323] 
[   52.124968] 
[   52.128520] CmdAddressLenReq:(ret = 0)
[   52.133639] CmdFwStartReq: override = 1, address = 1048576
[   52.139368] CmdStartDLRsp: WiFI FW Download Success
[   52.159011] AsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC)
[   52.165010] efuse_probe: efuse = 10000002
[   52.169129] RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5
[   52.174628] RtmpEepromGetDefault::e2p_dafault=1
[   52.179182] RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1
[   52.186819] NVM is FLASH mode, flash_offset = 0x0
[   52.191584] 1. Phy Mode = 14
[   52.194960] @@@  NICReadEEPROMParameters : pAd->FWLoad=0 
[   52.355716] Country Region from e2p = ffff
[   52.359995] tssi_1_target_pwr_g_band = 46
[   52.364216] 2. Phy Mode = 14
[   52.367259] 3. Phy Mode = 14
[   52.370157] NICInitPwrPinCfg(14): Not support for HIF_MT yet!
[   52.376008] NICInitializeAsic(588): Not support rtmp_mac_sys_reset () for HIF_MT yet!
[   52.383805] mt_mac_init()-->
[   52.386701] mt7603_init_mac_cr()-->
[   52.390825] AsicSetMacMaxLen(1907): Set the Max RxPktLen=1024!
[   52.396664] <--mt_mac_init()
[   52.399675] 	WTBL Segment 1 info:
[   52.402968] 		MemBaseAddr/FID:0x28000/0
[   52.406806] 		EntrySize/Cnt:32/128
[   52.410187] 	WTBL Segment 2 info:
[   52.413480] 		MemBaseAddr/FID:0x40000/0
[   52.417315] 		EntrySize/Cnt:64/128
[   52.420695] 	WTBL Segment 3 info:
[   52.423988] 		MemBaseAddr/FID:0x42000/64
[   52.427913] 		EntrySize/Cnt:64/128
[   52.431294] 	WTBL Segment 4 info:
[   52.434610] 		MemBaseAddr/FID:0x44000/128
[   52.438595] 		EntrySize/Cnt:32/128
[   52.442070] AntCfgInit(2689): Not support for HIF_MT yet!
[   52.447630] MCS Set = ff ff 00 00 01
[   54.342565] SYNC - BBP R4 to 20MHz.l
[   56.832083] SYNC - BBP R4 to 20MHz.l
[   59.331553] SYNC - BBP R4 to 20MHz.l
[   59.935090] SYNC - BBP R4 to 20MHz.l
[   60.535050] SYNC - BBP R4 to 20MHz.l
[   61.135049] SYNC - BBP R4 to 20MHz.l
[   61.735045] SYNC - BBP R4 to 20MHz.l
[   62.335063] SYNC - BBP R4 to 20MHz.l
[   62.935050] SYNC - BBP R4 to 20MHz.l
[   63.535067] SYNC - BBP R4 to 20MHz.l
[   64.135056] SYNC - BBP R4 to 20MHz.l
[   64.734154] [PMF]ap_pmf_init:: Security is not WPA2/WPA2PSK AES
[   64.740070] [PMF]ap_pmf_init:: apidx=0, MFPC=0, MFPR=0, SHA256=0
[   64.857977] [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
[   64.864293] AsicSetRalinkBurstMode(4325): Not support for HIF_MT yet!
[   64.870702] RTMPSetPiggyBack(943): Not support for HIF_MT yet!
[   64.882796] AsicSetTxPreamble(4312): Not support for HIF_MT yet!
[   64.891100] The 4-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 4
[   64.898779] AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xa0
[   64.904720] Main bssid = 20:76:93:56:8e:42
[   64.908891] <==== rt28xx_init, Status=0
[   64.916548] @@@ ed_monitor_exit : ===>
[   64.920380] @@@ ed_monitor_exit : <===
[   64.924221] mt7603_set_ed_cca: TURN OFF EDCCA  mac 0x10618 = 0x8564267c, EDCCA_Status=0
[   64.932219] WiFi Startup Cost (ra0): 13.170s
[   64.938134] The 4-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 4
[   64.945800] MTPciPollTxRxEmpty
[   65.617136] AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0x0
[   65.622962] RTMPSetPiggyBack(943): Not support for HIF_MT yet!
[   65.634303] RT28xxPciAsicRadioOff(): Not support for HIF_MT yet!
[   65.640289] RTMPDrvClose call RT28xxPciAsicRadioOff fail !!
[   65.645926] tx_kickout_fail_count = 0
[   65.649571] tx_timeout_fail_count = 0
[   65.653208] rx_receive_fail_count = 0
[   65.656874] alloc_cmd_msg = 81
[   65.659910] free_cmd_msg = 81
[   65.675476] load_dev_l1profile()-->
[   65.679708] l1set_profile_path() profile remain /etc/wireless/mt7615/mt7615.1.dat
[   65.687486] l1set_eeprom_offset() eeprom offset remain 0x0
[   65.693116] l1set_eeprom_size() eeprom size remain 0x400
[   65.698623] l1set_ifname() ifname rename from ra0 to ra
[   65.703916] l1set_ifname() ifname remain ra
[   65.708305] l1set_ifname() ifname remain ra
[   65.712654] l1set_ifname() ifname remain apcli
[   65.718244] TX_BCN DESC f3fb1c23 size = 320
[   65.722722] RX[0] DESC ad176897 size = 2048
[   65.727815] RX[1] DESC bb534e1a size = 2048
[   65.740210] E2pAccessMode=2
[   65.743874] cfg_mode=9
[   65.746282] cfg_mode=9
[   65.748650] wmode_band_equal(): Band Equal!
[   65.756420] APSDCapable[0]=1
[   65.759302] APSDCapable[1]=1
[   65.762170] APSDCapable[2]=1
[   65.765072] APSDCapable[3]=1
[   65.767947] APSDCapable[4]=1
[   65.770811] APSDCapable[5]=1
[   65.773676] APSDCapable[6]=1
[   65.776559] APSDCapable[7]=1
[   65.779426] APSDCapable[8]=1
[   65.782293] APSDCapable[9]=1
[   65.785189] APSDCapable[10]=1
[   65.788149] APSDCapable[11]=1
[   65.791102] APSDCapable[12]=1
[   65.794116] APSDCapable[13]=1
[   65.797079] APSDCapable[14]=1
[   65.800030] APSDCapable[15]=1
[   65.802983] default ApCliAPSDCapable[0]=1
[   65.806987] default ApCliAPSDCapable[1]=1
[   65.932516] Key1Str is Invalid key length(0) or Type(0)
[   65.938136] Key2Str is Invalid key length(0) or Type(0)
[   65.943727] Key3Str is Invalid key length(0) or Type(0)
[   65.949273] Key4Str is Invalid key length(0) or Type(0)
[   66.003006] [PMF]Set_PMFMFPC_Proc:: apidx=0, Desired MFPC=1
[   66.008921] [PMF]Set_PMFMFPR_Proc:: apidx=0, Desired MFPR=0
[   66.014787] [PMF]Set_PMFSHA256_Proc:: apidx=0, Desired PMFSHA256=0
[   66.022017] FW Version:
[   66.022028] C
[   66.024519] L
[   66.026101] 1
[   66.027669] 7
[   66.029265] 3
[   66.030865] 7
[   66.032471] 6
[   66.034134] 6
[   66.035772] _
[   66.037390] R
[   66.038994] 
[   66.042093] FW Build Date:
[   66.042105] 2
[   66.044864] 0
[   66.046481] 1
[   66.048096] 7
[   66.049684] 1
[   66.051253] 1
[   66.052823] 1
[   66.054438] 0
[   66.056022] 1
[   66.057629] 0
[   66.059249] 5
[   66.060836] 9
[   66.062444] 3
[   66.064098] 2
[   66.065681] 
[   66.067250] 
[   66.070328] AsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC)
[   66.076178] efuse_probe: efuse = 10000002
[   66.080173] RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5
[   66.085608] RtmpEepromGetDefault::e2p_dafault=1
[   66.090164] RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1
[   66.097772] NVM is FLASH mode, flash_offset = 0x0
[   66.102529] 1. Phy Mode = 14
[   66.106373] @@@  NICReadEEPROMParameters : pAd->FWLoad=1 
