TransactionFlowBindingElement.xml

<Type Name="TransactionFlowBindingElement" FullName="System.ServiceModel.Channels.TransactionFlowBindingElement">
  <TypeSignature Language="C#" Value="public sealed class TransactionFlowBindingElement : System.ServiceModel.Channels.BindingElement, System.ServiceModel.Description.IPolicyExportExtension" />
  <TypeSignature Language="ILAsm" Value=".class public auto ansi sealed beforefieldinit TransactionFlowBindingElement extends System.ServiceModel.Channels.BindingElement implements class System.ServiceModel.Description.IPolicyExportExtension" />
  <TypeSignature Language="DocId" Value="T:System.ServiceModel.Channels.TransactionFlowBindingElement" />
  <TypeSignature Language="VB.NET" Value="Public NotInheritable Class TransactionFlowBindingElement&#xA;Inherits BindingElement&#xA;Implements IPolicyExportExtension" />
  <TypeSignature Language="F#" Value="type TransactionFlowBindingElement = class&#xA;    inherit BindingElement&#xA;    interface IPolicyExportExtension" />
  <TypeSignature Language="C++ CLI" Value="public ref class TransactionFlowBindingElement sealed : System::ServiceModel::Channels::BindingElement, System::ServiceModel::Description::IPolicyExportExtension" />
  <AssemblyInfo>
    <AssemblyName>System.ServiceModel</AssemblyName>
    <AssemblyVersion>3.0.0.0</AssemblyVersion>
    <AssemblyVersion>4.0.0.0</AssemblyVersion>
  </AssemblyInfo>
  <Base>
    <BaseTypeName>System.ServiceModel.Channels.BindingElement</BaseTypeName>
  </Base>
  <Interfaces>
    <Interface>
      <InterfaceName>System.ServiceModel.Description.IPolicyExportExtension</InterfaceName>
    </Interface>
  </Interfaces>
  <Docs>
    <summary>Represents the configuration element that specifies transaction flow support for a binding. This class cannot be inherited.</summary>
    <remarks>
      <format type="text/markdown"><![CDATA[  
  
## Remarks  
 This element allows you to enable or disable incoming transaction flow in an endpoint's binding settings, as well as to specify the desired protocol format for incoming transactions.  
  
> [!CAUTION]
>  When using the <xref:System.ServiceModel.TransactionProtocol.OleTransactions%2A> protocol to flow transactions from endpoint to endpoint, the transaction timeout can be lost if the destination endpoint attempts to flow again using any protocol other than <xref:System.ServiceModel.TransactionProtocol.OleTransactions%2A>. This can cause all down-level nodes after the <xref:System.ServiceModel.TransactionProtocol.OleTransactions%2A> hop to timeout later than expected.  
  
