imx6qp-ccimx6qpsbc-id160.dts

/*
 * Copyright 2017,2018 Digi International Inc.
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */

/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
/* i.MX6 QuadPlus CPU */
#include "imx6qp.dtsi"
/* ConnectCore 6 QuadPlus (wireless/bluetooth variant) */
#include "imx6qp-ccimx6-wb.dtsi"
/* ConnectCore 6 QuadPlus SBC carrier board */
#include "imx6qp-ccimx6qpsbc.dtsi"

&audmux {
	status = "okay";
};

&caam_keyblob {
	status = "okay";
};

&can1 {
	status = "okay";
};

&can2 {
	status = "okay";
};

&codec_power {
	status = "okay";
};

&ecspi1 {
	status = "okay";

	/*
	 * Add your slave devices here. Next is an example of spidev.
	 */
	spidev@0 {
		reg = <0>;
		compatible = "rohm,dh2228fv";
		spi-max-frequency = <4000000>;
	};
};

&fec {
	status = "okay";
};

&hdmi_core {
	status = "okay";
};

&hdmi_video {
	status = "okay";
};

&hdmi_audio {
	status = "okay";
};

&i2c3 {
	status = "okay";

	edid@50 {
		status = "okay";
	};

	/* Uncomment to enable the fusion touch, used with hsd101pfw2 */
	//fusion@14 {
	//	status = "okay";
	//};

	goodix_touch: gt911@14 {
		status = "okay";
	};

	/* MIPI-CSI2 camera */
	ov5640_mipi: ov5640_mipi@3c {
		status = "okay";
	};

	/* Parallel camera CSI0 */
	ov5642_1: ov5642_1@5c {
		status = "okay";
	};

	sgtl5000: codec@a {
		status = "okay";
	};
};

/*
 * Parallel LCD conflicts with other interfaces:
 * IPU0:DI0 with MIPI display: comment the 'mipi_dsi' and 'mipi_dsi_reset' nodes.
 * Pad DISP0_DAT8 with PWM1: comment the 'pwm1' node.
 */
//&lcd {
//	status = "okay";
//};

&ldb {
	status = "okay";

	lvds-channel@0 {
		status = "okay";
	};
	lvds-channel@1 {
		status = "okay";
	};
};

&mipi_csi {
	status = "okay";
};

/*
 * The MIPI display conflicts with IPU0:DI0 on the parallel LCD.
 */
&mipi_dsi {
	status = "okay";
};

&mipi_dsi_reset {
	status = "okay";
};

&mxcfb1 {
	prefetch;
	status = "okay";
};

&mxcfb2 {
	prefetch;
	status = "okay";
};

&mxcfb3 {
	prefetch;
	status = "okay";
};

&mxcfb4 {
	prefetch;
	status = "okay";
};

&pre1 {
	status = "okay";
};

&pre2 {
	status = "okay";
};

&pre3 {
	status = "okay";
};

&pre4 {
	status = "okay";
};

&prg1 {
	memory-region = <&memory>;
	status = "okay";
};

&prg2 {
	memory-region = <&memory>;
	status = "okay";
};

&pcie {
	status = "okay";
};

/*
 * PWM1 uses pad DISP0_DAT8 on pin 10 of the parallel LCD connector.
 * Disable PWM1 if you want to use the parallel LCD.
 */
&pwm1 {
	status = "okay";
};

&sata {
	status = "okay";
};

&sound_hdmi {
	status = "okay";
};

&sound_sgtl5000 {
	status = "okay";
};

&ssi2 {
	status = "okay";
};

&uart1 {
	status = "okay";
};

&uart3 {
	status = "okay";
};

&uart4 {
	status = "okay";
};

&uart5 {
	status = "okay";
};

&usbh1 {
	status = "okay";
};

&usbotg {
	status = "okay";
};

&usdhc2 {
	status = "okay";
};

&v4l2_cap_0 {
	status = "okay";
};

&v4l2_cap_1 {
	status = "okay";
};

&v4l2_out {
	status = "okay";
};