[   66.111820] Country Region from e2p = ffff
[   66.116060] tssi_1_target_pwr_g_band = 46
[   66.120123] 2. Phy Mode = 14
[   66.123171] 3. Phy Mode = 14
[   66.126254] NICInitPwrPinCfg(14): Not support for HIF_MT yet!
[   66.132037] NICInitializeAsic(588): Not support rtmp_mac_sys_reset () for HIF_MT yet!
[   66.139894] mt_mac_init()-->
[   66.142808] mt7603_init_mac_cr()-->
[   66.147902] AsicSetMacMaxLen(1907): Set the Max RxPktLen=1024!
[   66.153766] <--mt_mac_init()
[   66.156912] 	WTBL Segment 1 info:
[   66.160222] 		MemBaseAddr/FID:0x28000/0
[   66.164139] 		EntrySize/Cnt:32/128
[   66.167543] 	WTBL Segment 2 info:
[   66.170841] 		MemBaseAddr/FID:0x40000/0
[   66.174684] 		EntrySize/Cnt:64/128
[   66.178071] 	WTBL Segment 3 info:
[   66.181370] 		MemBaseAddr/FID:0x42000/64
[   66.185533] 		EntrySize/Cnt:64/128
[   66.188940] 	WTBL Segment 4 info:
[   66.192242] 		MemBaseAddr/FID:0x44000/128
[   66.196288] 		EntrySize/Cnt:32/128
[   66.199750] AntCfgInit(2689): Not support for HIF_MT yet!
[   66.205343] MCS Set = ff ff 00 00 01
[   66.210094] SYNC - BBP R4 to 20MHz.l
[   66.805057] SYNC - BBP R4 to 20MHz.l
[   67.405027] SYNC - BBP R4 to 20MHz.l
[   68.005044] SYNC - BBP R4 to 20MHz.l
[   68.605245] SYNC - BBP R4 to 20MHz.l
[   69.205224] SYNC - BBP R4 to 20MHz.l
[   69.805321] SYNC - BBP R4 to 20MHz.l
[   70.405158] SYNC - BBP R4 to 20MHz.l
[   71.005209] SYNC - BBP R4 to 20MHz.l
[   71.605171] SYNC - BBP R4 to 20MHz.l
[   72.205142] SYNC - BBP R4 to 20MHz.l
[   72.804197] [PMF]ap_pmf_init:: Security is not WPA2/WPA2PSK AES
[   72.810118] [PMF]ap_pmf_init:: apidx=0, MFPC=0, MFPR=0, SHA256=0
[   72.936883] [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
[   72.943206] AsicSetRalinkBurstMode(4325): Not support for HIF_MT yet!
[   72.949681] RTMPSetPiggyBack(943): Not support for HIF_MT yet!
[   72.962143] AsicSetTxPreamble(4312): Not support for HIF_MT yet!
[   72.970655] The 4-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 4
[   72.978273] AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xa0
[   72.984199] Main bssid = 20:76:93:56:8e:42
[   72.988388] <==== rt28xx_init, Status=0
[   72.992283] @@@ ed_monitor_exit : ===>
[   72.996042] @@@ ed_monitor_exit : <===
[   72.999801] mt7603_set_ed_cca: TURN OFF EDCCA  mac 0x10618 = 0x8564267c, EDCCA_Status=0
[   73.007852] WiFi Startup Cost (ra0): 7.330s
[   73.012030] [PMF]ApCli_Open:: MFPC=0, MFPR=0, SHA256=0
[   73.020453] MTPciPollTxRxEmpty
[   73.680555] AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0x0
[   73.686425] RTMPSetPiggyBack(943): Not support for HIF_MT yet!
[   73.698393] RT28xxPciAsicRadioOff(): Not support for HIF_MT yet!
[   73.704476] RTMPDrvClose call RT28xxPciAsicRadioOff fail !!
[   73.710073] tx_kickout_fail_count = 0
[   73.713714] tx_timeout_fail_count = 0
[   73.717384] rx_receive_fail_count = 0
[   73.721030] alloc_cmd_msg = 55
[   73.724090] free_cmd_msg = 55
[   73.995226] build time = 
[   73.995239] 2
[   73.997873] 0
[   73.999445] 1
[   74.001020] 4
[   74.002600] 1
[   74.004273] 1
[   74.005886] 1
[   74.007497] 5
[   74.009080] 0
[   74.010701] 6
[   74.012320] 0
[   74.013916] 6
[   74.015574] 0
[   74.017182] 6
[   74.018769] a
[   74.020372] 
[   74.023460] 
[   74.025002] rom patch for E3 IC
[   74.028158] 
[   74.029656] platform = 
[   74.029663] A
[   74.032127] L
[   74.033722] P
[   74.035370] S
[   74.036958] 
[   74.040037] hw/sw version = 
[   74.040047] 8a
[   74.042927] 10
[   74.044643] 8a
[   74.046316] 10
[   74.047977] 
[   74.051119] patch version = 
[   74.051124] 0
[   74.053999] 0
[   74.055635] 0
[   74.057222] 10
[   74.058796] 
[   74.074148] FW Version:0.0.00 
[   74.074160] Build:1
[   74.079309] Build Time:
[   74.079315] 2
[   74.081757] 0
[   74.083331] 1
[   74.084937] 6
[   74.086524] 0
[   74.088099] 7
[   74.089673] 1
[   74.091248] 1
[   74.092823] 1
[   74.094425] 4
[   74.096006] 4
[   74.097588] 3
[   74.099173] _
[   74.100762] _
[   74.102352] _
[   74.103928] _
[   74.105553] 
[   74.108647] fw for E3 IC
[   74.128832] RX[0] DESC 14c46db2 size = 4096
[   74.134445] RX[1] DESC ed045ab1 size = 512
[   74.141483] E2pAccessMode=2
[   74.145111] cfg_mode=14
[   74.147566] cfg_mode=14
[   74.150028] wmode_band_equal(): Band Not Equal!
[   74.281309] Key1Str is Invalid key length(0) or Type(0)
[   74.286980] Key2Str is Invalid key length(0) or Type(0)
[   74.292439] Key3Str is Invalid key length(0) or Type(0)
[   74.297952] Key4Str is Invalid key length(0) or Type(0)
[   74.315030] 1. Phy Mode = 49
[   74.318224] Initialize MAC Address from E2PROM 
[   74.322746] E2PROM MAC: 20:76:93:56:8e:44
[   74.326796] Use the MAC address what is assigned from EEPROM. 
[   74.332615] Current MAC: 20:76:93:56:8e:44
[   74.336784] get_chl_grp:illegal channel (167)
[   74.341132] get_chl_grp:illegal channel (167)
[   74.345498] get_chl_grp:illegal channel (169)
[   74.349847] get_chl_grp:illegal channel (169)
[   74.354215] get_chl_grp:illegal channel (171)
[   74.358554] get_chl_grp:illegal channel (171)
[   74.362892] get_chl_grp:illegal channel (173)
[   74.367265] get_chl_grp:illegal channel (173)
[   74.371611] Country Region from e2p = ffff
[   74.375746] mt76x2_read_temp_info_from_eeprom:: is_temp_tx_alc=0, temp_tx_alc_enable=0
[   74.383635] mt76x2_read_tx_alc_info_from_eeprom:: is_ePA_mode=1, ePA_type=1
[   74.390631] mt76x2_read_tx_alc_info_from_eeprom:: [5G band] high_temp_slope=15, low_temp_slope=9
[   74.399411] mt76x2_read_tx_alc_info_from_eeprom:: [2G band] high_temp_slope=0, low_temp_slope=0
[   74.408112] mt76x2_read_tx_alc_info_from_eeprom:: [5G band] tc_lower_bound=-7, tc_upper_bound=4
[   74.416803] mt76x2_read_tx_alc_info_from_eeprom:: [2G band] tc_lower_bound=0, tc_upper_bound=0
[   74.425437] mt76x2_get_external_lna_gain::LNA type=0x1, BLNAGain=0xffffff8c, ALNAGain0=0xffffff8f, ALNAGain1=0xffffff8f, ALNAGain2=0xffffff8f
[   74.438110] 2. Phy Mode = 49
[   74.441009] 3. Phy Mode = 49
[   74.443902] andes_pci_fw_init
[   74.446955] 0x1300 = 00073200
[   74.476271] AntCfgInit: primary/secondary ant 0/1
[   74.480968] andes_load_cr:cr_type(2)
[   74.495101] MCS Set = ff ff 00 00 01
[   78.504231]  ch36 bssid=dc:4b:dd:1d:51:f3
[   78.508270]  ch44 bssid=a4:c7:4b:5e:1b:60
[   78.512282]  ch165 bssid=80:22:78:a7:b1:df
