IExchangeV3.sol

// SPDX-License-Identifier: Apache-2.0
// Copyright 2017 Loopring Technology Limited.
// Modified by DeGate DAO, 2022
pragma solidity ^0.7.0;
pragma experimental ABIEncoderV2;

import "../../lib/Claimable.sol";
import "./ExchangeData.sol";

/// @title IExchangeV3
/// @dev Note that Claimable and RentrancyGuard are inherited here to
///      ensure all data members are declared on IExchangeV3 to make it
///      easy to support upgradability through proxies.
///
///      Subclasses of this contract must NOT define constructor to
///      initialize data.
///
/// @author Brecht Devos - <brecht@loopring.org>
/// @author Daniel Wang  - <daniel@loopring.org>
abstract contract IExchangeV3 is Claimable
{
    // -- Events --

    event ExchangeCloned(
        address exchangeAddress,
        address owner,
        bytes32 genesisMerkleRoot
    );

    event TokenRegistered(
        address token,
        uint32  tokenId
    );

    event Shutdown(
        uint timestamp
    );

    event WithdrawalModeActivated(
        uint timestamp
    );

    event BlockSubmitted(
        uint    indexed blockIdx,
        bytes32         merkleRoot,
        bytes32         publicDataHash
    );

    event DepositRequested(
        address from,
        address to,
        address token,
        uint32  tokenId,
        uint248  amount
    );

    event ForcedWithdrawalRequested(
        address owner,
        address token,
        uint32  accountID
    );

    event WithdrawalCompleted(
        uint8   category,
        address from,
        address to,
        address token,
        uint    amount
    );

    event WithdrawalFailed(
        uint8   category,
        address from,
        address to,
        address token,
        uint    amount
    );

    event ProtocolFeesUpdated(
        uint16 protocolFeeBips,
        uint16 previousProtocolFeeBips
    );

    event TransactionApproved(
        address owner,
        bytes32 transactionHash
    );

    event TransactionsApproved(
        address[] owners,
        bytes32[] transactionHashes
    );

    event BlockVerifierRefreshed(address blockVerifier);
    event DepositContractUpdate(address depositContract);
    event WithdrawExchangeFees(address token, address recipient);

    event WithdrawalRecipientUpdate(
        address from,
        address to,
        address token,
        uint248 amount,
        uint32 storageID,
        address newRecipient
    );

    event DepositParamsUpdate(
        uint256 freeDepositMax,
        uint256 freeDepositRemained,
        uint256 freeSlotPerBlock,
        uint256 depositFee
    );

    event AllowOnchainTransferFrom(bool value);

    // -- Initialization --
    /// @dev Initializes this exchange. This method can only be called once.
    /// @param  loopring The LoopringV3 contract address.
    /// @param  owner The owner of this exchange.
    /// @param  genesisMerkleRoot The initial Merkle tree state.
    /// @param  genesisMerkleAssetRoot The initial Asset Merkle tree state.
    function initialize(
        address loopring,
        address owner,
        bytes32 genesisMerkleRoot,
        bytes32 genesisMerkleAssetRoot
        )
        virtual
        external;

    ///      Can only be called by the exchange owner once.
    /// @param depositContract The deposit contract to be used
    function setDepositContract(address depositContract)
        external
        virtual;

    /// @dev Gets the deposit contract used by the exchange.
    /// @return the deposit contract
    function getDepositContract()
        external
        virtual
        view
        returns (IDepositContract);

    // @dev Exchange owner set params for deposit.
    // @param freeDepositMax Max slots for free deposit
    // @param freeDepositRemained Remained free deposit
    // @param freeSlotPerBlock Free slot for every block
    // @param depositFee Deposit fee in ETH
    function setDepositParams(
        uint256 freeDepositMax,
        uint256 freeDepositRemained,
        uint256 freeSlotPerBlock,
        uint256 depositFee
    ) external virtual;

    // @dev Exchange owner withdraws fees from the exchange.
    // @param token Fee token address
    // @param feeRecipient Fee recipient address
    function withdrawExchangeFees(
        address token,
        address feeRecipient
        )
        external
        virtual;

