Skip to content
/ BtYacc Public

This is an implementation of the tool "Yet Another Compiler Compiler" with support for the technique "backtracking".

Notifications You must be signed in to change notification settings

elfring/BtYacc

Repository files navigation

	     BTYACC -- backtracking yacc
	     ===========================

BTYACC was created by Chris Dodd using ideas from many
places and lots of code from the Berkeley Yacc
distribution, which is a public domain yacc clone put
together by the good folks at Berkeley.  This code is
distributed with NO WARRANTEE and is public domain. 
It is certain to contain bugs, which you should 
report to: chrisd@collins.com.

Vadim Maslov of Siber Systems <vadik@siber.com> 
considerably modified BTYACC to make it suitable 
for production environment.

Several people have suggested bug fixes that 
were incorporated into BtYacc.

See the README.BYACC files for more about 
Berkeley Yacc and other sources of info.

http://www.siber.com/btyacc/ is the current home of BtYacc.
It is provided courtesy of Siber Systems http://www.siber.com/.


		Version 3.0 changes
		-------------------
		  by Vadim Maslov

Changes mostly occurred in btyaccpa.ske file that 
contains the parsing shift/reduce/backtrack algorithm.

Version 3.0 innovations focus on:
- text position computation and propagation,
- industrial-strength error processing and recovery.


** Added mechanism for computing and propagating 
text position of tokens and non-terminals.

Compilers often need to build AST trees such that every node 
in a tree can relate to the parsed program source it came from.
The following applications are very likely to need this:
- debuggers that show actual source of the debugged program,
- source-to-source translators that want 
  unchanged parts of the tree to generate the unchanged code.

The new YYPOSN mechanism added in this version of BtYacc
helps you in automating the text position computation
and in assigning the computed text positions to the AST.
This mechanism is successfully used in commercial 
parsers and source-to-source translators.

In standard Yaccs every token and every non-terminal
has an YYSTYPE semantic value attached to it.
In this new version every token and every non-terminal
also has an YYPOSN text position attached to it.
YYPOSN is a user-defined type that can be anything and
that has a meaning of text position attached to
token or non-terminal.

In addition to semantic value stack BtYacc now maintains
text position stack. Behavior of the text position stack
is similar to the behavior of the semantic value stack.

If using text position mechanism, 
you need to define the following:

YYPOSN	Preprocessor variable that contains C/C++ type of 
	the text position attached to 
	every token and non-terminal.

yyposn  Global variable of type YYPOSN.
        The lexer must assign text position of 
	the returned token to yyposn, just like it assigns 
	semantic value of the returned token to yylval.

YYREDUCEPOSNFUNC
	Preprocessor variable that points to unction that 
	is called after the grammar rule reduction
	to reduce text positions located on the stack.
       
        This function is called by BtYacc to reduce text 
	positions. The function is called immediately after 
	the regular rule reduction occurs.
       
	The function has the following prototype:
	void ReducePosn(YYPOSN  &ret,
			YYPOSN  *terms, 
			YYSTYPE *term_vals,
			int      term_no, 
			int      stk_pos, 
			int      yychar,
			YYPOSN  &yyposn,
			UserType extra);

        The function arguments are:
        - ret         
	  Reference to the text position returned by 
          the rule. The function must write the computed 
          text position returned by the rule to ret.
          This is analogue of the $$ semantic value.

        - term_posns  
          Array of the right-hand side rule components 
	  YYPOSN text positions.  These are analogues of 
	  $1, $2, ..., $N in the text position world.

        - term_vals
	  Array of the right-hand side (RHS) rule components 
	  YYSTYPE values. These are the $1,...,$N themselves.

        - term_no
          Number of the components in RHS of the reduced rule.
          Equal to size of arrays term_posns and term_vals.
          Also equal to N in $1,...,$N in the reduced rule.

        - stk_pos 
          YYSTYPE/YYPOSN stack position before the reduction.

        - yychar
          Lookahead token that immediately follows 
 	  the reduced RHS components.

