GPX navigation track (offline) #250
Replies: 2 comments 1 reply
-
@0709wiwiwi thanks for the document! BRouter also now uses the gpx navigation track format in the calculated route responses. BRouter wesbite provides the gpx navigation track format in the export:
So we can design routes on BRouter website, import the gpx offline in Cruiser and start navigation! |
Beta Was this translation helpful? Give feedback.
-
The gpx navigation track contains the basic functions without gpx extensions. |
Beta Was this translation helpful? Give feedback.
-
Gpx navigation track by a gpx 1.1 conform file.
The gpx navigation track mode exclusively used in Cruiser and Locus is still hardly known.
Therefore, I share in the attached pdf how simple a gpx navigation track is put together.
Even with Notepad ++ you can modify or tune a navigation track if you should want to.
Composition of a gpx navigation track.pdf
Expressions in gpx.
(wpt) waypoints. (Waypoints are solo players)
Indicates the location of a SINGLE point of interest.
Waypoints added in an (rte) ROUTE are PROMOTED into (rtept) ROUTEPOINTS.
(rte) route with (rtept) routepoints. (Routepoints are group players)
A route contains consecutive via or shaping routepoints.
In navigation the via variant is announced while the shaping variant is muted.
The routepoints are those locations you definitely want to pass nearby.
The router than determines by which roads these locations are reached.
(trk) track with (trkpt) trackpoints. (Trackpoints are mass players)
A track contains multiple trackpoints calculated by the router.
A track to follow is accurately trackable due to its high trackpoint density.
Extra. (Locus & Cruiser)
The shaping or via point name is attached in the trackpoint name.
The streetname is attached in the trackpoint cmt.
The tracksection route profile is attached in the trackpoint src.
The turn instruction is attached in the trackpoint sym.
The shaping or via point is attached in the trackpoint type.
Beta Was this translation helpful? Give feedback.
All reactions