[   78.516447] =====================================================
[   78.522547] Channel 36 : Dirty = 70, False CCA = 1, Busy Time = 0, Skip Channel = FALSE
[   78.530580] Channel 40 : Dirty = 64, False CCA = 4, Busy Time = 0, Skip Channel = FALSE
[   78.538637] Channel 44 : Dirty = 80, False CCA = 8, Busy Time = 0, Skip Channel = FALSE
[   78.546688] Channel 48 : Dirty = 32, False CCA = 45, Busy Time = 0, Skip Channel = FALSE
[   78.554812] Channel 149 : Dirty = 0, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
[   78.562800] Channel 153 : Dirty = 0, False CCA = 4, Busy Time = 0, Skip Channel = FALSE
[   78.570846] Channel 157 : Dirty = 0, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
[   78.578889] Channel 161 : Dirty = 32, False CCA = 2, Busy Time = 0, Skip Channel = FALSE
[   78.586982] Channel 165 : Dirty = 90, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
[   78.595055] =====================================================
[   78.601189] Rule 1 CCA value : Min Dirtiness (Include extension channel) ==> Select Channel 149 
[   78.609979] Min Dirty = 32
[   78.612681] ExChannel = 0 , 0
[   78.615656] BW        = 80
[   78.738717] mt76x2_bbp_adjust():rf_bw=2, ext_ch=1, PrimCh=149, HT-CentCh=151, VHT-CentCh=155
[   78.795116] APStartUp(): AP Set CentralFreq at 155(Prim=149, HT-CentCh=151, VHT-CentCh=155, BBP_BW=2)
[   78.817232] mt76x2_calibration(channel = 155)
[   79.195438] Main bssid = 20:76:93:56:8e:44
[   79.199544] mt76x2_reinit_agc_gain:original agc_vga0 = 0x42, agc_vga1 = 0x42
[   79.206596] mt76x2_reinit_agc_gain:updated agc_vga0 = 0x42, agc_vga1 = 0x42
[   79.213534] mt76x2_reinit_hi_lna_gain:original hi_lna0 = 0x36, hi_lna1 = 0x36
[   79.220671] mt76x2_reinit_hi_lna_gain:updated hi_lna0 = 0x36, hi_lna1 = 0x36
[   79.227735] original vga value(chain0) = 42
[   79.231906] original vga value(chain1) = 42
[   79.236120] <==== rt28xx_init, Status=0
[   79.239954] get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=wdsi
[   79.248119] get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=wdsi
[   79.256793] get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=wdsi
[   79.265311] get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=wdsi
[   79.273632] get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=apclii
[   79.282205] RTMPDrvOpen(1):Check if PDMA is idle!
[   79.287104] RTMPDrvOpen(2):Check if PDMA is idle!
[   79.291898] WiFi Interface Up Time (rai0): 5.290s
[   79.360947] andes_pci_erasefw
[   79.392930] ==>rlt_wlan_chip_onoff(): OnOff:0, Reset= 0, pAd->WlanFunCtrl:0x20b, Reg-WlanFunCtrl=0x20b
[   79.407905] WiFi Interface Down Time (rai0): 0.100s
[   79.442982] ==>rlt_wlan_chip_onoff(): OnOff:1, Reset= 0, pAd->WlanFunCtrl:0x208, Reg-WlanFunCtrl=0x209
[   79.452510] build time = 
[   79.452530] 2
[   79.455382] 0
[   79.457026] 1
[   79.458653] 4
[   79.460285] 1
[   79.461899] 1
[   79.463493] 1
[   79.465169] 5
[   79.466836] 0
[   79.468474] 6
[   79.470105] 0
[   79.471716] 6
[   79.473329] 0
[   79.475032] 6
[   79.476694] a
[   79.478343] 
[   79.481456] 
[   79.482963] rom patch for E3 IC
[   79.486185] 
[   79.487754] platform = 
[   79.487765] A
[   79.490265] L
[   79.491898] P
[   79.493542] S
[   79.495272] 
[   79.498469] hw/sw version = 
[   79.498495] 8a
[   79.501454] 10
[   79.503159] 8a
[   79.504974] 10
[   79.506673] 
[   79.509927] patch version = 
[   79.509952] 0
[   79.512888] 0
[   79.514575] 0
[   79.516215] 10
[   79.517836] 
[   79.522746] FW Version:0.0.00 
[   79.522756] Build:1
[   79.528051] Build Time:
[   79.528070] 2
[   79.530555] 0
[   79.532209] 1
[   79.533854] 6
[   79.535600] 0
[   79.537255] 7
[   79.538917] 1
[   79.540579] 1
[   79.542216] 1
[   79.543826] 4
[   79.545510] 4
[   79.547158] 3
[   79.548781] _
[   79.550404] _
[   79.552036] _
[   79.553657] _
[   79.555333] 
[   79.558467] fw for E3 IC
[   79.583922] RX[0] DESC 14c46db2 size = 4096
[   79.589982] RX[1] DESC ed045ab1 size = 512
[   79.599214] E2pAccessMode=2
[   79.603172] cfg_mode=14
[   79.605825] cfg_mode=14
[   79.608355] wmode_band_equal(): Band Not Equal!
[   79.821344] Key1Str is Invalid key length(0) or Type(0)
[   79.827127] Key2Str is Invalid key length(0) or Type(0)
[   79.832853] Key3Str is Invalid key length(0) or Type(0)
[   79.838701] Key4Str is Invalid key length(0) or Type(0)
[   79.862275] 1. Phy Mode = 49
[   79.866671] Initialize MAC Address from E2PROM 
[   79.871334] E2PROM MAC: 20:76:93:56:8e:44
[   79.875446] Use the MAC address what is assigned from EEPROM. 
[   79.881328] Current MAC: 20:76:93:56:8e:44
[   79.885679] get_chl_grp:illegal channel (167)
[   79.890110] get_chl_grp:illegal channel (167)
[   79.894594] get_chl_grp:illegal channel (169)
[   79.899000] get_chl_grp:illegal channel (169)
[   79.903404] get_chl_grp:illegal channel (171)
[   79.907918] get_chl_grp:illegal channel (171)
[   79.912354] get_chl_grp:illegal channel (173)
[   79.916922] get_chl_grp:illegal channel (173)
[   79.921355] Country Region from e2p = ffff
[   79.925560] mt76x2_read_temp_info_from_eeprom:: is_temp_tx_alc=0, temp_tx_alc_enable=0
[   79.933567] mt76x2_read_tx_alc_info_from_eeprom:: is_ePA_mode=1, ePA_type=1
[   79.940683] mt76x2_read_tx_alc_info_from_eeprom:: [5G band] high_temp_slope=15, low_temp_slope=9
[   79.949614] mt76x2_read_tx_alc_info_from_eeprom:: [2G band] high_temp_slope=0, low_temp_slope=0
[   79.958463] mt76x2_read_tx_alc_info_from_eeprom:: [5G band] tc_lower_bound=-7, tc_upper_bound=4
[   79.967366] mt76x2_read_tx_alc_info_from_eeprom:: [2G band] tc_lower_bound=0, tc_upper_bound=0
[   79.976086] mt76x2_get_external_lna_gain::LNA type=0x1, BLNAGain=0xffffff8c, ALNAGain0=0xffffff8f, ALNAGain1=0xffffff8f, ALNAGain2=0xffffff8f
[   79.988856] 2. Phy Mode = 49
[   79.991830] 3. Phy Mode = 49
[   79.994793] andes_pci_fw_init
[   79.997923] 0x1300 = 00064320
[   80.037582] AntCfgInit: primary/secondary ant 0/1
[   80.042369] andes_load_cr:cr_type(2)
[   80.061223] MCS Set = ff ff 00 00 01
[   84.324250]  ch36 bssid=dc:4b:dd:1d:51:f3
[   84.328307]  ch44 bssid=a4:c7:4b:5e:1b:60
[   84.332395]  ch165 bssid=80:22:78:a7:b1:df
[   84.336611] =====================================================
[   84.342738] Channel 36 : Dirty = 70, False CCA = 5, Busy Time = 0, Skip Channel = FALSE