        - yyposn
          YYPOSN of the token that immediately follows 
	  the reduced RHS components.

        - extra
          User-defined extra argument passed to ReducePosn.
       
        Typically this function extracts text positions from 
	the right-hand side rule components and either 
	assigns them to the returned $$ structure/tree or
        if no $$ value is returned, puts them into 
	the ret text position from where
        it will be picked up by the later reduced rules.
       
YYREDUCEPOSNFUNCARG 
	Extra user-defined argument passed to 
	the ReducePosn function. This argument can use 
	any variables defined in btyaccpa.ske.


** Added code to btyaccpa.ske that automatically cleans up
semantic semantic values and text positions of tokens 
and non-terminals that are discarded and deleted as 
a result of error processing.

In the previous versions the discarded token and non-terminal
semantic values were not cleaned that caused quite severe
leaks.  The only way to fix it was to add garbage collection
to YYSTYPE class.

Now BtYacc skeleton calls delete functions for semantic
values and positions of the discarded tokens and
non-terminals.

You need to define the following functions that BtYacc 
calls when it needs to delete semantic value or text position.

YYDELETEVAL
	User-defined function that is called by BtYacc
	to delete semantic value of the token or non-terminal.
	
	The user-defined function must have the prototype:
	void DeleteYYval(YYSTYPE v, int type);
	v    is semantic value to delete,
	type is one of the following:
	0 	discarding token
	1       discarding state
	2       cleaning up stack when aborting

YYDELETEPOSN 
	User-defined function that is called by BtYacc
	to delete text position of the token or non-terminal.

	The user-defined function must have the prototype:
	void DeleteYYposn(YYPOSN p, int type);
	v    is semantic value to delete,
	type is one of the following:
	0 	discarding token
	1       discarding state
	2       cleaning up stack when aborting


** User can define "detailed" syntax error processing
function that reports an *exact* position of 
the token that caused the error.

If you define preprocessor variable YYERROR_DETAILED in 
your grammar then you need define the following 
error processing function:

void yyerror_detailed(char    *text, 
		      int      errt, 
		      YYSTYPE &errt_value,
		      YYPOSN  &errt_posn);

It receives the following arguments:
text		Error message.
errt		Code of the token that caused the error.
errt_value	Value of the token that caused the error.
errt_posn	Text position of token that caused error.


** Dropped compatibility with C.

Compatibility with C became increasingly difficult 
to maintain as new features were added to btyaccpa.ske.
So we dropped it. If anybody wants to make the new version
compatible with C, we would gladly accept the changes.

Meanwhile we expect that you use C++ to write grammar 
actions and everything else in grammar files.
Since C is (in a sense) subset of C++, your C-based 
grammar may work if you use C++ compiler to compile it.

		Version 3.0 bugs fixed
		----------------------

Matthias Meixner <meixner@mes.th-darmstadt.de> fixed a bug:
BtYacc does not correctly handle typenames, if one typename 
is a prefix of another one and if this type is used after 
the longer one. In this case BTYacc produces invalid code.


		Version 2.1 changes
		-------------------
		  by Vadim Maslov

** Added preprocessor statements to BtYacc that are similar 
in function and behavior to C/C++ preprocessor statements.

These statements are used to:

- Introduce modularity into a grammar by breaking it
  into several *.y files and assembling different
  grammars from the *.y modules using %include and %ifdef.

- Have several versions of the same grammar
  by using %ifdef and $endif.

- To include automatically generated grammar fragment.
  For instance, we use %include to include
  automatically generated list of tokens.

Preprocessor statements are:

%define <var-name> 
	Define preprocessor variable named <var-name>.

%ifdef <var-name>
	If preprocessor variable named <var-name> 
	is defined by %define, then process the text from
	this %ifdef to the closing %endif.

%endif
	Closing bracket for %ifdef preprocessor statement.
	Only one nesting level of %ifdef-%endif is allowed.

