jbig.c

/*
 *  Portable JBIG image compression library
 *
 *  Copyright 1995-2014 -- Markus Kuhn -- http://www.cl.cam.ac.uk/~mgk25/
 *
 *  $Id: jbig.c,v 1.7 2014/04/08 14:22:54 rick Exp $
 *
 *  This module implements a portable standard C encoder and decoder
 *  using the JBIG1 lossless bi-level image compression algorithm
 *  specified in International Standard ISO 11544:1993 and
 *  ITU-T Recommendation T.82. See the file jbig.txt for usage
 *  instructions and application examples.
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 * 
 *  If you want to use this program under different license conditions,
 *  then contact the author for an arrangement.
 */

#ifdef DEBUG
#include <stdio.h>
#else
#define NDEBUG
#endif

#include <stdlib.h>
#include <string.h>
#include <assert.h>

#include "jbig.h"

#define MX_MAX  127    /* maximal supported mx offset for
			* adaptive template in the encoder */

#define TPB2CX  0x195  /* contexts for TP special pixels */
#define TPB3CX  0x0e5
#define TPDCX   0xc3f

/* marker codes */
#define MARKER_STUFF    0x00
#define MARKER_RESERVE  0x01
#define MARKER_SDNORM   0x02
#define MARKER_SDRST    0x03
#define MARKER_ABORT    0x04
#define MARKER_NEWLEN   0x05
#define MARKER_ATMOVE   0x06
#define MARKER_COMMENT  0x07
#define MARKER_ESC      0xff

/* loop array indices */
#define STRIPE  0
#define LAYER   1
#define PLANE   2

/* special jbg_buf pointers (instead of NULL) */
#define SDE_DONE ((struct jbg_buf *) -1)
#define SDE_TODO ((struct jbg_buf *) 0)

/* object code version id */

const char jbg_version[] = 
  "JBIG-KIT " JBG_VERSION " -- (c) 1995-2014 Markus Kuhn -- "
  "Licence: " JBG_LICENCE "\n"
  "$Id: jbig.c,v 1.7 2014/04/08 14:22:54 rick Exp $ ";

/*
 * The following array specifies for each combination of the 3
 * ordering bits, which ii[] variable represents which dimension
 * of s->sde.
 */
static const int iindex[8][3] = {
  { 2, 1, 0 },    /* no ordering bit set */
  { -1, -1, -1},  /* SMID -> illegal combination */
  { 2, 0, 1 },    /* ILEAVE */
  { 1, 0, 2 },    /* SMID + ILEAVE */
  { 0, 2, 1 },    /* SEQ */
  { 1, 2, 0 },    /* SEQ + SMID */
  { 0, 1, 2 },    /* SEQ + ILEAVE */
  { -1, -1, -1 }  /* SEQ + SMID + ILEAVE -> illegal combination */
};

#define _(String) String  /* to mark translatable string for GNU gettext */

/*
 * Array with English ASCII error messages that correspond
 * to return values from public functions in this library.
 */
static const char *errmsg[] = {
  _("All OK"),                                               /* JBG_EOK */
  _("Reached specified image size"),                         /* JBG_EOK_INTR */
  _("Unexpected end of input data stream"),                  /* JBG_EAGAIN */
  _("Not enough memory available"),                          /* JBG_ENOMEM */
  _("ABORT marker segment encountered"),                     /* JBG_EABORT */
  _("Unknown marker segment encountered"),                   /* JBG_EMARKER */
  _("Input data stream contains invalid data"),              /* JBG_EINVAL */
  _("Input data stream uses unimplemented JBIG features"),   /* JBG_EIMPL */
  _("Incremental BIE does not continue previous one")        /* JBG_ENOCONT */
};


/*
 * The following three functions are the only places in this code, were
 * C library memory management functions are called. The whole JBIG
 * library has been designed in order to allow multi-threaded
 * execution. No static or global variables are used, so all fuctions
 * are fully reentrant. However if you want to use this multi-thread
 * capability and your malloc, realloc and free are not reentrant,
 * then simply add the necessary semaphores or mutex primitives below.
 * In contrast to C's malloc() and realloc(), but like C's calloc(),
 * these functions take two parameters nmemb and size that are multiplied
 * before being passed on to the corresponding C function. 
 * This we can catch all overflows during a size_t multiplication a
 * a single place.
 */

#ifndef SIZE_MAX
#define SIZE_MAX ((size_t) -1)     /* largest value of size_t */
#endif

static void *checked_malloc(size_t nmemb, size_t size)
{
  void *p;

  /* Full manual exception handling is ugly here for performance
   * reasons. If an adequate handling of lack of memory is required,
   * then use C++ and throw a C++ exception instead of abort(). */

  /* assert that nmemb * size <= SIZE_MAX */
  if (size > SIZE_MAX / nmemb)
    abort();
  
  p = malloc(nmemb * size);

  if (!p)
    abort();

#if 0
  fprintf(stderr, "%p = malloc(%lu * %lu)\n", p,
	  (unsigned long) nmemb, (unsigned long) size);
#endif

  return p;
}


static void *checked_realloc(void *ptr, size_t nmemb, size_t size)
{
  void *p;

  /* Full manual exception handling is ugly here for performance
   * reasons. If an adequate handling of lack of memory is required,
   * then use C++ and throw a C++ exception here instead of abort(). */

  /* assert that nmemb * size <= SIZE_MAX */
  if (size > SIZE_MAX / nmemb)
    abort();
  
  p = realloc(ptr, nmemb * size);

  if (!p)
    abort();

#if 0
  fprintf(stderr, "%p = realloc(%p, %lu * %lu)\n", p, ptr,
	  (unsigned long) nmemb, (unsigned long) size);
#endif

  return p;
}


static void checked_free(void *ptr)
{
  free(ptr);

#if 0
  fprintf(stderr, "free(%p)\n", ptr);
#endif

}




/*
 * Memory management for buffers which are used for temporarily
 * storing SDEs by the encoder.
 *
 * The following functions manage a set of struct jbg_buf storage
 * containers were each can keep JBG_BUFSIZE bytes. The jbg_buf
 * containers can be linked to form linear double-chained lists for
 * which a number of operations are provided. Blocks which are
 * tempoarily not used any more are returned to a freelist which each
 * encoder keeps. Only the destructor of the encoder actually returns
 * the block via checked_free() to the stdlib memory management.
 */


/*
 * Allocate a new buffer block and initialize it. Try to get it from
 * the free_list, and if it is empty, call checked_malloc().
 */
static struct jbg_buf *jbg_buf_init(struct jbg_buf **free_list)
{
  struct jbg_buf *new_block;
  
  /* Test whether a block from the free list is available */
  if (*free_list) {
    new_block = *free_list;
    *free_list = new_block->next;
  } else {
    /* request a new memory block */
    new_block = (struct jbg_buf *) checked_malloc(1, sizeof(struct jbg_buf));
  }
  new_block->len = 0;
  new_block->next = NULL;
  new_block->previous = NULL;
  new_block->last = new_block;
  new_block->free_list = free_list;

  return new_block;
}


/*
 * Return an entire free_list to the memory management of stdlib.
 * This is only done by jbg_enc_free().
 */
static void jbg_buf_free(struct jbg_buf **free_list)
{
  struct jbg_buf *tmp;
  
  while (*free_list) {
    tmp = (*free_list)->next;
    checked_free(*free_list);
    *free_list = tmp;
  }
  
  return;
}


/*
 * Append a single byte to a single list that starts with the block
 * *(struct jbg_buf *) head. The type of *head is void here in order to
 * keep the interface of the arithmetic encoder gereric, which uses this
 * function as a call-back function in order to deliver single bytes
 * for a PSCD.
 */
static void jbg_buf_write(int b, void *head)
{
  struct jbg_buf *now;

  now = ((struct jbg_buf *) head)->last;
  if (now->len < JBG_BUFSIZE - 1) {
    now->d[now->len++] = b;
    return;
  }
  now->next = jbg_buf_init(((struct jbg_buf *) head)->free_list);
  now->next->previous = now;
  now->next->d[now->next->len++] = b;
  ((struct jbg_buf *) head)->last = now->next;

  return;
}


/*
 * Remove any trailing zero bytes from the end of a linked jbg_buf list,
 * however make sure that no zero byte is removed which directly
 * follows a 0xff byte (i.e., keep MARKER_ESC MARKER_STUFF sequences
 * intact). This function is used to remove any redundant final zero
 * bytes from a PSCD.
 */
static void jbg_buf_remove_zeros(struct jbg_buf *head)
{
  struct jbg_buf *last;

  while (1) {
    /* remove trailing 0x00 in last block of list until this block is empty */
    last = head->last;
    while (last->len && last->d[last->len - 1] == 0)
      last->len--;
    /* if block became really empty, remove it in case it is not the
     * only remaining block and then loop to next block */
    if (last->previous && !last->len) {
      head->last->next = *head->free_list;
      *head->free_list = head->last;
      head->last = last->previous;
      head->last->next = NULL;
    } else
      break;
  }

  /*
   * If the final non-zero byte is 0xff (MARKER_ESC), then we just have
   * removed a MARKER_STUFF and we will append it again now in order
   * to preserve PSCD status of byte stream.
   */
  if (head->last->len && head->last->d[head->last->len - 1] == MARKER_ESC)
    jbg_buf_write(MARKER_STUFF, head);
 
  return;
}


/*
 * The jbg_buf list which starts with block *new_prefix is concatenated
 * with the list which starts with block **start and *start will then point
 * to the first block of the new list.
 */
static void jbg_buf_prefix(struct jbg_buf *new_prefix, struct jbg_buf **start)
{
  new_prefix->last->next = *start;
  new_prefix->last->next->previous = new_prefix->last;
  new_prefix->last = new_prefix->last->next->last;
  *start = new_prefix;
  
  return;
}


/*
 * Send the contents of a jbg_buf list that starts with block **head to
 * the call back function data_out and return the blocks of the jbg_buf
 * list to the freelist from which these jbg_buf blocks have been taken.
 * After the call, *head == NULL.
 */
static void jbg_buf_output(struct jbg_buf **head,
			void (*data_out)(unsigned char *start,
					 size_t len, void *file),
			void *file)
{
  struct jbg_buf *tmp;
  
  while (*head) {
    data_out((*head)->d, (*head)->len, file);
    tmp = (*head)->next;
    (*head)->next = *(*head)->free_list;
    *(*head)->free_list = *head;
    *head = tmp;
  }
  
  return;
}


/*
 * Calculate y = ceil(x/2) applied n times, which is equivalent to
 * y = ceil(x/(2^n)). This function is used to
 * determine the number of pixels per row or column after n resolution
 * reductions. E.g. X[d-1] = jbg_ceil_half(X[d], 1) and X[0] =
 * jbg_ceil_half(X[d], d) as defined in clause 6.2.3 of T.82.
 */
unsigned long jbg_ceil_half(unsigned long x, int n)
{
  unsigned long mask;
  
  assert(n >= 0 && n < 32);
  mask = (1UL << n) - 1;     /* the lowest n bits are 1 here */
  return (x >> n) + ((mask & x) != 0);
}


/*
 * Set L0 (the number of lines in a stripe at lowest resolution)
 * to a default value, such that there are about 35 stripes, as
 * suggested in Annex C of ITU-T T.82, without exceeding the
 * limit 128/2^D suggested in Annex A.
 */
static void jbg_set_default_l0(struct jbg_enc_state *s)
{
  s->l0 = jbg_ceil_half(s->yd, s->d) / 35;   /* 35 stripes/image */
  while ((s->l0 << s->d) > 128)              /* but <= 128 lines/stripe */
    --s->l0;
  if (s->l0 < 2) s->l0 = 2;
}


/*
 * Calculate the number of stripes, as defined in clause 6.2.3 of T.82.
 */
unsigned long jbg_stripes(unsigned long l0, unsigned long yd,
			  unsigned long d)
{
  unsigned long y0 = jbg_ceil_half(yd, d);

  return y0 / l0 + (y0 % l0 != 0);
}


/*
 * Resolution reduction table given by ITU-T T.82 Table 17
 */

static char jbg_resred[4096] = {
  0,0,0,1,0,0,0,1,0,1,1,1,0,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  0,0,1,1,0,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,1,0,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  0,0,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  0,0,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  0,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  0,0,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  1,1,1,1,1,1,1,1,0,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,1,0,0,1,1,0,1,1,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,
  0,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  0,0,1,1,0,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1,
  0,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  0,0,1,1,0,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,
  1,1,0,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,1,0,0,1,0,0,0,1,1,0,0,0,0,0,1,0,1,0,0,1,1,1,0,1,1,
  0,0,0,1,0,0,0,1,0,0,1,0,0,0,1,1,0,1,1,1,0,0,0,1,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,1,0,1,1,1,0,1,0,1,0,0,1,1,1,0,1,1,0,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,0,0,1,0,1,0,0,1,1,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,1,0,1,0,0,0,0,0,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  0,0,0,0,1,0,0,1,1,0,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,0,0,1,0,1,0,0,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,0,1,1,
  1,0,0,1,0,0,1,1,0,1,1,1,1,0,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,1,1,1,0,0,1,1,1,1,1,1,1,1,1,1,
  0,0,1,1,0,0,0,1,0,0,0,1,0,0,1,1,0,1,1,1,0,1,0,1,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,1,1,0,1,1,0,1,1,1,1,1,1,0,1,1,1,0,
  0,0,0,0,0,0,0,1,0,0,1,0,0,0,0,1,1,1,1,1,1,1,0,0,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,0,1,0,0,1,0,0,1,1,0,1,1,1,0,1,0,1,1,1,1,1,1,1,1,1,
  0,0,0,1,0,0,0,1,0,1,1,0,1,0,1,1,1,1,1,1,0,1,0,1,1,1,1,1,1,1,1,1,
  1,1,1,0,1,0,0,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,1,1,
  1,0,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,1,0,0,1,0,0,0,1,1,0,0,0,0,0,0,0,1,0,0,1,1,1,1,1,1,
  0,0,0,1,0,0,0,1,0,0,0,0,0,0,0,1,0,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,1,0,1,1,1,0,1,0,1,0,1,1,0,1,0,1,1,0,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,0,0,1,0,1,0,0,1,1,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,1,0,1,1,0,0,0,0,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  0,0,1,0,1,0,0,1,0,0,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,0,0,1,1,1,0,0,1,1,0,0,1,1,1,1,1,1,0,1,1,1,1,0,1,1,
  1,0,0,1,0,0,1,0,0,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,1,1,1,1,0,1,1,1,1,1,1,1,1,1,0,
  0,0,1,0,1,1,1,1,0,0,0,1,1,0,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,1,0,0,1,1,0,1,1,1,1,1,1,1,1,1,1,0,
  0,0,0,0,1,0,0,1,0,0,1,1,0,1,1,1,0,1,1,1,1,1,1,0,0,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,0,1,1,0,1,0,0,1,0,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  0,0,0,1,1,0,1,1,0,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,0,0,1,1,1,0,1,0,1,0,1,1,1,1,1,1,1,0,1,1,1,0,1,1,1,
  0,0,1,0,0,1,1,1,0,1,1,1,1,1,1,1,0,1,1,1,1,0,1,1,0,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,1,0,0,0,0,0,0,0,1,0,0,0,0,1,0,0,1,
  0,0,0,1,0,0,0,1,0,0,0,0,0,0,0,1,0,1,0,0,0,0,0,1,1,0,0,1,0,0,1,1,
  0,0,0,0,0,0,0,1,0,1,1,1,0,1,0,1,0,0,1,0,0,0,0,1,0,1,0,1,0,1,0,1,
  0,0,0,0,0,0,0,0,0,1,0,1,0,0,0,1,1,0,0,0,0,0,0,0,1,1,1,1,0,1,1,1,
  0,0,0,0,0,0,0,1,0,1,0,0,0,0,0,1,0,1,1,0,1,0,1,1,0,0,0,1,0,0,1,1,
  0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,0,0,1,0,1,0,0,0,1,0,0,0,0,0,0,0,1,0,1,1,1,0,0,1,1,
  0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,1,1,0,1,1,0,1,1,1,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,1,1,0,0,0,0,1,1,0,0,0,0,0,0,1,
  0,0,1,0,0,1,1,1,0,0,0,0,1,0,0,1,0,0,0,1,1,1,1,0,1,0,1,1,1,1,1,1,
  0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,1,0,1,0,1,1,0,
  0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,1,0,0,0,0,1,0,1,1,1,0,1,1,1,
  0,0,0,0,0,0,1,1,0,0,0,0,0,0,0,1,0,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  0,1,1,0,1,0,0,0,1,1,0,1,0,0,0,0,1,1,1,1,0,0,1,1,1,0,1,1,0,0,1,1,
  0,0,0,0,0,0,0,0,1,1,0,1,0,0,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,1,0,0,1,1,0,1,1,1,1,1,1,1,1,1,1,1,
  0,0,1,1,0,0,1,1,0,0,1,1,0,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,1,0,1,1,1,0,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  0,0,0,1,0,0,0,1,0,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,1,1,1,1,1,0,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  0,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,
  0,0,0,1,0,0,1,0,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,1,0,0,0,1,0,0,1,0,0,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,
  0,0,1,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,0,0,1,1,0,0,0,1,0,1,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1,
  0,0,1,1,1,1,1,1,0,0,1,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  0,0,0,1,0,0,0,0,1,1,1,1,1,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,
  0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,1,0,0,1,0,0,0,1,1,0,0,0,0,0,0,0,1,0,0,0,1,1,0,1,1,
  0,0,0,1,0,0,0,1,0,0,1,0,0,0,1,1,0,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,1,0,1,1,1,0,1,0,1,0,0,1,0,1,0,1,1,0,1,1,1,0,1,1,1,
  0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,1,1,0,1,1,1,1,1,0,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,1,1,1,0,0,0,0,0,1,0,1,0,1,1,0,1,1,0,1,1,1,1,1,1,1,
  0,0,0,0,1,0,0,1,0,0,1,1,0,0,1,1,0,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,0,0,1,0,1,0,0,0,1,0,0,1,1,0,1,1,1,1,1,1,1,1,0,1,1,
  1,0,1,0,1,0,0,1,1,0,1,1,0,0,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,1,1,1,0,0,0,1,1,0,1,1,0,1,1,1,
  0,0,1,0,0,0,0,1,0,0,0,0,0,0,1,1,0,1,1,1,0,1,0,1,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,1,0,1,1,1,0,1,1,0,1,1,1,1,
  0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,0,1,1,0,0,0,0,0,1,0,1,1,1,0,1,0,1,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,1,1,0,1,0,1,0,1,1,0,1,0,1,0,0,0,1,1,1,1,1,1,1,1,1,
  1,1,1,0,1,0,0,0,1,1,0,1,0,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,1,1,
  1,0,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,1,0,0,1,0,0,0,1,1,0,0,0,0,0,0,0,1,0,0,0,1,1,0,1,1,
  0,0,1,1,0,0,0,1,0,0,0,0,0,0,0,1,0,1,0,1,0,0,1,1,0,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,1,0,1,1,1,0,1,0,1,0,0,1,0,1,0,0,1,0,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,0,0,1,0,1,0,0,0,1,1,0,1,1,0,1,1,0,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,1,1,1,1,0,0,0,0,0,0,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1,
  0,0,0,0,1,0,1,0,0,0,1,1,1,0,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,0,0,1,1,1,0,0,0,1,0,1,1,1,1,1,1,1,1,1,1,1,1,0,1,1,
  1,0,0,0,1,0,0,0,0,1,1,1,0,1,0,1,1,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,1,1,0,0,0,0,1,1,1,1,1,0,1,1,0,
  0,0,1,1,1,1,1,1,0,0,0,0,1,0,0,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,1,0,1,1,1,0,1,1,1,1,1,1,1,
  0,0,0,0,1,0,0,0,0,0,0,1,0,0,1,1,0,1,1,1,1,1,1,0,0,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,
  0,0,1,0,1,0,1,1,0,0,1,0,1,1,1,1,0,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,0,0,1,1,1,0,0,0,1,0,1,1,1,1,1,1,1,0,1,1,1,0,1,1,1,
  0,0,1,0,1,0,1,1,0,1,1,1,1,1,1,1,0,0,1,1,1,0,1,1,0,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,1,0,0,0,0,0,0,0,1,0,0,0,0,1,0,0,1,
  0,0,0,1,0,0,0,1,0,0,0,0,0,0,0,1,0,1,0,0,0,0,0,1,0,0,0,0,0,0,0,1,
  0,0,0,0,0,0,0,1,0,1,1,1,0,1,0,1,0,0,1,0,0,0,0,1,0,1,0,1,0,1,0,1,
  0,0,0,0,0,0,0,0,0,1,0,1,0,0,0,1,1,0,0,0,0,0,0,0,0,1,0,1,0,0,1,1,
  0,0,0,0,0,0,0,1,0,1,0,0,0,0,0,1,0,1,0,0,1,0,0,1,0,0,0,0,0,0,0,1,
  0,0,0,0,1,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,1,0,0,1,1,
  0,0,0,0,0,0,0,0,0,1,0,1,0,0,0,1,0,0,0,0,0,0,0,0,0,1,0,1,0,0,1,1,
  1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,1,0,0,0,1,0,0,1,1,0,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,1,1,0,0,0,0,1,1,0,0,0,0,0,0,0,
  0,0,1,0,0,0,0,1,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,1,0,0,0,1,0,0,1,1,
  0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,
  0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,1,1,
  0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,1,1,
  0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,1,0,1,0,1,0,0,0,1,0,1,1,1,1,1,1,1,
  0,0,0,0,0,0,0,0,0,1,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,1,1,1,0,0,1,1,
  0,0,0,0,0,0,0,1,0,1,0,1,0,1,0,0,0,0,1,1,0,0,0,1,0,1,1,1,0,1,1,1
};

