Skip to content

Latest commit

 

History

History
51 lines (40 loc) · 1.13 KB

README.md

File metadata and controls

51 lines (40 loc) · 1.13 KB
Raw

blackice-ii-serialware

Alternative firmware for the BlackIce II to allow uploads over serial.

This firmware is hacky and should be used at your own risk.

Build Guide

  1. mkdir build
  2. cd build
  3. cmake ..
  4. build

serialware.bin should now exist in the build directory and be ready for flashing.

Flashing Guide

  1. Connect SWD device (e.g. Raspberry PI or STLink)
  2. Create openocd.cfg, replacing the interface file and adapter speed as necessary 
    source /usr/local/share/openocd/scripts/interface/raspberrypi-native.cfg
transport select swd
source /usr/local/share/openocd/scripts/target/stm32l4x.cfg
reset_config  srst_nogate

adapter_nsrst_delay 100
adapter_nsrst_assert_width 100
adapter speed 5

init
targets
  3. Start openocd 
    sudo openocd
  4. Connect to openocd 
    telnet localhost 4444
  5. Flash 
    halt
flash write_image erase serialware.bin 0x08000000
  6. Reset device

Thanks

The firmware is based upon the original BlackIce II firmware.