You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
root@pve1:~# sas2ircu list
LSI Corporation SAS2 IR Configuration Utility.
Version 20.00.00.00 (2014.09.18)
Copyright (c) 2008-2014 LSI Corporation. All rights reserved.
Adapter Vendor Device SubSys SubSys
Index Type ID ID Pci Address Ven ID Dev ID
----- ------------ ------ ------ ----------------- ------ ------
0 SAS2004 1000h 70h 00h:01h:00h:00h 1000h 3010h
SAS2IRCU: Utility Completed Successfully.
root@pve1:~# sas2ircu 0 DISPLAY
LSI Corporation SAS2 IR Configuration Utility.
Version 20.00.00.00 (2014.09.18)
Copyright (c) 2008-2014 LSI Corporation. All rights reserved.
Read configuration has been initiated for controller 0
------------------------------------------------------------------------
Controller information
------------------------------------------------------------------------
Controller type : SAS2004
BIOS version : 7.39.02.00
Firmware version : 20.00.07.00
Channel description : 1 Serial Attached SCSI
Initiator ID : 0
Maximum physical devices : 255
Concurrent commands supported : 1720
Slot : 10
Segment : 0
Bus : 1
Device : 0
Function : 0
RAID Support : Yes
------------------------------------------------------------------------
IR Volume information
------------------------------------------------------------------------
IR volume 1
Volume ID : 286
Status of volume : Okay (OKY)
Volume wwid : 03b1af2ecb4eb1ec
RAID level : RAID10
Size (in MB) : 278472
Physical hard disks :
PHY[0] Enclosure#/Slot# : 2:0
PHY[1] Enclosure#/Slot# : 2:1
PHY[2] Enclosure#/Slot# : 2:2
PHY[3] Enclosure#/Slot# : 2:3
------------------------------------------------------------------------
Physical device information
------------------------------------------------------------------------
Initiator at ID #0
Device is a Enclosure services device
Enclosure # : 2
Slot # : 0
SAS Address : 5000e0c-e-36b1-200b
State : Standby (SBY)
Manufacturer : ESG-SHV.
Model Number : SCA HSBP M1.....
Firmware Revision : 2.17
Serial No : ESGSHVqa217
GUID : N/A
Protocol : SAS
Device Type : Enclosure services device
Device is a Hard disk
Enclosure # : 2
Slot # : 0
SAS Address : 5000cca-0-1121-ea39
State : Optimal (OPT)
Size (in MB)/(in sectors) : 140205/287140276
Manufacturer : HITACHI
Model Number : HUS153014VLS300
Firmware Revision : A410
Serial No : JNVLN6LC
GUID : 5000cca01121ea38
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 2
Slot # : 1
SAS Address : 5000cca-0-1123-4ae5
State : Optimal (OPT)
Size (in MB)/(in sectors) : 140205/287140276
Manufacturer : HITACHI
Model Number : HUS153014VLS300
Firmware Revision : A410
Serial No : JNVMDPPC
GUID : 5000cca011234ae4
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 2
Slot # : 2
SAS Address : 5000cca-0-1123-4d75
State : Optimal (OPT)
Size (in MB)/(in sectors) : 140205/287140276
Manufacturer : HITACHI
Model Number : HUS153014VLS300
Firmware Revision : A410
Serial No : JNVMDVZC
GUID : 5000cca011234d74
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 2
Slot # : 3
SAS Address : 5000cca-0-1126-c97d
State : Optimal (OPT)
Size (in MB)/(in sectors) : 140205/287140276
Manufacturer : HITACHI
Model Number : HUS153014VLS300
Firmware Revision : A410
Serial No : JNVPA8LC
GUID : 5000cca01126c97c
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 2
Slot # : 4
SAS Address : 5000cca-0-1121-7f45
State : Hot Spare (HSP)
Size (in MB)/(in sectors) : 140205/287140276
Manufacturer : HITACHI
Model Number : HUS153014VLS300
Firmware Revision : A410
Serial No : JNVLE2TC
GUID : 5000cca011217f44
Protocol : SAS
Drive Type : SAS_HDD
------------------------------------------------------------------------
Enclosure information
------------------------------------------------------------------------
Enclosure# : 1
Logical ID : 500062b0:002e2b80
Numslots : 4
StartSlot : 0
Enclosure# : 2
Logical ID : 5000e0ce:36b12000
Numslots : 9
StartSlot : 0
------------------------------------------------------------------------
SAS2IRCU: Command DISPLAY Completed Successfully.
SAS2IRCU: Utility Completed Successfully.
sas2ircu 0 STATUS
LSI Corporation SAS2 IR Configuration Utility.
Version 20.00.00.00 (2014.09.18)
Copyright (c) 2008-2014 LSI Corporation. All rights reserved.
Background command progress status for controller 0...
IR Volume 1
Volume ID : 286
Current operation : None
Volume status : Enabled
Volume state : Optimal
Volume wwid : 03b1af2ecb4eb1ec
Physical disk I/Os : Not quiesced
SAS2IRCU: Command STATUS Completed Successfully.
SAS2IRCU: Utility Completed Successfully.
root@pve1:~# sas2ircu-status
-- Controller informations --
-- ID | Model
c0 | SAS2004
-- Arrays informations --
-- ID | Type | Size | Status
c0u0 | RAID10 | 278G | Okay (OKY)
-- Disks informations
-- ID | Model | Status
c0u0p0 | SCA HSBP M1..... (ESGSHVqa217) | Standby (SBY)
c0u0p1 | HUS153014VLS300 (JNVLN6LC) | Optimal (OPT)
c0u0p2 | HUS153014VLS300 (JNVMDPPC) | Optimal (OPT)
c0u0p3 | HUS153014VLS300 (JNVMDVZC) | Optimal (OPT)
c0u0p4 | HUS153014VLS300 (JNVPA8LC) | Optimal (OPT)
There is at least one disk/array in a NOT OPTIMAL state.
As you can see, the presence of a hot spare, but the script sas2ircu-status it does not show, and gives incorrect status of the array.
The text was updated successfully, but these errors were encountered:
As you can see, the presence of a hot spare, but the script sas2ircu-status it does not show, and gives incorrect status of the array.
The text was updated successfully, but these errors were encountered: