Skip to content
/ sleet Public

Sleet - Downloads and Aggregates Rspec Persistence Files from CircleCI

License

Notifications You must be signed in to change notification settings

coreyja/sleet

Repository files navigation

Sleet ☁️ ❄️

Gem Version Maintainability CircleCI Join the chat at https://gitter.im/rspec-sleet/community

Background and Problem

RSpec has a feature that I find very useful which is the --only-failures option. This will re-run only that examples that failed the previous run.

CircleCI has support for uploading artifacts with your builds, which allows us to store the persistance file that powers the RSpec only failures option. However! CircleCI also supports and encourages parallelizing your build, which means even if you upload your rspec persistance file, you actually have a number of them each containing a subset of your test suite. This is where Sleet comes in!

Purpose

This tool does two things:

  1. It downloads all of the .rspec_failed_examples files that were uploaded to CircleCI for the most recent build of the current branch
  2. It combines the multiple files into a single sorted .rspec_failed_examples file, and moves it to the current directory

Getting Started

1. Configure RSpec to Create and Use an example persistance file

We need to set the example_status_persistence_file_path config in RSpec. Here are the relevant RSpec docs.

The first step is to create(/or add to) your spec/spec_helper.rb file. We want to include the following configuration, which tells RSpec where to store the status persistance file. The actual location and file name are up to you, this is just an example. (Though using this name will require less configuration later.)

RSpec.configure do |c|
  c.example_status_persistence_file_path = ".rspec_example_statuses"
end

if you just created the spec_helper.rb file then you will need to create a .rspec file containing the following to load your new helper file.

--require spec_helper

Again there are other ways to load your spec_helper.rb file, including requiring it from each spec. Pick one that works for you.

2. Collect the example persistance files in CircleCI

To do this we need to create a step which saves the .rspec_example_statuses as artifacts of the build. The following is an example of such a step in CircleCI. This must happen after rspec has run or else the persistance file will not exist.

- store_artifacts:
    path: .rspec_example_statuses

3. Save a CircleCI Token locally (to access private builds)

In order to see private builds/repos in CircleCI you will need to get a CircleCI token and save it locally to a Sleet Configuration file. The recommended approach is to create a yml file in your home directory which contains your the key circle_ci_token

circle_ci_token: PLACE_TOKEN_HERE

An API token can be generated here: https://circleci.com/account/api

4. Run this tool from your project

sleet

This will look up the latest completed build in CircleCI for this branch, and download all the relevant .rspec_example_statuses files. It then combines and sorts them and saves the result to the .rspec_example_statuses file locally.

5. Run RSpec with --only-failures

bundle exec rspec --only-failures

This will run only the examples that failed in CircleCI!

Configuration

If you are using Worklfows in your CircleCI builds, or you are working with a different persistance file name, you may need to configure Sleet beyond the defaults.

Sleet currently supports two ways to input configurations:

  1. Through YML files
    • Sleet will search 'up' from where the command was run and look for .sleet.yml files. It will combine all the files it finds, such that 'deeper' files take presedence. This allows you to have a user-level config at ~/.sleet.yml and have project specific files which take presendence over the user level config (ex: ~/Projects/foo/.sleet.yml)
  2. Through the CLI
    • These always take presendece the options provided in the YML files

To view your current configuration use the sleet config command which will give you a table of the current configuration. You can also use the --print-config flag with the fetch command to print out the config, including any other CLI options. This can be useful for bebugging as the output also tells you where each option came from.

Options

These are the options that are currently supported

--source_dir

Alias: s

This is the directory of the source git repo. If a source_dir is NOT given we look up from the current directory for the nearest git repo.

--input_file

Alias: i

This is the name of the Rspec Circle Persistance File in CircleCI. The default is .rspec_example_statuses

This will match if the full path on CircleCI ends in the given name.

--output_file

Alias: o

This is the name for the output file, on your local system. It is relative to the source_dir.

Will be IGNORED if workflows is provided.

--workflows

Alias: w

If you are using workflows in CircleCI, then this is for you! You need to tell Sleet which build(s) to look in, and where each output should be saved. The input is a hash, where the key is the build name and the value is the output_file for that build. Sleet supports saving the artifacts to multiple builds, meaning it can support a mono-repo setup.

Build-Test-Deploy Demo:

For this example you have three jobs in your CircleCI Workflow, build, test and deploy, but only 1 (the test build) generate an Rspec persistance file

This command will pick the test build and save its artifacts to the .rspec_example_statuses file

sleet fetch --workflows test:.rspec_example_statuses

MonoRepo Demo:

If you have a mono-repo that contains 3 sub-dirs. foo, bar and baz. And each one has an accompanying build. We can process all these sub-dirs at once with the following workflow command.

sleet fetch --workflows foo-test:foo/.rpsec_example_statuses bar-test:bar/.rspec_example_statuses baz-specs:baz/spec/examples.txt

--username

Alias: u

This is the GitHub username that is referenced by the CircleCI build. By default, Sleet will base this on your upstream git remote.

--project

Alias: p

This is the GitHub project that is referenced by the CircleCI build. By default, Sleet will base this on your upstream git remote.

--branch

Alias: b

This is the remote branch that is referenced by the CircleCI build. Sleet will attempt to guess this by default, but if you are pushing to a forked repo, you may need to specify a different branch name (e.g. "pull/1234").

About

Sleet - Downloads and Aggregates Rspec Persistence Files from CircleCI

Topics

Resources

License

Code of conduct

Stars

Watchers

Forks

Packages

No packages published