%include <file-name>
	Process contents of the file named <file-name>.
	If <file-name> is a relative name, it is looked up
        in a directory in which btyacc was started.
	Only one nesting level of %include is allowed.


		Version 2.0 changes
		-------------------
		  by Vadim Maslov


** Changed 16-bit short numbers to 32-bit int numbers in
grammar tables, so that huge grammar tables (tables that
are larger than 32768 elements) resulting from huge
grammars (Cobol grammar, for instance) can work correctly.
You need to have 32-bit integer to index table bigger than
32768 elements, 16-bit integer is not enough.

The original BtYacc just generated non-working tables
larger than 32768 elements without even notifying about
the table overflow.


** Make error recovery work correctly when error happens
while processing nested conflicts. Original BtYacc could
infinitely cycle in certain situations that involved error
recovery while in nested conflict.

More detailed explanation: when we have nested conflicts
(conflict that happens while trial-processing another
conflict), it leads btyacc into NP-complete searching of
conflict tree. The ultimate goal is YYVALID operator that
selects a particular branch of that tree as a valid one.

If no YYVALID is found on the tree, then error recovery
takes over.  The problem with this is that error recovery
is started in the same state context that exists on the
last surveyed branch of the conflict tree.  Sometimes this
last branch may be of zero length and it results in
recovering to exactly the same state as existed before
entering the conflict. BtYacc cycles then.

We solved this problem by memorizing the longest path in
the conflict tree while browsing it. If we ever get into
error recovery, we restore state that existed on the
longest path.  Effectively we say: if we have an error,
let us move forward as far as we possibly could while we
were browsing the conflict tree.


** Introduce YYVALID_NESTED operation in addition to
simply YYVALID.  When we have a nested conflict (conflict
while processing in trial mode for another conflict), we
want to relate YYVALID to a particular level of conflict
being in trial.

Since we mostly anticipate only 2-level nested conflicts
YYVALID_NESTED tells the parser to satisfy only the
internal conflict.  Therefore, in 1-level conflict
situation YYVALID_NESTED acts like a regular YYVALID, but
in 2-level conflict it is a no-op and the other YYVALID
for outer conflict will be searched for.


** Improved handling of situation where /tmp directory is
missing.  Original btyacc just died quietly when /tmp
directory was missing.  We added code that states the
problem explicitly. While on UNIX /tmp directory is always
present, it may be missing on WIN32 systems, therefore
diagnosing this situation is important.


	Version 1.0 changes: BackTracking 
	=================================
		by Chris Dodd

BTYACC is a modified version of yacc that supports
automatic backtracking and semantic disambiguation to
parse ambiguous grammars, as well as syntactic sugar for
inherited attributes (which tend to introduce conflicts).
Whenever a btyacc generated parser runs into a
shift-reduce or reduce-reduce error in the parse table, it
remembers the current parse point (yacc stack and input
stream state), and goes into trial parse mode.  It then
continues parsing, ignoring most rule actions.  If it runs
into an error (either through the parse table or through
an action calling YYERROR), it backtracks to the most
recent conflict point and tries a different alternative.
If it finds a successful parse (reaches the end of the
input or an action calls YYVALID), it backtracks to the
point where it first entered trial parse mode, and
continues with a full parse (executing all actions),
following the path of the successful trial.

Actions in btyacc come in two flavors -- {}-actions, which
are only executed when not in trial mode, and []-actions
which are executed regardless of mode.  There are also
inherited attributes, which look like arguments (they are
enclosed in "()") and act like []-actions.

What this buys you:

* No more lexer feedback hack.  In yacc grammars for C, a
standard hack, know as the "lexer feedback hack" is used
to find typedef names.  The lexer uses semantic
information to decide if any given identifier is a
typedef-name or not and returns a special token.  With
btyacc, you no longer need to do this; the lexer should
just always return an identifier.  The btyacc grammar then
needs a rule of the form:

typename: ID [ if (!IsTypeName(LookupId($1))) YYERROR; ]

While the hack works adequately well for parsing C, it
becomes a nightmare when you try to parse something like
C++, where treating an ID as a typedef becomes heavily
dependent on context.