 ]]></format>
    </remarks>
    <related type="Article" href="/dotnet/framework/wcf/feature-details/enabling-transaction-flow">Enabling Transaction Flow</related>
  </Docs>
  <Members>
    <MemberGroup MemberName=".ctor">
      <AssemblyInfo>
        <AssemblyName>System.ServiceModel</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <Docs>
        <summary>Initializes a new instance of the <see cref="T:System.ServiceModel.Channels.TransactionFlowBindingElement" /> class.</summary>
      </Docs>
    </MemberGroup>
    <Member MemberName=".ctor">
      <MemberSignature Language="C#" Value="public TransactionFlowBindingElement ();" />
      <MemberSignature Language="ILAsm" Value=".method public hidebysig specialname rtspecialname instance void .ctor() cil managed" />
      <MemberSignature Language="DocId" Value="M:System.ServiceModel.Channels.TransactionFlowBindingElement.#ctor" />
      <MemberSignature Language="VB.NET" Value="Public Sub New ()" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; TransactionFlowBindingElement();" />
      <MemberType>Constructor</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.ServiceModel</AssemblyName>
        <AssemblyVersion>3.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <Parameters />
      <Docs>
        <summary>Initializes a new instance of the <see cref="T:System.ServiceModel.Channels.TransactionFlowBindingElement" /> class.</summary>
        <remarks>To be added.</remarks>
      </Docs>
    </Member>
    <Member MemberName=".ctor">
      <MemberSignature Language="C#" Value="public TransactionFlowBindingElement (System.ServiceModel.TransactionProtocol transactionProtocol);" />
      <MemberSignature Language="ILAsm" Value=".method public hidebysig specialname rtspecialname instance void .ctor(class System.ServiceModel.TransactionProtocol transactionProtocol) cil managed" />
      <MemberSignature Language="DocId" Value="M:System.ServiceModel.Channels.TransactionFlowBindingElement.#ctor(System.ServiceModel.TransactionProtocol)" />
      <MemberSignature Language="VB.NET" Value="Public Sub New (transactionProtocol As TransactionProtocol)" />
      <MemberSignature Language="F#" Value="new System.ServiceModel.Channels.TransactionFlowBindingElement : System.ServiceModel.TransactionProtocol -&gt; System.ServiceModel.Channels.TransactionFlowBindingElement" Usage="new System.ServiceModel.Channels.TransactionFlowBindingElement transactionProtocol" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; TransactionFlowBindingElement(System::ServiceModel::TransactionProtocol ^ transactionProtocol);" />
      <MemberType>Constructor</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.ServiceModel</AssemblyName>
        <AssemblyVersion>3.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <Attributes>
        <Attribute FrameworkAlternate="netframework-4.0">
          <AttributeName Language="C#">[System.Runtime.TargetedPatchingOptOut("Performance critical to inline this type of method across NGen image boundaries")]</AttributeName>
          <AttributeName Language="F#">[&lt;System.Runtime.TargetedPatchingOptOut("Performance critical to inline this type of method across NGen image boundaries")&gt;]</AttributeName>
        </Attribute>
      </Attributes>
      <Parameters>
        <Parameter Name="transactionProtocol" Type="System.ServiceModel.TransactionProtocol" />
      </Parameters>
      <Docs>
        <param name="transactionProtocol">A <see cref="T:System.ServiceModel.TransactionProtocol" /> value that contains the transaction protocol used in flowing a transaction.</param>
        <summary>Initializes a new instance of the <see cref="T:System.ServiceModel.Channels.TransactionFlowBindingElement" /> class with the specified protocol that is used to flow a transaction.</summary>
        <remarks>
          <format type="text/markdown"><![CDATA[  
  
## Remarks  
 For more information about choosing the protocol to be used, see [Enabling Transaction Flow](/dotnet/framework/wcf/feature-details/enabling-transaction-flow).  
  
