discourse_defaults.conf

#
# DO NOT EDIT THIS FILE
# If you need to make changes create a file called discourse.conf in this directory with your changes
# On import this file will be imported using ERB
#

# Discourse supports multiple mechanisms for production config.
#
# 1. You can do nothing and get these defaults (not recommended, you should at least set hostname)
# 2. You can copy this file to config/discourse.conf and amend with your settings
# 3. You can pass in config from your environment, all the settings below are available.
#    Append DISCOURSE_ and upper case the setting in ENV. For example:
#    to pass in db_timeout of 200 you would use DISCOURSE_DB_TIMEOUT=200

# All settings apply to production only

# connection pool size, sidekiq is set to 5, allowing an extra 3 for bg threads
db_pool = 8

# ActiveRecord connection pool timeout in milliseconds
db_timeout = 5000

# Database connection timeout in seconds
db_connect_timeout = 5

# socket file used to access db
db_socket =

# host address for db server
# This is set to blank so it tries to use sockets first
db_host =

# host address for db server when taking a backup via `pg_dump`
# Defaults to `db_host` if not configured
db_backup_host =

# port running db server, no need to set it
db_port =

# db server port to use when taking a backup via `pg_dump`
db_backup_port = 5432

# database name running discourse
db_name = discourse

# username accessing database
db_username = discourse

# password used to access the db
db_password =

# Disallow prepared statements
# see: https://github.com/rails/rails/issues/21992
db_prepared_statements = false

# host address for db replica server
db_replica_host =

# port running replica db server, defaults to 5432 if not set
db_replica_port =

db_advisory_locks = true

# hostname running the forum
hostname = "www.example.com"

# backup hostname mainly for cdn use
backup_hostname =

# address of smtp server used to send emails
smtp_address =

# port of smtp server used to send emails
smtp_port = 25

# domain passed to smtp server
smtp_domain =

# username for smtp server
smtp_user_name =

# password for smtp server
smtp_password =

# smtp authentication mechanism
smtp_authentication = plain

# enable TLS encryption for smtp connections
smtp_enable_start_tls = true

# mode for verifying smtp server certificates
# to disable, set to 'none'
smtp_openssl_verify_mode =

# force implicit TLS as per RFC 8314 3.3
smtp_force_tls = false

# number of seconds to wait while attempting to open a SMTP connection
smtp_open_timeout = 5

# Number of seconds to wait until timing-out a SMTP read(2) call
smtp_read_timeout = 5

# load MiniProfiler in production, to be used by developers
load_mini_profiler = true

# Every how many requests should MP profile a request (aka take snapshot)
# Default is never
mini_profiler_snapshots_period = 0

# specify the URL of the destination that MiniProfiler should ship snapshots to
# mini_profiler_snapshots_transport_auth_key is required as well
mini_profiler_snapshots_transport_url =

# authorization key that will be included as a header in requests made by the
# snapshots transporter to the URL specified above. The destination should
# know this key and only accept requests that have this key in the
# `Mini-Profiler-Transport-Auth` header.
mini_profiler_snapshots_transport_auth_key =

# recommended, cdn used to access assets
cdn_url =

# The hostname used by the CDN to request assets
cdn_origin_hostname =

# comma delimited list of emails that have developer level access
developer_emails =

# redis server address
redis_host = localhost

# redis server port
redis_port = 6379

# redis replica server address
redis_replica_host =

# redis replica server port
redis_replica_port = 6379

# redis database
redis_db = 0

# redis password
redis_password =

# skip configuring client id for cloud providers who support no client commands
redis_skip_client_commands = false

# uses SSL for all Redis connections if true
redis_use_ssl = false

# message bus redis server switch
message_bus_redis_enabled = false

# message bus redis server address
message_bus_redis_host = localhost

# message bus redis server port
message_bus_redis_port = 6379

# message bus redis replica server address
message_bus_redis_replica_host =

# message bus redis slave server port
message_bus_redis_replica_port = 6379

# message bus redis database
message_bus_redis_db = 0

# message bus redis password
message_bus_redis_password =

# skip configuring client id for cloud providers who support no client commands
message_bus_redis_skip_client_commands = false

# enable Cross-origin Resource Sharing (CORS) directly at the application level
enable_cors = false
cors_origin = ''

# enable if you really need to serve assets in prod
serve_static_assets = false

# number of sidekiq workers (launched via unicorn master)
sidekiq_workers = 5

# connection reaping helps keep connection counts down, postgres
# will not work properly with huge numbers of open connections
# reap connections from pool that are older than 30 seconds
connection_reaper_age = 30

# run reap check every 30 seconds
connection_reaper_interval = 30

# set to relative URL (for subdirectory hosting)
# IMPORTANT: path must not include a trailing /
# EG: /forum
relative_url_root =

# increasing this number will increase redis memory use
# this ensures backlog (ability of channels to catch up are capped)
# message bus default cap is 1000, we are winding it down to 100
message_bus_max_backlog_size = 100

# how often the message-bus backlog should be cleared
# lower values will make memory usage more consistent, but will
# increase redis CPU demands
message_bus_clear_every = 50