* Easy disambiguation via simple ordering.  Btyacc runs
its trials via the rule "try shifting first, then try
reducing by the order that the conflicting rules appear in
the input file".  This means you can deal with semantic a
disambiguation rule like:
    [1] If it looks like a declaration it is, otherwise
    [2] If it looks like an expression it is, otherwise
    [3] it is a syntax error
	[Ellis&Stroustrup, Annotated C++ Reference Manual, p93]

To deal with this, you need only put all the rules for
declarations before the rules for expressions in the
grammar file.

* No extra cost if you do not use it.  Backtracking is
only triggered when the parse hits a shift/reduce or
reduce/reduce conflict in the table.  If you have no
conflicts in your grammar, there is no extra cost, other
than some extra code which will never be invoked.

* C++ and ANSI C compatible parsers.  The parsers produced
by btyacc can be compiled with C++ correctly.  If you
"#define" YYSTYPE to be some C++ type with constructor and
destructor, everything will work fine.  My favorite is
"#define YYSTYPE SmartPointer", where SmartPointer is a
smart pointer type that does garbage collection on the
pointed to objects.

BTYACC was originally written to make it easy to write a
C++ parser (my goal was to be able to use the grammar out
of the back of the ARM with as few modifications as
possible).  Anyone who has ever looked at Jim Roskind
public domain C++ yacc grammar, or the yacc-based grammar
used in g++ knows how difficult this is.  BTYACC is very
useful for parsing any ambiguous grammar, particularly
ones that come from trying to merge two (or more) complete
grammars.

Limitations of the backtracking: Currently, the generated
parser does NO pruning of alternate parsing paths.  To
avoid an exponential explosion of possible paths (and
parsing time), you need to manually tell the parser when
it can throw away saved paths using YYVALID.  In practice,
this turns out to be fairly easy to do.  A C++ parser (for
example) can just put a [YYVALID;] after every complete
declaration and statement rule, corresponding to pruning
the backtracking state after seeing a ';' or '}' -- there
will never be a situation in which it is useful to
backtrack past either of these.

Inherited attributes in btyacc:

Inherited attributes look a lot like function arguments to
non-terminals, which is what they end up being in a
recursive descent parser, but NOT how they are implemented
in btyacc.  Basically they are just syntactic sugar for
embedded semantic actions and $0, $-1, ... in normal yacc.
btyacc gives you two big advantages besides just the
syntax:
    1. it does type checking on the inherited attributes, 
       so you do not have to specify $<type>0 and makes sure 
       you give the correct number of arguments (inherited 
       attributes) to every use of a non-terminal.
    2. It "collapses" identical actions from that are produced 
       from inherited attributes.  This eliminates many 
       potential reduce-reduce conflicts arising from 
       the inherited attributes.

You use inherited attributes by declaring the types of the
attributes in the preamble with a type declaration and
declaring names of the attributes on the lhs of the yacc
rule.  You can of course have more than one rule with the
same lhs, and you can even give them different names in
each, but the type and number must be the same.

Here is a small example:
           /* lhs takes 2 inherited attributes */
%type <t1> lhs(<t1>, <t2>) 
	   stuff(<t1>, <t2>)
%%
lhs($i1, $i2) : { $$ = $i1 }
	      | lhs($i1, $i2) stuff($1,$i2) { $$ = $2; }

This is roughly equivalent to the following yacc code:
lhs :
      { $$ = $<t1>-1; }
    | lhs [ $<t1>$ = $-1; ] [ $<t2>$ = $<t2>0; ] stuff
      { $$ = $4; }
    ;

See the file "test/t2.y" for a longer and more complete
example.  At the current time, the start symbol cannot
have any arguments.