 ]]></format>
        </remarks>
      </Docs>
    </Member>
    <Member MemberName="AllowWildcardAction">
      <MemberSignature Language="C#" Value="public bool AllowWildcardAction { get; set; }" />
      <MemberSignature Language="ILAsm" Value=".property instance bool AllowWildcardAction" />
      <MemberSignature Language="DocId" Value="P:System.ServiceModel.Channels.TransactionFlowBindingElement.AllowWildcardAction" />
      <MemberSignature Language="VB.NET" Value="Public Property AllowWildcardAction As Boolean" />
      <MemberSignature Language="F#" Value="member this.AllowWildcardAction : bool with get, set" Usage="System.ServiceModel.Channels.TransactionFlowBindingElement.AllowWildcardAction" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; property bool AllowWildcardAction { bool get(); void set(bool value); };" />
      <MemberType>Property</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.ServiceModel</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <Attributes>
        <Attribute FrameworkAlternate="netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2;netframework-4.6;netframework-4.6.1;netframework-4.6.2;netframework-4.7;netframework-4.7.1;netframework-4.7.2;netframework-4.8;netframework-4.8.1">
          <AttributeName Language="C#">[System.ComponentModel.DefaultValue(false)]</AttributeName>
          <AttributeName Language="F#">[&lt;System.ComponentModel.DefaultValue(false)&gt;]</AttributeName>
        </Attribute>
        <Attribute FrameworkAlternate="netframework-4.0">
          <AttributeName Language="C#">[get: System.Runtime.TargetedPatchingOptOut("Performance critical to inline this type of method across NGen image boundaries")]</AttributeName>
          <AttributeName Language="F#">[&lt;get: System.Runtime.TargetedPatchingOptOut("Performance critical to inline this type of method across NGen image boundaries")&gt;]</AttributeName>
        </Attribute>
        <Attribute FrameworkAlternate="netframework-4.0">
          <AttributeName Language="C#">[set: System.Runtime.TargetedPatchingOptOut("Performance critical to inline this type of method across NGen image boundaries")]</AttributeName>
          <AttributeName Language="F#">[&lt;set: System.Runtime.TargetedPatchingOptOut("Performance critical to inline this type of method across NGen image boundaries")&gt;]</AttributeName>
        </Attribute>
      </Attributes>
      <ReturnValue>
        <ReturnType>System.Boolean</ReturnType>
      </ReturnValue>
      <Docs>
        <summary>Gets or sets whether wildcard action is set to be allowed on a transaction flow binding element to be cloned.</summary>
        <value>
          <see langword="true" /> if wildcard action is allowed; otherwise, <see langword="false" />.</value>
        <remarks>To be added.</remarks>
      </Docs>
    </Member>
    <Member MemberName="BuildChannelFactory&lt;TChannel&gt;">
      <MemberSignature Language="C#" Value="public override System.ServiceModel.Channels.IChannelFactory&lt;TChannel&gt; BuildChannelFactory&lt;TChannel&gt; (System.ServiceModel.Channels.BindingContext context);" />
      <MemberSignature Language="ILAsm" Value=".method public hidebysig virtual instance class System.ServiceModel.Channels.IChannelFactory`1&lt;!!TChannel&gt; BuildChannelFactory&lt;TChannel&gt;(class System.ServiceModel.Channels.BindingContext context) cil managed" />
      <MemberSignature Language="DocId" Value="M:System.ServiceModel.Channels.TransactionFlowBindingElement.BuildChannelFactory``1(System.ServiceModel.Channels.BindingContext)" />
      <MemberSignature Language="VB.NET" Value="Public Overrides Function BuildChannelFactory(Of TChannel) (context As BindingContext) As IChannelFactory(Of TChannel)" />
      <MemberSignature Language="F#" Value="override this.BuildChannelFactory : System.ServiceModel.Channels.BindingContext -&gt; System.ServiceModel.Channels.IChannelFactory&lt;'Channel&gt;" Usage="transactionFlowBindingElement.BuildChannelFactory context" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA;generic &lt;typename TChannel&gt;&#xA; override System::ServiceModel::Channels::IChannelFactory&lt;TChannel&gt; ^ BuildChannelFactory(System::ServiceModel::Channels::BindingContext ^ context);" />
      <MemberType>Method</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.ServiceModel</AssemblyName>
        <AssemblyVersion>3.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <ReturnValue>
        <ReturnType>System.ServiceModel.Channels.IChannelFactory&lt;TChannel&gt;</ReturnType>
      </ReturnValue>
      <TypeParameters>
        <TypeParameter Name="TChannel" />
      </TypeParameters>
      <Parameters>
        <Parameter Name="context" Type="System.ServiceModel.Channels.BindingContext" />
      </Parameters>
      <Docs>
        <typeparam name="TChannel">The channel type.</typeparam>
        <param name="context">The <see cref="T:System.ServiceModel.Channels.BindingContext" /> that should be used to build the channel factory.</param>
        <summary>Initializes a channel factory for producing channels of a specified type from a binding context.</summary>
        <returns>The <see cref="T:System.ServiceModel.Channels.IChannelFactory`1" /> of type <paramref name="TChannel" /> initialized from <paramref name="context" />.</returns>
        <remarks>
          <format type="text/markdown"><![CDATA[  
  
## Remarks  
 This method creates a channel factory that can be used to make outgoing channels of the specified type. This method is called by the infrastructure when building the channel stack. You should use it in your code only when you implement a custom binding element.  
  
