this page should give an overview of available features. I could not test all features, because I do not have the appropriate hardware / software.
All the desired features must be activated in the configuration file
[SMA-EM]
# list of features to load/run
features=simplefswriter nextfeature
Each feature has it own configuration section in the configuration-file.
[FEATURE-featurename]
please have a look at the config.sample file or have a look at the features file (description) for supported configuration options.
[FEATURE-simplefswriter]
# list serials simplefswriter notice
serials=1900204522
# measurement vars simplefswriter should write to filesystem (only from smas with serial in serials)
values=pconsume psupply qsupply ssupply
Feature fist
send SMA-measurement-values to domoticz.
send SMA-measurement-values to an influxdb.
send SMA-measurement-values to an mqtt broker.
read sma inverter values via modbus.
read kostal piko inverter values via http/json.
allow remote debug with PyCharm.
a sample file; how to start writing a feature
writes configureable measurement-values to the filesystem
example grafana configuration to display SAM-measurement-values stored in influxdb
sma modbus library (required for pvdata.py)
send SMA-measurement-values to symcon
symcon webhook (required for symcon.py)
symcon webhook (required for symcon.py)
send SMA-measurement-values to an influxdb2.
get power consumption values of Edimax smartplugs