Replies: 1 comment
-
hallo eh2K |
Beta Was this translation helpful? Give feedback.
0 replies
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
-
Hello,
a little teaser:
Besides the alternate firmware I'm a bit further, and have a new prototype running, which is very similar to the OC. I have deliberately chosen similar components (encoder, display, buttons) because I wanted to make the sourcing as easy as possible for DIYers. Building is actually even easier, because of the central component: the daisy-submodule.
There are several expansion pins ike USB, I2C on the pcb. I am currently unsure if I should replace the Midi-In with a Led-Button (PB6149L). The current pcb is a mixture of through-hole (ICs, Header) and SMD (most resistors - I will try to change them from 603 to 805 in the next PCB version, if there is enough space).
The BOM is straightforward - besides the standard components ( jacks, encoders, buttons) a SH1106 display (same as the OC) and only 2 ICs are needed: 74HC165 shift-register and an opto-coppler (4N35 or H11L1M) for the midi-in.
More details: https://github.com/eh2k/squares-and-cir ... -Prototype
A few considerations regarding software.
In comparison to the OC, we have here only 2 audio outputs. Unfortunately, the DaisySM CV outputs (12bit DAC) designed for the 0-5V range, and not suitable for audio - otherwise I would have used them somehow. However, on the PCB there are 2 jumpers where you can switch A and B jacks between CV or audio in.
There are no direct triggers. The 8 CVs can be used as CV or also as triggers.
On the whole, I have the current "squares-and-circles" firmware running on the DaisySM without any major hurdles. Currently I'm stuck on the ADCs - and try to get out here what is possible - for me that would be a killer feature if I could use all CV inputs also for audio. Compared to Teensy the internal ADCs (16bit) are not so bad.
Feel free for feedback or any hints. I hope to find the time to make the module more "finished". If you have interest in PCB or DIY kit, you could send me a email without obligations - so that I can estimate whether there is any demand at all.
eh2k
Beta Was this translation helpful? Give feedback.
All reactions