# must be a 64 byte hex string, anything else will be ignored with a warning
secret_key_base =

# fallback path for all assets which are served via the application
# used by static_controller
# in multi host setups this allows you to have old unicorn instances serve
# newly compiled assets
fallback_assets_path =

# S3 settings used for serving ALL public files
# be sure to configure a CDN as well per cdn_url
s3_bucket =
s3_region =
s3_access_key_id =
s3_secret_access_key =
s3_use_iam_profile =
s3_cdn_url =
s3_endpoint =
s3_http_continue_timeout =
s3_install_cors_rule =

### rate limits apply to all sites
max_user_api_reqs_per_minute = 20
max_user_api_reqs_per_day = 2880

max_admin_api_reqs_per_minute = 60

max_reqs_per_ip_per_minute = 200
max_reqs_per_ip_per_10_seconds = 50

# applies to asset type routes (avatars/css and so on)
max_asset_reqs_per_ip_per_10_seconds = 200

# global rate limiter will simply warn if the limit is exceeded, can be warn+block, warn, block or none
max_reqs_per_ip_mode = block

# bypass rate limiting any IP resolved as a private IP
max_reqs_rate_limit_on_private = false

# use per user rate limits vs ip rate limits for users with this trust level or more.
skip_per_ip_rate_limit_trust_level = 1

# logged in DoS protection

# protection will only trigger for requests that queue longer than this amount
force_anonymous_min_queue_seconds = 1
# only trigger anon if we see more than N requests for this path in last 10 seconds
force_anonymous_min_per_10_seconds = 3

# Any requests with the headers Discourse-Background = true will not be allowed to queue
# longer than this amount of time.
# Discourse will rate limit and ask client to try again later.
background_requests_max_queue_length = 0.5

# if a message bus request queues for 100ms or longer, we will reject it and ask consumer
# to back off
reject_message_bus_queue_seconds = 0.1

# disable search if app server is queueing for longer than this (in seconds)
disable_search_queue_threshold = 1

# maximum number of posts rebaked across the cluster in the periodical job
# rebake process is very expensive, on multisite we have to make sure we never
# flood the queue
max_old_rebakes_per_15_minutes = 300

# maximum number of log messages in /logs
max_logster_logs = 1000

# during precompile update maxmind database if older than N days
# set to 0 to disable
refresh_maxmind_db_during_precompile_days = 2

# backup path containing maxmind db files
maxmind_backup_path =

# register an account at: https://www.maxmind.com/en/geolite2/signup
# then head to profile and get your license key
maxmind_license_key=

# when enabled the following headers will be added to every response:
# (note, if measurements do not exist for the header they will be omitted)
#
# X-Redis-Calls: 10
# X-Redis-Time: 1.02
# X-Sql-Calls: 102
# X-Sql-Time: 1.02
# X-Queue-Time: 1.01
enable_performance_http_headers = false

# gather JavaScript errors from clients (rate limited to 1 error per IP per minute)
enable_js_error_reporting = true

# This is probably not a number you want to touch, it controls the number of workers
# we allow mini scheduler to run. Prior to 2019 we ran a single worker.
# On extremely busy setups this could lead to situations where regular jobs would
# starve. Specifically jobs such as "run heartbeat" which keeps sidekiq running.
# Having a high number here is very low risk. Regular jobs are limited in scope and scale.
mini_scheduler_workers = 5

# enable compression on anonymous cache redis entries
# this slightly increases the cost of storing cache entries but can make it much
# cheaper to retrieve cache entries when redis is stores on a different machine to the one
# running the web
compress_anon_cache = false

# Only store entries in redis for anonymous cache if they are observed more than N times
# for a specific key
#
# This ensures there are no pathological cases where we keep storing data in anonymous cache
# never to use it, set to 1 to store immediately, set to 0 to disable anon cache
anon_cache_store_threshold = 2

# EXPERIMENTAL - not yet supported in production
# by default admins can install and amend any theme
# you may restrict it so only specific themes are approved
# in allowlist mode all theme updates must happen via git repos
# themes missing from the list are automatically disallowed
# list is a comma separated list of git repos eg:
# https://github.com/discourse/discourse-custom-header-links.git,https://github.com/discourse/discourse-simple-theme.git
allowed_theme_repos =

# Demon::EmailSync is used in conjunction with the enable_imap site setting
# to sync N IMAP mailboxes with specific groups. It is a process started in
# unicorn.conf, and it spawns N threads (one for each multisite connection) and
# for each database spans another N threads (one for each configured group).
#
# We want this off by default so the process is not started when it does not
# need to be (e.g. development, test, certain hosting tiers)
enable_email_sync_demon = false

# we never want to queue more than 10000 digests per 30 minute block
# this can easily lead to blocking sidekiq
# on multisites we recommend a far lower number
max_digests_enqueued_per_30_mins_per_site = 10000

# This cluster name can be passed to the /srv/status route to verify
# the application cluster is the same one you are expecting
cluster_name =

# The YAML file used to configure multisite clusters
multisite_config_path = config/multisite.yml

# If false, only short (regular) polling will be attempted
enable_long_polling =

# Length of time to hold open a long polling connection in milliseconds
long_polling_interval =