Skip to content

Latest commit

 

History

History
60 lines (44 loc) · 1.54 KB

flashing.md

File metadata and controls

60 lines (44 loc) · 1.54 KB
Raw

Flashing firmware

Internal programmer

Use this method for flashing a system already running System76 EC.

This will trigger a watchdog reset causing the system to immediately power off. OS data may be lost or corrupted as a result. Save and close all applications before flashing.

make BOARD=<vendor>/<model> flash_internal

External programmer

Use this method for:

  • flashing from proprietary firmware to System76 EC firmware
  • flashing without risking loss of OS data
  • flashing a bricked controller

This requires:

  • A configured Mega 2560: For programming the EC itself
  • A USB cable: For creating a common ground and providing power
    • USB-C is recommended, but USB-A will work as well
  • A second computer: For building and flashing the firmware

The system must not have any power!

  1. Turn off the laptop
  2. Unplug the AC adapter
  3. Remove the bottom panel
  4. Disconnect the battery
  5. Disconnect the keyboard from its port
  6. Replace the bottom panel and flip the laptop back over
  7. Connect the USB cable from the laptop to the host machine
  8. Connect the Mega 2560 to the host machine
  9. Attach the programmer to the keyboard port
  10. Flash the firmware
make BOARD=<vendor>/<model> flash_external

One of the first things it does is read the EC ID and version. If working, the ID will be the EC model the machine uses.

ID: 5570 VER: 2
ID: 8587 VER: 6

Any other values means that the Mega 2560 is misconfigured or the FPC is not seated correctly. E.g., this is wrong:

ID: FF7F VER: 127