Transition Time with no effect #197
Comments
You mean with the scenes? |
Yes with Scenes. Got it to work (have to set Brightness also). But Tradfri Driver does not seem to support it. It has no effect Edit: no it is not the tradfri driver. Some tradfri bulbs work, some just go directly to 100% |
Hmm, okay. I'm gonna go test it out. But if it is because of the device, i.e. if it is not supported by some IKEA lamps, then I probably can't do much. |
I have no hub so I can't check for updates. Bulbs are all same charge. Some of them work, some don't. |
Okay. I have now tested it and can confirm the problem. After consultation with a colleague, it can be assumed that the IKEA lights are to blame. But a solution is being worked on. |
Okay thank you |
As there hasn't been any response in 21 days, this issue has been automatically marked as stale. At OP: Please either close this issue or keep it active It will be closed in 7 days if no further activity occurs. |
As there hasn't been any response in 28 days, this issue will be closed. @ OP: If this issue is solved post what fixed it for you. If it isn't solved, request to get this opened again. |
New insights (since there was no change since then): No i have to create 2 scenes:
This works also with the tradfri driver. It seems that the transition is set after the bulbs (on, brightness) are set: https://pastebin.com/sg3qfHX2 |
Hi,
I am using Phoscon on an RP4 headless with a Conbee 2.
The setting Transition Time seems to have no effect. Light are on directly without fading time (i.e. 10 Minutes).
How do i use this?
greetz
boehser enkel
The text was updated successfully, but these errors were encountered: