Problem Description
This case simulates combustion inside a constant volume chamber based on an experimental setup at RWTH Aachen University. It can mimic, for example, the beginning of power stroke in a four-stroke diesel engine.
Operating Conditions in Brief| Chamber size (xyz) | 0.02×0.1×0.02m^3 |
| Initial Gas Temperature | 800K |
| Initial Gas Pressure | 5MPa |
| Initial Gas Composition (mass fraction) | 23.4% O2, 76.6% N2 |
| Fuel | n-heptane |
| Fuel Temperature at the Nozzle | 320K |
| Fuel Injection Duration | 1.25ms |
| Total Injection Mass | 6mg |
Configurations Different from OpenFOAM Case
Cantera is used instead of the built-in modules of OpenFOAM to solve the chemical reactions. Therefore, a chemical mechanism file in YAML format is required in the case directory, and the full name of the mechanism file ("xxx. yaml") should be the entry after the keyword CanteraMechanismFile in constant/CanteraTorchProperties. Non-reacting simulation can be conducted by switching the entry after the keyword chemistry from on to off in constant/CanteraTorchProperties.
Results
Problem Description
A 2D-wedge case is used to simulate the dilute spray combustion processes inside a spray burner based on the experimental setup at Sydney University. It has been widely used for the study of droplet-chemistry-turbulence interaction.
Operating Conditions in Brief (Details can be found for Case EtF4 in [1] )| Chamber size (wedge, 4 degree) | 0.104×0.500m^2 |
| Initial Gas Temperature in Domain | 293K |
| Initial Gas Temperature at Fuel Inlet | 267K |
| Initial Gas Temperature at Pilot Inlet | 2493K |
| Initial Gas Pressure | 1Bar |
| Initial Gas Composition in Domain(mass fraction) | 23.4% O2, 76.6% N2 |
| Fuel | C2H5OH |
| Mass-flow Rate of Air Carrier | 150g/min |
| Liquid Fuel Injection Rate | 23.4g/min |
| Bulk Jet Velocity | 24m/s |
| Bulk Burned Pilot Velocity | 11.6m/s |
Configurations Different from OpenFOAM Case
Cantera is used instead of the built-in modules of OpenFOAM to solve the chemical reactions. Therefore, a chemical mechanism file in YAML format is required in the case directory, and the full name of the mechanism file ("xxx. yaml") should be the entry after the keyword CanteraMechanismFile in constant/CanteraTorchProperties. Non-reacting simulation can be conducted by switching the entry after the keyword chemistry from on to off in constant/CanteraTorchProperties.
Note
When running a wedge case with OpenFOAM, you may come across an error "Hitting a wedge patch should not be possible". One solution is to comment out the lines with the “FatalErrorIn” call in src/lagrangian/basic/particle/particleTemplates.C. Details can be found in the thread [2].
Results
Reference
[1] Gounder, James Dakshina, Agisilaos Kourmatzis, and Assaad Rachid Masri. "Turbulent piloted dilute spray flames: Flow fields and droplet dynamics." Combustion and flame 159.11 (2012): 3372-3397.
[2]https://www.cfd-online.com/Forums/openfoam/89003-3d-spray-vs-axisymmetric-spray-dieselfoam.html