    // -- Constants --
    /// @dev Returns a list of constants used by the exchange.
    /// @return constants The list of constants.
    function getConstants()
        external
        virtual
        pure
        returns(ExchangeData.Constants memory);

    // -- Mode --
    /// @dev Returns hether the exchange is in withdrawal mode.
    /// @return Returns true if the exchange is in withdrawal mode, else false.
    function isInWithdrawalMode()
        external
        virtual
        view
        returns (bool);

    /// @dev Returns whether the exchange is shutdown.
    /// @return Returns true if the exchange is shutdown, else false.
    function isShutdown()
        external
        virtual
        view
        returns (bool);

    // -- Tokens --
    /// @dev Registers an ERC20 token for a token id. Note that different exchanges may have
    ///      different ids for the same ERC20 token.
    ///
    ///      Please note that 1 is reserved for Ether (ETH), 2 is reserved for Wrapped Ether (ETH),
    ///      and 3 is reserved for Loopring Token (LRC).
    ///
    ///      This function is only callable by the exchange owner.
    ///
    /// @param  tokenAddress The token's address
    /// @return tokenID The token's ID in this exchanges.
    function registerToken(
        address tokenAddress
        )
        external
        virtual
        returns (uint32 tokenID);

    /// @dev Returns the id of a registered token.
    /// @param  tokenAddress The token's address
    /// @return tokenID The token's ID in this exchanges.
    function getTokenID(
        address tokenAddress
        )
        external
        virtual
        view
        returns (uint32 tokenID);

    /// @dev Returns the address of a registered token.
    /// @param  tokenID The token's ID in this exchanges.
    /// @return tokenAddress The token's address
    function getTokenAddress(
        uint32 tokenID
        )
        external
        virtual
        view
        returns (address tokenAddress);

    // -- Stakes --
    /// @dev Gets the amount of LRC the owner has staked onchain for this exchange.
    ///      The stake will be burned if the exchange does not fulfill its duty by
    ///      processing user requests in time. Please note that order matching may potentially
    ///      performed by another party and is not part of the exchange's duty.
    ///
    /// @return The amount of LRC staked
    function getExchangeStake()
        external
        virtual
        view
        returns (uint);

    /// @dev Withdraws the amount staked for this exchange.
    ///      This can only be done if the exchange has been correctly shutdown:
    ///      - The exchange owner has shutdown the exchange
    ///      - All deposit requests are processed
    ///      - All funds are returned to the users (merkle root is reset to initial state)
    ///
    ///      Can only be called by the exchange owner.
    ///
    /// @return amountLRC The amount of LRC withdrawn
    function withdrawExchangeStake(
        address recipient
        )
        external
        virtual
        returns (uint amountLRC);

    /// @dev Can by called by anyone to burn the stake of the exchange when certain
    ///      conditions are fulfilled.
    ///
    ///      Currently this will only burn the stake of the exchange if
    ///      the exchange is in withdrawal mode.
    function burnExchangeStake()
        external
        virtual;

    // -- Blocks --

    /// @dev Gets the current Merkle root of this exchange's virtual blockchain.
    /// @return The current Merkle root.
    function getMerkleRoot()
        external
        virtual
        view
        returns (bytes32);

    /// @dev Gets the current Asset Merkle root of this exchange's virtual blockchain.
    /// @return The current Asset Merkle root.
    function getMerkleAssetRoot()
        external
        virtual
        view
        returns (bytes32);

    /// @dev Gets the height of this exchange's virtual blockchain. The block height for a
    ///      new exchange is 1.
    /// @return The virtual blockchain height which is the index of the last block.
    function getBlockHeight()
        external
        virtual
        view
        returns (uint);

    /// @dev Gets some minimal info of a previously submitted block that's kept onchain.
    ///      A DEX can use this function to implement a payment receipt verification
    ///      contract with a challange-response scheme.
    /// @param blockIdx The block index.
    function getBlockInfo(uint blockIdx)
        external
        virtual
        view
        returns (ExchangeData.BlockInfo memory);

