Makefile.vc

#***************************************************************************
#                                  _   _ ____  _
#  Project                     ___| | | |  _ \| |
#                             / __| | | | |_) | |
#                            | (__| |_| |  _ <| |___
#                             \___|\___/|_| \_\_____|
#
# Copyright (C) Daniel Stenberg, <daniel@haxx.se>, et al.
#
# This software is licensed as described in the file COPYING, which
# you should have received as part of this distribution. The terms
# are also available at https://curl.se/docs/copyright.html.
#
# You may opt to use, copy, modify, merge, publish, distribute and/or sell
# copies of the Software, and permit persons to whom the Software is
# furnished to do so, under the terms of the COPYING file.
#
# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
# KIND, either express or implied.
#
# SPDX-License-Identifier: curl
#
#***************************************************************************

!IF "$(MODE)"=="static"
TARGET = $(LIB_NAME_STATIC)
AS_DLL = false
CFGSET=true
!ELSEIF "$(MODE)"=="dll"
TARGET = $(LIB_NAME_DLL)
AS_DLL = true
CFGSET=true
!ELSE
!MESSAGE Invalid mode: $(MODE)

#######################
# Usage
#

!MESSAGE See winbuild/README.md for usage
!ERROR please choose a valid mode

!ENDIF

!INCLUDE "../lib/Makefile.inc"
LIBCURL_OBJS=$(CSOURCES:.c=.obj)

!INCLUDE "../src/Makefile.inc"

# tool_hugehelp has a special rule
CURL_OBJS=$(CURL_CFILES:tool_hugehelp.c=)

CURL_OBJS=$(CURL_OBJS:.c=.obj)


# backwards compatible check for USE_SSPI
!IFDEF USE_SSPI
ENABLE_SSPI = $(USE_SSPI)
!ENDIF

# default options

!IFNDEF MACHINE
# Note: nmake magically changes the value of PROCESSOR_ARCHITECTURE from "AMD64"
# to "x86" when building in a 32 bit build environment on a 64 bit machine.
!IF "$(PROCESSOR_ARCHITECTURE)"=="AMD64"
MACHINE = x64
!ELSE
MACHINE = x86
!ENDIF
!ENDIF

!IFNDEF ENABLE_IDN
USE_IDN = true
!ELSEIF "$(ENABLE_IDN)"=="yes"
USE_IDN = true
!ELSEIF "$(ENABLE_IDN)"=="no"
USE_IDN = false
!ENDIF

!IFNDEF ENABLE_IPV6
USE_IPV6 = true
!ELSEIF "$(ENABLE_IPV6)"=="yes"
USE_IPV6 = true
!ELSEIF "$(ENABLE_IPV6)"=="no"
USE_IPV6 = false
!ENDIF

!IFNDEF ENABLE_SSPI
USE_SSPI = true
!ELSEIF "$(ENABLE_SSPI)"=="yes"
USE_SSPI = true
!ELSEIF "$(ENABLE_SSPI)"=="no"
USE_SSPI = false
!ENDIF

!IFNDEF ENABLE_SCHANNEL
!IF DEFINED(WITH_SSL) || DEFINED(WITH_MBEDTLS)
USE_SCHANNEL = false
!ELSE
USE_SCHANNEL = $(USE_SSPI)
!ENDIF
!ELSEIF "$(ENABLE_SCHANNEL)"=="yes"
USE_SCHANNEL = true
!ELSEIF "$(ENABLE_SCHANNEL)"=="no"
USE_SCHANNEL = false
!ENDIF

!IFNDEF ENABLE_OPENSSL_AUTO_LOAD_CONFIG
ENABLE_OPENSSL_AUTO_LOAD_CONFIG = true
!ELSEIF "$(ENABLE_OPENSSL_AUTO_LOAD_CONFIG)"=="yes"
!UNDEF ENABLE_OPENSSL_AUTO_LOAD_CONFIG
ENABLE_OPENSSL_AUTO_LOAD_CONFIG = true
!ELSEIF "$(ENABLE_OPENSSL_AUTO_LOAD_CONFIG)"=="no"
!UNDEF ENABLE_OPENSSL_AUTO_LOAD_CONFIG
ENABLE_OPENSSL_AUTO_LOAD_CONFIG = false
!ENDIF

!IFNDEF ENABLE_WEBSOCKETS
ENABLE_WEBSOCKETS = false
!ELSEIF "$(ENABLE_WEBSOCKETS)"=="yes"
!UNDEF ENABLE_WEBSOCKETS
ENABLE_WEBSOCKETS = true
!ELSEIF "$(ENABLE_WEBSOCKETS)"=="no"
!UNDEF ENABLE_WEBSOCKETS
ENABLE_WEBSOCKETS = false
!ENDIF

!IFNDEF ENABLE_UNICODE
USE_UNICODE = false
!ELSEIF "$(ENABLE_UNICODE)"=="yes"
USE_UNICODE = true
!ELSEIF "$(ENABLE_UNICODE)"=="no"
USE_UNICODE = false
!ENDIF

CONFIG_NAME_LIB = libcurl

!IF "$(WITH_SSL)"=="dll"
USE_SSL = true
SSL     = dll
!ELSEIF "$(WITH_SSL)"=="static"
USE_SSL = true
SSL     = static
!ENDIF

!IF "$(ENABLE_NGHTTP2)"=="yes"
# compatibility bit, WITH_NGHTTP2 is the correct flag
WITH_NGHTTP2 = dll
USE_NGHTTP2  = true
NGHTTP2      = dll
!ELSEIF "$(WITH_NGHTTP2)"=="dll"
USE_NGHTTP2 = true
NGHTTP2     = dll
!ELSEIF "$(WITH_NGHTTP2)"=="static"
USE_NGHTTP2 = true
NGHTTP2     = static
!ENDIF

