mysqldump-secure.conf

# mysqldump-secure.conf
#
# This is the main configuration file for mysqldump-secure.
#
#
# Each configuration directive will indicate whether or not it has
# a default value and what the default value is.
#
# Directives with a default value:
# --------------------------------
# 1. If you enter a wrong value, mysqldump-secure will warn
#    to stderr and apply the default value.
# 2. If you remove the variable, mysqldump-secure will warn
#    to stderr and apply the default value.
#
# Directives without a default value:
# -----------------------------------
# 1. If you enter a wrong value, mysqldump-secure will error
#    to stderr and abort.
# 2. If you remove the variable, mysqldump-secure will error
#    to stderr and abort.
#
# The above described behavior is a security mechanism for critical
# configurations. For example if you have removed the directive that
# sets whether or not to encrypt the backups, then it is not sure
# whether or not you are paranoid about your data and mysqldump-secure
# will abort immediately until you have told it correctly whether or
# not to encrypt.
# The same is true for SSL connections and some other directives.
# Just check for the default values.
#



################################################################################
#
#  1.   O U T P U T   F I L E / F O L D E R   S E T T I N G S
#
################################################################################

############################################################
# Backup directory
############################################################

# Backup directory
#
# This is the directory where your backups will be written to disk.
# Will be created automatically if it does not exist.
#
# Default value: "##INSTALL_PREFIX##/var/mysqldump-secure"
DUMP_DIR="/var/mysqldump-secure"



# Backup directory chmod.
# The directory permissions.
# Will be adjusted if it differs from the specified value.
#
# Default value: "0700"
DUMP_DIR_CHMOD="0700"



############################################################
# Backup file
############################################################

# Prefix for the database dump file name.
#
# This is the filename prefix for all your backup files.
#
# Default value: "$(date '+%Y-%m-%d')_$(date '+%H-%M')__""
DUMP_FILE_PRE="$(date '+%Y-%m-%d')_$(date '+%H-%M')__"



# Fille chmod permission for actual backup files.
#
# NOTE: The file is directly written with this permission (via umask)
#       instead of applying chmod afterwards. This makes sure that there are no
#       race-conditions during the dump that someone can view the contens before the
#       chmod changes.
#
# Default value: "0400"
DUMP_FILE_CHMOD="0400"





################################################################################
#
#  2.   M Y S Q L   C O N N E C T I O N   S E T T I N G S
#
################################################################################

############################################################
# Host/Credentials file
############################################################

# Credentials file (host, user, pass, port, socket)
#
# WARN: Never ever pass the mysql credentials on the command line via
#       --password / -p as this can be seen by all users in ps aux or top.
#       Instead use a *.cnf file with a host, user and password combination.
#
# NOTE: No other default *.cnf files will be included for connections/dumping.
#       This is the only file that will be read my mysqldump-secure.
#
# NOTE: Only host, user, pass, port and socket directives are allowed.
#       All other options are specified in this configuration file.
#
# NOTE: Must be chmod 0400.
#       If it does not have chmod 0400,
#       mysqldump-secure will abort
#
# NOTE: No default value!
#       If this variable is not set or the file does not exist,
#       mysqldump-secure will abort.
MYSQL_CNF_FILE="/etc/mysqldump-secure.cnf"



############################################################
# SSL Connection
############################################################

# If this is set to true, an SSL connection is required and
# the program will abort, if the connection is not secured.
#
# Turn it on to force SSL and die for plain connections.
# Turn it off, to do plain-text connection (e.g.: from localhost)
#
# NOTE: No default value!
#       If this variable is not set or has an invalid value,
#       mysqldump-secure will abort.
#
# Values:
# -------
# 1: SSL
# 0: Plain-text
MYSQL_SSL_ENABLE=0


# CA pem file for SSL connection.
# This variable is only checked when $MYSQL_SSL_ENABLE is enabled.
#
# NOTE: No default value!
#       If $MYSQL_SSL_ENABLE is enabled and this variable is not set
#       or has an invalid value (file not found, no valid pem file),
#       mysqldump-secure will abort.
#
# Specify the full path to the certificate authority pem file.
MYSQL_SSL_CA_PEM="/path/to/ca.pem"


# (Optional)
# If the user account was created with the 'REQUIRE X509' option,
# then the client must also specify the proper client key and certificate
# files or the server will reject the connection.
#MYSQL_SSL_CLIENT_CERT_PEM="/path/to/client-cert.pem"
#MYSQL_SSL_CLIENT_KEY_PEM="/path/to/client-key.pem"