    /// @dev Sumbits new blocks to the rollup blockchain.
    ///
    ///      This function can only be called by the exchange operator.
    ///
    /// @param blocks The blocks being submitted
    ///      - blockType: The type of the new block
    ///      - blockSize: The number of onchain or offchain requests/settlements
    ///        that have been processed in this block
    ///      - blockVersion: The circuit version to use for verifying the block
    ///      - storeBlockInfoOnchain: If the block info for this block needs to be stored on-chain
    ///      - data: The data for this block
    ///      - offchainData: Arbitrary data, mainly for off-chain data-availability, i.e.,
    ///        the multihash of the IPFS file that contains the block data.
    function submitBlocks(ExchangeData.Block[] calldata blocks)
        external
        virtual;

    /// @dev Gets the number of available forced request slots.
    /// @return The number of available slots.
    function getNumAvailableForcedSlots()
        external
        virtual
        view
        returns (uint);

    // -- Deposits --

    /// @dev Deposits Ether or ERC20 tokens to the specified account.
    ///
    ///      This function is only callable by an agent of 'from'.
    ///
    ///      A fee to the owner is paid in ETH to process the deposit.
    ///      The operator is not forced to do the deposit and the user can send
    ///      any fee amount.
    ///
    /// @param from The address that deposits the funds to the exchange
    /// @param to The account owner's address receiving the funds
    /// @param tokenAddress The address of the token, use `0x0` for Ether.
    /// @param amount The amount of tokens to deposit
    /// @param auxiliaryData Optional extra data used by the deposit contract
    function deposit(
        address from,
        address to,
        address tokenAddress,
        uint248  amount,
        bytes   calldata auxiliaryData
        )
        external
        virtual
        payable;

    /// @dev Gets the amount of tokens that may be added to the owner's account.
    /// @param owner The destination address for the amount deposited.
    /// @param tokenAddress The address of the token, use `0x0` for Ether.
    /// @return The amount of tokens pending.
    function getPendingDepositAmount(
        address owner,
        address tokenAddress
        )
        external
        virtual
        view
        returns (uint248);

    // -- Withdrawals --
    /// @dev Submits an onchain request to force withdraw Ether or ERC20 tokens.
    ///      This request always withdraws the full balance.
    ///
    ///      This function is only callable by an agent of the account.
    ///
    ///      The total fee in ETH that the user needs to pay is 'withdrawalFee'.
    ///      If the user sends too much ETH the surplus is sent back immediately.
    ///
    ///      Note that after such an operation, it will take the owner some
    ///      time (no more than MAX_AGE_FORCED_REQUEST_UNTIL_WITHDRAW_MODE) to process the request
    ///      and create the deposit to the offchain account.
    ///
    /// @param owner The expected owner of the account
    /// @param tokenAddress The address of the token, use `0x0` for Ether.
    /// @param accountID The address the account in the Merkle tree.
    function forceWithdraw(
        address owner,
        address tokenAddress,
        uint32  accountID
        )
        external
        virtual
        payable;

    /// @dev Checks if a forced withdrawal is pending for an account balance.
    /// @param  accountID The accountID of the account to check.
    /// @param  token The token address
    /// @return True if a request is pending, false otherwise
    function isForcedWithdrawalPending(
        uint32  accountID,
        address token
        )
        external
        virtual
        view
        returns (bool);

    /// @dev Gets the time the protocol fee for a token was last withdrawn.
    /// @param tokenAddress The address of the token, use `0x0` for Ether.
    /// @return The time the protocol fee was last withdrawn.
    function getProtocolFeeLastWithdrawnTime(
        address tokenAddress
        )
        external
        virtual
        view
        returns (uint);

    /// @dev Allows anyone to withdraw funds for a specified user using the balances stored
    ///      in the Merkle tree. The funds will be sent to the owner of the acount.
    ///
    ///      Can only be used in withdrawal mode (i.e. when the owner has stopped
    ///      committing blocks and is not able to commit any more blocks).
    ///
    ///      This will NOT modify the onchain merkle root! The merkle root stored
    ///      onchain will remain the same after the withdrawal. We store if the user
    ///      has withdrawn the balance in State.withdrawnInWithdrawMode.
    ///
    /// @param  merkleProof The Merkle inclusion proof
    function withdrawFromMerkleTree(
        ExchangeData.MerkleProof calldata merkleProof
        )
        external
        virtual;