!IFNDEF USE_NGHTTP2
USE_NGHTTP2 = false
!ENDIF

!IF "$(ENABLE_MSH3)"=="yes"
# compatibility bit, WITH_MSH3 is the correct flag
WITH_MSH3    = dll
USE_MSH3     = true
MSH3         = dll
!ELSEIF "$(WITH_MSH3)"=="dll"
USE_MSH3     = true
MSH3         = dll
!ELSEIF "$(WITH_MSH3)"=="static"
USE_MSH3     = true
MSH3         = static
!ENDIF

!IFNDEF USE_MSH3
USE_MSH3 = false
!ENDIF

!IF "$(WITH_MBEDTLS)"=="dll" || "$(WITH_MBEDTLS)"=="static"
USE_MBEDTLS = true
MBEDTLS     = $(WITH_MBEDTLS)
!ENDIF

!IF "$(WITH_CARES)"=="dll"
USE_CARES = true
CARES     = dll
!ELSEIF "$(WITH_CARES)"=="static"
USE_CARES = true
CARES     = static
!ENDIF

!IF "$(WITH_ZLIB)"=="dll"
USE_ZLIB = true
ZLIB     = dll
!ELSEIF "$(WITH_ZLIB)"=="static"
USE_ZLIB = true
ZLIB     = static
!ENDIF

!IF "$(WITH_SSH2)"=="dll"
USE_SSH2 = true
SSH2     = dll
!ELSEIF "$(WITH_SSH2)"=="static"
USE_SSH2 = true
SSH2     = static
!ENDIF

!IF "$(WITH_SSH)"=="dll"
USE_SSH = true
SSH     = dll
!ELSEIF "$(WITH_SSH)"=="static"
USE_SSH = true
SSH     = static
!ENDIF

CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-vc$(VC)-$(MACHINE)

!IF "$(DEBUG)"=="yes"
CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-debug
!ELSE
CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-release
!ENDIF

!IF "$(AS_DLL)"=="true"
CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-dll
!ELSE
CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-static
!ENDIF

!IF "$(USE_SSL)"=="true"
CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-ssl-$(SSL)
!ENDIF

!IF "$(USE_MBEDTLS)"=="true"
CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-mbedtls-$(MBEDTLS)
!ENDIF

!IF "$(USE_CARES)"=="true"
CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-cares-$(CARES)
!ENDIF

!IF "$(USE_ZLIB)"=="true"
CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-zlib-$(ZLIB)
!ENDIF

!IF "$(USE_SSH2)"=="true"
CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-ssh2-$(SSH2)
!ENDIF

!IF "$(USE_SSH)"=="true"
CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-ssh-$(SSH)
!ENDIF

!IF "$(USE_IPV6)"=="true"
CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-ipv6
!ENDIF

!IF "$(USE_SSPI)"=="true"
CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-sspi
!ENDIF

!IF "$(USE_SCHANNEL)"=="true"
CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-schannel
!ENDIF

!IF "$(USE_NGHTTP2)"=="true"
CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-nghttp2-$(NGHTTP2)
!ENDIF

!IF "$(USE_MSH3)"=="true"
CONFIG_NAME_LIB = $(CONFIG_NAME_LIB)-msh3
!ENDIF

!MESSAGE configuration name: $(CONFIG_NAME_LIB)

# Note these directories are removed by this makefile's 'clean' so they should
# not be changed to point to user-specified directories that may contain other
# data. MakefileBuild.vc uses the same variable names but allows some user
# changes and therefore does not remove the directories.
BUILD_DIR=../builds/$(CONFIG_NAME_LIB)
LIBCURL_DIROBJ = ..\builds\$(CONFIG_NAME_LIB)-obj-lib
CURL_DIROBJ = ..\builds\$(CONFIG_NAME_LIB)-obj-curl
DIRDIST = ..\builds\$(CONFIG_NAME_LIB)\

$(MODE):
	@SET DIROBJ=$(LIBCURL_DIROBJ)
	@SET MACRO_NAME=LIBCURL_OBJS
	@SET OUTFILE=LIBCURL_OBJS.inc
	@CALL gen_resp_file.bat $(LIBCURL_OBJS)

	@SET DIROBJ=$(CURL_DIROBJ)
	@SET MACRO_NAME=CURL_OBJS
	@SET OUTFILE=CURL_OBJS.inc
	@CALL gen_resp_file.bat $(CURL_OBJS)

	@SET CONFIG_NAME_LIB=$(CONFIG_NAME_LIB)
	@SET MACHINE=$(MACHINE)
	@SET USE_NGHTTP2=$(USE_NGHTTP2)
	@SET USE_MSH3=$(USE_MSH3)
	@SET USE_IDN=$(USE_IDN)
	@SET USE_IPV6=$(USE_IPV6)
	@SET USE_SSPI=$(USE_SSPI)
	@SET USE_SCHANNEL=$(USE_SCHANNEL)
	@SET USE_UNICODE=$(USE_UNICODE)
# compatibility bit
	@SET WITH_NGHTTP2=$(WITH_NGHTTP2)

	@$(MAKE) /NOLOGO /F MakefileBuild.vc

copy_from_lib:
	echo copying .c...
	FOR %%i IN ($(CURLX_CFILES:/=\)) DO copy %%i ..\src\

clean:
	@if exist $(LIBCURL_DIROBJ) rd /s /q $(LIBCURL_DIROBJ)
	@if exist $(CURL_DIROBJ) rd /s /q $(CURL_DIROBJ)
	@if exist $(DIRDIST) rd /s /q $(DIRDIST)
	$(MAKE) /NOLOGO /F MakefileBuild.vc $@