################################################################################
#
#  3.   M Y S Q L D U M P   O P T I O N S
#
################################################################################


############################################################
# opt-in / opt-out to databases
############################################################

#
# By default, all existing mysql databases will be backed up
# without having to explicitly specifying them.
#
# You can however fine-adjust it by ignoring certain databases
# from the backup procedure below.
#


# Opt out (Ignore)
#
# A space-separated list of databases not to be dumped (ignored).
#
# Note:
# -----
# Be aware that $REQUIRE overwrites the ignored databases.
# You can ignore all databases here and explicitly only require
# the ones you actually want to dump.
# If you ignore 'mysql' and require 'mysql',
# it wil be back-upped.
#
# Note:
# -----
# The asterisk character '*' can be used as a wildcard.
#
# Examples:
# ---------
# IGNORE=""             # <-- Empty: Nothing will be ignored
# IGNORE="*"            # <-- ignores all dbs
# IGNORE="db*"          # <-- ignores all dbs starting with db
# IGNORE="*_schema"     # <-- ignores all dbs ending with _schema (such as information_schema and performance_schema)
# IGNORE="*_schema db*" # <-- Multiple wildcards are also allowed
# IGNORE="mysql"        # <-- Ignore by matching the exact name
#
# Default value: "" <-- do not ignore anything
IGNORE="information_schema performance_schema"



# Opt-in check (Require)
#
# A space-separated list of databases that are explicitly required.
#
# If any of the specified required databases is not existent
# the script will generate an error after finishing (stderr, exit code and inside the logfile).
#
# Additionally, this information is also used by the nagios plugin and will automatically
# throw an error in nagios when any of the below specified databases were not found and/or not dumped.
#
# NOTE: The here specified databases are not guaranteed to be dumped,
#       because they might not even exist, it is rather
#       a method of letting you know, that they could not be dumped.
#
# NOTE: Use this to overwrite any ignored databases.
#       You could for example ignore all databases and only
#       require the once you desire here.
#
# Default value: "" <-- do not require anything
REQUIRE="mysql"





############################################################
# Custom mysqldump options (all databases)
############################################################

#
# Custom MySQLDump Options
#
# NOTE: Applied to all databases
#

# mysqldump options/arguments
#
# Adjust as needed.
#
# NOTE: `--opt` is turned on by default, so it must not be specified explicitly.
#       `--opt` will also automatically pull in `--quick` and `--lock-tables`.
#
#       However, `--quick` **could** be turned off automatically by mysqldump-secure, depending
#       on the $MYSQL_OPTS_QUICK_MIN_SIZE variable per database. (see below).
#
#       Also `--lock-tables` **could** be turned off automatically by mysqldump-secure, depending
#       on $CONSISTENT_DUMP_ONLY_INNODB, $CONSISTENT_DUMP_NO_INNODB and $CONSISTENT_DUMP_MIXED_INNODB
#       per database. (see below).
#
# NOTE: All mysqldump options
#         * regarding the connection (host, port, user, pass, socket)
#         * regarding SSL (enable, cert paths)
#         * regarding table locks and transactions
#         * `--quick`
#       are blacklisted and mysqldump-secure will abort with an appropriate error if specified here.
#       Those options are handled automatically via configuration directives.
#
# Default value: "--opt"
MYSQL_OPTS="--opt --default-character-set=utf8 --events --triggers --routines --hex-blob --complete-insert --extended-insert --compress"




############################################################
# Mysqldump Performance (conditional)
############################################################

#
# NOTE: Conditionally applied per database
#
#
# Apply '--quick' only on databases that are at least X MB in size
#
# >> This option is useful for dumping large tables. It forces
# >> mysqldump to retrieve rows for a table from the server a row at
# >> a time rather than retrieving the entire row set and buffering
# >> it in memory before writing it out.
#
# Turning `--quick` off for smaller databases should be more performant.
# However, the database must fit into the available RAM, so choose a small
# value here and play around with it to see if 200MB is good for you or not.
#
# Examples:
#
# MYSQL_OPT_QUICK_MIN_SIZE=0
#  --> Enable on databases >=0 MB (obviously on all databases)
#
# MYSQL_OPT_QUICK_MIN_SIZE=10
#  --> Enable on databases >=10 MB
#
# MYSQL_OPT_QUICK_MIN_SIZE=10
#  --> Enable on databases >=200 MB
#
# Default value: "200" (Databases >= 200 MB)
MYSQL_OPTS_QUICK_MIN_SIZE=200



############################################################
# Mysqldump Consistency/Transactions (conditional)
############################################################