    /// @dev Checks if the balance for the account was withdrawn with `withdrawFromMerkleTree`.
    /// @param  accountID The accountID of the balance to check.
    /// @param  token The token address
    /// @return True if it was already withdrawn, false otherwise
    function isWithdrawnInWithdrawalMode(
        uint32  accountID,
        address token
        )
        external
        virtual
        view
        returns (bool);

    /// @dev Allows withdrawing funds deposited to the contract in a deposit request when
    ///      it was never processed by the owner within the maximum time allowed.
    ///
    ///      Can be called by anyone. The deposited tokens will be sent back to
    ///      the owner of the account they were deposited in.
    ///
    /// @param  owner The address of the account the withdrawal was done for.
    /// @param  token The token address
    function withdrawFromDepositRequest(
        address owner,
        address token
        )
        external
        virtual;

    /// @dev Allows withdrawing funds after a withdrawal request (either onchain
    ///      or offchain) was submitted in a block by the operator.
    ///
    ///      Can be called by anyone. The withdrawn tokens will be sent to
    ///      the owner of the account they were withdrawn out.
    ///
    ///      Normally it is should not be needed for users to call this manually.
    ///      Funds from withdrawal requests will be sent to the account owner
    ///      immediately by the owner when the block is submitted.
    ///      The user will however need to call this manually if the transfer failed.
    ///
    ///      Tokens and owners must have the same size.
    ///
    /// @param  owners The addresses of the account the withdrawal was done for.
    /// @param  tokens The token addresses
    function withdrawFromApprovedWithdrawals(
        address[] calldata owners,
        address[] calldata tokens
        )
        external
        virtual;

    /// @dev Gets the amount that can be withdrawn immediately with `withdrawFromApprovedWithdrawals`.
    /// @param  owner The address of the account the withdrawal was done for.
    /// @param  token The token address
    /// @return The amount withdrawable
    function getAmountWithdrawable(
        address owner,
        address token
        )
        external
        virtual
        view
        returns (uint);

    /// @dev Notifies the exchange that the owner did not process a forced request.
    ///      If this is indeed the case, the exchange will enter withdrawal mode.
    ///
    ///      Can be called by anyone.
    ///
    /// @param  accountID The accountID the forced request was made for
    /// @param  token The token address of the the forced request
    function notifyForcedRequestTooOld(
        uint32  accountID,
        address token
        )
        external
        virtual;

    /// @dev Allows a withdrawal to be done to an adddresss that is different
    ///      than initialy specified in the withdrawal request. This can be used to
    ///      implement functionality like fast withdrawals.
    ///
    ///      This function can only be called by an agent.
    ///
    /// @param from The address of the account that does the withdrawal.
    /// @param to The address to which 'amount' tokens were going to be withdrawn.
    /// @param token The address of the token that is withdrawn ('0x0' for ETH).
    /// @param amount The amount of tokens that are going to be withdrawn.
    /// @param storageID The storageID of the withdrawal request.
    /// @param newRecipient The new recipient address of the withdrawal.
    function setWithdrawalRecipient(
        address from,
        address to,
        address token,
        uint248  amount,
        uint32  storageID,
        address newRecipient
        )
        external
        virtual;

    /// @dev Gets the withdrawal recipient.
    ///
    /// @param from The address of the account that does the withdrawal.
    /// @param to The address to which 'amount' tokens were going to be withdrawn.
    /// @param token The address of the token that is withdrawn ('0x0' for ETH).
    /// @param amount The amount of tokens that are going to be withdrawn.
    /// @param storageID The storageID of the withdrawal request.
    function getWithdrawalRecipient(
        address from,
        address to,
        address token,
        uint248  amount,
        uint32  storageID
        )
        external
        virtual
        view
        returns (address);