/*
 * Deterministic prediction tables given by ITU-T T.82 tables
 * 19 to 22. The table below is organized differently, the
 * index bits are permutated for higher efficiency.
 */

static char jbg_dptable[256 + 512 + 2048 + 4096] = {
  /* phase 0: offset=0 */
  0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,
  0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,0,2,2,2,2,2,2,0,2,2,2,2,2,2,2,
  0,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,0,0,2,2,2,2,2,2,0,2,0,2,2,2,2,2,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  /* phase 1: offset=256 */
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,
  0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,0,2,2,2,2,2,0,2,0,2,2,2,2,2,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,
  0,2,2,2,2,1,2,1,2,2,2,2,1,1,1,1,2,0,2,0,2,2,2,2,0,2,0,2,2,2,2,2,
  0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,0,0,2,2,2,2,0,2,2,2,2,2,2,2,
  0,2,0,2,2,2,2,2,2,2,2,2,2,0,2,0,2,2,0,0,2,2,2,2,2,0,0,2,2,2,2,2,
  0,2,2,2,2,1,2,1,2,2,2,2,1,1,1,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,
  1,2,1,2,2,2,2,2,2,2,2,2,2,1,2,2,2,2,1,1,2,2,2,2,2,0,2,2,2,2,2,2,
  2,2,2,2,2,0,2,0,2,2,2,2,0,0,0,0,0,2,0,2,2,2,2,2,0,2,2,2,2,2,2,2,
  0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,0,2,2,2,2,0,2,0,2,2,2,2,2,
  2,2,2,2,2,1,1,1,2,2,2,2,1,1,1,1,1,2,1,2,2,2,2,2,2,2,2,2,2,2,2,1,
  2,2,2,2,2,2,2,2,2,2,2,2,2,0,1,2,0,2,0,2,2,2,2,2,0,2,0,2,2,2,2,1,
  0,2,0,2,2,1,2,1,2,2,2,2,1,1,1,1,0,0,0,0,2,2,2,2,0,2,0,2,2,2,2,1,
  2,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,2,2,0,0,0,2,2,2,2,2,
  2,2,2,2,2,1,2,1,2,2,2,2,2,2,2,1,2,2,2,2,2,2,2,2,1,2,1,2,2,2,2,1,
  2,2,2,2,2,2,2,2,0,2,0,2,2,1,2,2,2,2,2,2,2,2,2,2,0,0,0,2,2,2,2,2,
  /* phase 2: offset=768 */
  2,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,2,2,2,2,1,1,1,1,
  0,2,2,2,2,1,2,1,2,2,2,2,1,2,1,2,0,0,0,0,1,1,1,1,0,0,0,0,1,1,1,1,
  2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,0,2,2,1,2,1,2,2,2,2,2,1,1,1,
  2,0,2,2,2,1,2,1,0,2,2,2,1,2,1,2,2,2,2,0,2,2,2,2,0,2,0,2,2,2,2,2,
  0,2,0,0,1,1,1,1,2,2,2,2,1,1,1,1,0,2,0,2,1,1,1,1,2,2,2,2,1,1,1,1,
  2,2,0,2,2,2,1,2,2,2,2,2,1,2,1,2,2,2,0,2,2,1,2,1,0,2,0,2,1,1,1,1,
  2,0,0,2,2,2,2,2,0,2,0,2,2,0,2,0,2,0,2,0,2,2,2,1,2,2,0,2,1,1,2,1,
  2,2,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,1,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,2,2,2,2,1,1,1,1,
  0,0,0,0,2,2,2,2,0,0,0,0,2,2,2,2,0,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,2,0,2,2,2,2,1,0,2,2,2,1,1,1,1,2,0,2,2,2,2,2,2,0,2,0,2,2,1,2,1,
  2,0,2,0,2,2,2,2,0,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,2,2,
  0,2,2,2,1,2,1,2,2,2,2,2,2,2,2,2,0,2,2,2,2,2,1,2,2,2,2,2,2,2,2,2,
  2,2,0,2,2,2,2,2,2,2,2,2,2,2,0,2,2,0,0,2,2,1,2,1,0,2,2,2,1,1,1,1,
  2,2,2,0,2,2,2,2,2,2,0,2,2,0,2,0,2,1,2,2,2,2,2,2,1,2,1,2,2,2,2,2,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,0,2,2,2,1,
  0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,2,1,1,1,2,2,2,2,1,1,1,1,
  2,2,2,1,2,2,2,2,2,2,1,2,0,0,0,0,2,2,0,2,2,1,2,2,2,2,2,2,1,1,1,1,
  2,0,0,0,2,2,2,2,0,2,2,2,2,2,2,0,2,2,2,0,2,2,2,2,2,0,0,2,2,2,2,2,
  2,2,2,2,2,2,2,2,2,2,0,2,2,1,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,1,
  0,2,0,2,2,1,1,2,2,2,2,2,2,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,
  2,0,2,0,2,1,2,1,0,2,0,2,2,2,1,2,2,0,2,0,2,2,2,2,0,2,0,2,2,2,1,2,
  2,2,2,0,2,2,2,2,2,2,0,2,2,2,2,2,2,2,1,2,2,2,2,2,2,0,1,2,2,2,2,1,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,
  0,2,2,2,1,2,1,2,2,2,2,2,2,2,2,2,0,2,2,2,2,2,1,2,2,2,2,2,2,2,2,2,
  2,0,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,0,0,2,2,1,2,1,0,2,2,2,1,1,1,1,
  2,0,2,0,2,1,2,2,0,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,0,2,2,1,2,2,
  2,0,2,2,2,2,2,2,2,0,2,2,2,2,2,2,2,0,2,0,2,2,2,2,0,0,0,0,2,1,2,1,
  2,2,2,2,2,2,2,0,2,2,2,2,2,2,2,0,2,2,2,2,2,1,2,0,0,2,2,2,1,2,2,2,
  0,0,2,0,2,2,2,2,0,2,0,2,2,0,2,0,1,1,1,2,2,2,2,2,2,2,2,2,2,1,1,1,
  2,2,2,2,2,2,2,2,2,0,2,2,2,2,2,1,2,2,2,2,2,2,2,2,2,0,2,0,2,2,2,1,
  2,2,0,0,2,2,2,2,2,2,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,2,2,2,2,1,1,1,1,
  0,2,2,2,1,2,1,2,2,2,2,2,2,2,2,2,0,2,2,2,2,2,1,2,2,2,2,2,2,2,2,2,
  2,0,0,2,2,2,2,2,0,2,0,2,2,2,2,2,1,0,1,2,2,2,2,1,0,2,2,2,1,1,1,1,
  2,2,2,2,2,2,2,2,2,2,0,2,2,0,2,0,2,1,2,2,2,2,2,2,2,2,0,2,2,1,2,2,
  0,2,0,0,1,1,1,1,0,2,2,2,1,1,1,1,2,2,2,2,2,2,2,2,2,0,2,2,1,2,1,1,
  2,2,0,2,2,1,2,2,2,2,2,2,1,2,2,2,2,0,2,2,2,2,2,2,0,2,0,2,1,2,1,1,
  2,0,2,0,2,2,2,2,0,2,0,2,2,1,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,2,2,1,
  2,2,2,2,2,2,2,2,2,0,2,2,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,
  0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  0,2,2,2,2,0,2,0,2,2,2,2,0,0,0,0,2,2,2,2,2,1,1,2,2,2,2,2,1,2,2,2,
  2,0,2,2,2,1,2,1,0,2,2,2,2,2,1,2,2,0,2,0,2,2,2,2,0,2,0,2,2,1,2,2,
  0,2,0,0,2,2,2,2,1,2,2,2,2,2,2,0,2,1,2,2,2,2,2,2,1,2,2,2,2,2,2,2,
  0,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,2,1,0,2,2,
  0,0,0,2,2,1,1,1,2,2,2,2,1,2,2,2,2,0,2,0,2,2,2,1,2,2,2,2,1,2,1,2,
  0,0,0,0,2,2,2,2,2,2,0,2,2,1,2,2,2,1,2,1,2,2,2,2,1,2,1,2,0,2,2,2,
  2,0,2,0,2,2,2,2,2,0,2,2,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,
  0,2,2,2,1,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,1,2,2,2,2,2,0,2,2,1,2,2,0,0,0,2,2,2,2,2,1,2,2,0,2,2,2,1,2,1,2,
  2,0,2,0,2,2,2,2,0,2,0,2,2,1,2,2,0,2,0,0,2,2,2,2,2,2,2,2,2,1,2,2,
  2,2,2,2,2,2,2,2,2,0,2,2,2,2,2,1,2,2,2,2,2,2,2,2,2,0,2,0,2,2,2,1,
  1,2,0,2,2,1,2,1,2,2,2,2,1,2,2,2,2,0,2,0,2,2,2,2,2,0,2,2,1,1,1,1,
  0,2,2,2,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,0,2,2,1,2,1,
  2,2,0,0,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,
  2,2,2,0,2,2,2,2,2,2,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,2,2,2,2,2,2,2,1,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,0,2,
  2,0,2,0,2,2,2,2,2,1,1,2,2,2,2,2,2,2,2,2,2,2,2,1,0,2,0,2,2,2,1,2,
  2,0,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,
  2,0,2,0,2,2,2,2,2,0,2,0,2,2,2,2,2,0,2,0,2,2,2,2,0,0,0,0,2,1,2,1,
  2,2,2,2,2,1,2,1,0,2,0,2,2,2,2,2,2,0,2,0,2,2,2,2,0,2,0,2,2,2,2,1,
  2,0,2,0,2,2,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,0,
  2,0,2,0,2,2,2,1,2,2,2,0,2,2,2,1,2,0,2,0,2,2,2,2,0,0,0,2,2,2,2,1,
  2,0,2,0,2,2,2,2,2,2,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,2,
  /* phase 3: offset=2816 */
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,0,0,0,1,1,1,1,0,0,0,0,1,1,1,1,
  0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,1,2,1,2,0,2,0,1,2,1,2,0,2,0,2,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,2,0,2,2,2,1,2,0,2,2,2,1,2,2,2,2,0,2,0,2,1,2,1,0,0,0,0,1,1,1,1,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,0,2,2,2,1,2,
  2,2,2,1,2,2,2,0,1,1,1,1,0,0,0,0,2,2,2,2,2,2,2,2,2,0,2,0,2,1,2,1,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,0,0,0,0,1,1,1,1,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,0,2,1,2,1,0,0,0,0,1,1,1,1,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,1,2,0,2,0,2,
  2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,0,2,0,2,1,2,1,2,0,2,0,2,1,2,1,
  2,0,0,0,2,1,1,1,0,0,0,0,1,1,1,1,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,
  2,0,2,2,2,1,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,0,0,2,0,1,1,2,1,
  2,2,2,0,2,2,2,1,2,1,2,2,2,0,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,0,0,0,1,1,1,1,0,0,0,0,1,1,1,1,
  0,0,0,0,1,1,1,1,0,0,0,0,1,1,1,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  0,0,0,0,1,1,1,1,0,0,0,0,1,1,1,1,2,0,2,0,2,1,2,1,0,0,0,0,1,1,1,1,
  2,0,0,2,2,1,1,2,2,2,2,2,2,2,2,2,2,1,2,1,2,0,2,0,2,1,1,1,2,0,0,0,
  2,1,2,1,2,0,2,0,1,2,1,2,0,2,0,2,2,2,2,0,2,2,2,1,2,0,2,0,2,1,2,1,
  2,0,2,0,2,1,2,1,0,0,0,0,1,1,1,1,2,2,2,2,2,2,2,2,2,0,2,0,2,1,2,1,
  2,2,2,2,2,2,2,2,2,0,0,0,2,1,1,1,2,2,2,2,2,2,2,2,2,0,2,0,2,1,2,1,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,
  0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,
  2,0,0,0,2,1,1,1,0,0,0,0,1,1,1,1,2,0,2,0,2,1,2,1,0,0,2,0,1,1,2,1,
  2,2,1,2,2,2,0,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,0,0,0,2,1,1,1,
  2,2,2,1,2,2,2,0,2,1,1,1,2,0,0,0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,1,2,1,2,0,2,0,1,2,1,2,0,2,0,2,
  2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,
  2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,0,0,0,2,1,1,1,0,0,0,0,1,1,1,1,
  2,0,2,2,2,1,2,2,0,0,2,0,1,1,2,1,2,1,2,1,2,0,2,0,2,2,2,2,2,2,2,2,
  2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,0,0,0,0,1,1,1,1,
  2,0,0,0,2,1,1,1,0,0,0,0,1,1,1,1,2,2,2,2,2,2,2,2,2,1,0,2,2,0,1,2,
  2,2,2,1,2,2,2,0,2,1,1,1,2,0,0,0,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,
  2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,
  0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,0,2,2,2,2,2,2,2,2,2,2,
  2,1,2,1,2,0,2,0,1,2,1,1,0,2,0,0,0,0,2,1,1,1,2,0,0,0,0,0,1,1,1,1,
  2,2,2,2,2,2,2,2,1,2,2,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,0,2,1,2,1,2,0,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,2,2,0,2,2,2,1,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,2,2,2,2,2,2,2,2,1,2,2,2,0,2,2,2,2,0,2,2,2,1,2,2,2,0,0,2,2,1,1,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,
  0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,0,2,2,2,2,2,2,2,2,2,
  2,0,2,0,2,1,2,1,0,0,0,0,1,1,1,1,2,2,2,2,2,2,2,2,0,0,0,0,1,1,1,1,
  2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,0,0,0,2,1,1,1,
  2,2,2,0,2,2,2,1,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,
  2,0,2,2,2,1,2,2,2,0,2,0,2,1,2,1,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,
  2,1,2,1,2,0,2,0,1,2,1,2,0,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,1,2,1,2,0,2,0,1,2,1,1,0,2,0,0,2,0,2,2,2,1,2,2,0,2,1,2,1,2,0,2,
  2,2,2,1,2,2,2,0,2,2,1,2,2,2,0,2,2,1,2,2,2,0,2,2,2,2,0,2,2,2,1,2,
  0,0,2,0,1,1,2,1,0,0,1,0,1,1,0,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,2,2,0,2,2,2,1,1,2,2,2,0,2,2,2,0,0,0,0,1,1,1,1,0,0,0,0,1,1,1,1,
  2,2,2,2,2,2,2,2,2,1,2,2,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,
  2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,2,0,0,2,2,1,1,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,0,0,0,1,1,1,1,0,0,0,0,1,1,1,1,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,
  0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,0,2,2,2,2,2,2,2,2,2,
  2,0,0,0,2,1,1,1,0,0,0,0,1,1,1,1,2,2,2,1,2,2,2,0,2,1,2,1,2,0,2,0,
  2,1,2,2,2,0,2,2,2,2,2,2,2,2,2,2,0,2,0,0,1,2,1,1,2,0,0,0,2,1,1,1,
  2,2,2,2,2,2,2,2,2,1,1,1,2,0,0,0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,2,2,0,2,2,2,1,2,2,0,2,2,2,1,2,2,1,2,1,2,0,2,0,2,0,2,2,2,1,2,2,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,0,2,2,2,1,1,1,2,0,0,0,
  2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,0,2,0,0,1,2,1,1,
  2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,0,2,2,2,1,2,2,2,
  2,1,2,1,2,0,2,0,2,1,2,2,2,0,2,2,2,2,2,0,2,2,2,1,2,0,2,0,2,1,2,1,
  2,0,2,0,2,1,2,1,0,2,0,2,1,2,1,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,
  2,2,2,2,2,2,2,2,0,2,0,2,1,2,1,2,2,2,2,2,2,2,2,2,0,1,0,0,1,0,1,1,
  2,2,2,2,2,2,2,2,2,1,2,2,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  0,0,0,0,1,1,1,1,0,0,0,0,1,1,1,1,2,2,1,2,2,2,0,2,2,2,2,2,2,2,2,2,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,1,2,2,1,0,2,0,2,2,2,1,2,2,2,
  2,2,2,2,2,2,2,2,1,2,2,2,0,2,2,2,2,2,2,0,2,2,2,1,2,2,0,2,2,2,1,2,
  2,0,2,0,2,1,2,1,0,2,0,2,1,2,1,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,
  0,2,0,0,1,2,1,1,2,0,0,0,2,1,1,1,2,2,2,2,2,2,2,2,1,0,1,2,0,1,0,2,
  2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,1,2,2,2,0,2,2,1,1,2,2,0,0,2,2,
  0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,1,2,1,2,0,2,0,2,1,2,2,2,0,2,2,2,0,2,2,2,1,2,2,0,2,2,2,1,2,2,2,
  0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,1,2,2,2,0,2,2,2,
  2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,0,2,1,2,1,2,
  0,0,0,0,1,1,1,1,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,1,2,0,2,0,2,2,0,2,2,2,1,2,
  2,0,2,0,2,1,2,1,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,
  0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,
  2,2,2,1,2,2,2,0,1,1,2,1,0,0,2,0,2,0,2,2,2,1,2,2,0,2,2,2,1,2,2,2,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,0,2,2,2,2,0,2,2,2,1,2,
  2,0,2,0,2,1,2,1,0,2,0,2,1,2,1,2,2,2,2,2,2,2,2,2,2,1,2,2,2,0,2,2,
  0,2,0,0,1,2,1,1,0,2,0,2,1,2,1,2,2,2,2,2,2,2,2,2,0,0,0,2,1,1,1,2,
  2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,
  2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,0,0,2,1,1,1,2,0,0,2,2,2,1,2,2,2,
  2,1,2,1,2,0,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,0,0,1,2,1,1,
  0,0,2,2,1,1,2,2,0,2,1,2,1,2,0,2,2,1,2,1,2,0,2,0,1,2,1,2,0,2,0,2,
  2,2,2,2,2,2,2,2,1,2,1,2,0,2,0,2,2,2,2,2,2,2,2,2,2,0,2,0,2,1,2,1,
  2,2,0,0,2,2,1,1,2,2,0,0,2,2,1,1,2,2,2,2,2,2,2,2,2,2,0,0,2,2,1,1,
  2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,0,2,0,0,1,2,1,1,
  2,2,2,0,2,2,2,1,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,1,1,1,2,0,0,0,2,
  2,2,2,2,2,2,2,2,1,1,1,2,0,0,0,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,
  2,0,2,0,2,1,2,1,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,0,0,0,2,1,1,1,
  2,0,2,2,2,1,2,2,0,2,2,2,1,2,2,2,2,0,2,0,2,1,2,1,2,2,2,2,2,2,2,2,
  2,0,2,0,2,1,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,0,2,0,2,1,2,1,2,1,2,0,2,0,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,0,2,0,2,1,2,1,1,2,1,2,0,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,2,2,2,2,2,2,2,1,2,1,2,0,2,0,2,2,1,2,1,2,0,2,0,2,2,2,2,2,2,2,2,
  2,0,2,1,2,1,2,0,0,2,1,2,1,2,0,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,
  2,0,2,0,2,1,2,1,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,0,2,0,2,1,2,1,
  2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,1,2,1,2,0,2,0,1,1,1,2,0,0,0,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,
  2,0,2,0,2,1,2,1,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
  2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
};


/*
 * Initialize the status struct for the encoder.
 */
void jbg_enc_init(struct jbg_enc_state *s, unsigned long x, unsigned long y,
                  int planes, unsigned char **p,
                  void (*data_out)(unsigned char *start, size_t len,
				   void *file),
		  void *file)
{
  unsigned long l, lx;
  int i;

  assert(x > 0 && y > 0 && planes > 0 && planes < 256);
  s->xd = x;
  s->yd = y;
  s->yd1 = y; /* This is the hight initially announced in BIH. To provoke
                 generation of NEWLEN for T.85 compatibility tests,
                 overwrite with new value s->yd1 > s->yd  */
  s->planes = planes;
  s->data_out = data_out;
  s->file = file;

  s->d = 0;
  s->dl = 0;
  s->dh = s->d;
  jbg_set_default_l0(s);
  s->mx = 8;
  s->my = 0;
  s->order = JBG_ILEAVE | JBG_SMID;
  s->options = JBG_TPBON | JBG_TPDON | JBG_DPON;
  s->comment = NULL;
  s->dppriv = jbg_dptable;
  s->res_tab = jbg_resred;
  
  s->highres = (int *) checked_malloc(planes, sizeof(int));
  s->lhp[0] = p;
  s->lhp[1] = (unsigned char **)
    checked_malloc(planes, sizeof(unsigned char *));
  for (i = 0; i < planes; i++) {
    s->highres[i] = 0;
    s->lhp[1][i] = (unsigned char *)
      checked_malloc(jbg_ceil_half(y, 1), jbg_ceil_half(x, 1+3));
  }
  
  s->free_list = NULL;
  s->s = (struct jbg_arenc_state *) 
    checked_malloc(s->planes, sizeof(struct jbg_arenc_state));
  s->tx = (int *) checked_malloc(s->planes, sizeof(int));
  lx = jbg_ceil_half(x, 1);
  s->tp = (char *) checked_malloc(lx, sizeof(char));
  for (l = 0; l < lx; s->tp[l++] = 2) ;
  s->sde = NULL;

  return;
}


/*
 * This function selects the number of differential layers based on
 * the maximum size requested for the lowest resolution layer. If
 * possible, a number of differential layers is selected, which will
 * keep the size of the lowest resolution layer below or equal to the
 * given width x and height y. However not more than 6 differential
 * resolution layers will be used. In addition, a reasonable value for
 * l0 (height of one stripe in the lowest resolution layer) is
 * selected, which obeys the recommended limitations for l0 in annex A
 * and C of the JBIG standard. The selected number of resolution layers
 * is returned. 
 */
int jbg_enc_lrlmax(struct jbg_enc_state *s, unsigned long x, 
		   unsigned long y)
{
  for (s->d = 0; s->d < 6; s->d++)
    if (jbg_ceil_half(s->xd, s->d) <= x && jbg_ceil_half(s->yd, s->d) <= y)
      break;
  s->dl = 0;
  s->dh = s->d;
  jbg_set_default_l0(s);
  return s->d;
}


/*
 * As an alternative to jbg_enc_lrlmax(), the following function allows
 * to specify the number of layers directly. The stripe height and layer
 * range is also adjusted automatically here.
 */
void jbg_enc_layers(struct jbg_enc_state *s, int d)
{
  if (d < 0 || d > 31)
    return;
  s->d  = d;
  s->dl = 0;
  s->dh = s->d;
  jbg_set_default_l0(s);
  return;
}


/*
 * Specify the highest and lowest resolution layers which will be
 * written to the output file. Call this function not before
 * jbg_enc_layers() or jbg_enc_lrlmax(), because these two functions
 * reset the lowest and highest resolution layer to default values.
 * Negative values are ignored. The total number of layers is returned.
 */
int jbg_enc_lrange(struct jbg_enc_state *s, int dl, int dh)
{
  if (dl >= 0     && dl <= s->d) s->dl = dl;
  if (dh >= s->dl && dh <= s->d) s->dh = dh;

  return s->d;
}


/*
 * The following function allows to specify the bits describing the
 * options of the format as well as the maximum AT movement window and
 * the number of layer 0 lines per stripes.
 */
void jbg_enc_options(struct jbg_enc_state *s, int order, int options,
		     unsigned long l0, int mx, int my)
{
  if (order >= 0 && order <= 0x0f) s->order = order;
  if (options >= 0) s->options = options;
  if (l0 > 0) s->l0 = l0;
  if (mx >= 0 && my < 128) s->mx = mx;
  if (my >= 0 && my < 256) s->my = my;

  return;
}


/*
 * This function actually does all the tricky work involved in producing
 * a SDE, which is stored in the appropriate s->sde[][][] element
 * for later output in the correct order.
 */
static void encode_sde(struct jbg_enc_state *s,
		       long stripe, int layer, int plane)
{
  unsigned char *hp, *lp1, *lp2, *p0, *p1, *q1, *q2;
  unsigned long hl, ll, hx, hy, lx, ly, hbpl, lbpl;
  unsigned long line_h0 = 0, line_h1 = 0;
  unsigned long line_h2, line_h3, line_l1, line_l2, line_l3;
  struct jbg_arenc_state *se;
  unsigned long y;  /* current line number in highres image */
  unsigned long i;  /* current line number within highres stripe */
  unsigned long j;  /* current column number in highres image */
  long o;
  unsigned a, p, t;
  int ltp, ltp_old, cx;
  unsigned long c_all, c[MX_MAX + 1], cmin, cmax, clmin, clmax;
  int tmax, at_determined;
  int new_tx;
  long new_tx_line = -1;
  int reset;
  struct jbg_buf *new_jbg_buf;

#ifdef DEBUG
  static long tp_lines, tp_exceptions, tp_pixels, dp_pixels;
  static long encoded_pixels;
#endif

  /* return immediately if this stripe has already been encoded */
  if (s->sde[stripe][layer][plane] != SDE_TODO)
    return;

#ifdef DEBUG
  if (stripe == 0)
    tp_lines = tp_exceptions = tp_pixels = dp_pixels = encoded_pixels = 0;
  fprintf(stderr, "encode_sde: s/d/p = %2ld/%2d/%2d\n",
	  stripe, layer, plane);
#endif

  /* number of lines per stripe in highres image */
  hl = s->l0 << layer;
  /* number of lines per stripe in lowres image */
  ll = hl >> 1;
  /* current line number in highres image */
  y = stripe * hl;
  /* number of pixels in highres image */
  hx = jbg_ceil_half(s->xd, s->d - layer);
  hy = jbg_ceil_half(s->yd, s->d - layer);
  /* number of pixels in lowres image */
  lx = jbg_ceil_half(hx, 1);
  ly = jbg_ceil_half(hy, 1);
  /* bytes per line in highres and lowres image */
  hbpl = jbg_ceil_half(hx, 3);
  lbpl = jbg_ceil_half(lx, 3);
  /* pointer to first image byte of highres stripe */
  hp = s->lhp[s->highres[plane]][plane] + stripe * hl * hbpl;
  lp2 = s->lhp[1 - s->highres[plane]][plane] + stripe * ll * lbpl;
  lp1 = lp2 + lbpl;
  
  /* check whether we can refer to any state of a previous stripe */
  reset = (stripe == 0) || (s->options & JBG_SDRST);

  /* initialize arithmetic encoder */
  se = s->s + plane;
  arith_encode_init(se, !reset);
  s->sde[stripe][layer][plane] = jbg_buf_init(&s->free_list);
  se->byte_out = jbg_buf_write;
  se->file = s->sde[stripe][layer][plane];

  /* initialize adaptive template movement algorithm */
  c_all = 0;
  for (t = 0; t <= s->mx; t++)
    c[t] = 0;
  if (stripe == 0)    /* the SDRST case is handled at the end */
    s->tx[plane] = 0;
  new_tx = -1;
  at_determined = 0;  /* we haven't yet decided the template move */
  if (s->mx == 0)
    at_determined = 1;

  /* initialize typical prediction */
  ltp = 0;
  if (reset)
    ltp_old = 0;
  else {
    ltp_old = 1;
    p1 = hp - hbpl;
    if (y > 1) {
      q1 = p1 - hbpl;
      while (p1 < hp && (ltp_old = (*p1++ == *q1++)) != 0) ;
    } else
      while (p1 < hp && (ltp_old = (*p1++ == 0)) != 0) ;
  }

  if (layer == 0) {

    /*
     *  Encode lowest resolution layer
     */

    for (i = 0; i < hl && y < hy; i++, y++) {

      /* check whether it is worth to perform an ATMOVE */
      if (!at_determined && c_all > 2048) {
	cmin = clmin = 0xffffffffL;
	cmax = clmax = 0;
	tmax = 0;
	for (t = (s->options & JBG_LRLTWO) ? 5 : 3; t <= s->mx; t++) {
	  if (c[t] > cmax) cmax = c[t];
	  if (c[t] < cmin) cmin = c[t];
	  if (c[t] > c[tmax]) tmax = t;
	}
	clmin = (c[0] < cmin) ? c[0] : cmin;
	clmax = (c[0] > cmax) ? c[0] : cmax;
	if (c_all - cmax < (c_all >> 3) &&
	    cmax - c[s->tx[plane]] > c_all - cmax &&
	    cmax - c[s->tx[plane]] > (c_all >> 4) &&
	    /*                     ^ T.82 said < here, fixed in Cor.1/25 */
	    cmax - (c_all - c[s->tx[plane]]) > c_all - cmax &&
	    cmax - (c_all - c[s->tx[plane]]) > (c_all >> 4) &&
	    cmax - cmin > (c_all >> 2) &&
	    (s->tx[plane] || clmax - clmin > (c_all >> 3))) {
	  /* we have decided to perform an ATMOVE */
	  new_tx = tmax;
	  if (!(s->options & JBG_DELAY_AT)) {
	    new_tx_line = i;
	    s->tx[plane] = new_tx;
	  }
#ifdef DEBUG
	  fprintf(stderr, "ATMOVE: line=%ld, tx=%d, c_all=%ld\n",
		  i, new_tx, c_all);
#endif
	}
	at_determined = 1;
      }
      assert(s->tx[plane] >= 0); /* i.e., tx can safely be cast to unsigned */
      
      /* typical prediction */
      if (s->options & JBG_TPBON) {
	ltp = 1;
	p1 = hp;
	if (i > 0 || !reset) {
	  q1 = hp - hbpl;
	  while (q1 < hp && (ltp = (*p1++ == *q1++)) != 0) ;
	} else
	  while (p1 < hp + hbpl && (ltp = (*p1++ == 0)) != 0) ;
	arith_encode(se, (s->options & JBG_LRLTWO) ? TPB2CX : TPB3CX,
		     ltp == ltp_old);
#ifdef DEBUG
	tp_lines += ltp;
#endif
	ltp_old = ltp;
	if (ltp) {
	  /* skip next line */
	  hp += hbpl;
	  continue;
	}
      }