 ]]></format>
        </remarks>
        <exception cref="T:System.ArgumentNullException">
          <paramref name="context" /> is <see langword="null" />.</exception>
        <exception cref="T:System.ArgumentException">A channel factory for the specified channel type cannot be built.</exception>
      </Docs>
    </Member>
    <Member MemberName="BuildChannelListener&lt;TChannel&gt;">
      <MemberSignature Language="C#" Value="public override System.ServiceModel.Channels.IChannelListener&lt;TChannel&gt; BuildChannelListener&lt;TChannel&gt; (System.ServiceModel.Channels.BindingContext context) where TChannel : class, System.ServiceModel.Channels.IChannel;" />
      <MemberSignature Language="ILAsm" Value=".method public hidebysig virtual instance class System.ServiceModel.Channels.IChannelListener`1&lt;!!TChannel&gt; BuildChannelListener&lt;class (class System.ServiceModel.Channels.IChannel) TChannel&gt;(class System.ServiceModel.Channels.BindingContext context) cil managed" />
      <MemberSignature Language="DocId" Value="M:System.ServiceModel.Channels.TransactionFlowBindingElement.BuildChannelListener``1(System.ServiceModel.Channels.BindingContext)" />
      <MemberSignature Language="VB.NET" Value="Public Overrides Function BuildChannelListener(Of TChannel As {Class, IChannel}) (context As BindingContext) As IChannelListener(Of TChannel)" />
      <MemberSignature Language="F#" Value="override this.BuildChannelListener : System.ServiceModel.Channels.BindingContext -&gt; System.ServiceModel.Channels.IChannelListener&lt;'Channel (requires 'Channel : null and 'Channel :&gt; System.ServiceModel.Channels.IChannel)&gt; (requires 'Channel : null and 'Channel :&gt; System.ServiceModel.Channels.IChannel)" Usage="transactionFlowBindingElement.BuildChannelListener context" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA;generic &lt;typename TChannel&gt;&#xA; where TChannel : class, System::ServiceModel::Channels::IChannel override System::ServiceModel::Channels::IChannelListener&lt;TChannel&gt; ^ BuildChannelListener(System::ServiceModel::Channels::BindingContext ^ context);" />
      <MemberType>Method</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.ServiceModel</AssemblyName>
        <AssemblyVersion>3.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <ReturnValue>
        <ReturnType>System.ServiceModel.Channels.IChannelListener&lt;TChannel&gt;</ReturnType>
      </ReturnValue>
      <TypeParameters>
        <TypeParameter Name="TChannel">
          <Constraints>
            <ParameterAttribute>ReferenceTypeConstraint</ParameterAttribute>
            <InterfaceName>System.ServiceModel.Channels.IChannel</InterfaceName>
          </Constraints>
        </TypeParameter>
      </TypeParameters>
      <Parameters>
        <Parameter Name="context" Type="System.ServiceModel.Channels.BindingContext" />
      </Parameters>
      <Docs>
        <typeparam name="TChannel">The channel type.</typeparam>
        <param name="context">The <see cref="T:System.ServiceModel.Channels.BindingContext" /> that should be used to build the channel listener.</param>
        <summary>Initializes a channel listener for accepting channels of a specified type from the binding context.</summary>
        <returns>The <see cref="T:System.ServiceModel.Channels.IChannelListener`1" /> of type <paramref name="TChannel" /> initialized from <paramref name="context" />.</returns>
        <remarks>
          <format type="text/markdown"><![CDATA[  
  
## Remarks  
 This method creates a channel listener to receive messages for this binding.  
  
 This method is called by the infrastructure when building the channel. You should use it in your code only when you implement a custom binding element.  
  
 ]]></format>
        </remarks>
        <exception cref="T:System.ArgumentNullException">
          <paramref name="context" /> is <see langword="null" />.</exception>
        <exception cref="T:System.ArgumentException">A channel listener for the specified channel type cannot be built.</exception>
      </Docs>
    </Member>
    <Member MemberName="CanBuildChannelFactory&lt;TChannel&gt;">
      <MemberSignature Language="C#" Value="public override bool CanBuildChannelFactory&lt;TChannel&gt; (System.ServiceModel.Channels.BindingContext context);" />
      <MemberSignature Language="ILAsm" Value=".method public hidebysig virtual instance bool CanBuildChannelFactory&lt;TChannel&gt;(class System.ServiceModel.Channels.BindingContext context) cil managed" />
      <MemberSignature Language="DocId" Value="M:System.ServiceModel.Channels.TransactionFlowBindingElement.CanBuildChannelFactory``1(System.ServiceModel.Channels.BindingContext)" />
      <MemberSignature Language="VB.NET" Value="Public Overrides Function CanBuildChannelFactory(Of TChannel) (context As BindingContext) As Boolean" />
      <MemberSignature Language="F#" Value="override this.CanBuildChannelFactory : System.ServiceModel.Channels.BindingContext -&gt; bool" Usage="transactionFlowBindingElement.CanBuildChannelFactory context" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA;generic &lt;typename TChannel&gt;&#xA; override bool CanBuildChannelFactory(System::ServiceModel::Channels::BindingContext ^ context);" />
      <MemberType>Method</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.ServiceModel</AssemblyName>
        <AssemblyVersion>3.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <ReturnValue>
        <ReturnType>System.Boolean</ReturnType>
      </ReturnValue>
      <TypeParameters>
        <TypeParameter Name="TChannel" />
      </TypeParameters>
      <Parameters>
        <Parameter Name="context" Type="System.ServiceModel.Channels.BindingContext" />
      </Parameters>
      <Docs>
        <typeparam name="TChannel">The channel type.</typeparam>
        <param name="context">The <see cref="T:System.ServiceModel.Channels.BindingContext" /> that should be used to determine if a channel factory can be built.</param>
        <summary>Returns a value that indicates whether the specified binding context can build a channel factory for producing channels of a specified type.</summary>
        <returns>
          <see langword="true" /> if a channel factory for the specified type of channel can be built from <paramref name="context" />; otherwise, <see langword="false" />.</returns>
        <remarks>
          <format type="text/markdown"><![CDATA[  
  