#
# NOTE: Conditionally applied per database
#
# NOTE: Consistent mysqldumps across tables (not across all databases)
#



#
# Case 1: Only InnoDB tables inside current DB
#
# If the current dumped database only contains InnoDB tables,
# this database is then dumped with the '--single-transaction' option.
#
# With this option turned on, all tables inside this database will be dumped consistently.
# If there was any INSERT, ALTER (or other changes on the tables during the period of backup
# by another program/process), these changes will not go into dump and you will end up
# with a fully consistend dump from the time it was started doing the backup.
#
# If however the current database contains at least one table which is not using the InnoDB
# engine, the '--single-transaction' option will not be used.
# For this case see CONSISTENT_DUMP_OTHERS (below).
#
# Note:
# It is safe and recommended to leave this option turned on!
#
# Note:
# Again, this applies only to databases which only have InnoDB tables.
#
# Values:
# -------
# 0: Do not dump consistently
# 1: Dump consistently with '--single-transaction'
#
# Default value: 1
CONSISTENT_DUMP_ONLY_INNODB=1





#
# Case 2: Only non-InnoDB table engines (Not a single InnoDB table)
#
# If the current dumped database contains no InnoDB engines at all,
# this database is then dumped with the '--lock-tables' option.
#
# With this option turned on, all tables inside this database will be dumped consistently.
#
# However, every INSERT, ALTER (or other changing sql function) to tables inside this database
# will be blocked (and queued) for the time of the dump.
# So if you have a web application for example that is receiving lots of INSERTs, choose a time
# with least visitors, because the application will be blocked during the backup time.
#
#
# Solution 1: Convert all your databases to InnoDB
#   --> and ignore this option
#
# Solution 2: Choose a time where less or no changes to that database are expected
#   --> and set   CONSISTENT_DUMP_OTHERS=1
#
# Solution 3: Turn off this feature and live without consistent dumps.
#   --> and set   CONSISTENT_DUMP_OTHERS=0
#
# Note:
# Again, this applies to all databases which have at least 1 table engine that is NOT InnoDB
#
# Values:
# -------
# 0: Do not dump consistently: '--skip-lock-tables'
# 1: Dump consistently with:   '--lock-tables'
#
# Default value: 1
CONSISTENT_DUMP_NO_INNODB=1



#
# Case 3: At least 1 InnoDB table and at least one non-InnoDB table
#
# If the current dumped database contains at least one InnoDB table and at least one non-InnoDB table
# (such as MyISAM or others), this database can then be dumped in three ways:
#
#
# CONSISTENT_DUMP_MIXED_INNODB=0
# ------------------------------
# No consistency at all, applying '--skip-lock-tables'.
#
#
# CONSISTENT_DUMP_MIXED_INNODB=1
# ------------------------------
# Total consistency, applying '--lock-tables'.
#
# However, every INSERT, ALTER (or other changing sql function) to tables inside this database
# will be blocked (and queued) for the time of the dump.
# So if you have a web application for example that is receiving lots of INSERTs, choose a time
# with least visitors, because the current dumped database will be read-only
# (but all quries are queued) during the backup time.
#
# Solution 1: Convert all your tables in your databases to InnoDB
#   --> and ignore this option
#
# Solution 2: Choose a time where less or no changes to that database are expected
#   --> and set   CONSISTENT_DUMP_OTHERS=1
#
# Solution 3: Use a Master/Slave setup and always backup from slave
#   --> This is a recommendation/solution for a production environment.
#
# CONSISTENT_DUMP_MIXED_INNODB=2
# ------------------------------
# Partly consistent, applying '--single-transaction' (for the luck).
#
# All InnoDB tables will be dumped consistently, however, all others will
# not be dumped consistently.
#
#
# Values:
# -------
# 0: Do not dump consistently: '--skip-lock-tables'
# 1: Dump consistently with:   '--lock-tables'
# 2: Treat all as InnoDB:      '--single-transaction'
#
# Default value: 1
CONSISTENT_DUMP_MIXED_INNODB=1




################################################################################
#
#  4.   F E A T U R E S
#
################################################################################



############################################################
# (OPT) Loggin
############################################################


# Log output to logfile?
# 0: off
# 1: info (normal operation)
# 2: debug (info + debug), like  -v for output
# 3: trace (info + debug + trace), like -vv for output
#
# Default value: 0 (turned off)
LOG=2


# Logfile
# NOTE: Only applicable if the LOG variable is not set to 0
# NOTE: Must be writeable by the user who runs the script
#
# Default value "##INSTALL_PREFIX##/var/log/mysqldump-secure.log"
LOG_FILE="/var/log/mysqldump-secure.log"