      /*
       * Layout of the variables line_h1, line_h2, line_h3, which contain
       * as bits the neighbour pixels of the currently coded pixel X:
       *
       *          76543210765432107654321076543210     line_h3
       *          76543210765432107654321076543210     line_h2
       *  76543210765432107654321X76543210             line_h1
       */
      
      line_h1 = line_h2 = line_h3 = 0;
      if (i > 0 || !reset) line_h2 = (long)*(hp - hbpl) << 8;
      if (i > 1 || !reset) line_h3 = (long)*(hp - hbpl - hbpl) << 8;
      
      /* encode line */
      for (j = 0; j < hx; hp++) {
	line_h1 |= *hp;
	if (j < hbpl * 8 - 8 && (i > 0 || !reset)) {
	  line_h2 |= *(hp - hbpl + 1);
	  if (i > 1 || !reset)
	    line_h3 |= *(hp - hbpl - hbpl + 1);
	}
	if (s->options & JBG_LRLTWO) {
	  /* two line template */
	  do {
	    line_h1 <<= 1;  line_h2 <<= 1;  line_h3 <<= 1;
	    if (s->tx[plane]) {
	      if ((unsigned) s->tx[plane] > j)
		a = 0;
	      else {
		o = (j - s->tx[plane]) - (j & ~7L);
		a = (hp[o >> 3] >> (7 - (o & 7))) & 1;
		a <<= 4;
	      }
	      assert(s->tx[plane] > 23 ||
		     a == ((line_h1 >> (4 + s->tx[plane])) & 0x010));
	      arith_encode(se, (((line_h2 >> 10) & 0x3e0) | a |
				((line_h1 >>  9) & 0x00f)),
			   (line_h1 >> 8) & 1);
	    }
	    else
	      arith_encode(se, (((line_h2 >> 10) & 0x3f0) |
				((line_h1 >>  9) & 0x00f)),
			   (line_h1 >> 8) & 1);
#ifdef DEBUG
	    encoded_pixels++;
#endif
	    /* statistics for adaptive template changes */
	    if (!at_determined && j >= s->mx && j < hx-2) {
	      p = (line_h1 & 0x100) != 0; /* current pixel value */
	      c[0] += ((line_h2 & 0x4000) != 0) == p; /* default position */
	      assert(!(((line_h2 >> 6) ^ line_h1) & 0x100) ==
		     (((line_h2 & 0x4000) != 0) == p));
	      for (t = 5; t <= s->mx && t <= j; t++) {
		o = (j - t) - (j & ~7L);
		a = (hp[o >> 3] >> (7 - (o & 7))) & 1;
		assert(t > 23 ||
		       (a == p) == !(((line_h1 >> t) ^ line_h1) & 0x100));
		c[t] += a == p;
	      }
	      for (; t <= s->mx; t++) {
		c[t] += 0 == p;
	      }
	      ++c_all;
	    }
	  } while (++j & 7 && j < hx);
	} else {
	  /* three line template */
	  do {
	    line_h1 <<= 1;  line_h2 <<= 1;  line_h3 <<= 1;
	    if (s->tx[plane]) {
	      if ((unsigned) s->tx[plane] > j)
		a = 0;
	      else {
		o = (j - s->tx[plane]) - (j & ~7L);
		a = (hp[o >> 3] >> (7 - (o & 7))) & 1;
		a <<= 2;
	      }
	      assert(s->tx[plane] > 23 ||
		     a == ((line_h1 >> (6 + s->tx[plane])) & 0x004));
	      arith_encode(se, (((line_h3 >>  8) & 0x380) |
				((line_h2 >> 12) & 0x078) | a |
				((line_h1 >>  9) & 0x003)),
			   (line_h1 >> 8) & 1);
	    } else
	      arith_encode(se, (((line_h3 >>  8) & 0x380) |
				((line_h2 >> 12) & 0x07c) |
				((line_h1 >>  9) & 0x003)),
			   (line_h1 >> 8) & 1);
#ifdef DEBUG
	    encoded_pixels++;
#endif
	    /* statistics for adaptive template changes */
	    if (!at_determined && j >= s->mx && j < hx-2) {
	      p = (line_h1 & 0x100) != 0; /* current pixel value */
	      c[0] += ((line_h2 & 0x4000) != 0) == p; /* default position */
	      assert(!(((line_h2 >> 6) ^ line_h1) & 0x100) ==
		     (((line_h2 & 0x4000) != 0) == p));
	      for (t = 3; t <= s->mx && t <= j; t++) {
		o = (j - t) - (j & ~7L);
		a = (hp[o >> 3] >> (7 - (o & 7))) & 1;
		assert(t > 23 ||
		       (a == p) == !(((line_h1 >> t) ^ line_h1) & 0x100));
		c[t] += a == p;
	      }
	      for (; t <= s->mx; t++) {
		c[t] += 0 == p;
	      }
	      ++c_all;
	    }
	  } while (++j & 7 && j < hx);
	} /* if (s->options & JBG_LRLTWO) */
      } /* for (j = ...) */
    } /* for (i = ...) */

  } else {

    /*
     *  Encode differential layer
     */
    
    for (i = 0; i < hl && y < hy; i++, y++) {

      /* check whether it is worth to perform an ATMOVE */
      if (!at_determined && c_all > 2048) {
	cmin = clmin = 0xffffffffL;
	cmax = clmax = 0;
	tmax = 0;
	for (t = 3; t <= s->mx; t++) {
	  if (c[t] > cmax) cmax = c[t];
	  if (c[t] < cmin) cmin = c[t];
	  if (c[t] > c[tmax]) tmax = t;
	}
	clmin = (c[0] < cmin) ? c[0] : cmin;
	clmax = (c[0] > cmax) ? c[0] : cmax;
	if (c_all - cmax < (c_all >> 3) &&
	    cmax - c[s->tx[plane]] > c_all - cmax &&
	    cmax - c[s->tx[plane]] > (c_all >> 4) &&
	    /*                     ^ T.82 said < here, fixed in Cor.1/25 */
	    cmax - (c_all - c[s->tx[plane]]) > c_all - cmax &&
	    cmax - (c_all - c[s->tx[plane]]) > (c_all >> 4) &&
	    cmax - cmin > (c_all >> 2) &&
	    (s->tx[plane] || clmax - clmin > (c_all >> 3))) {
	  /* we have decided to perform an ATMOVE */
	  new_tx = tmax;
	  if (!(s->options & JBG_DELAY_AT)) {
	    new_tx_line = i;
	    s->tx[plane] = new_tx;
	  }
#ifdef DEBUG
	  fprintf(stderr, "ATMOVE: line=%ld, tx=%d, c_all=%ld\n",
		  i, new_tx, c_all);
#endif
	}
	at_determined = 1;
      }
      
      if ((i >> 1) >= ll - 1 || (y >> 1) >= ly - 1)
	lp1 = lp2;

      /* typical prediction */
      if (s->options & JBG_TPDON && (i & 1) == 0) {
	q1 = lp1; q2 = lp2;
	p0 = p1 = hp;
	if (i < hl - 1 && y < hy - 1)
	  p0 = hp + hbpl;
	if (i > 1 || !reset)
	  line_l3 = (long)*(q2 - lbpl) << 8;
	else
	  line_l3 = 0;
	line_l2 = (long)*q2 << 8;
	line_l1 = (long)*q1 << 8;
	ltp = 1;
	for (j = 0; j < lx && ltp; q1++, q2++) {
	  if (j < lbpl * 8 - 8) {
	    if (i > 1 || !reset)
	      line_l3 |= *(q2 - lbpl + 1);
	    line_l2 |= *(q2 + 1);
	    line_l1 |= *(q1 + 1);
	  }
	  do {
	    if ((j >> 2) < hbpl) {
	      line_h1 = *(p1++);
	      line_h0 = *(p0++);
	    }
	    do {
	      line_l3 <<= 1;
	      line_l2 <<= 1;
	      line_l1 <<= 1;
	      line_h1 <<= 2;
	      line_h0 <<= 2;
	      cx = (((line_l3 >> 15) & 0x007) |
		    ((line_l2 >> 12) & 0x038) |
		    ((line_l1 >> 9)  & 0x1c0));
	      if (cx == 0x000)
		if ((line_h1 & 0x300) == 0 && (line_h0 & 0x300) == 0)
		  s->tp[j] = 0;
		else {
		  ltp = 0;
#ifdef DEBUG
		  tp_exceptions++;
#endif
		}
	      else if (cx == 0x1ff)
		if ((line_h1 & 0x300) == 0x300 && (line_h0 & 0x300) == 0x300)
		  s->tp[j] = 1;
		else {
		  ltp = 0;
#ifdef DEBUG
		  tp_exceptions++;
#endif
		}
	      else
		s->tp[j] = 2;
	    } while (++j & 3 && j < lx);
	  } while (j & 7 && j < lx);
	} /* for (j = ...) */
	arith_encode(se, TPDCX, !ltp);
#ifdef DEBUG
	tp_lines += ltp;
#endif
      }


      /*
       * Layout of the variables line_h1, line_h2, line_h3, which contain
       * as bits the high resolution neighbour pixels of the currently coded
       * highres pixel X:
       *
       *            76543210 76543210 76543210 76543210     line_h3
       *            76543210 76543210 76543210 76543210     line_h2
       *   76543210 76543210 7654321X 76543210              line_h1
       *
       * Layout of the variables line_l1, line_l2, line_l3, which contain
       * the low resolution pixels near the currently coded pixel as bits.
       * The lowres pixel in which the currently coded highres pixel is
       * located is marked as Y:
       *
       *            76543210 76543210 76543210 76543210     line_l3
       *            76543210 7654321Y 76543210 76543210     line_l2
       *            76543210 76543210 76543210 76543210     line_l1
       */
      

      line_h1 = line_h2 = line_h3 = line_l1 = line_l2 = line_l3 = 0;
      if (i > 0 || !reset) line_h2 = (long)*(hp - hbpl) << 8;
      if (i > 1 || !reset) {
	line_h3 = (long)*(hp - hbpl - hbpl) << 8;
	line_l3 = (long)*(lp2 - lbpl) << 8;
      }
      line_l2 = (long)*lp2 << 8;
      line_l1 = (long)*lp1 << 8;
      
      /* encode line */
      for (j = 0; j < hx; lp1++, lp2++) {
	if ((j >> 1) < lbpl * 8 - 8) {
	  if (i > 1 || !reset)
	    line_l3 |= *(lp2 - lbpl + 1);
	  line_l2 |= *(lp2 + 1);
	  line_l1 |= *(lp1 + 1);
	}
	do { /* ... while (j & 15 && j < hx) */

	  assert(hp - (s->lhp[s->highres[plane]][plane] +
		       (stripe * hl + i) * hbpl)
		 == (ptrdiff_t) j >> 3);

	  assert(lp2 - (s->lhp[1-s->highres[plane]][plane] +
			(stripe * ll + (i>>1)) * lbpl)
		 == (ptrdiff_t) j >> 4);

	  line_h1 |= *hp;
	  if (j < hbpl * 8 - 8) {
	    if (i > 0 || !reset) {
	      line_h2 |= *(hp - hbpl + 1);
	      if (i > 1 || !reset)
		line_h3 |= *(hp - hbpl - hbpl + 1);
	    }
	  }
	  do { /* ... while (j & 7 && j < hx) */
	    line_l1 <<= 1;  line_l2 <<= 1;  line_l3 <<= 1;
	    if (ltp && s->tp[j >> 1] < 2) {
	      /* pixel are typical and have not to be encoded */
	      line_h1 <<= 2;  line_h2 <<= 2;  line_h3 <<= 2;
#ifdef DEBUG
	      do {
		++tp_pixels;
	      } while (++j & 1 && j < hx);
#else
	      j += 2;
#endif
	    } else
	      do { /* ... while (++j & 1 && j < hx) */
		line_h1 <<= 1;  line_h2 <<= 1;  line_h3 <<= 1;

		/* deterministic prediction */
		if (s->options & JBG_DPON) {
		  if ((y & 1) == 0) {
		    if ((j & 1) == 0) {
		      /* phase 0 */
		      if (s->dppriv[((line_l3 >> 16) & 0x003) |
				    ((line_l2 >> 14) & 0x00c) |
				    ((line_h1 >> 5)  & 0x010) |
				    ((line_h2 >> 10) & 0x0e0)] < 2) {
#ifdef DEBUG
			++dp_pixels;
#endif
			continue;
		      }
		    } else {
		      /* phase 1 */
		      if (s->dppriv[(((line_l3 >> 16) & 0x003) |
				     ((line_l2 >> 14) & 0x00c) |
				     ((line_h1 >> 5)  & 0x030) |
				     ((line_h2 >> 10) & 0x1c0)) + 256] < 2) {
#ifdef DEBUG
			++dp_pixels;
#endif
			continue;
		      }
		    }
		  } else {
		    if ((j & 1) == 0) {
		      /* phase 2 */
		      if (s->dppriv[(((line_l3 >> 16) & 0x003) |
				     ((line_l2 >> 14) & 0x00c) |
				     ((line_h1 >> 5)  & 0x010) |
				     ((line_h2 >> 10) & 0x0e0) |
				     ((line_h3 >> 7) & 0x700)) + 768] < 2) {
#ifdef DEBUG
			++dp_pixels;
#endif
			continue;
		      }
		    } else {
		      /* phase 3 */
		      if (s->dppriv[(((line_l3 >> 16) & 0x003) |
				     ((line_l2 >> 14) & 0x00c) |
				     ((line_h1 >> 5)  & 0x030) |
				     ((line_h2 >> 10) & 0x1c0) |
				     ((line_h3 >> 7)  & 0xe00)) + 2816] < 2) {
#ifdef DEBUG
			++dp_pixels;
#endif
			continue;
		      }
		    }	
		  }	
		}

		/* determine context */
		if (s->tx[plane]) {
		  if ((unsigned) s->tx[plane] > j)
		    a = 0;
		  else {
		    o = (j - s->tx[plane]) - (j & ~7L);
		    a = (hp[o >> 3] >> (7 - (o & 7))) & 1;
		    a <<= 4;
		  }
		  assert(s->tx[plane] > 23 ||
			 a == ((line_h1 >> (4 + s->tx[plane])) & 0x010));
		  cx = (((line_h1 >> 9)  & 0x003) | a |
			((line_h2 >> 13) & 0x00c) |
			((line_h3 >> 11) & 0x020));
		} else
		  cx = (((line_h1 >> 9)  & 0x003) |
			((line_h2 >> 13) & 0x01c) |
			((line_h3 >> 11) & 0x020));
		if (j & 1)
		  cx |= (((line_l2 >> 9)  & 0x0c0) |
			 ((line_l1 >> 7)  & 0x300)) | (1UL << 10);
		else
		  cx |= (((line_l2 >> 10) & 0x0c0) |
			 ((line_l1 >> 8)  & 0x300));
		cx |= (y & 1) << 11;

		arith_encode(se, cx, (line_h1 >> 8) & 1);
#ifdef DEBUG
		encoded_pixels++;
#endif
		
		/* statistics for adaptive template changes */
		if (!at_determined && j >= s->mx) {
		  c[0] += !(((line_h2 >> 6) ^ line_h1) & 0x100);
		  for (t = 3; t <= s->mx; t++)
		    c[t] += !(((line_h1 >> t) ^ line_h1) & 0x100);
		  ++c_all;
		}
		
	      } while (++j & 1 && j < hx);
	  } while (j & 7 && j < hx);
	  hp++;
	} while (j & 15 && j < hx);
      } /* for (j = ...) */

      /* low resolution pixels are used twice */
      if ((i & 1) == 0) {
	lp1 -= lbpl;
	lp2 -= lbpl;
      }
      
    } /* for (i = ...) */
  }
  
  arith_encode_flush(se);
  jbg_buf_remove_zeros(s->sde[stripe][layer][plane]);
  jbg_buf_write(MARKER_ESC, s->sde[stripe][layer][plane]);
  jbg_buf_write((s->options & JBG_SDRST) ? MARKER_SDRST : MARKER_SDNORM,
		s->sde[stripe][layer][plane]);
  if (s->options & JBG_SDRST)
    s->tx[plane] = 0;

  /* add ATMOVE */
  if (new_tx != -1) {
    if (s->options & JBG_DELAY_AT) {
      /* ATMOVE will become active at the first line of the next stripe */
      s->tx[plane] = new_tx;
      jbg_buf_write(MARKER_ESC, s->sde[stripe][layer][plane]);
      jbg_buf_write(MARKER_ATMOVE, s->sde[stripe][layer][plane]);
      jbg_buf_write(0, s->sde[stripe][layer][plane]);
      jbg_buf_write(0, s->sde[stripe][layer][plane]);
      jbg_buf_write(0, s->sde[stripe][layer][plane]);
      jbg_buf_write(0, s->sde[stripe][layer][plane]);
      jbg_buf_write(s->tx[plane], s->sde[stripe][layer][plane]);
      jbg_buf_write(0, s->sde[stripe][layer][plane]);
    } else {
      /* ATMOVE has already become active during this stripe
       * => we have to prefix the SDE data with an ATMOVE marker */
      new_jbg_buf = jbg_buf_init(&s->free_list);
      jbg_buf_write(MARKER_ESC, new_jbg_buf);
      jbg_buf_write(MARKER_ATMOVE, new_jbg_buf);
      jbg_buf_write((new_tx_line >> 24) & 0xff, new_jbg_buf);
      jbg_buf_write((new_tx_line >> 16) & 0xff, new_jbg_buf);
      jbg_buf_write((new_tx_line >> 8) & 0xff, new_jbg_buf);
      jbg_buf_write(new_tx_line & 0xff, new_jbg_buf);
      jbg_buf_write(new_tx, new_jbg_buf);
      jbg_buf_write(0, new_jbg_buf);
      jbg_buf_prefix(new_jbg_buf, &s->sde[stripe][layer][plane]);
    }
  }