## Remarks  
 You should call this method to check that the channel factory for channels of type `TChannel` can be built for the specified `context`, before attempting to actually build the factory. Note that <xref:System.ServiceModel.Channels.TransactionFlowBindingElement.BuildChannelFactory%2A> throws an exception if it cannot build a channel factory for the specified channel type.  
  
 ]]></format>
        </remarks>
        <exception cref="T:System.ArgumentNullException">
          <paramref name="context" /> is <see langword="null" />.</exception>
      </Docs>
    </Member>
    <Member MemberName="CanBuildChannelListener&lt;TChannel&gt;">
      <MemberSignature Language="C#" Value="public override bool CanBuildChannelListener&lt;TChannel&gt; (System.ServiceModel.Channels.BindingContext context) where TChannel : class, System.ServiceModel.Channels.IChannel;" />
      <MemberSignature Language="ILAsm" Value=".method public hidebysig virtual instance bool CanBuildChannelListener&lt;class (class System.ServiceModel.Channels.IChannel) TChannel&gt;(class System.ServiceModel.Channels.BindingContext context) cil managed" />
      <MemberSignature Language="DocId" Value="M:System.ServiceModel.Channels.TransactionFlowBindingElement.CanBuildChannelListener``1(System.ServiceModel.Channels.BindingContext)" />
      <MemberSignature Language="VB.NET" Value="Public Overrides Function CanBuildChannelListener(Of TChannel As {Class, IChannel}) (context As BindingContext) As Boolean" />
      <MemberSignature Language="F#" Value="override this.CanBuildChannelListener : System.ServiceModel.Channels.BindingContext -&gt; bool (requires 'Channel : null and 'Channel :&gt; System.ServiceModel.Channels.IChannel)" Usage="transactionFlowBindingElement.CanBuildChannelListener context" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA;generic &lt;typename TChannel&gt;&#xA; where TChannel : class, System::ServiceModel::Channels::IChannel override bool CanBuildChannelListener(System::ServiceModel::Channels::BindingContext ^ context);" />
      <MemberType>Method</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.ServiceModel</AssemblyName>
        <AssemblyVersion>3.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <ReturnValue>
        <ReturnType>System.Boolean</ReturnType>
      </ReturnValue>
      <TypeParameters>
        <TypeParameter Name="TChannel">
          <Constraints>
            <ParameterAttribute>ReferenceTypeConstraint</ParameterAttribute>
            <InterfaceName>System.ServiceModel.Channels.IChannel</InterfaceName>
          </Constraints>
        </TypeParameter>
      </TypeParameters>
      <Parameters>
        <Parameter Name="context" Type="System.ServiceModel.Channels.BindingContext" />
      </Parameters>
      <Docs>
        <typeparam name="TChannel">The channel type.</typeparam>
        <param name="context">The <see cref="T:System.ServiceModel.Channels.BindingContext" /> that should be used to determine if a channel listener can be built.</param>
        <summary>Returns a value that indicates whether the specified binding context can build a channel listener for accepting channels of a specified type.</summary>
        <returns>
          <see langword="true" /> if a channel listener for the specified type of channel can be built from <paramref name="context" />; otherwise, <see langword="false" />.</returns>
        <remarks>
          <format type="text/markdown"><![CDATA[  
  
## Remarks  
 You should call this method to check that the channel listener for channels of type of `TChannel` can be built for the specified `context`, before attempting to actually build the listener. Note that <xref:System.ServiceModel.Channels.TransactionFlowBindingElement.BuildChannelListener%2A> throws an exception if it cannot build a channel listener for the specified channel type.  
  