[   84.350857] Channel 40 : Dirty = 64, False CCA = 27, Busy Time = 0, Skip Channel = FALSE
[   84.358985] Channel 44 : Dirty = 80, False CCA = 6, Busy Time = 0, Skip Channel = FALSE
[   84.367025] Channel 48 : Dirty = 32, False CCA = 43, Busy Time = 0, Skip Channel = FALSE
[   84.375309] Channel 149 : Dirty = 0, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
[   84.383313] Channel 153 : Dirty = 0, False CCA = 1, Busy Time = 0, Skip Channel = FALSE
[   84.391368] Channel 157 : Dirty = 0, False CCA = 2, Busy Time = 0, Skip Channel = FALSE
[   84.399483] Channel 161 : Dirty = 32, False CCA = 1, Busy Time = 0, Skip Channel = FALSE
[   84.407597] Channel 165 : Dirty = 90, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
[   84.415702] =====================================================
[   84.421958] Rule 1 CCA value : Min Dirtiness (Include extension channel) ==> Select Channel 149 
[   84.430787] Min Dirty = 32
[   84.433507] ExChannel = 0 , 0
[   84.436527] BW        = 80
[   84.587273] mt76x2_bbp_adjust():rf_bw=2, ext_ch=1, PrimCh=149, HT-CentCh=151, VHT-CentCh=155
[   84.658096] APStartUp(): AP Set CentralFreq at 155(Prim=149, HT-CentCh=151, VHT-CentCh=155, BBP_BW=2)
[   84.684595] mt76x2_calibration(channel = 155)
[   85.063320] Main bssid = 20:76:93:56:8e:44
[   85.067461] mt76x2_reinit_agc_gain:original agc_vga0 = 0x42, agc_vga1 = 0x42
[   85.074496] mt76x2_reinit_agc_gain:updated agc_vga0 = 0x42, agc_vga1 = 0x42
[   85.081426] mt76x2_reinit_hi_lna_gain:original hi_lna0 = 0x36, hi_lna1 = 0x36
[   85.088606] mt76x2_reinit_hi_lna_gain:updated hi_lna0 = 0x36, hi_lna1 = 0x36
[   85.095664] original vga value(chain0) = 42
[   85.099828] original vga value(chain1) = 42
[   85.104007] <==== rt28xx_init, Status=0
[   85.107905] RTMPDrvOpen(1):Check if PDMA is idle!
[   85.112597] RTMPDrvOpen(2):Check if PDMA is idle!
[   85.117350] WiFi Interface Up Time (rai0): 5.680s
[   85.283013] andes_pci_erasefw
[   85.306250] ==>rlt_wlan_chip_onoff(): OnOff:0, Reset= 0, pAd->WlanFunCtrl:0x20b, Reg-WlanFunCtrl=0x20b
[   85.319024] WiFi Interface Down Time (rai0): 0.070s
[   85.605453] br-lan: port 2(ra0) entered blocking state
[   85.610599] br-lan: port 2(ra0) entered disabled state
[   85.616479] device ra0 entered promiscuous mode
[   85.640475] load_dev_l1profile()-->
[   85.644274] l1set_profile_path() profile remain /etc/wireless/mt7615/mt7615.1.dat
[   85.651802] l1set_eeprom_offset() eeprom offset remain 0x0
[   85.657434] l1set_eeprom_size() eeprom size remain 0x400
[   85.662816] l1set_ifname() ifname rename from ra0 to ra
[   85.668103] l1set_ifname() ifname remain ra
[   85.672336] l1set_ifname() ifname remain ra
[   85.676573] l1set_ifname() ifname remain apcli
[   85.681849] TX_BCN DESC f3fb1c23 size = 320
[   85.686300] RX[0] DESC ad176897 size = 2048
[   85.690980] RX[1] DESC bb534e1a size = 2048
[   85.704233] E2pAccessMode=2
[   85.708289] cfg_mode=9
[   85.710691] cfg_mode=9
[   85.713087] wmode_band_equal(): Band Equal!
[   85.720857] APSDCapable[0]=1
[   85.723743] APSDCapable[1]=1
[   85.726728] APSDCapable[2]=1
[   85.729678] APSDCapable[3]=1
[   85.732570] APSDCapable[4]=1
[   85.735575] APSDCapable[5]=1
[   85.738508] APSDCapable[6]=1
[   85.741400] APSDCapable[7]=1
[   85.744322] APSDCapable[8]=1
[   85.747255] APSDCapable[9]=1
[   85.750175] APSDCapable[10]=1
[   85.753142] APSDCapable[11]=1
[   85.756126] APSDCapable[12]=1
[   85.759079] APSDCapable[13]=1
[   85.762033] APSDCapable[14]=1
[   85.765028] APSDCapable[15]=1
[   85.767995] default ApCliAPSDCapable[0]=1
[   85.771986] default ApCliAPSDCapable[1]=1
[   85.896629] Key1Str is Invalid key length(0) or Type(0)
[   85.902295] Key2Str is Invalid key length(0) or Type(0)
[   85.907879] Key3Str is Invalid key length(0) or Type(0)
[   85.913577] Key4Str is Invalid key length(0) or Type(0)
[   85.953928] [PMF]Set_PMFMFPC_Proc:: apidx=0, Desired MFPC=1
[   85.959684] [PMF]Set_PMFMFPR_Proc:: apidx=0, Desired MFPR=0
[   85.965492] [PMF]Set_PMFSHA256_Proc:: apidx=0, Desired PMFSHA256=0
[   85.972629] FW Version:
[   85.972636] C
[   85.975109] L
[   85.976685] 1
[   85.978253] 7
[   85.979820] 3
[   85.981391] 7
[   85.982982] 6
[   85.984596] 6
[   85.986169] _
[   85.987736] R
[   85.989305] 
[   85.992347] FW Build Date:
[   85.992350] 2
[   85.995094] 0
[   85.996679] 1
[   85.998250] 7
[   85.999838] 1
[   86.001427] 1
[   86.002994] 1
[   86.004584] 0
[   86.006158] 1
[   86.007722] 0
[   86.009289] 5
[   86.010854] 9
[   86.012422] 3
[   86.013991] 2
[   86.015588] 
[   86.017184] 
[   86.020275] AsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC)
[   86.026157] efuse_probe: efuse = 10000002
[   86.030158] RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5
[   86.035566] RtmpEepromGetDefault::e2p_dafault=1
[   86.040298] RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1
[   86.047877] NVM is FLASH mode, flash_offset = 0x0
[   86.052614] 1. Phy Mode = 14
[   86.055956] @@@  NICReadEEPROMParameters : pAd->FWLoad=1 
[   86.061352] Country Region from e2p = ffff
[   86.065563] tssi_1_target_pwr_g_band = 46
[   86.069583] 2. Phy Mode = 14
[   86.072604] 3. Phy Mode = 14
[   86.075527] NICInitPwrPinCfg(14): Not support for HIF_MT yet!
[   86.081259] NICInitializeAsic(588): Not support rtmp_mac_sys_reset () for HIF_MT yet!
[   86.089105] mt_mac_init()-->
[   86.091995] mt7603_init_mac_cr()-->
[   86.095900] AsicSetMacMaxLen(1907): Set the Max RxPktLen=1024!
[   86.101718] <--mt_mac_init()
[   86.104857] 	WTBL Segment 1 info:
[   86.108168] 		MemBaseAddr/FID:0x28000/0
[   86.111984] 		EntrySize/Cnt:32/128
[   86.115417] 	WTBL Segment 2 info:
[   86.118725] 		MemBaseAddr/FID:0x40000/0
[   86.122540] 		EntrySize/Cnt:64/128
[   86.125970] 	WTBL Segment 3 info:
[   86.129277] 		MemBaseAddr/FID:0x42000/64
[   86.133179] 		EntrySize/Cnt:64/128
[   86.136630] 	WTBL Segment 4 info:
[   86.139936] 		MemBaseAddr/FID:0x44000/128
[   86.143923] 		EntrySize/Cnt:32/128
[   86.147462] AntCfgInit(2689): Not support for HIF_MT yet!
[   86.153160] MCS Set = ff ff 00 00 01
[   86.158014] SYNC - BBP R4 to 20MHz.l
[   86.765252] SYNC - BBP R4 to 20MHz.l
[   87.365291] SYNC - BBP R4 to 20MHz.l
[   87.975449] SYNC - BBP R4 to 20MHz.l
[   88.585194] SYNC - BBP R4 to 20MHz.l
[   89.185306] SYNC - BBP R4 to 20MHz.l
