Skip to content

Latest commit

 

History

History
35 lines (26 loc) · 1.54 KB

README.md

File metadata and controls

35 lines (26 loc) · 1.54 KB
Raw

Juniper SRX

This pack includes Cortex XSIAM content.

Configuration on Server Side

You need to configure your Juniper SRX device to forward Syslog messages.

Perform the following in order to configure log forwarding:

  1. Log in to the Juniper SRX device CLI console.
  2. Run the below command:
set system syslog host <IP address of the remote Syslog server> any any

The instructions above set the logging with default configuration values.

Note: In order to parse the timestamp correctly, make sure that the SRX devices are configured with the default time zone (UTC). The supported time formats are:

  • yyyy-MM-ddThh:mm:%E3S (2021-12-08T10:00:00.665)
  • MMM dd hh:mm:ss (Nov 10 10:00:00)

More information can be found here and here.

Collect Events from Vendor

In order to use the collector, use the Broker VM option.

Broker VM

You will need to use the information described here.
You can configure the specific vendor and product for this instance.

  1. Navigate to Settings -> Configuration -> Data Broker -> Broker VMs.
  2. Right-click, and select Syslog Collector -> Configure.
  3. When configuring the Syslog Collector, set:
    • vendor as vendor<- juniper
    • product as product<- srx