 ]]></format>
        </remarks>
        <exception cref="T:System.ArgumentNullException">
          <paramref name="context" /> is <see langword="null" />.</exception>
      </Docs>
    </Member>
    <Member MemberName="Clone">
      <MemberSignature Language="C#" Value="public override System.ServiceModel.Channels.BindingElement Clone ();" />
      <MemberSignature Language="ILAsm" Value=".method public hidebysig virtual instance class System.ServiceModel.Channels.BindingElement Clone() cil managed" />
      <MemberSignature Language="DocId" Value="M:System.ServiceModel.Channels.TransactionFlowBindingElement.Clone" />
      <MemberSignature Language="VB.NET" Value="Public Overrides Function Clone () As BindingElement" />
      <MemberSignature Language="F#" Value="override this.Clone : unit -&gt; System.ServiceModel.Channels.BindingElement" Usage="transactionFlowBindingElement.Clone " />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; override System::ServiceModel::Channels::BindingElement ^ Clone();" />
      <MemberType>Method</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.ServiceModel</AssemblyName>
        <AssemblyVersion>3.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <ReturnValue>
        <ReturnType>System.ServiceModel.Channels.BindingElement</ReturnType>
      </ReturnValue>
      <Parameters />
      <Docs>
        <summary>Creates a duplicate of this element.</summary>
        <returns>A <see cref="T:System.ServiceModel.Channels.BindingElement" /> that is a duplicate of this element.</returns>
        <remarks>
          <format type="text/markdown"><![CDATA[  
  
## Remarks  
 This method creates a deep clone of this binding element. A deep clone of an object creates a copy of the object and a copy of everything directly or indirectly referenced by that object. (This is also called copying the entire object graph.) A shallow clone of an object, by contrast, is a copy of the object only. If the object contains references to other objects, the shallow copy does not create copies of the referred objects; instead, it copies only the references to the original objects.  
  
 ]]></format>
        </remarks>
      </Docs>
    </Member>
    <Member MemberName="GetProperty&lt;T&gt;">
      <MemberSignature Language="C#" Value="public override T GetProperty&lt;T&gt; (System.ServiceModel.Channels.BindingContext context) where T : class;" />
      <MemberSignature Language="ILAsm" Value=".method public hidebysig virtual instance !!T GetProperty&lt;class T&gt;(class System.ServiceModel.Channels.BindingContext context) cil managed" />
      <MemberSignature Language="DocId" Value="M:System.ServiceModel.Channels.TransactionFlowBindingElement.GetProperty``1(System.ServiceModel.Channels.BindingContext)" />
      <MemberSignature Language="VB.NET" Value="Public Overrides Function GetProperty(Of T As Class) (context As BindingContext) As T" />
      <MemberSignature Language="F#" Value="override this.GetProperty : System.ServiceModel.Channels.BindingContext -&gt; 'T (requires 'T : null)" Usage="transactionFlowBindingElement.GetProperty context" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA;generic &lt;typename T&gt;&#xA; where T : class override T GetProperty(System::ServiceModel::Channels::BindingContext ^ context);" />
      <MemberType>Method</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.ServiceModel</AssemblyName>
        <AssemblyVersion>3.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <ReturnValue>
        <ReturnType>T</ReturnType>
      </ReturnValue>
      <TypeParameters>
        <TypeParameter Name="T">
          <Constraints>
            <ParameterAttribute>ReferenceTypeConstraint</ParameterAttribute>
          </Constraints>
        </TypeParameter>
      </TypeParameters>
      <Parameters>
        <Parameter Name="context" Type="System.ServiceModel.Channels.BindingContext" />
      </Parameters>
      <Docs>
        <typeparam name="T">The typed object for which the method is querying.</typeparam>
        <param name="context">The <see cref="T:System.ServiceModel.Channels.BindingContext" />  
  
 that should be used to get the requested property.</param>
        <summary>Gets the typed object requested, if present, from the appropriate layer in the binding stack.</summary>
        <returns>The typed object <paramref name="T" /> requested if it is present; <see langword="null" /> if it is not.</returns>
        <remarks>
          <format type="text/markdown"><![CDATA[  
  
## Remarks  
 You can use this method to retrieve capabilities, requirements and parameters from the binding element stack. If a binding element supports returning the requested object, it returns it. If not, it delegates the call down to the next binding element in the stack. If it gets to the bottom of the stack and no binding element supported the requested object, this method returns `null`.  
  
 ]]></format>
        </remarks>
        <exception cref="T:System.ArgumentNullException">
          <paramref name="context" /> is <see langword="null" />.</exception>
      </Docs>
    </Member>
    <Member MemberName="ShouldSerializeTransactionProtocol">
      <MemberSignature Language="C#" Value="public bool ShouldSerializeTransactionProtocol ();" />
      <MemberSignature Language="ILAsm" Value=".method public hidebysig instance bool ShouldSerializeTransactionProtocol() cil managed" />
      <MemberSignature Language="DocId" Value="M:System.ServiceModel.Channels.TransactionFlowBindingElement.ShouldSerializeTransactionProtocol" />
      <MemberSignature Language="VB.NET" Value="Public Function ShouldSerializeTransactionProtocol () As Boolean" />
      <MemberSignature Language="F#" Value="member this.ShouldSerializeTransactionProtocol : unit -&gt; bool" Usage="transactionFlowBindingElement.ShouldSerializeTransactionProtocol " />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; bool ShouldSerializeTransactionProtocol();" />
      <MemberType>Method</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.ServiceModel</AssemblyName>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <Attributes>
        <Attribute FrameworkAlternate="netframework-4.0;netframework-4.5;netframework-4.5.1;netframework-4.5.2;netframework-4.6;netframework-4.6.1;netframework-4.6.2;netframework-4.7;netframework-4.7.1;netframework-4.7.2;netframework-4.8;netframework-4.8.1">
          <AttributeName Language="C#">[System.ComponentModel.EditorBrowsable(System.ComponentModel.EditorBrowsableState.Never)]</AttributeName>
          <AttributeName Language="F#">[&lt;System.ComponentModel.EditorBrowsable(System.ComponentModel.EditorBrowsableState.Never)&gt;]</AttributeName>
        </Attribute>
      </Attributes>
      <ReturnValue>
        <ReturnType>System.Boolean</ReturnType>
      </ReturnValue>
      <Parameters />
      <Docs>
        <summary>Returns whether the transaction protocol used for transaction flow can be serialized.</summary>
        <returns>
          <see langword="true" /> if the transaction protocol can be serialized; otherwise, <see langword="false" />.</returns>
        <remarks>To be added.</remarks>
      </Docs>
    </Member>
    <Member MemberName="System.ServiceModel.Description.IPolicyExportExtension.ExportPolicy">
      <MemberSignature Language="C#" Value="void IPolicyExportExtension.ExportPolicy (System.ServiceModel.Description.MetadataExporter exporter, System.ServiceModel.Description.PolicyConversionContext context);" />
      <MemberSignature Language="ILAsm" Value=".method hidebysig newslot virtual instance void System.ServiceModel.Description.IPolicyExportExtension.ExportPolicy(class System.ServiceModel.Description.MetadataExporter exporter, class System.ServiceModel.Description.PolicyConversionContext context) cil managed" />
      <MemberSignature Language="DocId" Value="M:System.ServiceModel.Channels.TransactionFlowBindingElement.System#ServiceModel#Description#IPolicyExportExtension#ExportPolicy(System.ServiceModel.Description.MetadataExporter,System.ServiceModel.Description.PolicyConversionContext)" />
      <MemberSignature Language="VB.NET" Value="Sub ExportPolicy (exporter As MetadataExporter, context As PolicyConversionContext) Implements IPolicyExportExtension.ExportPolicy" />
      <MemberSignature Language="F#" Value="abstract member System.ServiceModel.Description.IPolicyExportExtension.ExportPolicy : System.ServiceModel.Description.MetadataExporter * System.ServiceModel.Description.PolicyConversionContext -&gt; unit&#xA;override this.System.ServiceModel.Description.IPolicyExportExtension.ExportPolicy : System.ServiceModel.Description.MetadataExporter * System.ServiceModel.Description.PolicyConversionContext -&gt; unit" Usage="transactionFlowBindingElement.System.ServiceModel.Description.IPolicyExportExtension.ExportPolicy (exporter, context)" />
      <MemberSignature Language="C++ CLI" Value=" virtual void System.ServiceModel.Description.IPolicyExportExtension.ExportPolicy(System::ServiceModel::Description::MetadataExporter ^ exporter, System::ServiceModel::Description::PolicyConversionContext ^ context) = System::ServiceModel::Description::IPolicyExportExtension::ExportPolicy;" />