#if 0
  if (stripe == s->stripes - 1)
    fprintf(stderr, "tp_lines = %ld, tp_exceptions = %ld, tp_pixels = %ld, "
	    "dp_pixels = %ld, encoded_pixels = %ld\n",
	    tp_lines, tp_exceptions, tp_pixels, dp_pixels, encoded_pixels);
#endif

  return;
}


/*
 * Create the next lower resolution version of an image
 */
static void resolution_reduction(struct jbg_enc_state *s, int plane,
				 int higher_layer)
{
  unsigned long hl, ll, hx, hy, lx, ly, hbpl, lbpl;
  unsigned char *hp1, *hp2, *hp3, *lp;
  unsigned long line_h1, line_h2, line_h3, line_l2;
  unsigned long y;  /* current line number in lowres image */
  unsigned long i;  /* current line number within lowres stripe */
  unsigned long j;  /* current column number in lowres image */
  int pix, k, l;

  /* number of lines per stripe in highres image */
  hl = s->l0 << higher_layer;
  /* number of lines per stripe in lowres image */
  ll = hl >> 1;
  /* number of pixels in highres image */
  hx = jbg_ceil_half(s->xd, s->d - higher_layer);
  hy = jbg_ceil_half(s->yd, s->d - higher_layer);
  /* number of pixels in lowres image */
  lx = jbg_ceil_half(hx, 1);
  ly = jbg_ceil_half(hy, 1);
  /* bytes per line in highres and lowres image */
  hbpl = jbg_ceil_half(hx, 3);
  lbpl = jbg_ceil_half(lx, 3);
  /* pointers to first image bytes */
  hp2 = s->lhp[s->highres[plane]][plane];
  hp1 = hp2 + hbpl;
  hp3 = hp2 - hbpl;
  lp = s->lhp[1 - s->highres[plane]][plane];
  
#ifdef DEBUG
  fprintf(stderr, "resolution_reduction: plane = %d, higher_layer = %d\n",
	  plane, higher_layer);
#endif

  /*
   * Layout of the variables line_h1, line_h2, line_h3, which contain
   * as bits the high resolution neighbour pixels of the currently coded
   * lowres pixel /\:
   *              \/
   *
   *   76543210 76543210 76543210 76543210     line_h3
   *   76543210 76543210 765432/\ 76543210     line_h2
   *   76543210 76543210 765432\/ 76543210     line_h1
   *
   * Layout of the variable line_l2, which contains the low resolution
   * pixels near the currently coded pixel as bits. The lowres pixel
   * which is currently coded is marked as X:
   *
   *   76543210 76543210 76543210 76543210     line_l2
   *                            X
   */

  for (y = 0; y < ly;) {
    for (i = 0; i < ll && y < ly; i++, y++) {
      if (2*y + 1 >= hy)
	hp1 = hp2;
      pix = 0;
      line_h1 = line_h2 = line_h3 = line_l2 = 0;
      for (j = 0; j < lbpl * 8; j += 8) {
	*lp = 0;
	if (i > 0 || (y > 0 && !(s->options & JBG_SDRST)))
	  line_l2 |= *(lp-lbpl);
	for (k = 0; k < 8 && j + k < lx; k += 4) {
	  if (((j + k) >> 2) < hbpl) {
	    if (i > 0 || (y > 0 && !(s->options & JBG_SDRST)))
	      line_h3 |= *hp3;
	    ++hp3;
	    line_h2 |= *(hp2++);
	    line_h1 |= *(hp1++);
	  }
	  for (l = 0; l < 4 && j + k + l < lx; l++) {
	    line_h3 <<= 2;
	    line_h2 <<= 2;
	    line_h1 <<= 2;
	    line_l2 <<= 1;
	    pix = s->res_tab[((line_h1 >> 8) & 0x007) |
			     ((line_h2 >> 5) & 0x038) |
			     ((line_h3 >> 2) & 0x1c0) |
			     (pix << 9) | ((line_l2 << 2) & 0xc00)];
	    *lp = (*lp << 1) | pix;
	  }
	}
	++lp;
      }
      *(lp - 1) <<= lbpl * 8 - lx;
      hp1 += hbpl;
      hp2 += hbpl;
      hp3 += hbpl;
    }
  }

#ifdef DEBUG
  {
    FILE *f;
    char fn[50];
    
    sprintf(fn, "dbg_d=%02d.pbm", higher_layer - 1);
    f = fopen(fn, "wb");
    fprintf(f, "P4\n%lu %lu\n", lx, ly);
    fwrite(s->lhp[1 - s->highres[plane]][plane], 1, lbpl * ly, f);
    fclose(f);
  }
#endif

  return;
}


/* 
 * This function is called inside the three loops of jbg_enc_out() in
 * order to write the next SDE. It has first to generate the required
 * SDE and all SDEs which have to be encoded before this SDE can be
 * created. The problem here is that if we want to output a lower
 * resolution layer, we have to apply the resolution reduction
 * algorithm first to get it. As we try to safe as much memory as
 * possible, the resolution reduction will overwrite previous higher
 * resolution bitmaps. Consequently, we have to encode and buffer SDEs
 * which depend on higher resolution layers before we can start the
 * resolution reduction. All the logic about which SDE has to be
 * encoded before resolution reduction is allowed is handled
 * here. This approach may be a bit more complex than alternative ways
 * of doing it, but it minimizes the amount of temporary memory used.
 */
static void output_sde(struct jbg_enc_state *s,
		       unsigned long stripe, int layer, int plane)
{
  int lfcl;     /* lowest fully coded layer */
  long i;
  unsigned long u;
  
  assert(s->sde[stripe][layer][plane] != SDE_DONE);

  if (s->sde[stripe][layer][plane] != SDE_TODO) {
#ifdef DEBUG
    fprintf(stderr, "writing SDE: s/d/p = %2lu/%2d/%2d\n",
	    stripe, layer, plane);
#endif
    jbg_buf_output(&s->sde[stripe][layer][plane], s->data_out, s->file);
    s->sde[stripe][layer][plane] = SDE_DONE;
    return;
  }

  /* Determine the smallest resolution layer in this plane for which
   * not yet all stripes have been encoded into SDEs. This layer will
   * have to be completely coded, before we can apply the next
   * resolution reduction step. */
  lfcl = 0;
  for (i = s->d; i >= 0; i--)
    if (s->sde[s->stripes - 1][i][plane] == SDE_TODO) {
      lfcl = i + 1;
      break;
    }
  if (lfcl > s->d && s->d > 0 && stripe == 0) {
    /* perform the first resolution reduction */
    resolution_reduction(s, plane, s->d);
  }
  /* In case HITOLO is not used, we have to encode and store the higher
   * resolution layers first, although we do not need them right now. */
  while (lfcl - 1 > layer) {
    for (u = 0; u < s->stripes; u++)
      encode_sde(s, u, lfcl - 1, plane);
    --lfcl;
    s->highres[plane] ^= 1;
    if (lfcl > 1)
      resolution_reduction(s, plane, lfcl - 1);
  }
  
  encode_sde(s, stripe, layer, plane);

#ifdef DEBUG
  fprintf(stderr, "writing SDE: s/d/p = %2lu/%2d/%2d\n", stripe, layer, plane);
#endif
  jbg_buf_output(&s->sde[stripe][layer][plane], s->data_out, s->file);
  s->sde[stripe][layer][plane] = SDE_DONE;
  
  if (stripe == s->stripes - 1 && layer > 0 &&
      s->sde[0][layer-1][plane] == SDE_TODO) {
    s->highres[plane] ^= 1;
    if (layer > 1)
      resolution_reduction(s, plane, layer - 1);
  }
  
  return;
}


/*
 * Convert the table which controls the deterministic prediction
 * process from the internal format into the representation required
 * for the 1728 byte long DPTABLE element of a BIH.
 *
 * The bit order of the DPTABLE format (see also ITU-T T.82 figure 13) is
 *
 * high res:   4  5  6     low res:  0  1
 *             7  8  9               2  3
 *            10 11 12
 *
 * were 4 table entries are packed into one byte, while we here use
 * internally an unpacked 6912 byte long table indexed by the following
 * bit order:
 *
 * high res:   7  6  5     high res:   8  7  6     low res:  1  0
 * (phase 0)   4  .  .     (phase 1)   5  4  .               3  2
 *             .  .  .                 .  .  .
 *
 * high res:  10  9  8     high res:  11 10  9
 * (phase 2)   7  6  5     (phase 3)   8  7  6
 *             4  .  .                 5  4  .
 */
void jbg_int2dppriv(unsigned char *dptable, const char *internal)
{
  int i, j, k;
  int trans0[ 8] = { 1, 0, 3, 2, 7, 6, 5, 4 };
  int trans1[ 9] = { 1, 0, 3, 2, 8, 7, 6, 5, 4 };
  int trans2[11] = { 1, 0, 3, 2, 10, 9, 8, 7, 6, 5, 4 };
  int trans3[12] = { 1, 0, 3, 2, 11, 10, 9, 8, 7, 6, 5, 4 };
  
  for (i = 0; i < 1728; dptable[i++] = 0) ;

#define FILL_TABLE1(offset, len, trans) \
  for (i = 0; i < len; i++) { \
    k = 0; \
    for (j = 0; i >> j; j++) \
      k |= ((i >> j) & 1) << trans[j]; \
    dptable[(i + offset) >> 2] |= \
      (internal[k + offset] & 3) << ((3 - (i&3)) << 1); \
  }

  FILL_TABLE1(   0,  256, trans0);
  FILL_TABLE1( 256,  512, trans1);
  FILL_TABLE1( 768, 2048, trans2);
  FILL_TABLE1(2816, 4096, trans3);

  return;
}


/*
 * Convert the table which controls the deterministic prediction
 * process from the 1728 byte long DPTABLE format into the 6912 byte long
 * internal format.
 */
void jbg_dppriv2int(char *internal, const unsigned char *dptable)
{
  int i, j, k;
  int trans0[ 8] = { 1, 0, 3, 2, 7, 6, 5, 4 };
  int trans1[ 9] = { 1, 0, 3, 2, 8, 7, 6, 5, 4 };
  int trans2[11] = { 1, 0, 3, 2, 10, 9, 8, 7, 6, 5, 4 };
  int trans3[12] = { 1, 0, 3, 2, 11, 10, 9, 8, 7, 6, 5, 4 };
  
#define FILL_TABLE2(offset, len, trans) \
  for (i = 0; i < len; i++) { \
    k = 0; \
    for (j = 0; i >> j; j++) \
      k |= ((i >> j) & 1) << trans[j]; \
    internal[k + offset] = \
      (dptable[(i + offset) >> 2] >> ((3 - (i & 3)) << 1)) & 3; \
  }

  FILL_TABLE2(   0,  256, trans0);
  FILL_TABLE2( 256,  512, trans1);
  FILL_TABLE2( 768, 2048, trans2);
  FILL_TABLE2(2816, 4096, trans3);

  return;
}


/*
 * Encode one full BIE and pass the generated data to the specified
 * call-back function
 */
void jbg_enc_out(struct jbg_enc_state *s)
{
  unsigned long bpl;
  unsigned char buf[20];
  unsigned long xd, yd, y;
  long ii[3], is[3], ie[3];    /* generic variables for the 3 nested loops */ 
  unsigned long stripe;
  int layer, plane;
  int order;
  unsigned char dpbuf[1728];

  /* some sanity checks */
  s->order &= JBG_HITOLO | JBG_SEQ | JBG_ILEAVE | JBG_SMID;
  order = s->order & (JBG_SEQ | JBG_ILEAVE | JBG_SMID);
  if (iindex[order][0] < 0)
    s->order = order = JBG_SMID | JBG_ILEAVE;
  if (s->options & JBG_DPON && s->dppriv != jbg_dptable)
    s->options |= JBG_DPPRIV;
  if (s->mx > MX_MAX)
    s->mx = MX_MAX;
  s->my = 0;
  if (s->mx && s->mx < ((s->options & JBG_LRLTWO) ? 5U : 3U))
    s->mx = 0;
  if (s->d > 255 || s->d < 0 || s->dh > s->d || s->dh < 0 ||
      s->dl < 0 || s->dl > s->dh || s->planes < 0 || s->planes > 255)
    return;
  /* prevent uint32 overflow: s->l0 * 2 ^ s->d < 2 ^ 32 */
  if (s->d > 31 || (s->d != 0 && s->l0 >= (1UL << (32 - s->d))))
    return;
  if (s->yd1 < s->yd)
    s->yd1 = s->yd;
  if (s->yd1 > s->yd)
    s->options |= JBG_VLENGTH;

  /* ensure correct zero padding of bitmap at the final byte of each line */
  if (s->xd & 7) {
    bpl = jbg_ceil_half(s->xd, 3);     /* bytes per line */
    for (plane = 0; plane < s->planes; plane++)
      for (y = 0; y < s->yd; y++)
	s->lhp[0][plane][y * bpl + bpl - 1] &= ~((1 << (8 - (s->xd & 7))) - 1);
  }

  /* prepare BIH */
  buf[0] = s->dl;
  buf[1] = s->dh;
  buf[2] = s->planes;
  buf[3] = 0;
  xd = jbg_ceil_half(s->xd, s->d - s->dh);
  yd = jbg_ceil_half(s->yd1, s->d - s->dh);
  buf[4] = xd >> 24;
  buf[5] = (xd >> 16) & 0xff;
  buf[6] = (xd >> 8) & 0xff;
  buf[7] = xd & 0xff;
  buf[8] = yd >> 24;
  buf[9] = (yd >> 16) & 0xff;
  buf[10] = (yd >> 8) & 0xff;
  buf[11] = yd & 0xff;
  buf[12] = s->l0 >> 24;
  buf[13] = (s->l0 >> 16) & 0xff;
  buf[14] = (s->l0 >> 8) & 0xff;
  buf[15] = s->l0 & 0xff;
  buf[16] = s->mx;
  buf[17] = s->my;
  buf[18] = s->order;
  buf[19] = s->options & 0x7f;

#if 0
  /* sanitize L0 (if it was set to 0xffffffff for T.85-style NEWLEN tests) */
  if (s->l0 > (s->yd >> s->d))
    s->l0 = s->yd >> s->d;
#endif

  /* calculate number of stripes that will be required */
  s->stripes = jbg_stripes(s->l0, s->yd, s->d);

  /* allocate buffers for SDE pointers */
  if (s->sde == NULL) {
    s->sde = (struct jbg_buf ****)
      checked_malloc(s->stripes, sizeof(struct jbg_buf ***));
    for (stripe = 0; stripe < s->stripes; stripe++) {
      s->sde[stripe] = (struct jbg_buf ***)
	checked_malloc(s->d + 1, sizeof(struct jbg_buf **));
      for (layer = 0; layer < s->d + 1; layer++) {
	s->sde[stripe][layer] = (struct jbg_buf **)
	  checked_malloc(s->planes, sizeof(struct jbg_buf *));
	for (plane = 0; plane < s->planes; plane++)
	  s->sde[stripe][layer][plane] = SDE_TODO;
      }
    }
  }

  /* output BIH */
  s->data_out(buf, 20, s->file);
  if ((s->options & (JBG_DPON | JBG_DPPRIV | JBG_DPLAST)) ==
      (JBG_DPON | JBG_DPPRIV)) {
    /* write private table */
    jbg_int2dppriv(dpbuf, s->dppriv);
    s->data_out(dpbuf, 1728, s->file);
  }

#if 0
  /*
   * Encode everything first. This is a simple-minded alternative to
   * all the tricky on-demand encoding logic in output_sde() for
   * debugging purposes.
   */
  for (layer = s->dh; layer >= s->dl; layer--) {
    for (plane = 0; plane < s->planes; plane++) {
      if (layer > 0)
	resolution_reduction(s, plane, layer);
      for (stripe = 0; stripe < s->stripes; stripe++)
	encode_sde(s, stripe, layer, plane);
      s->highres[plane] ^= 1;
    }
  }
#endif

  /*
   * Generic loops over all SDEs. Which loop represents layer, plane and
   * stripe depends on the option flags.
   */

  /* start and end value for each loop */
  is[iindex[order][STRIPE]] = 0;
  ie[iindex[order][STRIPE]] = s->stripes - 1;
  is[iindex[order][LAYER]] = s->dl;
  ie[iindex[order][LAYER]] = s->dh;
  is[iindex[order][PLANE]] = 0;
  ie[iindex[order][PLANE]] = s->planes - 1;

  for (ii[0] = is[0]; ii[0] <= ie[0]; ii[0]++)
    for (ii[1] = is[1]; ii[1] <= ie[1]; ii[1]++)
      for (ii[2] = is[2]; ii[2] <= ie[2]; ii[2]++) {
	
	stripe = ii[iindex[order][STRIPE]];
	if (s->order & JBG_HITOLO)
	  layer = s->dh - (ii[iindex[order][LAYER]] - s->dl);
	else
	  layer = ii[iindex[order][LAYER]];
	plane = ii[iindex[order][PLANE]];

