breaking-change-rules.md

Breaking Change Rules

• Behavioral Changes

  • Property, Field, Parameter and Return Values
  • Exceptions
  • Platform Support
  • Code

• Source and Binary Compatibility Changes

  • Assemblies
  • Types
  • Members
  • Signatures
  • Attributes

Behavioral Changes

Property, Field, Parameter and Return Values

✓ Allowed

• Increasing the range of accepted values for a property or parameter if the member is not virtual

Note that the range can only increase to the extent that it does not impact the static type. e.g. it is OK to remove if (x > 10) throw new ArgumentOutOfRangeException("x"), but it is not OK to change the type of x from int to long.

• Returning a value of a more derived type for a property, field, return or out value

Note, again, that the static type cannot change. e.g. it is OK to return a string instance where an object was returned previously, but it is not OK to change the return type from object to string.

✗ Disallowed

• Increasing the range of accepted values for a property or parameter if the member is virtual

This is breaking because any existing overridden members will now not function correctly for the extended range of values.

• Decreasing the range of accepted values for a property or parameter, such as a change in parsing of input and throwing new errors (even if parsing behavior is not specified in the docs)

• Increasing the range of returned values for a property, field, return or out value

• Changing the returned values for a property, field, return or 'out' value, such as the value returned from ToString

If you had an API which returned a value from 0-10, but actually intended to divide the value by two and forgot (return only 0-5) then changing the return to now give the correct value is a breaking.

• Changing the default value for a property, field or parameter (either via an overload or default value)

• Changing the value of an enum member

• Changing the precision of a numerical return value

Exceptions

✓ Allowed

• Throwing a more derived exception than an existing exception

For example, CultureInfo.GetCultureInfo(String) used to throw ArgumentException in .NET Framework 3.5. In .NET Framework 4.0, this was changed to throw CultureNotFoundException which derives from ArgumentException, and therefore is an acceptable change.

• Throwing a more specific exception than NotSupportedException, NotImplementedException, NullReferenceException or an exception that is considered unrecoverable

Unrecoverable exceptions should not be getting caught and will be dealt with on a broad level by a high-level catch-all handler. Therefore, users are not expected to have code that catches these explicit exceptions. The unrecoverable exceptions are:

• StackOverflowException
• SEHException
• ExecutionEngineException
• AccessViolationException

• Throwing a new exception that only applies to a code-path which can only be observed with new parameter values, or state (that couldn't hit by existing code targeting the previous version)

• Removing an exception that was being thrown when the API allows more robust behavior or enables new scenarios

For example, a Divide method which only worked on positive values, but threw an exception otherwise, can be changed to support all values and the exception is no longer thrown.

✗ Disallowed

• Throwing a new exception in any other case not listed above

• Removing an exception in any other case not listed above

Platform Support

✓ Allowed

• An operation previously not supported on a specific platform, is now supported

✗ Disallowed

• An operation previously supported on a specific platform is no longer supported, or now requires a specific service-pack

Code

✓ Allowed

• A change which is directly intended to increase performance of an operation

The ability to modify the performance of an operation is essential in order to ensure we stay competitive, and we continue to give users operational benefits. This can break anything which relies upon the current speed of an operation, sometimes visible in badly built code relying upon asynchronous operations. Note that the performance change should have no affect on other behavior of the API in question, otherwise the change will be breaking.

• A change which indirectly, and often adversely, affects performance

Assuming the change in question is not categorized as breaking for some other reason, this is acceptable. Often, actions need to be taken which may include extra operation calls, or new functionality. This will almost always affect performance, but may be essential to make the API in question function as expected.

• Changing the text of an error message

Not only should users not rely on these text messages, but they change anyways based on culture

• Calling a brand new event that wasn't previously defined.

✗ Disallowed

• Adding the checked keyword to a code-block

This may cause code in a block to to begin to throwing exceptions, an unacceptable change.

• Changing the order in which events are fired

Developers can reasonably expect events to fire in the same order.

• Removing the raising of an event on a given action

• Changing a synchronous API to asynchronous (and vice versa)

• Firing an existing event when it was never fired before

• Changing the number of times given events are called

Source and Binary Compatibility Changes

Assemblies

✓ Allowed

• Making an assembly portable when the same platforms are still supported

✗ Disallowed

• Changing the name of an assembly

• Changing the public key of an assembly

Types

✓ Allowed

• Adding the sealed or abstract keyword to a type when there are no accessible (public or protected) constructors

• Increasing the visibility of a type

• Introducing a new base class

So long as it does not introduce any new abstract members or change the semantics or behavior of existing members, a type can be introduced into a hierarchy between two existing types. For example, between .NET Framework 1.1 and .NET Framework 2.0, we introduced DbConnection as a new base class for SqlConnection which previously derived from Component.