      <MemberType>Method</MemberType>
      <Implements>
        <InterfaceMember>M:System.ServiceModel.Description.IPolicyExportExtension.ExportPolicy(System.ServiceModel.Description.MetadataExporter,System.ServiceModel.Description.PolicyConversionContext)</InterfaceMember>
      </Implements>
      <AssemblyInfo>
        <AssemblyName>System.ServiceModel</AssemblyName>
        <AssemblyVersion>3.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <ReturnValue>
        <ReturnType>System.Void</ReturnType>
      </ReturnValue>
      <Parameters>
        <Parameter Name="exporter" Type="System.ServiceModel.Description.MetadataExporter" />
        <Parameter Name="context" Type="System.ServiceModel.Description.PolicyConversionContext" />
      </Parameters>
      <Docs>
        <param name="exporter">The <see cref="T:System.ServiceModel.Description.MetadataExporter" /> to be used when exporting the policy of this binding element.</param>
        <param name="context">The <see cref="T:System.ServiceModel.Description.PolicyConversionContext" /> to be used when exporting the policy of this binding element.</param>
        <summary>Exports a custom policy assertion about the binding.</summary>
        <remarks>To be added.</remarks>
        <exception cref="T:System.ArgumentNullException">
          <paramref name="context" /> is <see langword="null" />.</exception>
      </Docs>
    </Member>
    <Member MemberName="TransactionProtocol">
      <MemberSignature Language="C#" Value="public System.ServiceModel.TransactionProtocol TransactionProtocol { get; set; }" />
      <MemberSignature Language="ILAsm" Value=".property instance class System.ServiceModel.TransactionProtocol TransactionProtocol" />
      <MemberSignature Language="DocId" Value="P:System.ServiceModel.Channels.TransactionFlowBindingElement.TransactionProtocol" />
      <MemberSignature Language="VB.NET" Value="Public Property TransactionProtocol As TransactionProtocol" />
      <MemberSignature Language="F#" Value="member this.TransactionProtocol : System.ServiceModel.TransactionProtocol with get, set" Usage="System.ServiceModel.Channels.TransactionFlowBindingElement.TransactionProtocol" />
      <MemberSignature Language="C++ CLI" Value="public:&#xA; property System::ServiceModel::TransactionProtocol ^ TransactionProtocol { System::ServiceModel::TransactionProtocol ^ get(); void set(System::ServiceModel::TransactionProtocol ^ value); };" />
      <MemberType>Property</MemberType>
      <AssemblyInfo>
        <AssemblyName>System.ServiceModel</AssemblyName>
        <AssemblyVersion>3.0.0.0</AssemblyVersion>
        <AssemblyVersion>4.0.0.0</AssemblyVersion>
      </AssemblyInfo>
      <Attributes>
        <Attribute FrameworkAlternate="netframework-4.0">
          <AttributeName Language="C#">[get: System.Runtime.TargetedPatchingOptOut("Performance critical to inline this type of method across NGen image boundaries")]</AttributeName>
          <AttributeName Language="F#">[&lt;get: System.Runtime.TargetedPatchingOptOut("Performance critical to inline this type of method across NGen image boundaries")&gt;]</AttributeName>
        </Attribute>
      </Attributes>
      <ReturnValue>
        <ReturnType>System.ServiceModel.TransactionProtocol</ReturnType>
      </ReturnValue>
      <Docs>
        <summary>Gets or sets the transaction protocol used in flowing a transaction.</summary>
        <value>A <see cref="T:System.ServiceModel.TransactionProtocol" /> that specifies the transaction protocol to be used for transaction flow. The default is <see cref="P:System.ServiceModel.TransactionProtocol.OleTransactions" />.</value>
        <remarks>
          <format type="text/markdown"><![CDATA[  
  
## Remarks  
 For more information about choosing the protocol to be used, see [Enabling Transaction Flow](/dotnet/framework/wcf/feature-details/enabling-transaction-flow).  
  
 ]]></format>
        </remarks>
      </Docs>
    </Member>
  </Members>
</Type>