Skip to content

Latest commit

 

History

History
138 lines (84 loc) · 7.69 KB

day27.md

File metadata and controls

138 lines (84 loc) · 7.69 KB
title published description tags cover_image canonical_url id
#90DaysOfDevOps - Getting Hands-On with Python & Network - Day 27
false
90DaysOfDevOps - Getting Hands-On with Python & Network
devops, 90daysofdevops, learning
1048735

Getting Hands-On with Python & Network

In this final section of Networking fundamentals, we are going to cover some automation tasks and tools with our lab environment created on Day 26

We will be using an SSH tunnel to connect to our devices from our client vs telnet. The SSH tunnel created between client and device is encrypted. We also covered SSH in the Linux section on Day 18

Access our virtual emulated environment

For us to interact with our switches we either need a workstation inside the EVE-NG network or you can deploy a Linux box there with Python installed to perform your automation (Resource for setting up Linux inside EVE-NG) or you can do something like me and define a cloud for access from your workstation.

To do this, we have right-clicked on our canvas and we have selected network and then selected "Management(Cloud0)" this will bridge out to our home network.

However, we do not have anything inside this network so we need to add connections from the new network to each of our devices. (My networking knowledge needs more attention and I feel that you could just do this next step to the top router and then have connectivity to the rest of the network through this one cable?)

I have then logged on to each of our devices and I have run through the following commands for the interfaces applicable to where the cloud comes in.

enable
config t
int gi0/0
IP add DHCP 
no sh 
exit 
exit
sh ip int br

The final step gives us the DHCP address from our home network. My device network list is as follows:

Node IP Address Home Network IP
Router 10.10.88.110 192.168.169.115
Switch1 10.10.88.111 192.168.169.178
Switch2 10.10.88.112 192.168.169.193
Switch3 10.10.88.113 192.168.169.125
Switch4 10.10.88.114 192.168.169.197

SSH to a network device

With the above in place, we can now connect to our devices on our home network using our workstation. I am using Putty but also have access to other terminals such as git bash that give me the ability to SSH to our devices.

Below you can see we have an SSH connection to our router device. (R1)

Using Python to gather information from our devices

The first example of how we can leverage Python is to gather information from all of our devices and in particular, I want to be able to connect to each one and run a simple command to provide me with interface configuration and settings. I have stored this script here netmiko_con_multi.py

Now when I run this I can see each port configuration over all of my devices.

This could be handy if you have a lot of different devices, create this one script so that you can centrally control and understand quickly all of the configurations in one place.

Using Python to configure our devices

The above is useful but what about using Python to configure our devices, in our scenario we have a trunked port between SW1 and SW2 again imagine if this was to be done across many of the same switches we want to automate that and not have to manually connect to each switch to make the configuration change.

We can use netmiko_sendchange.py to achieve this. This will connect over SSH and perform that change on our SW1 which will also change to SW2.

Now for those that look at the code, you will see the message appears and tells us sending configuration to device but there is no confirmation that this has happened we could add additional code to our script to perform that check and validation on our switch or we could modify our script before to show us this. netmiko_con_multi_vlan.py

backing up your device configurations

Another use case would be to capture our network configurations and make sure we have those backed up, but again we don't want to be connecting to every device we have on our network so we can also automate this using backup.py. You will also need to populate the backup.txt with the IP addresses you want to backup.

Run your script and you should see something like the below.

That could be me just writing a simple print script in python so I should show you the backup files as well.

Paramiko

A widely used Python module for SSH. You can find out more at the official GitHub link here

We can install this module using the pip install paramiko command.

We can verify the installation by entering the Python shell and importing the paramiko module.

Netmiko

The netmiko module targets network devices specifically whereas paramiko is a broader tool for handling SSH connections overall.

Netmiko which we have used above alongside paramiko can be installed using pip install netmiko

Netmiko supports many network vendors and devices, you can find a list of supported devices on the GitHub Page

Other modules

It is also worth mentioning a few other modules that we have not had the chance to look at but they give a lot more functionality when it comes to network automation.

netaddr is used for working with and manipulating IP addresses, again the installation is simple with pip install netaddr

you might find yourself wanting to store a lot of your switch configuration in an excel spreadsheet, the xlrd will allow your scripts to read the excel workbook and convert rows and columns into a matrix. pip install xlrd to get the module installed.

Some more use cases where network automation can be used that I have not had the chance to look into can be found here

I think this wraps up our Networking section of the #90DaysOfDevOps, Networking is one area that I have not touched for a while really and there is so much more to cover but I am hoping between my notes and the resources shared throughout it is helpful for some.

Resources

Most of the examples I am using here as I am not a Network Engineer have come from this extensive book which is not free but I am using some of the scenarios to help understand Network Automation.

See you on Day 28 where will start looking into cloud computing and get a good grasp and foundational knowledge of the topic and what is available.