# Logfile permissions
# NOTE: Only applicable if the LOG variable is not set to 0
# NOTE: Should be very strict to not give away information.
#
# Default value: "0600"
LOG_CHMOD="0600"



############################################################
# (OPT) Compression
############################################################


# Use compression?
#
# Compression is done before writing files to disk.
#
# Values:
# -------
# 1: yes
# 0: no (Default)
COMPRESS=1

# Specify compression options.
# The following three variables must be set, when
# COMPRESS is enabled:
# * COMPRESS_BIN: name of the binary
# * COMPRESS_ARG: arguments to pass to the binary
# * COMPRESS_EXT: extension to use
#
# NOTE: No default values can be provided and the program will simply
#       disable compression if those variables are not set.
#       If you set them wrongly dumps might now be written to disk correctly.
#       Nevertheless, every error on writing or the compression process will
#       be outputted.


#
# Choose a compression preset below.
#
# NOTE: Last turned on preset will be effective.
#       (It is a shell script and variables will be overwritten
#       by the last specified value)
#


# Gzip
COMPRESS_BIN="gzip"
COMPRESS_ARG="-9 --stdout"
COMPRESS_EXT="gz"

# pigz (parallel gzip)
#COMPRESS_BIN="pigz"
#COMPRESS_ARG="-9 --stdout"
#COMPRESS_EXT="gz"

# Bzip2
#COMPRESS_BIN="bzip2"
#COMPRESS_ARG="-9 --stdout"
#COMPRESS_EXT="bz2"

# PBzip2
# (multithreaded bzip2 version)
#COMPRESS_BIN="pbzip2"
#COMPRESS_ARG="-9 --stdout"
#COMPRESS_EXT="bz2"

# xz
# (algo: lzma2)
#COMPRESS_BIN="xz"
#COMPRESS_ARG="-9 --stdout"
#COMPRESS_EXT="xz"

# LZMA
# (On modern systems it is usually an alias to 'xz --format=lzma')
#COMPRESS_BIN="lzma"
#COMPRESS_ARG="-9 --stdout"
#COMPRESS_EXT="lzma"

# LZOP
#COMPRESS_BIN="lzop"
#COMPRESS_ARG="-9 --stdout"
#COMPRESS_EXT="lzo"




############################################################
# (OPT) Encryption
############################################################


#
# Encryption is done via openssl smime public/private key.
# This means the files can only be decrypted with a private key
# which should be placed somewhere safe (not on the same machine).
# Encryption is done via the public key which can be readable.
# @required   openssl
#
# Examples:
#
# * Create public/private key pair
#    openssl req -x509 -nodes -newkey rsa:2048 -keyout mysqldump-secure.priv.pem -out mysqldump-secure.pub.pem
#
# * How to enccrypt? (pubkey)
#    openssl smime -encrypt -binary -text -aes256 -in file.txt -out file.txt.enc" -outform DER mysqldump-secure.pub.pem
#
# * How to decrypt? (privkey)
#    openssl smime -decrypt -in file.txt.enc -binary -inform DEM -inkey mysqldump-secure.priv.pem -out file.txt


# Encrypt database dumps?
#
# Values:
# -------
# 1: Encrypt
# 0: Do not encrypt
#
# NOTE: No default value!
#       If $ENCRYPT is not set or has a wrong value,
#       mysqldump-secure will abort.
#
ENCRYPT=0


#
# OpenSSL Public key in PEM format without passphrase!
#
# WARN: Only the public key is required for dumping.
#       The private key should be kept somewhere safe.
#       Best case on a different machine.
#       The private key is only required for decrypting.
#
# NOTE: See bundled 'create-keypair.sh' to generate a
#       public/private keypair.
#
# NOTE: Only applicable if ENCRYPT = 1
#
# NOTE: No default value!
#       If $ENCRYPT is enabled and the pubkey is not found,
#       mysqldump-secure will abort.
#
#       If the pubkey is invalid, mysqldump-secure will encounter
#       errors on processing the dump before writing to disk.
#       All errors are outputted.
OPENSSL_PUBKEY_PEM="/etc/mysqldump-secure.pub.pem"


#
# OpenSSL symmetric encryption algorithm.
#
# NOTE: Only applicable if ENCRYPT = 1
#
# Must be valid openssl encryption algorithm
#
# Default value: "-aes256"
OPENSSL_ALGO_ARG="-aes256"