[   89.785339] SYNC - BBP R4 to 20MHz.l
[   90.385347] SYNC - BBP R4 to 20MHz.l
[   90.985481] SYNC - BBP R4 to 20MHz.l
[   91.585066] SYNC - BBP R4 to 20MHz.l
[   92.185090] SYNC - BBP R4 to 20MHz.l
[   92.784150] [PMF]ap_pmf_init:: Security is not WPA2/WPA2PSK AES
[   92.790059] [PMF]ap_pmf_init:: apidx=0, MFPC=0, MFPR=0, SHA256=0
[   92.908043] [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
[   92.914348] AsicSetRalinkBurstMode(4325): Not support for HIF_MT yet!
[   92.920755] RTMPSetPiggyBack(943): Not support for HIF_MT yet!
[   92.932814] AsicSetTxPreamble(4312): Not support for HIF_MT yet!
[   92.941099] The 4-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 4
[   92.948736] AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xa0
[   92.954678] Main bssid = 20:76:93:56:8e:42
[   92.958849] <==== rt28xx_init, Status=0
[   92.962726] @@@ ed_monitor_exit : ===>
[   92.966467] @@@ ed_monitor_exit : <===
[   92.970209] mt7603_set_ed_cca: TURN OFF EDCCA  mac 0x10618 = 0x8564267c, EDCCA_Status=0
[   92.978195] WiFi Startup Cost (ra0): 7.340s
[   92.982896] IPv6: ADDRCONF(NETDEV_CHANGE): ra0: link becomes ready
[   92.989483] br-lan: port 2(ra0) entered blocking state
[   92.994672] br-lan: port 2(ra0) entered forwarding state
[   93.001262] br-lan: port 3(rai0) entered blocking state
[   93.006851] br-lan: port 3(rai0) entered disabled state
[   93.013336] device rai0 entered promiscuous mode
[   93.035406] The 4-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 4
[   93.043176] [PMF]ApCli_Open:: MFPC=0, MFPR=0, SHA256=0
[   93.281215] ==>rlt_wlan_chip_onoff(): OnOff:1, Reset= 0, pAd->WlanFunCtrl:0x208, Reg-WlanFunCtrl=0x209
[   93.290717] build time = 
[   93.290729] 2
[   93.293363] 0
[   93.295022] 1
[   93.296615] 4
[   93.298202] 1
[   93.299787] 1
[   93.301371] 1
[   93.302957] 5
[   93.304588] 0
[   93.306181] 6
[   93.307773] 0
[   93.309361] 6
[   93.310930] 0
[   93.312497] 6
[   93.314121] a
[   93.315708] 
[   93.318754] 
[   93.320239] rom patch for E3 IC
[   93.323363] 
[   93.324866] platform = 
[   93.324874] A
[   93.327340] L
[   93.328932] P
[   93.330502] S
[   93.332069] 
[   93.335145] hw/sw version = 
[   93.335155] 8a
[   93.338029] 10
[   93.339684] 8a
[   93.341337] 10
[   93.342992] 
[   93.346183] patch version = 
[   93.346195] 0
[   93.349075] 0
[   93.350657] 0
[   93.352249] 10
[   93.353833] 
[   93.358125] FW Version:0.0.00 
[   93.358132] Build:1
[   93.363267] Build Time:
[   93.363270] 2
[   93.365752] 0
[   93.367339] 1
[   93.368908] 6
[   93.370495] 0
[   93.372318] 7
[   93.373932] 1
[   93.375554] 1
[   93.377133] 1
[   93.378709] 4
[   93.380307] 4
[   93.381911] 3
[   93.383505] _
[   93.385163] _
[   93.386764] _
[   93.388346] _
[   93.389921] 
[   93.392984] fw for E3 IC
[   93.411117] RX[0] DESC 14c46db2 size = 4096
[   93.416414] RX[1] DESC ed045ab1 size = 512
[   93.423605] E2pAccessMode=2
[   93.427217] cfg_mode=14
[   93.429662] cfg_mode=14
[   93.432121] wmode_band_equal(): Band Not Equal!
[   93.571182] Key1Str is Invalid key length(0) or Type(0)
[   93.576668] Key2Str is Invalid key length(0) or Type(0)
[   93.582100] Key3Str is Invalid key length(0) or Type(0)
[   93.587650] Key4Str is Invalid key length(0) or Type(0)
[   93.609861] 1. Phy Mode = 49
[   93.613052] Initialize MAC Address from E2PROM 
[   93.617759] E2PROM MAC: 20:76:93:56:8e:44
[   93.621769] Use the MAC address what is assigned from EEPROM. 
[   93.627634] Current MAC: 20:76:93:56:8e:44
[   93.631759] get_chl_grp:illegal channel (167)
[   93.636148] get_chl_grp:illegal channel (167)
[   93.640498] get_chl_grp:illegal channel (169)
[   93.644911] get_chl_grp:illegal channel (169)
[   93.649258] get_chl_grp:illegal channel (171)
[   93.653594] get_chl_grp:illegal channel (171)
[   93.657987] get_chl_grp:illegal channel (173)
[   93.662382] get_chl_grp:illegal channel (173)
[   93.666806] Country Region from e2p = ffff
[   93.670948] mt76x2_read_temp_info_from_eeprom:: is_temp_tx_alc=0, temp_tx_alc_enable=0
[   93.678968] mt76x2_read_tx_alc_info_from_eeprom:: is_ePA_mode=1, ePA_type=1
[   93.686015] mt76x2_read_tx_alc_info_from_eeprom:: [5G band] high_temp_slope=15, low_temp_slope=9
[   93.694842] mt76x2_read_tx_alc_info_from_eeprom:: [2G band] high_temp_slope=0, low_temp_slope=0
[   93.703526] mt76x2_read_tx_alc_info_from_eeprom:: [5G band] tc_lower_bound=-7, tc_upper_bound=4
[   93.712268] mt76x2_read_tx_alc_info_from_eeprom:: [2G band] tc_lower_bound=0, tc_upper_bound=0
[   93.720972] mt76x2_get_external_lna_gain::LNA type=0x1, BLNAGain=0xffffff8c, ALNAGain0=0xffffff8f, ALNAGain1=0xffffff8f, ALNAGain2=0xffffff8f
[   93.733726] 2. Phy Mode = 49
[   93.736754] 3. Phy Mode = 49
[   93.739691] andes_pci_fw_init
[   93.742755] 0x1300 = 00064320
[   93.778736] AntCfgInit: primary/secondary ant 0/1
[   93.783517] andes_load_cr:cr_type(2)
[   93.800062] MCS Set = ff ff 00 00 01
[   97.874137]  ch36 bssid=dc:4b:dd:1d:51:f3
[   97.878146]  ch44 bssid=a4:c7:4b:5e:1b:60
[   97.882133]  ch165 bssid=80:22:78:a7:b1:df
[   97.886430] =====================================================
[   97.892618] Channel 36 : Dirty = 70, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
[   97.900619] Channel 40 : Dirty = 64, False CCA = 109, Busy Time = 0, Skip Channel = FALSE
[   97.909017] Channel 44 : Dirty = 80, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
[   97.917145] Channel 48 : Dirty = 32, False CCA = 50, Busy Time = 0, Skip Channel = FALSE
[   97.925313] Channel 149 : Dirty = 0, False CCA = 12, Busy Time = 0, Skip Channel = FALSE
[   97.933530] Channel 153 : Dirty = 0, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
[   97.941855] Channel 157 : Dirty = 0, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
[   97.949862] Channel 161 : Dirty = 32, False CCA = 8, Busy Time = 0, Skip Channel = FALSE
[   97.957947] Channel 165 : Dirty = 90, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
[   97.966455] =====================================================
[   97.972788] Rule 1 CCA value : Min Dirtiness (Include extension channel) ==> Select Channel 149 
[   97.981738] Min Dirty = 32
[   97.984453] ExChannel = 0 , 0
[   97.987404] BW        = 80
[   98.106170] mt76x2_bbp_adjust():rf_bw=2, ext_ch=1, PrimCh=149, HT-CentCh=151, VHT-CentCh=155