• Adding an interface implementation to a type

This is acceptable because it will not adversely affect existing clients. Any changes which could be made to the type being changed in this situation, will have to work within the boundaries of acceptable changes defined here, in order for the new implementation to remain acceptable. Extreme caution is urged when adding interfaces that directly affect the ability of the designer or serializer to generate code or data, that cannot be consumed down-level. An example is the ISerializable interface.

• Removing an interface implementation from a type when the interface is already implemented lower in the hierarchy

• Moving a type from one assembly into another assembly

The old assembly must be marked with TypeForwardedToAttribute pointing to the new location

• Changing a struct type to a readonly struct type

✗ Disallowed

• Adding the sealed or abstract keyword to a type when there are accessible (public or protected) constructors

• Decreasing the visibility of a type

• Removing the implementation of an interface on a type

It is not breaking when you added the implementation of an interface which derives from the removed interface. For example, you removed IDisposable, but implemented IComponent, which derives from IDisposable.

• Removing one or more base classes for a type, including changing struct to class and vice versa

• Changing the namespace or name of a type

• Changing a readonly struct type to a struct type

• Changing a struct type to a ref struct type and vice versa

Members

✓ Allowed

• Adding an abstract member to a public type when there are no accessible (public or protected) constructors, or the type is sealed

• Moving a member onto a class higher in the hierarchy tree of the type from which it was removed

• Increasing the visibility of a member that is not virtual

• Decreasing the visibility of a protected member when there are no accessible (public or protected) constructors or the type is sealed

• Changing a member from abstract to virtual

• Introducing or removing an override

Make note, that introducing an override might cause previous consumers to skip over the override when calling base.

• Change from ref readonly return to ref return (except for virtual methods or interfaces)

✗ Disallowed

• Adding an member to an interface

• Adding an abstract member to a type when there are accessible (public or protected) constructors and the type is not sealed

• Adding a constructor to a class which previously had no constructor, without also adding the default constructor

• Adding an overload that precludes an existing overload, and defines different behavior

This will break existing clients that were bound to the previous overload. For example, if you have a class that has a single version of a method that accepts a uint, an existing consumer will successfully bind to that overload, if simply passing an int value. However, if you add an overload that accepts an int, recompiling or via late-binding the application will now bind to the new overload. If different behavior results, then this is a breaking change.

• Removing or renaming a member, including a getter or setter from a property or enum members

• Decreasing the visibility of a protected member when there are accessible (public or protected) constructors and the type is not sealed

• Adding or removing abstract from a member

• Removing the virtual keyword from a member

• Adding virtual to a member

While this change would often work without breaking too many scenarios because C# compiler tends to emit callvirt IL instructions to call non-virtual methods (callvirt performs a null check, while a normal call won't), we can't rely on it. C# is not the only language we target and the C# compiler increasingly tries to optimize callvirt to a normal call whenever the target method is non-virtual and the this is provably not null (such as a method accessed through the ?. null propagation operator). Making a method virtual would mean that consumer code would often end up calling it non-virtually.

• Change from ref return to ref readonly return

• Change from ref readonly return to ref return on a virtual method or interface

• Adding or removing static keyword from a member

Signatures

✓ Allowed

• Adding params to a parameter

• Removing readonly from a field, unless the static type of the field is a mutable value type

✗ Disallowed

• Adding readonly to a field

• Adding the FlagsAttribute to an enum

• Changing the type of a property, field, parameter or return value

• Adding, removing or changing the order of parameters

• Removing params from a parameter

• Adding or removing in, out, or ref keywords from a parameter

• Renaming a parameter (including case)

This is considered breaking for two reasons:

• It breaks late-bound scenarios, such as Visual Basic's late-binding feature and C#'s dynamic

• It breaks source compatibility when developers use named parameters.

• Changing a parameter modifier from ref to out, or vice versa

Attributes

✓ Allowed

• Changing the value of an attribute that is not observable

✗ Disallowed

• Removing an attribute

Although this item can be addressed on a case to case basis, removing an attribute will often be breaking. For example, NonSerializedAttribute

• Changing values of an attribute that is observable