README

This is Mono.

	1. Installation
	2. Using Mono
	3. Directory Roadmap

1. Compilation and Installation
===============================

   a. Build Requirements
   ---------------------

	To build Mono, you will need the following components:

		* pkg-config

		  Available from: http://www.freedesktop.org/Software/pkgconfig

		* glib 2.4

		  Available from: http://www.gtk.org/

	On Itanium, you must obtain libunwind:

		http://www.hpl.hp.com/research/linux/libunwind/download.php4

	On Solaris, make sure that you used GNU tar to unpack this package, as
	Solaris tar will not unpack this correctly, and you will get strange errors.

	On Solaris, make sure that you use the GNU toolchain to build the software.

	Optional dependencies:

		* libgdiplus

		  If you want to get support for System.Drawing, you will need to get
		  Libgdiplus.

		* libzlib

		  This library and the development headers are required for compression
		  file support in the 2.0 profile.

    b. Building the Software
    ------------------------
  	
	If you obtained this package as an officially released tarball,
	this is very simple, use configure and make:

		./configure --prefix=/usr/local
		make
		make install

	Mono supports a JIT engine on x86, SPARC, SPARCv9, S/390, AMD64, ARM
	and PowerPC systems.

	If you obtained this as a snapshot, you will need an existing
	Mono installation.  To upgrade your installation, unpack both
	mono and mcs:

		tar xzf mcs-XXXX.tar.gz
		tar xzf mono-XXXX.tar.gz
		mv mono-XXX mono
		mv mcs-XXX mcs
		cd mono
		./autogen.sh --prefix=/usr/local
		make

    c. Building the software from SVN
    ---------------------------------

	If you are building the software from SVN, make sure that you
	have up-to-date mcs and mono sources:

		svn co svn+ssh://USER@mono-cvs.ximian.com/source/trunk/mono
		svn co svn+ssh://USER@mono-cvs.ximian.com/source/trunk/mcs

	Then, go into the mono directory, and configure:

		cd mono
		./autogen.sh --prefix=/usr/local
		make

	For people with non-standard installations of the auto* utils and of
	pkg-config (common on misconfigured OSX and windows boxes), you could get
	an error like this:

	./configure: line 19176: syntax error near unexpected token `PKG_CHECK_MODULES(BASE_DEPENDENCIES,' ...

	This means that you need to set the ACLOCAL_FLAGS environment var
	when invoking autogen.sh, like this:

		ACLOCAL_FLAGS="-I $acprefix/share/aclocal" ./autogen.sh --prefix=/usr/loca
	
	where $acprefix is the prefix where aclocal has been installed.

	This will automatically go into the mcs/ tree and build the
	binaries there.

	This assumes that you have a working mono installation, and that
	there's a C# compiler named 'mcs', and a corresponding IL
	runtime called 'mono'.  You can use two make variables
	EXTERNAL_MCS and EXTERNAL_RUNTIME to override these.  e.g., you
	can say

	  make EXTERNAL_MCS=/foo/bar/mcs EXTERNAL_RUNTIME=/somewhere/else/mono
	
	If you don't have a working Mono installation
	---------------------------------------------

	If you don't have a working Mono installation, an obvious choice
	is to install the latest released packages of 'mono' for your
	distribution and running autogen.sh; make; make install in the
	mono module directory.

	You can also try a slightly more risky approach: this may not work,
	so start from the released tarball as detailed above.

	This works by first getting the latest version of the 'monolite'
	distribution, which contains just enough to run the 'mcs'
	compiler.  You do this with:

		make get-monolite-latest

	This will download and automatically gunzip and untar the
	tarball, and place the files appropriately so that you can then
	just run:

		make

	To ensure that you're using the 'monolite' distribution, you can
	also try passing EXTERNAL_MCS=false on the make command-line.

	Testing and Installation
	 ------------------------

	You can run (part of) the mono and mcs testsuites with the command:

		make check

	All tests should pass.  

	If you want more extensive tests, including those that test the
	class libraries, you need to re-run 'configure' with the
	'--enable-nunit-tests' flag, and try

		make -k check

	Expect to find a few testsuite failures.  As a sanity check, you
	can compare the failures you got with

		http://go-mono.com/tests/displayTestResults.php

	You can now install mono with:

		make install

	Failure to follow these steps may result in a broken installation. 

    d. Common Configuration Options
    -------------------------------

	The following are the configuration options that someone
	building Mono might want to use:
	

	--with-gc=[boehm, included, sgen, none]

		Selects the garbage collector engine to use, the
	  	default is the "included" value.
	
		included: 
			This is the default value, and its
	  		the most feature complete, it will allow Mono
		  	to use typed allocations and support the
		  	debugger.

			It is essentially a slightly modified Boehm GC

		boehm:
			This is used to use a system-install Boehm GC,
			it is useful to test new features available in
			Boehm GC, but we do not recommend that people
			use this, as it disables a few features.

		sgen:
			The under-development Generational GC for
		  	Mono, do not use this in production.

		none:
			Disables the inclusion of a garbage
		  	collector.  

	--with-tls=__thread,pthread

		Controls how Mono should access thread local storage,
	  	pthread forces Mono to use the pthread APIs, while
	  	__thread uses compiler-optimized access to it.

	  	Although __thread is faster, it requires support from
	  	the compiler, kernel and libc.   Old Linux systems do
	  	not support with __thread.

		This value is typically pre-configured and there is no
	  	need to set it, unless you are trying to debug a
	  	problem.

	--with-sigaltstack=yes,no

		This controls whether Mono will install a special
	  	signal handler to handle stack overflows.   If set to
	  	"yes", it will turn stack overflows into the
	  	StackOverflowException.  Otherwise when a stack
	  	overflow happens, your program will receive a
	  	segmentation fault.

		The configure script will try to detect if your
	  	operating system supports this.   Some older Linux
	  	systems do not support this feature, or you might want
	  	to override the auto-detection.

	--with-static-mono=yes,no

		This controls whether `mono' should link against a
	  	static library (libmono.a) or a shared library
	  	(libmono.so). 

		This defaults to yes, and will improve the performance
	  	of the `mono' program. 

		This only affects the `mono' binary, the shared
	  	library libmono.so will always be produced for
	  	developers that want to embed the runtime in their
	  	application.

	--with-xen-opt=yes,no

		The default value for this is `yes', and it makes Mono
	  	generate code which might be slightly slower on
	  	average systems, but the resulting executable will run
	  	faster under the Xen virtualization system.

	--with-large-heap=yes,no

		Enable support for GC heaps larger than 3GB.

		This value is set to `no' by default.

	--with-ikvm-native=yes,no

		Controls whether the IKVM JNI interface library is
	  	built or not.  This is used if you are planning on
	  	using the IKVM Java Virtual machine with Mono.

		This defaults to `yes'.

	--with-preview=yes,no

		Whether you want to build libraries that are still not
	  	completed (The 2.0 APIs).   It defaults to `yes'.

	--with-libgdiplus=installed,sibling,<path>

		This is used to configure where should Mono look for
	  	libgdiplus when running the System.Drawing tests.

		It defaults to `installed', which means that the
	  	library is available to Mono through the regular
	  	system setup.

		`sibling' can be used to specify that a libgdiplus
	  	that resides as a sibling of this directory (mono)
	  	should be used.

		Or you can specify a path to a libgdiplus.

	--enable-minimal=LIST

		Use this feature to specify optional runtime
	  	components that you might not want to include.  This
	  	is only useful for developers embedding Mono that
	  	require a subset of Mono functionality.

		The list is a comma-separated list of components that
	  	should be removed, these are:

		aot:
			Disables support for the Ahead of Time
	  		compilation.

		profiler:
			Disables support for the default profiler.

	 	decimal:
			Disables support for System.Decimal.

		pinvoke:
			Support for Platform Invocation services,
			disabling this will drop support for any
			libraries using DllImport.

		debug:
			Drop debugging support.

		reflection_emit:
			Drop System.Reflection.Emit support

		large_code:
			Disables support for large assemblies.

		logging:
	  		Disables support for debug logging.

		com:
			Disables COM support.

		ssa:
			Disables compilation for the SSA optimization
			framework, and the various SSA-based
		  	optimizations.

		generics:
			Generics support.  Disabling this will not
			allow Mono to run any 2.0 libraries or
			code that contains generics.
	  	
	--disable-dev-random

		Mono uses /dev/random to obtain good random data for
	  	any source that requires random numbers.   If your
	  	system does not support this, you might want to
	  	disable it.

		There are a number of runtime options to control this
	  	also, see the man page.


2. Using Mono
=============

	Once you have installed the software, you can run a few programs:

	* runtime engine

		mono program.exe

	* C# compiler

		mcs program.cs

	* CIL Disassembler

		monodis program.exe

	See the man pages for mono(1), mint(1), monodis(1) and mcs(2)
	for further details.

3. Directory Roadmap
====================

	docs/
		Technical documents about the Mono runtime.

	data/
		Configuration files installed as part of the Mono runtime.

	mono/
		The core of the Mono Runtime.

		metadata/
			The object system and metadata reader.

		mini/
			The Just in Time Compiler.

		dis/
			CIL executable Disassembler

		cli/
			Common code for the JIT and the interpreter.

		io-layer/
			The I/O layer and system abstraction for 
			emulating the .NET IO model.

		cil/
			Common Intermediate Representation, XML
			definition of the CIL bytecodes.

		interp/
			Interpreter for CLI executables (obsolete).

		arch/
			Architecture specific portions.

	man/

		Manual pages for the various Mono commands and programs.

	scripts/

		Scripts used to invoke Mono and the corresponding program.

	runtime/

		A directory that contains the Makefiles that link the
		mono/ and mcs/ build systems.