	/* output comment marker segment if there is any pending */
	if (s->comment) {
	  buf[0] = MARKER_ESC;
	  buf[1] = MARKER_COMMENT;
	  buf[2] = s->comment_len >> 24;
	  buf[3] = (s->comment_len >> 16) & 0xff;
	  buf[4] = (s->comment_len >> 8) & 0xff;
	  buf[5] = s->comment_len & 0xff;
	  s->data_out(buf, 6, s->file);
	  s->data_out(s->comment, s->comment_len, s->file);
	  s->comment = NULL;
	}

	output_sde(s, stripe, layer, plane);

	/*
	 * When we generate a NEWLEN test case (s->yd1 > s->yd), output
	 * NEWLEN after last stripe if we have only a single
	 * resolution layer or plane (see ITU-T T.85 profile), otherwise
	 * output NEWLEN before last stripe.
	 */
	if (s->yd1 > s->yd &&
	    (stripe == s->stripes - 1 ||
	     (stripe == s->stripes - 2 && 
	      (s->dl != s->dh || s->planes > 1)))) {
	  s->yd1 = s->yd;
	  yd = jbg_ceil_half(s->yd, s->d - s->dh);
	  buf[0] = MARKER_ESC;
	  buf[1] = MARKER_NEWLEN;
	  buf[2] = yd >> 24;
	  buf[3] = (yd >> 16) & 0xff;
	  buf[4] = (yd >> 8) & 0xff;
	  buf[5] = yd & 0xff;
	  s->data_out(buf, 6, s->file);
#ifdef DEBUG
	  fprintf(stderr, "NEWLEN: yd=%lu\n", yd);
#endif
	  if (stripe == s->stripes - 1) {
	    buf[1] = MARKER_SDNORM;
	    s->data_out(buf, 2, s->file);
	  }
	}

      }

  return;
}


void jbg_enc_free(struct jbg_enc_state *s)
{
  unsigned long stripe;
  int layer, plane;

#ifdef DEBUG
  fprintf(stderr, "jbg_enc_free(%p)\n", (void *) s);
#endif

  /* clear buffers for SDEs */
  if (s->sde) {
    for (stripe = 0; stripe < s->stripes; stripe++) {
      for (layer = 0; layer < s->d + 1; layer++) {
	for (plane = 0; plane < s->planes; plane++)
	  if (s->sde[stripe][layer][plane] != SDE_DONE &&
	      s->sde[stripe][layer][plane] != SDE_TODO)
	    jbg_buf_free(&s->sde[stripe][layer][plane]);
	checked_free(s->sde[stripe][layer]);
      }
      checked_free(s->sde[stripe]);
    }
    checked_free(s->sde);
  }

  /* clear free_list */
  jbg_buf_free(&s->free_list);

  /* clear memory for arithmetic encoder states */
  checked_free(s->s);

  /* clear memory for differential-layer typical prediction buffer */
  checked_free(s->tp);

  /* clear memory for adaptive template pixel offsets */
  checked_free(s->tx);

  /* clear lowres image buffers */
  if (s->lhp[1]) {
    for (plane = 0; plane < s->planes; plane++)
      checked_free(s->lhp[1][plane]);
    checked_free(s->lhp[1]);
  }
  
  /* clear buffer for index of highres image in lhp */
  checked_free(s->highres);
  
  return;
}


/*
 * Convert the error codes used by jbg_dec_in() into an English ASCII string
 */
const char *jbg_strerror(int errnum)
{
  errnum >>= 4;
  if (errnum < 0 || (unsigned) errnum >= sizeof(errmsg)/sizeof(errmsg[0]))
    return "Unknown error code passed to jbg_strerror()";

  return errmsg[errnum];
}


/*
 * The constructor for a decoder 
 */
void jbg_dec_init(struct jbg_dec_state *s)
{
  s->order = 0;
  s->d = -1;
  s->bie_len = 0;
  s->buf_len = 0;
  s->dppriv = NULL;
  s->xmax = 4294967295UL;
  s->ymax = 4294967295UL;
  s->dmax = 256;
  s->s = NULL;

  return;
}


/*
 * Specify a maximum image size for the decoder. If the JBIG file has
 * the order bit ILEAVE, but not the bit SEQ set, then the decoder
 * will abort to decode after the image has reached the maximal
 * resolution layer which is still not wider than xmax or higher than
 * ymax.
 */
void jbg_dec_maxsize(struct jbg_dec_state *s, unsigned long xmax,
		     unsigned long ymax)
{
  if (xmax > 0) s->xmax = xmax;
  if (ymax > 0) s->ymax = ymax;

  return;
}


/*
 * Decode the new len PSDC bytes to which data points and add them to
 * the current stripe. Return the number of bytes which have actually
 * been read (this will be less than len if a marker segment was 
 * part of the data or if the final byte was 0xff, in which case
 * this code cannot determine whether we have a marker segment).
 */
static size_t decode_pscd(struct jbg_dec_state *s, unsigned char *data,
			  size_t len)
{
  unsigned long stripe;
  unsigned int layer, plane;
  unsigned long hl, ll, y, hx, hy, lx, ly, hbpl, lbpl;
  unsigned char *hp, *lp1, *lp2, *p1, *q1;
  register unsigned long line_h1, line_h2, line_h3;
  register unsigned long line_l1, line_l2, line_l3;
  struct jbg_ardec_state *se;
  unsigned long x;
  long o;
  unsigned a;
  int n;
  int pix, cx = 0, slntp, tx;

  /* SDE loop variables */
  stripe = s->ii[iindex[s->order & 7][STRIPE]];
  layer = s->ii[iindex[s->order & 7][LAYER]];
  plane = s->ii[iindex[s->order & 7][PLANE]];

  /* forward data to arithmetic decoder */
  se = s->s[plane] + layer - s->dl;
  se->pscd_ptr = data;
  se->pscd_end = data + len;
  
  /* number of lines per stripe in highres image */
  hl = s->l0 << layer;
  /* number of lines per stripe in lowres image */
  ll = hl >> 1;
  /* current line number in highres image */
  y = stripe * hl + s->i;
  /* number of pixels in highres image */
  hx = jbg_ceil_half(s->xd, s->d - layer);
  hy = jbg_ceil_half(s->yd, s->d - layer);
  /* number of pixels in lowres image */
  lx = jbg_ceil_half(hx, 1);
  ly = jbg_ceil_half(hy, 1);
  /* bytes per line in highres and lowres image */
  hbpl = jbg_ceil_half(hx, 3);
  lbpl = jbg_ceil_half(lx, 3);
  /* pointer to highres and lowres image bytes */
  hp  = s->lhp[ layer    & 1][plane] + (stripe * hl + s->i) * hbpl +
    (s->x >> 3);
  lp2 = s->lhp[(layer-1) & 1][plane] + (stripe * ll + (s->i >> 1)) * lbpl +
    (s->x >> 4);
  lp1 = lp2 + lbpl;

  /* restore a few local variables */
  line_h1 = s->line_h1;
  line_h2 = s->line_h2;
  line_h3 = s->line_h3;
  line_l1 = s->line_l1;
  line_l2 = s->line_l2;
  line_l3 = s->line_l3;
  x = s->x;

#ifdef DEBUG
  if (s->x == 0 && s->i == 0 && s->pseudo)
    fprintf(stderr, "decode_pscd(%p, %p, %ld): s/d/p = %2lu/%2u/%2u\n",
	    (void *) s, (void *) data, (long) len, stripe, layer, plane);
#endif

  if (s->x == 0 && s->i == 0 &&
      (stripe == 0 || s->reset[plane][layer - s->dl]) && s->pseudo) {
    s->tx[plane][layer - s->dl] = s->ty[plane][layer - s->dl] = 0;
    s->lntp[plane][layer - s->dl] = 1;
  }

  if (layer == 0) {

    /*
     *  Decode lowest resolution layer
     */

    for (; s->i < hl && y < hy; s->i++, y++) {

      /* adaptive template changes */
      if (x == 0 && s->pseudo)
	for (n = 0; n < s->at_moves; n++)
	  if (s->at_line[n] == s->i) {
	    s->tx[plane][layer - s->dl] = s->at_tx[n];
	    s->ty[plane][layer - s->dl] = s->at_ty[n];
#ifdef DEBUG
	    fprintf(stderr, "ATMOVE: line=%lu, tx=%d, ty=%d.\n", s->i,
		    s->tx[plane][layer - s->dl], s->ty[plane][layer - s->dl]);
#endif
	  }
      tx = s->tx[plane][layer - s->dl];
      assert(tx >= 0); /* i.e., tx can safely be cast to unsigned */

      /* typical prediction */
      if (s->options & JBG_TPBON && s->pseudo) {
	slntp = arith_decode(se, (s->options & JBG_LRLTWO) ? TPB2CX : TPB3CX);
	if (slntp < 0)
	  goto leave;
	s->lntp[plane][layer - s->dl] =
	  !(slntp ^ s->lntp[plane][layer - s->dl]);
	if (!s->lntp[plane][layer - s->dl]) {
	  /* this line is 'typical' (i.e. identical to the previous one) */
	  p1 = hp;
	  if (s->i == 0 && (stripe == 0 || s->reset[plane][layer - s->dl]))
	    while (p1 < hp + hbpl) *p1++ = 0;
	  else {
	    q1 = hp - hbpl;
	    while (q1 < hp) *p1++ = *q1++;
	  }
	  hp += hbpl;
	  continue;
	}
	/* this line is 'not typical' and has to be coded completely */
      }
      s->pseudo = 0;
      
      /*
       * Layout of the variables line_h1, line_h2, line_h3, which contain
       * as bits the neighbour pixels of the currently decoded pixel X:
       *
       *                     76543210 76543210 76543210 76543210     line_h3
       *                     76543210 76543210 76543210 76543210     line_h2
       *   76543210 76543210 76543210 76543210 X                     line_h1
       */
      
      if (x == 0) {
	line_h1 = line_h2 = line_h3 = 0;
	if (s->i > 0 || (y > 0 && !s->reset[plane][layer - s->dl]))
	  line_h2 = (long)*(hp - hbpl) << 8;
	if (s->i > 1 || (y > 1 && !s->reset[plane][layer - s->dl]))
	  line_h3 = (long)*(hp - hbpl - hbpl) << 8;
      }
      
      /*
       * Another tiny JBIG standard bug:
       *
       * While implementing the line_h3 handling here, I discovered
       * another problem with the ITU-T T.82(1993 E) specification.
       * This might be a somewhat pathological case, however. The
       * standard is unclear about how a decoder should behave in the
       * following situation:
       *
       * Assume we are in layer 0 and all stripes are single lines
       * (L0=1 allowed by table 9). We are now decoding the first (and
       * only) line of the third stripe. Assume, the first stripe was
       * terminated by SDRST and the second stripe was terminated by
       * SDNORM. While decoding the only line of the third stripe with
       * the three-line template, we need access to pixels from the
       * previous two stripes. We know that the previous stripe
       * terminated with SDNROM, so we access the pixel from the
       * second stripe. But do we have to replace the pixels from the
       * first stripe by background pixels, because this stripe ended
       * with SDRST? The standard, especially clause 6.2.5 does never
       * mention this case, so the behaviour is undefined here. My
       * current implementation remembers only the marker used to
       * terminate the previous stripe. In the above example, the
       * pixels of the first stripe are accessed despite the fact that
       * this stripe ended with SDRST. An alternative (only slightly
       * more complicated) implementation would be to remember the end
       * marker (SDNORM or SDRST) of the previous two stripes in a
       * plane/layer and to act accordingly when accessing the two
       * previous lines. What am I supposed to do here?
       *
       * As the standard is unclear about the correct behaviour in the
       * situation of the above example, I strongly suggest to avoid
       * the following situation while encoding data with JBIG:
       *
       *   LRLTWO = 0, L0=1 and both SDNORM and SDRST appear in layer 0.
       *
       * I guess that only a very few if any encoders will switch
       * between SDNORM and SDRST, so let us hope that this ambiguity
       * in the standard will never cause any interoperability
       * problems.
       *
       * Markus Kuhn -- 1995-04-30
       */

      /* decode line */
      while (x < hx) {
	if ((x & 7) == 0) {
	  if (x < hbpl * 8 - 8 &&
	      (s->i > 0 || (y > 0 && !s->reset[plane][layer - s->dl]))) {
	    line_h2 |= *(hp - hbpl + 1);
	    if (s->i > 1 || (y > 1 && !s->reset[plane][layer - s->dl]))
	      line_h3 |= *(hp - hbpl - hbpl + 1);
	  }
	}
	if (s->options & JBG_LRLTWO) {
	  /* two line template */
	  do {
	    if (tx) {
	      if ((unsigned) tx > x)
		a = 0;
	      else if (tx < 8)
		a = ((line_h1 >> (tx - 5)) & 0x010);
	      else {
		o = (x - tx) - (x & ~7L);
		a = (hp[o >> 3] >> (7 - (o & 7))) & 1;
		a <<= 4;
	      }
	      assert(tx > 31 ||
		     a == ((line_h1 >> (tx - 5)) & 0x010));
	      pix = arith_decode(se, (((line_h2 >> 9) & 0x3e0) | a |
				      (line_h1 & 0x00f)));
	    } else
	      pix = arith_decode(se, (((line_h2 >> 9) & 0x3f0) |
				      (line_h1 & 0x00f)));
	    if (pix < 0)
	      goto leave;
	    line_h1 = (line_h1 << 1) | pix;
	    line_h2 <<= 1;
	  } while ((++x & 7) && x < hx);
	} else {
	  /* three line template */
	  do {
	    if (tx) {
	      if ((unsigned) tx > x)
		a = 0;
	      else if (tx < 8)
		a = ((line_h1 >> (tx - 3)) & 0x004);
	      else {
		o = (x - tx) - (x & ~7L);
		a = (hp[o >> 3] >> (7 - (o & 7))) & 1;
		a <<= 2;
	      }
	      assert(tx > 31 ||
		     a == ((line_h1 >> (tx - 3)) & 0x004));
	      pix = arith_decode(se, (((line_h3 >>  7) & 0x380) |
				      ((line_h2 >> 11) & 0x078) | a |
				      (line_h1 & 0x003)));
	    } else
	      pix = arith_decode(se, (((line_h3 >>  7) & 0x380) |
				      ((line_h2 >> 11) & 0x07c) |
				      (line_h1 & 0x003)));
	    if (pix < 0)
	      goto leave;
	    
	    line_h1 = (line_h1 << 1) | pix;
	    line_h2 <<= 1;
	    line_h3 <<= 1;
	  } while ((++x & 7) && x < hx);
	} /* if (s->options & JBG_LRLTWO) */
	*hp++ = line_h1;
      } /* while */
      *(hp - 1) <<= hbpl * 8 - hx;
      x = 0;
      s->pseudo = 1;
    } /* for (i = ...) */
    
  } else {

    /*
     *  Decode differential layer
     */

    for (; s->i < hl && y < hy; s->i++, y++) {

      /* adaptive template changes */
      if (x == 0)
	for (n = 0; n < s->at_moves; n++)
	  if (s->at_line[n] == s->i) {
	    s->tx[plane][layer - s->dl] = s->at_tx[n];
	    s->ty[plane][layer - s->dl] = s->at_ty[n];
#ifdef DEBUG
	    fprintf(stderr, "ATMOVE: line=%lu, tx=%d, ty=%d.\n", s->i,
		    s->tx[plane][layer - s->dl], s->ty[plane][layer - s->dl]);
#endif
	  }
      tx = s->tx[plane][layer - s->dl];

      /* handle lower border of low-resolution image */
      if ((s->i >> 1) >= ll - 1 || (y >> 1) >= ly - 1)
	lp1 = lp2;

      /* typical prediction */
      if ((s->options & JBG_TPDON) && s->pseudo) {
	if ((s->lntp[plane][layer - s->dl] = arith_decode(se, TPDCX)) < 0)
	  goto leave;
      }
      s->pseudo = 0;

      /*
       * Layout of the variables line_h1, line_h2, line_h3, which contain
       * as bits the high resolution neighbour pixels of the currently
       * decoded highres pixel X:
       *
       *                     76543210 76543210 76543210 76543210     line_h3
       *                     76543210 76543210 76543210 76543210     line_h2
       *   76543210 76543210 76543210 76543210 X                     line_h1
       *
       * Layout of the variables line_l1, line_l2, line_l3, which contain
       * the low resolution pixels near the currently decoded pixel as bits.
       * The lowres pixel in which the currently coded highres pixel is
       * located is marked as Y:
       *
       *                     76543210 76543210 76543210 76543210     line_l3
       *                     76543210 76543210 Y6543210 76543210     line_l2
       *                     76543210 76543210 76543210 76543210     line_l1
       */
      

      if (x == 0) {
	line_h1 = line_h2 = line_h3 = line_l1 = line_l2 = line_l3 = 0;
	if (s->i > 0 || (y > 0 && !s->reset[plane][layer - s->dl])) {
	  line_h2 = (long)*(hp - hbpl) << 8;
	  if (s->i > 1 || (y > 1 && !s->reset[plane][layer - s->dl]))
	    line_h3 = (long)*(hp - hbpl - hbpl) << 8;
	}
	if (s->i > 1 || (y > 1 && !s->reset[plane][layer-s->dl]))
	  line_l3 = (long)*(lp2 - lbpl) << 8;
	line_l2 = (long)*lp2 << 8;
	line_l1 = (long)*lp1 << 8;
      }
      