# There is a Bug in OpenSSL's SMIME implementation
# for files larger than about 1.5 GB. The final output
# will be truncated at 1.9 GB and the file won't be able to
# be decrypted.
# mysqldump-secure will warn, once the database is larger than
# 1200 MB just to make sure.
# If you are really sure about what you are doing, you can disabled
# this warning here.
ENABLE_SMIME_BUG_WARNING=1


############################################################
# (OPT) Automatic deletions (tmpwatch/tmpreaper)
############################################################

#
# This relies completely on tmpwatch/tmpreamer and will delete all files recursively
# which modification time is older than X hours.
# tmpwatch/tmpreaper behavior applies:
#  * no symbolic links
#  * recursive
# @required   tmpwatch
#
# Command parsed to tmpwatch/tmpreaper
#
# tmpwatch -m ${DELETE_IF_OLDER} -v ${DUMP_DIR}/
# tmpreaper -m ${DELETE_IF_OLDER} -v ${DUMP_DIR}/
#

# Delete old files
# 1: yes
# 0: no (Default)
DELETE=0


# Choose the binary to use for deletion
# Possible values:
# * tmpwatch
# * tmpreaper
DELETE_METHOD="tmpwatch"



# Force deletion for read-only files.
# If your $DUMP_FILE_CHMOD is set to create read-only database dumps,
# tmpwatch/tmpreader will not be able to delete those files, unless you
# specify to force it via -f (--force)
#
# From manpage:
# Remove files even if EUID doesn’t have write access.
# Normally, files owned by the current EUID, with no write bit set are not removed.
DELETE_FORCE=0


# Only applicable of DELETE = 1
# Delete all files recursively which modification time (mtime)
# is older than this
# e.g.
# DELETE_IF_OLDER=720	# 30 days
#
# All valid tmpwatch/tmpreaper value-units are allowed.
# * "No unit" defaults to hours (see `man tmpwatch` or `man tmpreaper`)
# * m: minutes
# * h: hours
# * d: days
#
# Example
# * DELETE_IF_OLDER=3m  # older than 3 minutes
# * DELETE_IF_OLDER=3h  # older than 3 hours
# * DELETE_IF_OLDER=3d  # older than 3 days
# * DELETE_IF_OLDER=3   # older than 3 hours
#
DELETE_IF_OLDER=30d		# older than 30 days



############################################################
# (OPT) Nagios Plugin Log
############################################################

# Enable separate logfile which can be parsed by check_mysqldump-secure
# in order to report success/warn/error state to nagios server
# The logfile is in classic .ini file format and must be readable by the
# nagios user.

# Enable Nagios Logfile
# 1: yes
# 0: no (Default)
NAGIOS_LOG=1

# Only applicable if NAGIOS_LOG = 1
#
NAGIOS_LOG_FILE="/var/log/mysqldump-secure.nagios.log"

# File permission of Nagios log.
# NOTE: A 'nagios user' should be able to read the file.
NAGIOS_LOG_CHMOD="0644"




############################################################
# (OPT) Info file
############################################################


# Write info file for dumps?
#
# The info file will contain various information about the dump:
#   * Date, time, filename, filesize, md5 hash
#   * Database name, size in database
#   * Applied mysqldump options
#   * Compressed?, encrypted?
#   * Table count, table engines
#   * Server info
#
# It is used to later verify your backups and/or quickly see
# what is inside and how and from where it has been dumped.
# (WIP: mysqldump-secure --validate)
#
# This information will also be used for
# (the current under development) 'mysqlimport-secure' to
# easily list all dumps and choose which one to quickly re-import.
# (WIP: mysqlimport-secure)
#
# chmod:
# ------
# It will use the same chmod settings as
# the dump file itself. This way it will be deleted via tmpwatch/tmpreaper
# at the same time as the dump itself. (hint: `--force` option)
#
# Filename:
# ---------
# The info file will have the same name as the corresponding dump
# with '.info' suffixed.
#
# Values:
# -------
# 1: Enabled
# 0: Disabled (Default)
DUMP_FILE_INFO=1





################################################################################
#
#  5.   M I S C
#
################################################################################

############################################################
# Temporary system directory
############################################################


# Temporary system directory.
# This should normally not be changed as /tmp
# is the default on most systems.
#
# The tmp folder is used to store files which hold stderr as well as
# stdout of mysqldump, openssl and the used compression tool.
#
# All tmp files will be deleted at the end of every run.
#
# NOTE: If the directory does not exist
#       or the directory is not writeable,
#       mysqldump-secure will abort.
#
# Default value: "/tmp"
TMP_DIR="/tmp"