[   98.163836] APStartUp(): AP Set CentralFreq at 155(Prim=149, HT-CentCh=151, VHT-CentCh=155, BBP_BW=2)
[   98.186753] mt76x2_calibration(channel = 155)
[   98.562039] Main bssid = 20:76:93:56:8e:44
[   98.566174] mt76x2_reinit_agc_gain:original agc_vga0 = 0x42, agc_vga1 = 0x42
[   98.573187] mt76x2_reinit_agc_gain:updated agc_vga0 = 0x42, agc_vga1 = 0x42
[   98.580138] mt76x2_reinit_hi_lna_gain:original hi_lna0 = 0x36, hi_lna1 = 0x36
[   98.587573] mt76x2_reinit_hi_lna_gain:updated hi_lna0 = 0x36, hi_lna1 = 0x36
[   98.594681] original vga value(chain0) = 42
[   98.598852] original vga value(chain1) = 42
[   98.603027] <==== rt28xx_init, Status=0
[   98.606873] RTMPDrvOpen(1):Check if PDMA is idle!
[   98.611693] RTMPDrvOpen(2):Check if PDMA is idle!
[   98.616587] WiFi Interface Up Time (rai0): 5.340s
[   98.623078] IPv6: ADDRCONF(NETDEV_CHANGE): rai0: link becomes ready
[   98.629971] br-lan: port 3(rai0) entered blocking state
[   98.635287] br-lan: port 3(rai0) entered forwarding state
[   99.264269] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  100.284152] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  101.324150] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  102.364185] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  103.404158] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  105.874400] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  106.924267] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  107.964271] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  109.004664] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  110.044690] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  112.474659] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  113.484135] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  114.524136] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  115.564131] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  116.604130] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  118.285993] update_associated_mac_entry(): Peer's PhyCap=>Mode:VHT, BW:80M
[  118.497564] WpaEAPOLKeyAction: CliIdx == 0xFF  pHeader->Addr2(CE-89-2D-81-1B-1F) !!!
[  118.505307] Receive EAPoL-Key frame from STA CE-89-2D-81-1B-1F wcid(1)
[  118.513984] WpaEAPOLKeyAction: CliIdx == 0xFF  pHeader->Addr2(CE-89-2D-81-1B-1F) !!!
[  118.521715] Receive EAPoL-Key frame from STA CE-89-2D-81-1B-1F wcid(1)
[  118.528362] AP SETKEYS DONE - WPA2, AuthMode(7)=WPA2PSK, WepStatus(6)=AES, GroupWepStatus(6)=AES
[  118.528362] 
[  118.585389] Rcv Wcid(1) AddBAReq
[  118.588621] Start Seq = 00000000
[  119.036997] Rcv Wcid(1) AddBAReq
[  119.040231] Start Seq = 00000001
[  119.074307] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  120.124142] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  121.164138] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  122.204130] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  123.244139] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  125.674329] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  126.684136] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  127.724142] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  128.764178] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  129.804192] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  132.284282] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  133.324048] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  134.364147] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  135.404018] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  136.444027] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  138.884216] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  139.963917] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  141.003901] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  142.043962] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  143.083973] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  145.494018] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  146.523820] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  147.563802] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  148.603861] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  149.643761] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  152.094181] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  153.163785] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  154.203707] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  155.243697] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  156.283682] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  158.693907] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  159.723729] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  160.763702] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  161.803637] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  162.843725] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  165.293768] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  166.363740] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  167.403851] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  168.443640] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  169.483722] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  171.893845] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  172.923684] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  173.963594] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  175.003666] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  176.043908] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  178.503707] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  179.563524] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  180.603518] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  181.643516] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  182.683507] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  185.103678] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  186.123596] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  187.163515] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  188.203488] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  189.243594] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  