We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
David,
On the RADDS board only the min stops are defiined. This:
http://doku.radds.org/wp-content/uploads/2018/02/RADDS_DUE_PINS.png
shows the endstop pins to be:
X_min 28 Y_min 30 Z_min 32 X_max 34 Y_max 36 Z_max 38
Can you please add this in your next point release? I have a z max endstop and an trying to probe the bed with your z probe.
The text was updated successfully, but these errors were encountered:
Also why is pwm3 listed as an endstop? Seems weird to me.
Sorry, something went wrong.
Is RADDS supported by dc42 fork?
See section "Supported hardware" at https://github.com/dc42/RepRapFirmware/blob/dev/README.md.
I don't know. I didn't do the RADDS port.
No branches or pull requests
David,
On the RADDS board only the min stops are defiined. This:
http://doku.radds.org/wp-content/uploads/2018/02/RADDS_DUE_PINS.png
shows the endstop pins to be:
X_min 28
Y_min 30
Z_min 32
X_max 34
Y_max 36
Z_max 38
Can you please add this in your next point release? I have a z max endstop and an trying to probe the bed with your z probe.
The text was updated successfully, but these errors were encountered: