databases.txt

=========
Databases
=========

Django officially supports the following databases:

* :ref:`PostgreSQL <postgresql-notes>`
* :ref:`MariaDB <mariadb-notes>`
* :ref:`MySQL <mysql-notes>`
* :ref:`Oracle <oracle-notes>`
* :ref:`SQLite <sqlite-notes>`

There are also a number of :ref:`database backends provided by third parties
<third-party-notes>`.

Django attempts to support as many features as possible on all database
backends. However, not all database backends are alike, and we've had to make
design decisions on which features to support and which assumptions we can make
safely.

This file describes some of the features that might be relevant to Django
usage. It is not intended as a replacement for server-specific documentation or
reference manuals.

General notes
=============

.. _persistent-database-connections:

Persistent connections
----------------------

Persistent connections avoid the overhead of reestablishing a connection to
the database in each HTTP request. They're controlled by the
:setting:`CONN_MAX_AGE` parameter which defines the maximum lifetime of a
connection. It can be set independently for each database.

The default value is ``0``, preserving the historical behavior of closing the
database connection at the end of each request. To enable persistent
connections, set :setting:`CONN_MAX_AGE` to a positive integer of seconds. For
unlimited persistent connections, set it to ``None``.

Connection management
~~~~~~~~~~~~~~~~~~~~~

Django opens a connection to the database when it first makes a database
query. It keeps this connection open and reuses it in subsequent requests.
Django closes the connection once it exceeds the maximum age defined by
:setting:`CONN_MAX_AGE` or when it isn't usable any longer.

In detail, Django automatically opens a connection to the database whenever it
needs one and doesn't have one already — either because this is the first
connection, or because the previous connection was closed.

At the beginning of each request, Django closes the connection if it has
reached its maximum age. If your database terminates idle connections after
some time, you should set :setting:`CONN_MAX_AGE` to a lower value, so that
Django doesn't attempt to use a connection that has been terminated by the
database server. (This problem may only affect very low traffic sites.)

At the end of each request, Django closes the connection if it has reached its
maximum age or if it is in an unrecoverable error state. If any database
errors have occurred while processing the requests, Django checks whether the
connection still works, and closes it if it doesn't. Thus, database errors
affect at most one request per each application's worker thread; if the
connection becomes unusable, the next request gets a fresh connection.

Setting :setting:`CONN_HEALTH_CHECKS` to ``True`` can be used to improve the
robustness of connection reuse and prevent errors when a connection has been
closed by the database server which is now ready to accept and serve new
connections, e.g. after database server restart. The health check is performed
only once per request and only if the database is being accessed during the
handling of the request.

Caveats
~~~~~~~

Since each thread maintains its own connection, your database must support at
least as many simultaneous connections as you have worker threads.

Sometimes a database won't be accessed by the majority of your views, for
example because it's the database of an external system, or thanks to caching.
In such cases, you should set :setting:`CONN_MAX_AGE` to a low value or even
``0``, because it doesn't make sense to maintain a connection that's unlikely
to be reused. This will help keep the number of simultaneous connections to
this database small.

The development server creates a new thread for each request it handles,
negating the effect of persistent connections. Don't enable them during
development.

When Django establishes a connection to the database, it sets up appropriate
parameters, depending on the backend being used. If you enable persistent
connections, this setup is no longer repeated every request. If you modify
parameters such as the connection's isolation level or time zone, you should
either restore Django's defaults at the end of each request, force an
appropriate value at the beginning of each request, or disable persistent
connections.

If a connection is created in a long-running process, outside of Django’s
request-response cycle, the connection will remain open until explicitly
closed, or timeout occurs. You can use ``django.db.close_old_connections()`` to
close all old or unusable connections.

Encoding
--------

Django assumes that all databases use UTF-8 encoding. Using other encodings may
result in unexpected behavior such as "value too long" errors from your
database for data that is valid in Django. See the database specific notes
below for information on how to set up your database correctly.

.. _postgresql-notes:

PostgreSQL notes
================

Django supports PostgreSQL 14 and higher. `psycopg`_ 3.1.8+ or `psycopg2`_
2.8.4+ is required, though the latest `psycopg`_ 3.1.8+ is recommended.

.. note::

    Support for ``psycopg2`` is likely to be deprecated and removed at some
    point in the future.

.. _postgresql-connection-settings:

PostgreSQL connection settings
-------------------------------

See :setting:`HOST` for details.

To connect using a service name from the `connection service file`_ and a
password from the `password file`_, you must specify them in the
:setting:`OPTIONS` part of your database configuration in :setting:`DATABASES`:

.. code-block:: python
    :caption: ``settings.py``

    DATABASES = {
        "default": {
            "ENGINE": "django.db.backends.postgresql",
            "OPTIONS": {
                "service": "my_service",
                "passfile": ".my_pgpass",
            },
        }
    }

.. code-block:: text
    :caption: ``.pg_service.conf``

    [my_service]
    host=localhost
    user=USER
    dbname=NAME
    port=5432

.. code-block:: text
    :caption: ``.my_pgpass``

    localhost:5432:NAME:USER:PASSWORD

The PostgreSQL backend passes the content of :setting:`OPTIONS` as keyword
arguments to the connection constructor, allowing for more advanced control
of driver behavior. All available `parameters`_ are described in detail in the
PostgreSQL documentation.

.. _connection service file: https://www.postgresql.org/docs/current/libpq-pgservice.html
.. _password file: https://www.postgresql.org/docs/current/libpq-pgpass.html
.. _parameters: https://www.postgresql.org/docs/current/libpq-connect.html#LIBPQ-PARAMKEYWORDS

.. warning::

    Using a service name for testing purposes is not supported. This
    :ticket:`may be implemented later <33685>`.

Optimizing PostgreSQL's configuration
-------------------------------------

Django needs the following parameters for its database connections:

- ``client_encoding``: ``'UTF8'``,
- ``default_transaction_isolation``: ``'read committed'`` by default,
  or the value set in the connection options (see below),
- ``timezone``:
    - when :setting:`USE_TZ` is ``True``, ``'UTC'`` by default, or the
      :setting:`TIME_ZONE <DATABASE-TIME_ZONE>` value set for the connection,
    - when :setting:`USE_TZ` is ``False``, the value of the global
      :setting:`TIME_ZONE` setting.

If these parameters already have the correct values, Django won't set them for
every new connection, which improves performance slightly. You can configure
them directly in :file:`postgresql.conf` or more conveniently per database
user with `ALTER ROLE`_.

Django will work just fine without this optimization, but each new connection
will do some additional queries to set these parameters.

.. _ALTER ROLE: https://www.postgresql.org/docs/current/sql-alterrole.html

.. _database-isolation-level:

Isolation level
---------------

Like PostgreSQL itself, Django defaults to the ``READ COMMITTED`` `isolation
level`_. If you need a higher isolation level such as ``REPEATABLE READ`` or
``SERIALIZABLE``, set it in the :setting:`OPTIONS` part of your database
configuration in :setting:`DATABASES`::

    from django.db.backends.postgresql.psycopg_any import IsolationLevel

    DATABASES = {
        # ...
        "OPTIONS": {
            "isolation_level": IsolationLevel.SERIALIZABLE,
        },
    }

.. note::

    Under higher isolation levels, your application should be prepared to
    handle exceptions raised on serialization failures. This option is
    designed for advanced uses.

.. _isolation level: https://www.postgresql.org/docs/current/transaction-iso.html

.. _database-role:

Role
----

If you need to use a different role for database connections than the role use
to establish the connection, set it in the :setting:`OPTIONS` part of your
database configuration in :setting:`DATABASES`::

    DATABASES = {
        "default": {
            "ENGINE": "django.db.backends.postgresql",
            # ...
            "OPTIONS": {
                "assume_role": "my_application_role",
            },
        },
    }

.. _postgresql-pool:

Connection pool
---------------

.. versionadded:: 5.1

To use a connection pool with `psycopg`_, you can either set ``"pool"`` in the
:setting:`OPTIONS` part of your database configuration in :setting:`DATABASES`
to be a dict to be passed to :class:`~psycopg:psycopg_pool.ConnectionPool`, or
to ``True`` to use the ``ConnectionPool`` defaults::

    DATABASES = {
        "default": {
            "ENGINE": "django.db.backends.postgresql",
            # ...
            "OPTIONS": {
                "pool": True,
            },
        },
    }

This option requires ``psycopg[pool]`` or :pypi:`psycopg-pool` to be installed
and is ignored with ``psycopg2``.

.. _database-server-side-parameters-binding:

Server-side parameters binding
------------------------------

With `psycopg`_ 3.1.8+, Django defaults to the :ref:`client-side binding
cursors <psycopg:client-side-binding-cursors>`. If you want to use the
:ref:`server-side binding <psycopg:server-side-binding>` set it in the
:setting:`OPTIONS` part of your database configuration in
:setting:`DATABASES`::

    DATABASES = {
        "default": {
            "ENGINE": "django.db.backends.postgresql",
            # ...
            "OPTIONS": {
                "server_side_binding": True,
            },
        },
    }

This option is ignored with ``psycopg2``.

Indexes for ``varchar`` and ``text`` columns
--------------------------------------------

When specifying ``db_index=True`` on your model fields, Django typically
outputs a single ``CREATE INDEX`` statement.  However, if the database type
for the field is either ``varchar`` or ``text`` (e.g., used by ``CharField``,
``FileField``, and ``TextField``), then Django will create
an additional index that uses an appropriate `PostgreSQL operator class`_
for the column.  The extra index is necessary to correctly perform
lookups that use the ``LIKE`` operator in their SQL, as is done with the
``contains`` and ``startswith`` lookup types.

.. _PostgreSQL operator class: https://www.postgresql.org/docs/current/indexes-opclass.html

Migration operation for adding extensions
-----------------------------------------

If you need to add a PostgreSQL extension (like ``hstore``, ``postgis``, etc.)
using a migration, use the
:class:`~django.contrib.postgres.operations.CreateExtension` operation.

.. _postgresql-server-side-cursors:

Server-side cursors
-------------------

When using :meth:`QuerySet.iterator()
<django.db.models.query.QuerySet.iterator>`, Django opens a :ref:`server-side
cursor <psycopg:server-side-cursors>`. By default, PostgreSQL assumes that
only the first 10% of the results of cursor queries will be fetched. The query
planner spends less time planning the query and starts returning results
faster, but this could diminish performance if more than 10% of the results are
retrieved. PostgreSQL's assumptions on the number of rows retrieved for a
cursor query is controlled with the `cursor_tuple_fraction`_ option.

.. _cursor_tuple_fraction: https://www.postgresql.org/docs/current/runtime-config-query.html#GUC-CURSOR-TUPLE-FRACTION

.. _transaction-pooling-server-side-cursors:

Transaction pooling and server-side cursors
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Using a connection pooler in transaction pooling mode (e.g. `PgBouncer`_)
requires disabling server-side cursors for that connection.

Server-side cursors are local to a connection and remain open at the end of a
transaction when :setting:`AUTOCOMMIT <DATABASE-AUTOCOMMIT>` is ``True``. A
subsequent transaction may attempt to fetch more results from a server-side
cursor. In transaction pooling mode, there's no guarantee that subsequent
transactions will use the same connection. If a different connection is used,
an error is raised when the transaction references the server-side cursor,
because server-side cursors are only accessible in the connection in which they
were created.

One solution is to disable server-side cursors for a connection in
:setting:`DATABASES` by setting :setting:`DISABLE_SERVER_SIDE_CURSORS
<DATABASE-DISABLE_SERVER_SIDE_CURSORS>` to ``True``.

To benefit from server-side cursors in transaction pooling mode, you could set
up :doc:`another connection to the database </topics/db/multi-db>` in order to
perform queries that use server-side cursors. This connection needs to either
be directly to the database or to a connection pooler in session pooling mode.

Another option is to wrap each ``QuerySet`` using server-side cursors in an
:func:`~django.db.transaction.atomic` block, because it disables ``autocommit``
for the duration of the transaction. This way, the server-side cursor will only
live for the duration of the transaction.

.. _PgBouncer: https://www.pgbouncer.org/

.. _manually-specified-autoincrement-pk:

Manually-specifying values of auto-incrementing primary keys
------------------------------------------------------------

Django uses PostgreSQL's identity columns to store auto-incrementing primary
keys. An identity column is populated with values from a `sequence`_ that keeps
track of the next available value. Manually assigning a value to an
auto-incrementing field doesn't update the field's sequence, which might later
cause a conflict. For example:

.. code-block:: pycon

    >>> from django.contrib.auth.models import User
    >>> User.objects.create(username="alice", pk=1)
    <User: alice>
    >>> # The sequence hasn't been updated; its next value is 1.
    >>> User.objects.create(username="bob")
    IntegrityError: duplicate key value violates unique constraint
    "auth_user_pkey" DETAIL:  Key (id)=(1) already exists.

If you need to specify such values, reset the sequence afterward to avoid
reusing a value that's already in the table. The :djadmin:`sqlsequencereset`
management command generates the SQL statements to do that.

.. _sequence: https://www.postgresql.org/docs/current/sql-createsequence.html

Test database templates
-----------------------

You can use the :setting:`TEST['TEMPLATE'] <TEST_TEMPLATE>` setting to specify
a `template`_ (e.g. ``'template0'``) from which to create a test database.

.. _template: https://www.postgresql.org/docs/current/sql-createdatabase.html

Speeding up test execution with non-durable settings
----------------------------------------------------

You can speed up test execution times by `configuring PostgreSQL to be
non-durable <https://www.postgresql.org/docs/current/non-durability.html>`_.

.. warning::

    This is dangerous: it will make your database more susceptible to data loss
    or corruption in the case of a server crash or power loss. Only use this on
    a development machine where you can easily restore the entire contents of
    all databases in the cluster.

.. _psycopg: https://www.psycopg.org/psycopg3/
.. _psycopg2: https://www.psycopg.org/

.. _mariadb-notes:

MariaDB notes
=============

Django supports MariaDB 10.5 and higher.

To use MariaDB, use the MySQL backend, which is shared between the two. See the
:ref:`MySQL notes <mysql-notes>` for more details.

.. _mysql-notes:

MySQL notes
===========

Version support
---------------

Django supports MySQL 8.0.11 and higher.

Django's ``inspectdb`` feature uses the ``information_schema`` database, which
contains detailed data on all database schemas.

Django expects the database to support Unicode (UTF-8 encoding) and delegates to
it the task of enforcing transactions and referential integrity. It is important
to be aware of the fact that the two latter ones aren't actually enforced by
MySQL when using the MyISAM storage engine, see the next section.

.. _mysql-storage-engines:

Storage engines
---------------

MySQL has several `storage engines`_. You can change the default storage engine
in the server configuration.

MySQL's default storage engine is InnoDB_. This engine is fully transactional
and supports foreign key references. It's the recommended choice. However, the
InnoDB autoincrement counter is lost on a MySQL restart because it does not
remember the ``AUTO_INCREMENT`` value, instead recreating it as "max(id)+1".
This may result in an inadvertent reuse of :class:`~django.db.models.AutoField`
values.

The main drawbacks of MyISAM_ are that it doesn't support transactions or
enforce foreign-key constraints.

.. _storage engines: https://dev.mysql.com/doc/refman/en/storage-engines.html
.. _MyISAM: https://dev.mysql.com/doc/refman/en/myisam-storage-engine.html
.. _InnoDB: https://dev.mysql.com/doc/refman/en/innodb-storage-engine.html

.. _mysql-db-api-drivers:

MySQL DB API Drivers
--------------------

MySQL has a couple drivers that implement the Python Database API described in
:pep:`249`:

- :pypi:`mysqlclient` is a native driver. It's **the recommended choice**.
- `MySQL Connector/Python`_ is a pure Python driver from Oracle that does not
  require the MySQL client library or any Python modules outside the standard
  library.

.. _MySQL Connector/Python: https://dev.mysql.com/downloads/connector/python/

These drivers are thread-safe and provide connection pooling.

In addition to a DB API driver, Django needs an adapter to access the database
drivers from its ORM. Django provides an adapter for mysqlclient while MySQL
Connector/Python includes `its own`_.

.. _its own: https://dev.mysql.com/doc/connector-python/en/connector-python-django-backend.html

mysqlclient
~~~~~~~~~~~

Django requires `mysqlclient`_ 1.4.3 or later.

MySQL Connector/Python
~~~~~~~~~~~~~~~~~~~~~~

MySQL Connector/Python is available from the `download page`_.
The Django adapter is available in versions 1.1.X and later. It may not
support the most recent releases of Django.

.. _download page: https://dev.mysql.com/downloads/connector/python/

.. _mysql-time-zone-definitions:

Time zone definitions
---------------------

If you plan on using Django's :doc:`timezone support </topics/i18n/timezones>`,
use `mysql_tzinfo_to_sql`_ to load time zone tables into the MySQL database.
This needs to be done just once for your MySQL server, not per database.

.. _mysql_tzinfo_to_sql: https://dev.mysql.com/doc/refman/en/mysql-tzinfo-to-sql.html

Creating your database
----------------------

You can `create your database`_ using the command-line tools and this SQL:

.. code-block:: sql

  CREATE DATABASE <dbname> CHARACTER SET utf8;

This ensures all tables and columns will use UTF-8 by default.

.. _create your database: https://dev.mysql.com/doc/refman/en/create-database.html

.. _mysql-collation:

Collation settings
~~~~~~~~~~~~~~~~~~

The collation setting for a column controls the order in which data is sorted
as well as what strings compare as equal. You can specify the ``db_collation``
parameter to set the collation name of the column for
:attr:`CharField <django.db.models.CharField.db_collation>` and
:attr:`TextField <django.db.models.TextField.db_collation>`.

The collation can also be set on a database-wide level and per-table. This is
`documented thoroughly`_ in the MySQL documentation. In such cases, you must
set the collation by directly manipulating the database settings or tables.
Django doesn't provide an API to change them.

.. _documented thoroughly: https://dev.mysql.com/doc/refman/en/charset.html

By default, with a UTF-8 database, MySQL will use the
``utf8_general_ci`` collation. This results in all string equality
comparisons being done in a *case-insensitive* manner. That is, ``"Fred"`` and
``"freD"`` are considered equal at the database level. If you have a unique
constraint on a field, it would be illegal to try to insert both ``"aa"`` and
``"AA"`` into the same column, since they compare as equal (and, hence,
non-unique) with the default collation. If you want case-sensitive comparisons
on a particular column or table, change the column or table to use the
``utf8_bin`` collation.

Please note that according to `MySQL Unicode Character Sets`_, comparisons for
the ``utf8_general_ci`` collation are faster, but slightly less correct, than
comparisons for ``utf8_unicode_ci``. If this is acceptable for your application,
you should use ``utf8_general_ci`` because it is faster. If this is not acceptable
(for example, if you require German dictionary order), use ``utf8_unicode_ci``
because it is more accurate.

.. _MySQL Unicode Character Sets: https://dev.mysql.com/doc/refman/en/charset-unicode-sets.html

.. warning::

    Model formsets validate unique fields in a case-sensitive manner. Thus when
    using a case-insensitive collation, a formset with unique field values that
    differ only by case will pass validation, but upon calling ``save()``, an
    ``IntegrityError`` will be raised.

Connecting to the database
--------------------------

Refer to the :doc:`settings documentation </ref/settings>`.

Connection settings are used in this order:

#. :setting:`OPTIONS`.
#. :setting:`NAME`, :setting:`USER`, :setting:`PASSWORD`, :setting:`HOST`,
   :setting:`PORT`
#. MySQL option files.

In other words, if you set the name of the database in :setting:`OPTIONS`,
this will take precedence over :setting:`NAME`, which would override
anything in a `MySQL option file`_.

Here's a sample configuration which uses a MySQL option file::

    # settings.py
    DATABASES = {
        "default": {
            "ENGINE": "django.db.backends.mysql",
            "OPTIONS": {
                "read_default_file": "/path/to/my.cnf",
            },
        }
    }

.. code-block:: ini

    # my.cnf
    [client]
    database = NAME
    user = USER
    password = PASSWORD
    default-character-set = utf8

Several other `MySQLdb connection options`_ may be useful, such as ``ssl``,
``init_command``, and ``sql_mode``.

.. _MySQL option file: https://dev.mysql.com/doc/refman/en/option-files.html
.. _MySQLdb connection options: https://mysqlclient.readthedocs.io/user_guide.html#functions-and-attributes

.. _mysql-sql-mode:

Setting ``sql_mode``
~~~~~~~~~~~~~~~~~~~~

The default value of the ``sql_mode`` option contains ``STRICT_TRANS_TABLES``.
That option escalates warnings into errors when data are truncated upon
insertion, so Django highly recommends activating a `strict mode`_ for MySQL to
prevent data loss (either ``STRICT_TRANS_TABLES`` or ``STRICT_ALL_TABLES``).

.. _strict mode: https://dev.mysql.com/doc/refman/en/sql-mode.html#sql-mode-strict

If you need to customize the SQL mode, you can set the ``sql_mode`` variable
like other MySQL options: either in a config file or with the entry
``'init_command': "SET sql_mode='STRICT_TRANS_TABLES'"`` in the
:setting:`OPTIONS` part of your database configuration in :setting:`DATABASES`.

.. _mysql-isolation-level:

Isolation level
~~~~~~~~~~~~~~~

When running concurrent loads, database transactions from different sessions
(say, separate threads handling different requests) may interact with each
other. These interactions are affected by each session's `transaction isolation
level`_. You can set a connection's isolation level with an
``'isolation_level'`` entry in the :setting:`OPTIONS` part of your database
configuration in :setting:`DATABASES`. Valid values for
this entry are the four standard isolation levels:

* ``'read uncommitted'``
* ``'read committed'``
* ``'repeatable read'``
* ``'serializable'``

or ``None`` to use the server's configured isolation level. However, Django
works best with and defaults to read committed rather than MySQL's default,
repeatable read. Data loss is possible with repeatable read. In particular,
you may see cases where :meth:`~django.db.models.query.QuerySet.get_or_create`
will raise an :exc:`~django.db.IntegrityError` but the object won't appear in
a subsequent :meth:`~django.db.models.query.QuerySet.get` call.

.. _transaction isolation level: https://dev.mysql.com/doc/refman/en/innodb-transaction-isolation-levels.html

Creating your tables
--------------------

When Django generates the schema, it doesn't specify a storage engine, so
tables will be created with whatever default storage engine your database
server is configured for. The easiest solution is to set your database server's
default storage engine to the desired engine.

If you're using a hosting service and can't change your server's default
storage engine, you have a couple of options.

* After the tables are created, execute an ``ALTER TABLE`` statement to
  convert a table to a new storage engine (such as InnoDB):

  .. code-block:: sql

      ALTER TABLE <tablename> ENGINE=INNODB;

  This can be tedious if you have a lot of tables.

* Another option is to use the ``init_command`` option for MySQLdb prior to
  creating your tables::

      "OPTIONS": {
          "init_command": "SET default_storage_engine=INNODB",
      }

  This sets the default storage engine upon connecting to the database.
  After your tables have been created, you should remove this option as it
  adds a query that is only needed during table creation to each database
  connection.

Table names
-----------

There are `known issues`_ in even the latest versions of MySQL that can cause the
case of a table name to be altered when certain SQL statements are executed
under certain conditions. It is recommended that you use lowercase table
names, if possible, to avoid any problems that might arise from this behavior.
Django uses lowercase table names when it auto-generates table names from
models, so this is mainly a consideration if you are overriding the table name
via the :class:`~django.db.models.Options.db_table` parameter.

.. _known issues: https://bugs.mysql.com/bug.php?id=48875

Savepoints
----------

Both the Django ORM and MySQL (when using the InnoDB :ref:`storage engine
<mysql-storage-engines>`) support database :ref:`savepoints
<topics-db-transactions-savepoints>`.

If you use the MyISAM storage engine please be aware of the fact that you will
receive database-generated errors if you try to use the :ref:`savepoint-related
methods of the transactions API <topics-db-transactions-savepoints>`. The reason
for this is that detecting the storage engine of a MySQL database/table is an
expensive operation so it was decided it isn't worth to dynamically convert
these methods in no-op's based in the results of such detection.

Notes on specific fields
------------------------

.. _mysql-character-fields:

Character fields
~~~~~~~~~~~~~~~~

Any fields that are stored with ``VARCHAR`` column types may have their
``max_length`` restricted to 255 characters if you are using ``unique=True``
for the field. This affects :class:`~django.db.models.CharField`,
:class:`~django.db.models.SlugField`. See `the MySQL documentation`_ for more
details.

.. _the MySQL documentation: https://dev.mysql.com/doc/refman/en/create-index.html#create-index-column-prefixes

``TextField`` limitations
~~~~~~~~~~~~~~~~~~~~~~~~~

MySQL can index only the first N chars of a ``BLOB`` or ``TEXT`` column. Since
``TextField`` doesn't have a defined length, you can't mark it as
``unique=True``. MySQL will report: "BLOB/TEXT column '<db_column>' used in key
specification without a key length".

.. _mysql-fractional-seconds:

Fractional seconds support for Time and DateTime fields
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

MySQL can store fractional seconds, provided that the column definition
includes a fractional indication (e.g. ``DATETIME(6)``).

Django will not upgrade existing columns to include fractional seconds if the
database server supports it. If you want to enable them on an existing database,
it's up to you to either manually update the column on the target database, by
executing a command like:

.. code-block:: sql

    ALTER TABLE `your_table` MODIFY `your_datetime_column` DATETIME(6)

or using a :class:`~django.db.migrations.operations.RunSQL` operation in a
:ref:`data migration <data-migrations>`.

``TIMESTAMP`` columns
~~~~~~~~~~~~~~~~~~~~~

If you are using a legacy database that contains ``TIMESTAMP`` columns, you must
set :setting:`USE_TZ = False <USE_TZ>` to avoid data corruption.
:djadmin:`inspectdb` maps these columns to
:class:`~django.db.models.DateTimeField` and if you enable timezone support,
both MySQL and Django will attempt to convert the values from UTC to local time.

Row locking with ``QuerySet.select_for_update()``
-------------------------------------------------

MySQL and MariaDB do not support some options to the ``SELECT ... FOR UPDATE``
statement. If ``select_for_update()`` is used with an unsupported option, then
a :exc:`~django.db.NotSupportedError` is raised.

=============== ========= =====
Option          MariaDB   MySQL
=============== ========= =====
``SKIP LOCKED`` X (≥10.6) X
``NOWAIT``      X         X
``OF``                    X
``NO KEY``
=============== ========= =====

When using ``select_for_update()`` on MySQL, make sure you filter a queryset
against at least a set of fields contained in unique constraints or only
against fields covered by indexes. Otherwise, an exclusive write lock will be
acquired over the full table for the duration of the transaction.

Automatic typecasting can cause unexpected results
--------------------------------------------------

When performing a query on a string type, but with an integer value, MySQL will
coerce the types of all values in the table to an integer before performing the
comparison. If your table contains the values ``'abc'``, ``'def'`` and you
query for ``WHERE mycolumn=0``, both rows will match. Similarly, ``WHERE mycolumn=1``
will match the value ``'abc1'``. Therefore, string type fields included in Django
will always cast the value to a string before using it in a query.

If you implement custom model fields that inherit from
:class:`~django.db.models.Field` directly, are overriding
:meth:`~django.db.models.Field.get_prep_value`, or use
:class:`~django.db.models.expressions.RawSQL`,
:meth:`~django.db.models.query.QuerySet.extra`, or
:meth:`~django.db.models.Manager.raw`, you should ensure that you perform
appropriate typecasting.

.. _sqlite-notes:

SQLite notes
============

Django supports SQLite 3.31.0 and later.

SQLite_ provides an excellent development alternative for applications that
are predominantly read-only or require a smaller installation footprint. As
with all database servers, though, there are some differences that are
specific to SQLite that you should be aware of.

.. _SQLite: https://www.sqlite.org/

.. _sqlite-string-matching:

Substring matching and case sensitivity
---------------------------------------

For all SQLite versions, there is some slightly counter-intuitive behavior when
attempting to match some types of strings.  These are triggered when using the
:lookup:`iexact` or :lookup:`contains` filters in Querysets. The behavior
splits into two cases:

1. For substring matching, all matches are done case-insensitively. That is a
filter such as ``filter(name__contains="aa")`` will match a name of ``"Aabb"``.

2. For strings containing characters outside the ASCII range, all exact string
matches are performed case-sensitively, even when the case-insensitive options
are passed into the query. So the :lookup:`iexact` filter will behave exactly
the same as the :lookup:`exact` filter in these cases.

Some possible workarounds for this are `documented at sqlite.org`_, but they
aren't utilized by the default SQLite backend in Django, as incorporating them
would be fairly difficult to do robustly. Thus, Django exposes the default
SQLite behavior and you should be aware of this when doing case-insensitive or
substring filtering.

.. _documented at sqlite.org: https://www.sqlite.org/faq.html#q18

.. _sqlite-decimal-handling:

Decimal handling
----------------

SQLite has no real decimal internal type. Decimal values are internally
converted to the ``REAL`` data type (8-byte IEEE floating point number), as
explained in the `SQLite datatypes documentation`__, so they don't support
correctly-rounded decimal floating point arithmetic.

__ https://www.sqlite.org/datatype3.html#storage_classes_and_datatypes

"Database is locked" errors
---------------------------

SQLite is meant to be a lightweight database, and thus can't support a high
level of concurrency. ``OperationalError: database is locked`` errors indicate
that your application is experiencing more concurrency than ``sqlite`` can
handle in default configuration. This error means that one thread or process has
an exclusive lock on the database connection and another thread timed out
waiting for the lock the be released.

Python's SQLite wrapper has
a default timeout value that determines how long the second thread is allowed to
wait on the lock before it times out and raises the ``OperationalError: database
is locked`` error.

If you're getting this error, you can solve it by:

* Switching to another database backend. At a certain point SQLite becomes
  too "lite" for real-world applications, and these sorts of concurrency
  errors indicate you've reached that point.

* Rewriting your code to reduce concurrency and ensure that database
  transactions are short-lived.

* Increase the default timeout value by setting the ``timeout`` database
  option::

      "OPTIONS": {
          # ...
          "timeout": 20,
          # ...
      }

  This will make SQLite wait a bit longer before throwing "database is locked"
  errors; it won't really do anything to solve them.

.. _sqlite-transaction-behavior:

Transactions behavior
~~~~~~~~~~~~~~~~~~~~~

.. versionadded:: 5.1

SQLite supports three transaction modes: ``DEFERRED``, ``IMMEDIATE``, and
``EXCLUSIVE``.

The default is ``DEFERRED``. If you need to use a different mode, set it in the
:setting:`OPTIONS` part of your database configuration in
:setting:`DATABASES`, for example::

    "OPTIONS": {
        # ...
        "transaction_mode": "IMMEDIATE",
        # ...
    }

To make sure your transactions wait until ``timeout`` before raising "Database
is Locked", change the transaction mode to ``IMMEDIATE``.

For the best performance with ``IMMEDIATE`` and ``EXCLUSIVE``, transactions
should be as short as possible. This might be hard to guarantee for all of your
views so the usage of :setting:`ATOMIC_REQUESTS <DATABASE-ATOMIC_REQUESTS>` is
discouraged  in this case.

For more information see `Transactions in SQLite`_.

.. _`Transactions in SQLite`:  https://www.sqlite.org/lang_transaction.html#deferred_immediate_and_exclusive_transactions

``QuerySet.select_for_update()`` not supported
----------------------------------------------

SQLite does not support the ``SELECT ... FOR UPDATE`` syntax. Calling it will
have no effect.

.. _sqlite-isolation:

Isolation when using ``QuerySet.iterator()``
--------------------------------------------

There are special considerations described in `Isolation In SQLite`_ when
modifying a table while iterating over it using :meth:`.QuerySet.iterator`. If
a row is added, changed, or deleted within the loop, then that row may or may
not appear, or may appear twice, in subsequent results fetched from the
iterator. Your code must handle this.

.. _`Isolation in SQLite`: https://www.sqlite.org/isolation.html

.. _sqlite-json1:

Enabling JSON1 extension on SQLite
----------------------------------

To use :class:`~django.db.models.JSONField` on SQLite, you need to enable the
`JSON1 extension`_ on Python's :py:mod:`sqlite3` library. If the extension is
not enabled on your installation, a system error (``fields.E180``) will be
raised.

To enable the JSON1 extension you can follow the instruction on
`the wiki page`_.

.. note::

    The JSON1 extension is enabled by default on SQLite 3.38+.

.. _JSON1 extension: https://www.sqlite.org/json1.html
.. _the wiki page: https://code.djangoproject.com/wiki/JSON1Extension

.. _sqlite-init-command:

Setting pragma options
----------------------

.. versionadded:: 5.1

`Pragma options`_ can be set upon connection by using the ``init_command`` in
the :setting:`OPTIONS` part of your database configuration in
:setting:`DATABASES`. The example below shows how to enable extra durability of
synchronous writes and change the ``cache_size``::

    DATABASES = {
        "default": {
            "ENGINE": "django.db.backends.sqlite3",
            # ...
            "OPTIONS": {
                "init_command": "PRAGMA synchronous=3; PRAGMA cache_size=2000;",
            },
        }
    }

.. _Pragma options: https://www.sqlite.org/pragma.html

.. _oracle-notes:

Oracle notes
============

Django supports `Oracle Database Server`_ versions 19c and higher. Version
1.3.2 or higher of the `oracledb`_ Python driver is required.

.. deprecated:: 5.0

    Support for ``cx_Oracle`` is deprecated.

.. _`Oracle Database Server`: https://www.oracle.com/
.. _`oracledb`: https://oracle.github.io/python-oracledb/

In order for the ``python manage.py migrate`` command to work, your Oracle
database user must have privileges to run the following commands:

* CREATE TABLE
* CREATE SEQUENCE
* CREATE PROCEDURE
* CREATE TRIGGER

To run a project's test suite, the user usually needs these *additional*
privileges:

* CREATE USER
* ALTER USER
* DROP USER
* CREATE TABLESPACE
* DROP TABLESPACE
* CREATE SESSION WITH ADMIN OPTION
* CREATE TABLE WITH ADMIN OPTION
* CREATE SEQUENCE WITH ADMIN OPTION
* CREATE PROCEDURE WITH ADMIN OPTION
* CREATE TRIGGER WITH ADMIN OPTION

While the ``RESOURCE`` role has the required ``CREATE TABLE``,
``CREATE SEQUENCE``, ``CREATE PROCEDURE``, and ``CREATE TRIGGER`` privileges,
and a user granted ``RESOURCE WITH ADMIN OPTION`` can grant ``RESOURCE``, such
a user cannot grant the individual privileges (e.g. ``CREATE TABLE``), and thus
``RESOURCE WITH ADMIN OPTION`` is not usually sufficient for running tests.

Some test suites also create views or materialized views; to run these, the
user also needs ``CREATE VIEW WITH ADMIN OPTION`` and
``CREATE MATERIALIZED VIEW WITH ADMIN OPTION`` privileges. In particular, this
is needed for Django's own test suite.

All of these privileges are included in the DBA role, which is appropriate
for use on a private developer's database.

The Oracle database backend uses the ``SYS.DBMS_LOB`` and ``SYS.DBMS_RANDOM``
packages, so your user will require execute permissions on it. It's normally
accessible to all users by default, but in case it is not, you'll need to grant
permissions like so:

.. code-block:: sql

    GRANT EXECUTE ON SYS.DBMS_LOB TO user;
    GRANT EXECUTE ON SYS.DBMS_RANDOM TO user;

Connecting to the database
--------------------------

To connect using the service name of your Oracle database, your ``settings.py``
file should look something like this::

    DATABASES = {
        "default": {
            "ENGINE": "django.db.backends.oracle",
            "NAME": "xe",
            "USER": "a_user",
            "PASSWORD": "a_password",
            "HOST": "",
            "PORT": "",
        }
    }


In this case, you should leave both :setting:`HOST` and :setting:`PORT` empty.
However, if you don't use a ``tnsnames.ora`` file or a similar naming method
and want to connect using the SID ("xe" in this example), then fill in both
:setting:`HOST` and :setting:`PORT` like so::

    DATABASES = {
        "default": {
            "ENGINE": "django.db.backends.oracle",
            "NAME": "xe",
            "USER": "a_user",
            "PASSWORD": "a_password",
            "HOST": "dbprod01ned.mycompany.com",
            "PORT": "1540",
        }
    }

You should either supply both :setting:`HOST` and :setting:`PORT`, or leave
both as empty strings. Django will use a different connect descriptor depending
on that choice.

Full DSN and Easy Connect
~~~~~~~~~~~~~~~~~~~~~~~~~

A Full DSN or Easy Connect string can be used in :setting:`NAME` if both
:setting:`HOST` and :setting:`PORT` are empty. This format is required when
using RAC or pluggable databases without ``tnsnames.ora``, for example.

Example of an Easy Connect string::

    "NAME": "localhost:1521/orclpdb1"

Example of a full DSN string::

    "NAME": (
        "(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521))"
        "(CONNECT_DATA=(SERVICE_NAME=orclpdb1)))"
    )

Threaded option
---------------

If you plan to run Django in a multithreaded environment (e.g. Apache using the
default MPM module on any modern operating system), then you **must** set
the ``threaded`` option of your Oracle database configuration to ``True``::

    "OPTIONS": {
        "threaded": True,
    }

Failure to do this may result in crashes and other odd behavior.

INSERT ... RETURNING INTO
-------------------------

By default, the Oracle backend uses a ``RETURNING INTO`` clause to efficiently
retrieve the value of an ``AutoField`` when inserting new rows.  This behavior
may result in a ``DatabaseError`` in certain unusual setups, such as when
inserting into a remote table, or into a view with an ``INSTEAD OF`` trigger.
The ``RETURNING INTO`` clause can be disabled by setting the
``use_returning_into`` option of the database configuration to ``False``::

    "OPTIONS": {
        "use_returning_into": False,
    }

In this case, the Oracle backend will use a separate ``SELECT`` query to
retrieve ``AutoField`` values.

Naming issues
-------------

Oracle imposes a name length limit of 30 characters. To accommodate this, the
backend truncates database identifiers to fit, replacing the final four
characters of the truncated name with a repeatable MD5 hash value.
Additionally, the backend turns database identifiers to all-uppercase.

To prevent these transformations (this is usually required only when dealing
with legacy databases or accessing tables which belong to other users), use
a quoted name as the value for ``db_table``::

    class LegacyModel(models.Model):
        class Meta:
            db_table = '"name_left_in_lowercase"'


    class ForeignModel(models.Model):
        class Meta:
            db_table = '"OTHER_USER"."NAME_ONLY_SEEMS_OVER_30"'

Quoted names can also be used with Django's other supported database
backends; except for Oracle, however, the quotes have no effect.

When running ``migrate``, an ``ORA-06552`` error may be encountered if
certain Oracle keywords are used as the name of a model field or the
value of a ``db_column`` option.  Django quotes all identifiers used
in queries to prevent most such problems, but this error can still
occur when an Oracle datatype is used as a column name.  In
particular, take care to avoid using the names ``date``,
``timestamp``, ``number`` or ``float`` as a field name.

.. _oracle-null-empty-strings:

NULL and empty strings
----------------------

Django generally prefers to use the empty string (``''``) rather than
``NULL``, but Oracle treats both identically. To get around this, the
Oracle backend ignores an explicit ``null`` option on fields that
have the empty string as a possible value and generates DDL as if
``null=True``. When fetching from the database, it is assumed that
a ``NULL`` value in one of these fields really means the empty
string, and the data is silently converted to reflect this assumption.

``TextField`` limitations
-------------------------

The Oracle backend stores ``TextFields`` as ``NCLOB`` columns. Oracle imposes
some limitations on the usage of such LOB columns in general:

* LOB columns may not be used as primary keys.

* LOB columns may not be used in indexes.

* LOB columns may not be used in a ``SELECT DISTINCT`` list. This means that
  attempting to use the ``QuerySet.distinct`` method on a model that
  includes ``TextField`` columns will result in an ``ORA-00932`` error when
  run against Oracle. As a workaround, use the ``QuerySet.defer`` method in
  conjunction with ``distinct()`` to prevent ``TextField`` columns from being
  included in the ``SELECT DISTINCT`` list.

.. _subclassing-database-backends:

Subclassing the built-in database backends
==========================================

Django comes with built-in database backends. You may subclass an existing
database backends to modify its behavior, features, or configuration.

Consider, for example, that you need to change a single database feature.
First, you have to create a new directory with a ``base`` module in it. For
example:

.. code-block:: text

    mysite/
        ...
        mydbengine/
            __init__.py
            base.py

The ``base.py`` module must contain a class named ``DatabaseWrapper`` that
subclasses an existing engine from the ``django.db.backends`` module. Here's an
example of subclassing the PostgreSQL engine to change a feature class
``allows_group_by_selected_pks_on_model``:

.. code-block:: python
    :caption: ``mysite/mydbengine/base.py``

    from django.db.backends.postgresql import base, features


    class DatabaseFeatures(features.DatabaseFeatures):
        def allows_group_by_selected_pks_on_model(self, model):
            return True


    class DatabaseWrapper(base.DatabaseWrapper):
        features_class = DatabaseFeatures

Finally, you must specify a :setting:`DATABASE-ENGINE` in your ``settings.py``
file::

    DATABASES = {
        "default": {
            "ENGINE": "mydbengine",
            # ...
        },
    }

You can see the current list of database engines by looking in
:source:`django/db/backends`.

.. _third-party-notes:

Using a 3rd-party database backend
==================================

In addition to the officially supported databases, there are backends provided
by 3rd parties that allow you to use other databases with Django:

* :pypi:`CockroachDB <django-cockroachdb>`
* :pypi:`Firebird <django-firebird>`
* :pypi:`Google Cloud Spanner <django-google-spanner>`
* :pypi:`Microsoft SQL Server <mssql-django>`
* :pypi:`Snowflake <django-snowflake>`
* :pypi:`TiDB <django-tidb>`
* :pypi:`YugabyteDB <django-yugabytedb>`

The Django versions and ORM features supported by these unofficial backends
vary considerably. Queries regarding the specific capabilities of these
unofficial backends, along with any support queries, should be directed to
the support channels provided by each 3rd party project.