- Edit the
network/ethernet_tor_input.yml
file for all S3* and S4* PowerSwitches such as S3048-ON, S4048T-ON, S4112F-ON, S4048-ON, S4048T-ON, S4112F-ON, S4112T-ON, and S4128F-ON.
Name | Default, accepted values | Required? | Purpose |
---|---|---|---|
os10_config | "interface vlan1" "exit" | required | Global configurations for the switch. |
snmp_trap_destination | optional | The trap destination IP address is the IP address of the SNMP Server where the trap will be sent. Ensure that the SNMP IP is valid. | |
snmp_community_string | public | optional | An SNMP community string is a means of accessing statistics stored within a router or other device. |
ethernet 1/1/(1-52) config | By default: Port description is provided. Each interface is set to "up" state. The fanout/breakout mode for 1/1/1 to 1/1/52 is as per the value set in the breakout_value variable. |
|
|
save_changes_to_startup | false | required | Change it to "true" only when you are certain that the updated configurations and commands are valid. WARNING: When set to "true", the startup configuration file is updated. If incorrect configurations or commands are entered, the Ethernet switches may not operate as expected. |
- When initializing a factory reset switch, the user needs to ensure DHCP is enabled and an IPv6 address is not assigned.
Running the playbook:
cd network
ansible-playbook ethernet_switch_config.yml -i inventory -e ethernet_switch_username=”” -e ethernet_switch_password=””
- Where
ethernet_switch_username
is the username used to authenticate into the switch. - The inventory file should be a list of IPs separated by newlines. Check out the switch_inventory section in Sample Files
- Where
ethernet_switch_password
is the password used to authenticate into the switch.