Variant parsers:

Btyacc supports the -S flag to use a different parser
skeleton, changing the way that the parser is called and
used.  The skeleton "push.skel" is included to produce a
"passive" parser that you feed tokens to (rather than
having the parser call a separate yylex routine).  With
push.skel, yyparse is defined as follows:

int yyparse(int token, YYSTYPE yylval)

You should call yyparse repeatedly with successive tokens
of input.  It returns 0 if more input is needed, 1 for a
successful parse, and -1 for an unrecoverable parse error.


	Miscellaneous Features in ver. 1.0
	----------------------------------
		by Chris Dodd

     The -r option has been implemented.  The -r option tells
Yacc to put the read-only tables in y.tab.c and the code and
variables in y.code.c.  Keith Bostic asked for this option so
that :yyfix could be eliminated.

     The -l and -t options have been implemented.  The -l
option tells Yacc not to include #line directives in the code
it produces.  The -t option causes debugging code to be
included in the compiled parser.

     The code for error recovery has been changed to
implement the same algorithm as AT&T Yacc.  There will still
be differences in the way error recovery works because AT&T
Yacc uses more default reductions than Berkeley Yacc.

     The environment variable TMPDIR determines the directory
where temporary files will be created.  If TMPDIR is defined,
temporary files will be created in the directory whose
pathname is the value of TMPDIR.  By default, temporary files
are created in /tmp.

     The keywords are now case-insensitive.  For example,
%nonassoc, %NONASSOC, %NonAssoc, and %nOnAsSoC are 
all equivalent.

     Commas and semicolons that are not part of C code are
treated as commentary.

     Line-end comments, as in BCPL, are permitted.  Line-end
comments begin with // and end at the next end-of-line.
Line-end comments are permitted in C code; they are converted
to C comments on output.

     The form of y.output files has been changed to look more
like those produced by AT&T Yacc.

     A new kind of declaration has been added.  
The form of the declaration is

	  %ident string

where string is a sequence of characters beginning with a
double quote and ending with either a double quote or the
next end-of-line, whichever comes first.  The declaration
will cause a #ident directive to be written near the start 
of the output file.

     If a parser has been compiled with debugging code, that
code can be enabled by setting an environment variable.  
If the environment variable YYDEBUG is set to 0, debugging
output is suppressed.  If it is set to 1, debugging output 
is written to standard output.


		Building BtYacc
		---------------
	by Chris Dodd and Vadim Maslov

We used GCC and GNU make to compile BtYacc both on UNIX and
WIN32 paltforms.  You are welcome to try different
combinations of makes and compilers.  Most likely it will
work, but it may require Makefile changes.

There is no config script.
Just type "make" and it should compile.

AWK. If you want to change file btyaccpa.ske (backtracking 
parser skeleton), you will need awk to compile it into 
skeleton.c file. We used GNU AWK (gawk) version 3.0.

It is known that using older versions of gawk
may create problems in compilation, because older awks 
have problems with backslashes at the end of a line.

For MSDOS, there a "makefile.dos" that should do the trick.
Note: makefile.dos was not tested for a long time.

The result of compilation should be a single executable called
"btyacc" which you can install anywhere you like; 
it does not require any other files in the distribution to run.


	       Legal Stuff
	       -----------
	by Chris Dodd and Vadim Maslov

In English: BtYacc is freeware. BtYacc is distributed with 
no warranty whatsoever. The author and any other contributors 
take no responsibility for any and all consequences of its use.

In Legalese: LIMITATION OF LIABILITY. NEITHER SIBER SYSTEMS
NOR ANY OF ITS LICENSORS NOR ANY BTYACC CONTRIBUTOR SHALL BE
LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR DAMAGES FOR LOSS OF PROFITS, REVENUE, DATA OR
DATA USE, CAUSED BY BTYACC AND INCURRED BY CUSTOMER OR ANY
THIRD PARTY, WHETHER IN AN ACTION IN CONTRACT OR TORT, EVEN
IF SIBER SYSTEMS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.

About

This is an implementation of the tool "Yet Another Compiler Compiler" with support for the technique "backtracking".

Resources

Stars

Watchers

Forks

Packages

No packages published

Languages