    /// @dev Allows an agent to transfer ERC-20 tokens for a user using the allowance
    ///      the user has set for the exchange. This way the user only needs to approve a single exchange contract
    ///      for all exchange/agent features, which allows for a more seamless user experience.
    ///
    ///      This function can only be called by an agent.
    ///
    /// @param from The address of the account that sends the tokens.
    /// @param to The address to which 'amount' tokens are transferred.
    /// @param token The address of the token to transfer (ETH is and cannot be suppported).
    /// @param amount The amount of tokens transferred.
    function onchainTransferFrom(
        address from,
        address to,
        address token,
        uint    amount
        )
        external
        virtual;

    /// @dev Allows an agent to approve a rollup tx.
    ///
    ///      This function can only be called by an agent.
    ///
    /// @param owner The owner of the account
    /// @param txHash The hash of the transaction
    function approveTransaction(
        address owner,
        bytes32 txHash
        )
        external
        virtual;

    /// @dev Allows an agent to approve multiple rollup txs.
    ///
    ///      This function can only be called by an agent.
    ///
    /// @param owners The account owners
    /// @param txHashes The hashes of the transactions
    function approveTransactions(
        address[] calldata owners,
        bytes32[] calldata txHashes
        )
        external
        virtual;

    /// @dev Checks if a rollup tx is approved using the tx's hash.
    ///
    /// @param owner The owner of the account that needs to authorize the tx
    /// @param txHash The hash of the transaction
    /// @return True if the tx is approved, else false
    function isTransactionApproved(
        address owner,
        bytes32 txHash
        )
        external
        virtual
        view
        returns (bool);

    // -- Admins --
    /// @dev Sets the max time deposits have to wait before becoming withdrawable.
    /// @param newValue The new value.
    /// @return  The old value.
    function setMaxAgeDepositUntilWithdrawable(
        uint32 newValue
        )
        external
        virtual
        returns (uint32);

    /// @dev Returns the max time deposits have to wait before becoming withdrawable.
    /// @return The value.
    function getMaxAgeDepositUntilWithdrawable()
        external
        virtual
        view
        returns (uint32);

    /// @dev Shuts down the exchange.
    ///      Once the exchange is shutdown all onchain requests are permanently disabled.
    ///      When all requirements are fulfilled the exchange owner can withdraw
    ///      the exchange stake with withdrawStake.
    ///
    ///      Note that the exchange can still enter the withdrawal mode after this function
    ///      has been invoked successfully. To prevent entering the withdrawal mode before the
    ///      the echange stake can be withdrawn, all withdrawal requests still need to be handled
    ///      for at least MIN_TIME_IN_SHUTDOWN seconds.
    ///
    ///      Can only be called by the exchange owner.
    ///
    /// @return success True if the exchange is shutdown, else False
    function shutdown()
        external
        virtual
        returns (bool success);

    /// @dev Gets the protocol fees for this exchange.
    /// @return syncedAt The timestamp the protocol fees were last updated
    /// @return protocolFeeBips The protocol fee
    /// @return previousProtocolFeeBips The previous protocol fee
    /// @return executeTimeOfNextProtocolFeeBips The timestamp the next protocol fees will be updated
    /// @return nextProtocolFeeBips The next protocol fee
    function getProtocolFeeValues()
        external
        virtual
        view
        returns (
            uint32 syncedAt,
            uint16 protocolFeeBips,
            uint16 previousProtocolFeeBips,
            uint32 executeTimeOfNextProtocolFeeBips,
            uint16 nextProtocolFeeBips
        );

    /// @dev Gets the domain separator used in this exchange.
    function getDomainSeparator()
        external
        virtual
        view
        returns (bytes32);

    /// @dev Gets the uncomfirmed balance in DepositContract, which can be used for DepositTransaction.
    /// @param tokenAddress The address of the token, use `0x0` for Ether.
    /// @return Unconfirmed balance of the token
    function getUnconfirmedBalance(
        address tokenAddress
        )
        external
        virtual
        view
        returns (uint256);

    /// @dev Gets free deposit slots
    function getFreeDepositRemained()
        external
        virtual
        view
        returns (uint256);

    /// @dev Gets token deposit balance
    /// @param tokenAddress The address of the token, use `0x0` for Ether.
    /// @return deposit balance of the token
    function getDepositBalance(
        address tokenAddress
        )
        external
        virtual
        view
        returns (uint248);
}