      /* decode line */
      while (x < hx) {
	if ((x & 15) == 0)
	  if ((x >> 1) < lbpl * 8 - 8) {
	    line_l1 |= *(lp1 + 1);
	    line_l2 |= *(lp2 + 1);
	    if (s->i > 1 || 
		(y > 1 && !s->reset[plane][layer - s->dl]))
	      line_l3 |= *(lp2 - lbpl + 1);
	  }
	do {

	  assert(hp  - (s->lhp[ layer     &1][plane] + (stripe * hl + s->i)
			* hbpl) == (ptrdiff_t) x >> 3);
	  assert(lp2 - (s->lhp[(layer-1) &1][plane] + (stripe * ll + (s->i>>1))
			* lbpl) == (ptrdiff_t) x >> 4);

	  if ((x & 7) == 0)
	    if (x < hbpl * 8 - 8) {
	      if (s->i > 0 || (y > 0 && !s->reset[plane][layer - s->dl])) {
		line_h2 |= *(hp + 1 - hbpl);
		if (s->i > 1 || (y > 1 && !s->reset[plane][layer - s->dl]))
		  line_h3 |= *(hp + 1 - hbpl - hbpl);
	      }
	    }
	  do {
	    if (!s->lntp[plane][layer - s->dl])
              cx = (((line_l3 >> 14) & 0x007) |
                    ((line_l2 >> 11) & 0x038) |
                    ((line_l1 >> 8)  & 0x1c0));
	    if (!s->lntp[plane][layer - s->dl] &&
		(cx == 0x000 || cx == 0x1ff)) {
	      /* pixels are typical and have not to be decoded */
	      do {
		line_h1 = (line_h1 << 1) | (cx & 1);
	      } while ((++x & 1) && x < hx);
	      line_h2 <<= 2;  line_h3 <<= 2;
	    } else 
	      do {
		
		/* deterministic prediction */
		if (s->options & JBG_DPON)
		  if ((y & 1) == 0)
		    if ((x & 1) == 0) 
		      /* phase 0 */
		      pix = s->dppriv[((line_l3 >> 15) & 0x003) |
				      ((line_l2 >> 13) & 0x00c) |
				      ((line_h1 <<  4) & 0x010) |
				      ((line_h2 >>  9) & 0x0e0)];
		    else
		      /* phase 1 */
		      pix = s->dppriv[(((line_l3 >> 15) & 0x003) |
				       ((line_l2 >> 13) & 0x00c) |
				       ((line_h1 <<  4) & 0x030) |
				       ((line_h2 >>  9) & 0x1c0)) + 256];
		  else
		    if ((x & 1) == 0)
		      /* phase 2 */
		      pix = s->dppriv[(((line_l3 >> 15) & 0x003) |
				       ((line_l2 >> 13) & 0x00c) |
				       ((line_h1 <<  4) & 0x010) |
				       ((line_h2 >>  9) & 0x0e0) |
				       ((line_h3 >>  6) & 0x700)) + 768];
		    else
		      /* phase 3 */
		      pix = s->dppriv[(((line_l3 >> 15) & 0x003) |
				       ((line_l2 >> 13) & 0x00c) |
				       ((line_h1 <<  4) & 0x030) |
				       ((line_h2 >>  9) & 0x1c0) |
				       ((line_h3 >>  6) & 0xe00)) + 2816];
		else
		  pix = 2;

		if (pix & 2) {
		  if (tx)
		    cx = ((line_h1         & 0x003) |
			  (((line_h1 << 2) >> (tx - 3)) & 0x010) |
			  ((line_h2 >> 12) & 0x00c) |
			  ((line_h3 >> 10) & 0x020));
		  else
		    cx = ((line_h1         & 0x003) |
			  ((line_h2 >> 12) & 0x01c) |
			  ((line_h3 >> 10) & 0x020));
		  if (x & 1)
		    cx |= (((line_l2 >> 8) & 0x0c0) |
			   ((line_l1 >> 6) & 0x300)) | (1UL << 10);
		  else
		    cx |= (((line_l2 >> 9) & 0x0c0) |
			   ((line_l1 >> 7) & 0x300));
		  cx |= (y & 1) << 11;

		  pix = arith_decode(se, cx);
		  if (pix < 0)
		    goto leave;
		}

		line_h1 = (line_h1 << 1) | pix;
		line_h2 <<= 1;
		line_h3 <<= 1;
		
	      } while ((++x & 1) && x < hx);
	    line_l1 <<= 1; line_l2 <<= 1;  line_l3 <<= 1;
	  } while ((x & 7) && x < hx);
	  *hp++ = line_h1;
	} while ((x & 15) && x < hx);
	++lp1;
	++lp2;
      } /* while */
      x = 0;
      
      *(hp - 1) <<= hbpl * 8 - hx;
      if ((s->i & 1) == 0) {
	/* low resolution pixels are used twice */
	lp1 -= lbpl;
	lp2 -= lbpl;
      } else
	s->pseudo = 1;
      
    } /* for (i = ...) */
    
  }

 leave:

  /* save a few local variables */
  s->line_h1 = line_h1;
  s->line_h2 = line_h2;
  s->line_h3 = line_h3;
  s->line_l1 = line_l1;
  s->line_l2 = line_l2;
  s->line_l3 = line_l3;
  s->x = x;

  return se->pscd_ptr - data;
}


/*
 * Provide to the decoder a new BIE fragment of len bytes starting at data.
 *
 * Unless cnt is NULL, *cnt will contain the number of actually read bytes
 * on return.
 *
 * Normal return values:
 *
 *   JBG_EAGAIN      All data bytes provided so far have been processed
 *                   (*cnt == len) but the end of the data stream has
 *                   not yet been recognized. Call the function again
 *                   with additional BIE bytes.
 *   JBG_EOK         The function has reached the end of a and
 *                   a full image has been decoded. The function can
 *                   be called again with data from the next BIE, if
 *                   there exists one, in order to get to a higher
 *                   resolution layer. The remaining len - *cnt bytes
 *                   of the previous data block will then have to passed
 *                   to this function again if len > *cnt.
 *   JBG_EOK_INTR    Parsing the BIE has been interrupted as had been
 *                   requested by a jbg_dec_maxsize() specification.
 *                   This function can be called again with the
 *                   rest of the BIE to continue the decoding process.
 *                   The remaining len - *cnt bytes of the previous
 *                   data block will then have to be passed to this
 *                   function again if len > *cnt.
 *
 * Any other return value indicates that the decoding process was
 * aborted by a serious problem and the only function you can then
 * still call is jbg_dec_free() in order to remove the mess, and
 * jbg85_strerror() to find out what to tell the user. (Looking at the
 * least significant bits of the return value will provide additional
 * information by identifying which test exactly has failed.)
 */
int jbg_dec_in(struct jbg_dec_state *s, unsigned char *data, size_t len,
	       size_t *cnt)
{
  int i, j, required_length;
  unsigned long x, y;
  unsigned long is[3], ie[3];
  size_t dummy_cnt;
  unsigned char *dppriv;

  if (!cnt) cnt = &dummy_cnt;
  *cnt = 0;
  if (len < 1) return JBG_EAGAIN;

  /* read in 20-byte BIH */
  if (s->bie_len < 20) {
    while (s->bie_len < 20 && *cnt < len)
      s->buffer[s->bie_len++] = data[(*cnt)++];
    if (s->bie_len < 20) 
      return JBG_EAGAIN;
    /* test whether this looks like a valid JBIG header at all */
    if (s->buffer[1] < s->buffer[0])
      return JBG_EINVAL | 1;
    if (s->buffer[3] != 0)           return JBG_EINVAL | 2; /* padding != 0 */
    if ((s->buffer[18] & 0xf0) != 0) return JBG_EINVAL | 3; /* padding != 0 */
    if ((s->buffer[19] & 0x80) != 0) return JBG_EINVAL | 4; /* padding != 0 */
    if (s->buffer[0] != s->d + 1)
      return JBG_ENOCONT | 1;
    s->dl = s->buffer[0];
    s->d = s->buffer[1];
    if (s->dl == 0)
      s->planes = s->buffer[2];
    else
      if (s->planes != s->buffer[2])
	return JBG_ENOCONT | 2;
    x = (((long) s->buffer[ 4] << 24) | ((long) s->buffer[ 5] << 16) |
	 ((long) s->buffer[ 6] <<  8) | (long) s->buffer[ 7]);
    y = (((long) s->buffer[ 8] << 24) | ((long) s->buffer[ 9] << 16) |
	 ((long) s->buffer[10] <<  8) | (long) s->buffer[11]);
    if (s->dl != 0 && ((s->xd << (s->d - s->dl + 1)) != x &&
		       (s->yd << (s->d - s->dl + 1)) != y))
      return JBG_ENOCONT | 3;
    s->xd = x;
    s->yd = y;
    s->l0 = (((long) s->buffer[12] << 24) | ((long) s->buffer[13] << 16) |
	     ((long) s->buffer[14] <<  8) | (long) s->buffer[15]);
    /* ITU-T T.85 trick not directly supported by decoder; for full
     * T.85 compatibility with respect to all NEWLEN marker scenarios,
     * preprocess BIE with jbg_newlen() before passing it to the decoder,
     * or consider using the decoder found in jbig85.c instead. */
    if (s->yd == 0xffffffff)
      return JBG_EIMPL | 1;
    if (!s->planes) return JBG_EINVAL | 5;
    if (!s->xd)     return JBG_EINVAL | 6;
    if (!s->yd)     return JBG_EINVAL | 7;
    if (!s->l0)     return JBG_EINVAL | 8;
    /* prevent uint32 overflow: s->l0 * 2 ^ s->d < 2 ^ 32 */
    if (s->d > 31)
      return JBG_EIMPL | 2;
    if ((s->d != 0 && s->l0 >= (1UL << (32 - s->d))))
      return JBG_EIMPL | 3;
    s->mx = s->buffer[16];
    if (s->mx > 127)
      return JBG_EINVAL | 9;
    s->my = s->buffer[17];
#if 0
    if (s->my > 0)
      return JBG_EIMPL | 4;
#endif
    s->order = s->buffer[18];
    if (iindex[s->order & 7][0] < 0)
      return JBG_EINVAL | 10;
    /* HITOLO and SEQ currently not yet implemented */
    if (s->dl != s->d && (s->order & JBG_HITOLO || s->order & JBG_SEQ))
      return JBG_EIMPL | 5;
    s->options = s->buffer[19];

    /* calculate number of stripes that will be required */
    s->stripes = jbg_stripes(s->l0, s->yd, s->d);
    
    /* some initialization */
    s->ii[iindex[s->order & 7][STRIPE]] = 0;
    s->ii[iindex[s->order & 7][LAYER]] = s->dl;
    s->ii[iindex[s->order & 7][PLANE]] = 0;
    if (s->dl == 0) {
      s->s      = (struct jbg_ardec_state **)
	checked_malloc(s->planes, sizeof(struct jbg_ardec_state *));
      s->tx     = (int **) checked_malloc(s->planes, sizeof(int *));
      s->ty     = (int **) checked_malloc(s->planes, sizeof(int *));
      s->reset  = (int **) checked_malloc(s->planes, sizeof(int *));
      s->lntp   = (int **) checked_malloc(s->planes, sizeof(int *));
      s->lhp[0] = (unsigned char **)
	checked_malloc(s->planes, sizeof(unsigned char *));
      s->lhp[1] = (unsigned char **)
	checked_malloc(s->planes, sizeof(unsigned char *));
      for (i = 0; i < s->planes; i++) {
	s->s[i]     = (struct jbg_ardec_state *)
	  checked_malloc(s->d - s->dl + 1, sizeof(struct jbg_ardec_state));
	s->tx[i]    = (int *) checked_malloc(s->d - s->dl + 1, sizeof(int));
	s->ty[i]    = (int *) checked_malloc(s->d - s->dl + 1, sizeof(int));
	s->reset[i] = (int *) checked_malloc(s->d - s->dl + 1, sizeof(int));
	s->lntp[i]  = (int *) checked_malloc(s->d - s->dl + 1, sizeof(int));
	s->lhp[ s->d    & 1][i] = (unsigned char *)
	  checked_malloc(s->yd, jbg_ceil_half(s->xd, 3));
	s->lhp[(s->d-1) & 1][i] = (unsigned char *)
	  checked_malloc(jbg_ceil_half(s->yd, 1), jbg_ceil_half(s->xd, 1+3));
      }
    } else {
      for (i = 0; i < s->planes; i++) {
	s->s[i]     = (struct jbg_ardec_state *)
	  checked_realloc(s->s[i], s->d - s->dl + 1,
			  sizeof(struct jbg_ardec_state));
	s->tx[i]    = (int *) checked_realloc(s->tx[i],
					      s->d - s->dl + 1, sizeof(int));
	s->ty[i]    = (int *) checked_realloc(s->ty[i],
					      s->d - s->dl + 1, sizeof(int));
	s->reset[i] = (int *) checked_realloc(s->reset[i],
					      s->d - s->dl + 1, sizeof(int));
	s->lntp[i]  = (int *) checked_realloc(s->lntp[i],
					      s->d - s->dl + 1, sizeof(int));
	s->lhp[ s->d    & 1][i] = (unsigned char *)
	  checked_realloc(s->lhp[ s->d    & 1][i],
			  s->yd, jbg_ceil_half(s->xd, 3));
	s->lhp[(s->d-1) & 1][i] = (unsigned char *)
	  checked_realloc(s->lhp[(s->d-1) & 1][i],
			  jbg_ceil_half(s->yd, 1), jbg_ceil_half(s->xd, 1+3));
      }
    }
    for (i = 0; i < s->planes; i++)
      for (j = 0; j <= s->d - s->dl; j++)
	arith_decode_init(s->s[i] + j, 0);
    if (s->dl == 0 || (s->options & JBG_DPON && !(s->options & JBG_DPPRIV)))
      s->dppriv = jbg_dptable;
    s->comment_skip = 0;
    s->buf_len = 0;
    s->x = 0;
    s->i = 0;
    s->pseudo = 1;
    s->at_moves = 0;
  }

  /* read in DPTABLE */
  if (s->bie_len < 20 + 1728 && 
      (s->options & (JBG_DPON | JBG_DPPRIV | JBG_DPLAST)) ==
      (JBG_DPON | JBG_DPPRIV)) {
    assert(s->bie_len >= 20);
    if (!s->dppriv || s->dppriv == jbg_dptable)
      s->dppriv = (char *) checked_malloc(1728, sizeof(char));
    while (s->bie_len < 20 + 1728 && *cnt < len)
      s->dppriv[s->bie_len++ - 20] = data[(*cnt)++];
    if (s->bie_len < 20 + 1728) 
      return JBG_EAGAIN;
    dppriv = (unsigned char *) s->dppriv;
    s->dppriv = (char *) checked_malloc(6912, sizeof(char));
    jbg_dppriv2int(s->dppriv, dppriv);
    checked_free(dppriv);
  }

  /*
   * BID processing loop
   */
  
  while (*cnt < len) {

    /* process floating marker segments */

    /* skip COMMENT contents */
    if (s->comment_skip) {
      if (s->comment_skip <= len - *cnt) {
	*cnt += s->comment_skip;
	s->comment_skip = 0;
      } else {
	s->comment_skip -= len - *cnt;
	*cnt = len;
      }
      continue;
    }