191.703663] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  192.763603] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  193.803479] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  194.843484] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  195.883554] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  198.303596] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  199.323434] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  200.363422] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  201.403395] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  202.443388] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  204.903661] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  205.963374] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  207.003356] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  208.043344] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  209.083355] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  211.503504] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  212.523325] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  213.563398] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  214.603309] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  215.643297] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  218.103449] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  219.163286] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  220.203261] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  221.243278] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  222.283264] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  224.703413] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  225.723283] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  226.763303] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  227.803167] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  228.843233] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  231.303263] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  232.363042] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  233.403008] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  234.442976] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  235.482960] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  237.903145] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  238.922865] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  239.963104] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  241.002816] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  242.042804] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  244.502891] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  245.562687] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  246.602688] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  247.642624] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  248.682706] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  251.102724] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  252.122666] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  253.162536] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  254.202456] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  255.242458] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  257.712560] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  258.762350] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  259.802339] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  260.842319] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  261.882467] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  264.312470] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  265.322270] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  266.362908] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  267.402480] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  268.442224] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  270.912364] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  271.962171] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  273.002232] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  274.042154] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  275.082134] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  277.512299] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  278.522109] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  279.562164] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  280.602071] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  281.642063] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  284.112208] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  285.162040] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  286.202102] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  287.242028] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  288.282019] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  290.712144] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  291.722134] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  292.761908] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  293.801816] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  294.841763] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  297.311939] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  298.361757] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  299.401759] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  300.441762] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  301.481774] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  303.911970] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  304.921830] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  305.961835] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  307.001863] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  308.041839] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  310.511938] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  311.561750] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  312.601763] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  313.641754] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
[  314.681782] AP-Client probe: SSID=, BSSID=00:00:00:00:00:00
@nanchuci
Copy link

闭源驱动，你是不是改了LAN口设置

@Jinnrry
Copy link
Author

Jinnrry commented Jan 29, 2022

闭源驱动，你是不是改了LAN口设置

没动呀

@kzkzzzz
Copy link

kzkzzzz commented Jan 30, 2022

暂时手动开启可以解决，在启动项脚本加上

# 启动2.4g 和 5g 信号
ip link set ra0 up
ip link set rai0 up

# 桥接网卡
brctl addif br-lan ra0
brctl addif br-lan rai0

@liwenjie119
Copy link
Contributor

lan口改为192.168.100.3然后新三lan口有线接上级路由器当ap使用，重启后wifi无法启动，需要在页面重启无线。

@hnrrn
Copy link

hnrrn commented Feb 10, 2022

闭源驱动，你是不是改了LAN口设置

我是在编译的时候更改了lan 口ip ，也出现这个问题。。。难道改
LAN口设置会影响的无线启动吗

@Jinnrry
Copy link
Author

Jinnrry commented Feb 10, 2022

@hnrrn @liwenjie119 我也是改了Lan口IP，就会出这个问题，按照kzkzzzz说的，自己加了一个启动项解决了

脚本内容

#!/bin/sh /etc/rc.common
START=99
start() {
  ip link set ra0 up
  ip link set rai0 up

  brctl addif br-lan ra0
  brctl addif br-lan rai0
}

放到/etc/init.d/start_wifi 然后执行 /etc/init.d/start_wifi enable

@modelsun
Copy link

Jinnrr

请问这个怎么加到源码里，编译进固件？能这样搞吗？谢谢

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
6 participants
@Jinnrry @liwenjie119 @kzkzzzz @hnrrn @nanchuci @modelsun