    /* load complete marker segments into s->buffer for processing */
    if (s->buf_len > 0) {
      assert(s->buffer[0] == MARKER_ESC);
      while (s->buf_len < 2 && *cnt < len)
	s->buffer[s->buf_len++] = data[(*cnt)++];
      if (s->buf_len < 2) continue;
      switch (s->buffer[1]) {
      case MARKER_COMMENT: required_length = 6; break;
      case MARKER_ATMOVE:  required_length = 8; break;
      case MARKER_NEWLEN:  required_length = 6; break;
      case MARKER_ABORT:
      case MARKER_SDNORM:
      case MARKER_SDRST:   required_length = 2; break;
      case MARKER_STUFF:
	/* forward stuffed 0xff to arithmetic decoder */
	s->buf_len = 0;
	decode_pscd(s, s->buffer, 2);
	continue;
      default:
	return JBG_EMARKER;
      }
      while (s->buf_len < required_length && *cnt < len)
	s->buffer[s->buf_len++] = data[(*cnt)++];
      if (s->buf_len < required_length) continue;
      /* now the buffer is filled with exactly one marker segment */
      switch (s->buffer[1]) {
      case MARKER_COMMENT:
	s->comment_skip =
	  (((long) s->buffer[2] << 24) | ((long) s->buffer[3] << 16) |
	   ((long) s->buffer[4] <<  8) | (long) s->buffer[5]);
	break;
      case MARKER_ATMOVE:
	if (s->at_moves < JBG_ATMOVES_MAX) {
	  s->at_line[s->at_moves] =
	    (((long) s->buffer[2] << 24) | ((long) s->buffer[3] << 16) |
	     ((long) s->buffer[4] <<  8) | (long) s->buffer[5]);
	  s->at_tx[s->at_moves] = (signed char) s->buffer[6];
	  s->at_ty[s->at_moves] = s->buffer[7];
	  if (s->at_tx[s->at_moves] < - (int) s->mx ||
	      s->at_tx[s->at_moves] >   (int) s->mx ||
	      s->at_ty[s->at_moves] >   (int) s->my ||
	      (s->at_ty[s->at_moves] == 0 && s->at_tx[s->at_moves] < 0))
	    return JBG_EINVAL | 11;
	  if (s->at_ty[s->at_moves] != 0)
	    return JBG_EIMPL | 6;
	  s->at_moves++;
	} else
	  return JBG_EIMPL | 7; /* more than JBG_ATMOVES_MAX ATMOVES */
	break;
      case MARKER_NEWLEN:
	y = (((long) s->buffer[2] << 24) | ((long) s->buffer[3] << 16) |
	     ((long) s->buffer[4] <<  8) | (long) s->buffer[5]);
	if (y > s->yd)                   return JBG_EINVAL | 12;
	if (!(s->options & JBG_VLENGTH)) return JBG_EINVAL | 13;
	s->yd = y;
	/* calculate again number of stripes that will be required */
	s->stripes = jbg_stripes(s->l0, s->yd, s->d);
	break;
      case MARKER_ABORT:
	return JBG_EABORT;
	
      case MARKER_SDNORM:
      case MARKER_SDRST:
	/* decode final pixels based on trailing zero bytes */
	decode_pscd(s, s->buffer, 2);

	arith_decode_init(s->s[s->ii[iindex[s->order & 7][PLANE]]] + 
			  s->ii[iindex[s->order & 7][LAYER]] - s->dl,
			  s->ii[iindex[s->order & 7][STRIPE]] != s->stripes - 1
			  && s->buffer[1] != MARKER_SDRST);
	
	s->reset[s->ii[iindex[s->order & 7][PLANE]]]
	  [s->ii[iindex[s->order & 7][LAYER]] - s->dl] =
	    (s->buffer[1] == MARKER_SDRST);
	
	/* prepare for next SDE */
	s->x = 0;
	s->i = 0;
	s->pseudo = 1;
	s->at_moves = 0;
	
	/* increment layer/stripe/plane loop variables */
	/* start and end value for each loop: */
	is[iindex[s->order & 7][STRIPE]] = 0;
	ie[iindex[s->order & 7][STRIPE]] = s->stripes - 1;
	is[iindex[s->order & 7][LAYER]] = s->dl;
	ie[iindex[s->order & 7][LAYER]] = s->d;
	is[iindex[s->order & 7][PLANE]] = 0;
	ie[iindex[s->order & 7][PLANE]] = s->planes - 1;
	i = 2;  /* index to innermost loop */
	do {
	  j = 0;  /* carry flag */
	  if (++s->ii[i] > ie[i]) {
	    /* handling overflow of loop variable */
	    j = 1;
	    if (i > 0)
	      s->ii[i] = is[i];
	  }
	} while (--i >= 0 && j);

	s->buf_len = 0;
	
	/* check whether this have been all SDEs */
	if (j) {
#ifdef DEBUG
	  fprintf(stderr, "This was the final SDE in this BIE, "
		  "%ld bytes left.\n", (long) (len - *cnt));
#endif
	  s->bie_len = 0;
	  return JBG_EOK;
	}

	/* check whether we have to abort because of xmax/ymax */
	if (iindex[s->order & 7][LAYER] == 0 && i < 0) {
	  /* LAYER is the outermost loop and we have just gone to next layer */
	  if (jbg_ceil_half(s->xd, s->d - s->ii[0]) > s->xmax ||
	      jbg_ceil_half(s->yd, s->d - s->ii[0]) > s->ymax) {
	    s->xmax = 4294967295UL;
	    s->ymax = 4294967295UL;
	    return JBG_EOK_INTR;
	  }
	  if (s->ii[0] > (unsigned long) s->dmax) {
	    s->dmax = 256;
	    return JBG_EOK_INTR;
	  }
	}

	break;
      }
      s->buf_len = 0;

    } else if (data[*cnt] == MARKER_ESC)
      s->buffer[s->buf_len++] = data[(*cnt)++];

    else {

      /* we have found PSCD bytes */
      *cnt += decode_pscd(s, data + *cnt, len - *cnt);
      if (*cnt < len && data[*cnt] != 0xff) {
#ifdef DEBUG
	fprintf(stderr, "PSCD was longer than expected, unread bytes "
		"%02x %02x %02x %02x ...\n", data[*cnt], data[*cnt+1],
		data[*cnt+2], data[*cnt+3]);
#endif
	return JBG_EINVAL | 14;
      }
      
    }
  }  /* of BID processing loop 'while (*cnt < len) ...' */

  return JBG_EAGAIN;
}


/*
 * After jbg_dec_in() returned JBG_EOK or JBG_EOK_INTR, you can call this
 * function in order to find out the width of the image. Returns 0 if
 * there is no image available yet.
 */
unsigned long jbg_dec_getwidth(const struct jbg_dec_state *s)
{
  if (s->d < 0)
    return 0;
  if (iindex[s->order & 7][LAYER] == 0) {
    if (s->ii[0] < 1)
      return 0;
    else
      return jbg_ceil_half(s->xd, s->d - (s->ii[0] - 1));
  }

  return s->xd;
}


/*
 * After jbg_dec_in() returned JBG_EOK or JBG_EOK_INTR, you can call this
 * function in order to find out the height of the image. Returns 0 if
 * there is no image available yet.
 */
unsigned long jbg_dec_getheight(const struct jbg_dec_state *s)
{
  if (s->d < 0)
    return 0;
  if (iindex[s->order & 7][LAYER] == 0) {
    if (s->ii[0] < 1)
      return 0;
    else
      return jbg_ceil_half(s->yd, s->d - (s->ii[0] - 1));
  }
  
  return s->yd;
}


/*
 * After jbg_dec_in() returned JBG_EOK or JBG_EOK_INTR, you can call this
 * function in order to get a pointer to the image. Returns NULL if
 * there is no image available yet.
 */
unsigned char *jbg_dec_getimage(const struct jbg_dec_state *s, int plane)
{
  if (s->d < 0)
    return NULL;
  if (iindex[s->order & 7][LAYER] == 0) {
    if (s->ii[0] < 1)
      return NULL;
    else
      return s->lhp[(s->ii[0] - 1) & 1][plane];
  }
  
  return s->lhp[s->d & 1][plane];
}


/*
 * After jbg_dec_in() returned JBG_EOK or JBG_EOK_INTR, you can call
 * this function in order to find out the size in bytes of one
 * bitplane of the image.
 */
unsigned long jbg_dec_getsize(const struct jbg_dec_state *s)
{
  if (s->d < 0)
    return 0;
  if (iindex[s->order & 7][LAYER] == 0) {
    if (s->ii[0] < 1)
      return 0;
    else
      return 
	jbg_ceil_half(s->xd, s->d - (s->ii[0] - 1) + 3) * /* overflow risk? */
	jbg_ceil_half(s->yd, s->d - (s->ii[0] - 1));
  }
  
  return jbg_ceil_half(s->xd, 3) * s->yd;
}


/*
 * After jbg_dec_in() returned JBG_EOK or JBG_EOK_INTR, you can call
 * this function in order to find out the size of the image that you
 * can retrieve with jbg_merge_planes().
 */
unsigned long jbg_dec_getsize_merged(const struct jbg_dec_state *s)
{
  if (s->d < 0)
    return 0;
  if (iindex[s->order & 7][LAYER] == 0) {
    if (s->ii[0] < 1)
      return 0;
    else
      return 
	jbg_ceil_half(s->xd, s->d - (s->ii[0] - 1)) * /* overflow risk? */
	jbg_ceil_half(s->yd, s->d - (s->ii[0] - 1)) *
	((s->planes + 7) / 8);
  }
  
  return s->xd * s->yd * ((s->planes + 7) / 8);
}


/* 
 * The destructor function which releases any resources obtained by the
 * other decoder functions.
 */
void jbg_dec_free(struct jbg_dec_state *s)
{
  int i;

  if (s->d < 0 || s->s == NULL)
    return;
  s->d = -2;

  for (i = 0; i < s->planes; i++) {
    checked_free(s->s[i]);
    checked_free(s->tx[i]);
    checked_free(s->ty[i]);
    checked_free(s->reset[i]);
    checked_free(s->lntp[i]);
    checked_free(s->lhp[0][i]);
    checked_free(s->lhp[1][i]);
  }
  
  checked_free(s->s);
  checked_free(s->tx);
  checked_free(s->ty);
  checked_free(s->reset);
  checked_free(s->lntp);
  checked_free(s->lhp[0]);
  checked_free(s->lhp[1]);
  if (s->dppriv && s->dppriv != jbg_dptable)
    checked_free(s->dppriv);

  s->s = NULL;

  return;
}


/*
 * Split bigendian integer pixel field into separate bit planes. In the
 * src array, every pixel is represented by a ((has_planes + 7) / 8) byte
 * long word, most significant byte first. While has_planes describes
 * the number of used bits per pixel in the source image, encode_plane
 * is the number of most significant bits among those that we
 * actually transfer to dest.
 */
void jbg_split_planes(unsigned long x, unsigned long y, int has_planes,
		      int encode_planes,
		      const unsigned char *src, unsigned char **dest,
		      int use_graycode)
{
  unsigned long bpl = jbg_ceil_half(x, 3);  /* bytes per line in dest plane */
  unsigned long line, i;
  unsigned k = 8;
  int p;
  unsigned prev;     /* previous *src byte shifted by 8 bit to the left */
  register int bits, msb = has_planes - 1;
  int bitno;

  /* sanity checks */
  if (encode_planes > has_planes)
    encode_planes = has_planes;
  use_graycode = use_graycode != 0 && encode_planes > 1;
  
  for (p = 0; p < encode_planes; p++)
    memset(dest[p], 0, bpl * y);
  
  for (line = 0; line < y; line++) {                 /* lines loop */
    for (i = 0; i * 8 < x; i++) {                    /* dest bytes loop */
      for (k = 0; k < 8 && i * 8 + k < x; k++) {     /* pixel loop */
	prev = 0;
	for (p = 0; p < encode_planes; p++) {        /* bit planes loop */
	  /* calculate which bit in *src do we want */
	  bitno = (msb - p) & 7;
	  /* put this bit with its left neighbor right adjusted into bits */
	  bits = (prev | *src) >> bitno;
	  /* go to next *src byte, but keep old */
	  if (bitno == 0)
	    prev = *src++ << 8;
	  /* make space for inserting new bit */
	  dest[p][bpl * line + i] <<= 1;
	  /* insert bit, if requested apply Gray encoding */
	  dest[p][bpl * line + i] |= (bits ^ (use_graycode & (bits>>1))) & 1;
	  /*
	   * Theorem: Let b(n),...,b(1),b(0) be the digits of a
	   * binary word and let g(n),...,g(1),g(0) be the digits of the
	   * corresponding Gray code word, then g(i) = b(i) xor b(i+1).
	   */
	}
	/* skip unused *src bytes */
	for (;p < has_planes; p++)
	  if (((msb - p) & 7) == 0)
	    src++;
      }
    }
    for (p = 0; p < encode_planes; p++)              /* right padding loop */
      dest[p][bpl * (line + 1) - 1] <<= 8 - k;
  }
  
  return;
}

/* 
 * Merge the separate bit planes decoded by the JBIG decoder into an
 * integer pixel field. This is essentially the counterpart to
 * jbg_split_planes().
 */
void jbg_dec_merge_planes(const struct jbg_dec_state *s, int use_graycode,
			  void (*data_out)(unsigned char *start, size_t len,
					   void *file), void *file)
{
#define BUFLEN 4096
  unsigned long bpl, line, i;
  unsigned k = 8;
  int p;
  unsigned char buf[BUFLEN];
  unsigned char *bp = buf;
  unsigned char **src;
  unsigned long x, y;
  unsigned v;

  /* sanity check */
  use_graycode = use_graycode != 0;
  
  x = jbg_dec_getwidth(s);
  y = jbg_dec_getheight(s);
  if (x == 0 || y == 0)
    return;
  bpl = jbg_ceil_half(x, 3);   /* bytes per line in src plane */

  if (iindex[s->order & 7][LAYER] == 0)
    if (s->ii[0] < 1)
      return;
    else
      src = s->lhp[(s->ii[0] - 1) & 1];
  else
    src = s->lhp[s->d & 1];
  
  for (line = 0; line < y; line++) {                    /* lines loop */
    for (i = 0; i * 8 < x; i++) {                       /* src bytes loop */
      for (k = 0; k < 8 && i * 8 + k < x; k++) {        /* pixel loop */
	v = 0;
	for (p = 0; p < s->planes;) {                   /* dest bytes loop */
	  do {
	    v = (v << 1) |
	      (((src[p][bpl * line + i] >> (7 - k)) & 1) ^
	       (use_graycode & v));
	  } while ((s->planes - ++p) & 7);
	  *bp++ = v;
	  if (bp - buf == BUFLEN) {
	    data_out(buf, BUFLEN, file);
	    bp = buf;
	  }
	}
      }
    }
  }
  
  if (bp - buf > 0)
    data_out(buf, bp - buf, file);
  
  return;
}


/*
 * Given a pointer p to the first byte of either a marker segment or a
 * PSCD, as well as the length len of the remaining data, return
 * either the pointer to the first byte of the next marker segment or
 * PSCD, or p+len if this was the last one, or NULL if some error was
 * encountered. Possible errors are:
 *
 *  - not enough bytes left for complete marker segment
 *  - no marker segment terminates the PSCD
 *  - unknown marker code encountered
 *  
 */
unsigned char *jbg_next_pscdms(unsigned char *p, size_t len)
{
  unsigned char *pp;
  unsigned long l;

  if (len < 2)
    return NULL; /* not enough bytes left for complete marker segment */

  if (p[0] != MARKER_ESC || p[1] == MARKER_STUFF) {
    do {
      while (p[0] == MARKER_ESC && p[1] == MARKER_STUFF) {
	p += 2;
	len -= 2;
	if (len < 2)
	  return NULL; /* not enough bytes left for complete marker segment */
      }
      assert(len >= 2);
      pp = (unsigned char *) memchr(p, MARKER_ESC, len - 1);
      if (!pp)
	return NULL; /* no marker segment terminates the PSCD */
      l = pp - p;
      assert(l < len);
      p += l;
      len -= l;
    } while (p[1] == MARKER_STUFF);
  } else {
    switch (p[1]) {
    case MARKER_SDNORM:
    case MARKER_SDRST:
    case MARKER_ABORT:
      return p + 2;
    case MARKER_NEWLEN:
      if (len < 6)
	return NULL; /* not enough bytes left for complete marker segment */
      return p + 6;
    case MARKER_ATMOVE:
      if (len < 8)
	return NULL; /* not enough bytes left for complete marker segment */
      return p + 8;
    case MARKER_COMMENT:
      if (len < 6)
	return NULL; /* not enough bytes left for complete marker segment */
      l = (((long) p[2] << 24) | ((long) p[3] << 16) |
	   ((long) p[4] <<  8) |  (long) p[5]);
      if (len - 6 < l)
	return NULL; /* not enough bytes left for complete marker segment */
      return p + 6 + l;
    default:
      /* unknown marker sequence encountered */
      return NULL;
    }
  }

  return p;
}


/*
 * Scan a complete BIE for a NEWLEN marker segment, then read the new
 * YD value found in it and use it to overwrite the one in the BIE
 * header. Use this procedure if a BIE initially declares an
 * unreasonably high provisional YD value (e.g., 0xffffffff) or
 * depends on the fact that section 6.2.6.2 of ITU-T T.82 says that a
 * NEWLEN marker segment "could refer to a line in the immediately
 * preceding stripe due to an unexpected termination of the image or
 * the use of only such stripe". ITU-T.85 explicitely suggests the
 * use of this for fax machines that start transmission before having
 * encountered the end of the page. None of this is necessary for
 * BIEs produced by JBIG-KIT, which normally does not use NEWLEN.
 */
int jbg_newlen(unsigned char *bie, size_t len)
{
  unsigned char *p = bie + 20;
  int i;
  unsigned long y, yn;

  if (len < 20)
    return JBG_EAGAIN;
  if ((bie[19] & (JBG_DPON | JBG_DPPRIV | JBG_DPLAST))
      == (JBG_DPON | JBG_DPPRIV))
    p += 1728; /* skip DPTABLE */
  if (p >= bie + len)
    return JBG_EAGAIN;

  while ((p = jbg_next_pscdms(p, len - (p - bie)))) {
    if (p == bie + len)
      return JBG_EOK;
    else if (p[0] == MARKER_ESC)
      switch (p[1]) {
      case MARKER_NEWLEN:
	y = (((long) bie[ 8] << 24) | ((long) bie[ 9] << 16) |
	     ((long) bie[10] <<  8) |  (long) bie[11]);
	yn = (((long) p[2] << 24) | ((long) p[3] << 16) |
	      ((long) p[4] <<  8) |  (long) p[5]);
	if (yn > y) return JBG_EINVAL | 12;
	/* overwrite YD in BIH with YD from NEWLEN */
	for (i = 0; i < 4; i++) {
	  bie[8+i] = p[2+i];
	}
	return JBG_EOK;
      case MARKER_ABORT:
	return JBG_EABORT;
      }
  }
  return JBG_EINVAL | 0;
}