/
lib.rs
173 lines (173 loc) · 13 KB
/
lib.rs
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
#![no_std]
#![doc = include_str!("../README.md")]
#![allow(non_camel_case_types)]
#[derive(Copy, Clone, Debug, PartialEq, Eq)]
pub enum Interrupt {
#[doc = "0 - TIMER_IRQ_0"]
TIMER_IRQ_0 = 0,
#[doc = "1 - TIMER_IRQ_1"]
TIMER_IRQ_1 = 1,
#[doc = "2 - TIMER_IRQ_2"]
TIMER_IRQ_2 = 2,
#[doc = "3 - TIMER_IRQ_3"]
TIMER_IRQ_3 = 3,
#[doc = "4 - PWM_IRQ_WRAP"]
PWM_IRQ_WRAP = 4,
#[doc = "5 - USBCTRL_IRQ"]
USBCTRL_IRQ = 5,
#[doc = "6 - XIP_IRQ"]
XIP_IRQ = 6,
#[doc = "7 - PIO0_IRQ_0"]
PIO0_IRQ_0 = 7,
#[doc = "8 - PIO0_IRQ_1"]
PIO0_IRQ_1 = 8,
#[doc = "9 - PIO1_IRQ_0"]
PIO1_IRQ_0 = 9,
#[doc = "10 - PIO1_IRQ_1"]
PIO1_IRQ_1 = 10,
#[doc = "11 - DMA_IRQ_0"]
DMA_IRQ_0 = 11,
#[doc = "12 - DMA_IRQ_1"]
DMA_IRQ_1 = 12,
#[doc = "13 - IO_IRQ_BANK0"]
IO_IRQ_BANK0 = 13,
#[doc = "14 - IO_IRQ_QSPI"]
IO_IRQ_QSPI = 14,
#[doc = "15 - SIO_IRQ_PROC0"]
SIO_IRQ_PROC0 = 15,
#[doc = "16 - SIO_IRQ_PROC1"]
SIO_IRQ_PROC1 = 16,
#[doc = "17 - CLOCKS_IRQ"]
CLOCKS_IRQ = 17,
#[doc = "18 - SPI0_IRQ"]
SPI0_IRQ = 18,
#[doc = "19 - SPI1_IRQ"]
SPI1_IRQ = 19,
#[doc = "20 - UART0_IRQ"]
UART0_IRQ = 20,
#[doc = "21 - UART1_IRQ"]
UART1_IRQ = 21,
#[doc = "22 - ADC_IRQ_FIFO"]
ADC_IRQ_FIFO = 22,
#[doc = "23 - I2C0_IRQ"]
I2C0_IRQ = 23,
#[doc = "24 - I2C1_IRQ"]
I2C1_IRQ = 24,
#[doc = "25 - RTC_IRQ"]
RTC_IRQ = 25,
#[doc = "26 - SWI_IRQ_0"]
SWI_IRQ_0 = 26,
#[doc = "27 - SWI_IRQ_1"]
SWI_IRQ_1 = 27,
#[doc = "28 - SWI_IRQ_2"]
SWI_IRQ_2 = 28,
#[doc = "29 - SWI_IRQ_3"]
SWI_IRQ_3 = 29,
#[doc = "30 - SWI_IRQ_4"]
SWI_IRQ_4 = 30,
#[doc = "31 - SWI_IRQ_5"]
SWI_IRQ_5 = 31,
}
unsafe impl cortex_m::interrupt::InterruptNumber for Interrupt {
#[inline(always)]
fn number(self) -> u16 {
self as u16
}
}
#[cfg(feature = "rt")]
mod _vectors;
#[doc = "QSPI flash execute-in-place block"]
pub const XIP_CTRL: xip_ctrl::XipCtrl =
unsafe { xip_ctrl::XipCtrl::from_ptr(0x1400_0000 as usize as _) };
#[doc = "DW_apb_ssi has the following features: * APB interface – Allows for easy integration into a DesignWare Synthesizable Components for AMBA 2 implementation. * APB3 and APB4 protocol support. * Scalable APB data bus width – Supports APB data bus widths of 8, 16, and 32 bits. * Serial-master or serial-slave operation – Enables serial communication with serial-master or serial-slave peripheral devices. * Programmable Dual/Quad/Octal SPI support in Master Mode. * Dual Data Rate (DDR) and Read Data Strobe (RDS) Support - Enables the DW_apb_ssi master to perform operations with the device in DDR and RDS modes when working in Dual/Quad/Octal mode of operation. * Data Mask Support - Enables the DW_apb_ssi to selectively update the bytes in the device. This feature is applicable only in enhanced SPI modes. * eXecute-In-Place (XIP) support - Enables the DW_apb_ssi master to behave as a memory mapped I/O and fetches the data from the device based on the APB read request. This feature is applicable only in enhanced SPI modes. * DMA Controller Interface – Enables the DW_apb_ssi to interface to a DMA controller over the bus using a handshaking interface for transfer requests. * Independent masking of interrupts – Master collision, transmit FIFO overflow, transmit FIFO empty, receive FIFO full, receive FIFO underflow, and receive FIFO overflow interrupts can all be masked independently. * Multi-master contention detection – Informs the processor of multiple serial-master accesses on the serial bus. * Bypass of meta-stability flip-flops for synchronous clocks – When the APB clock (pclk) and the DW_apb_ssi serial clock (ssi_clk) are synchronous, meta-stable flip-flops are not used when transferring control signals across these clock domains. * Programmable delay on the sample time of the received serial data bit (rxd); enables programmable control of routing delays resulting in higher serial data-bit rates. * Programmable features: - Serial interface operation – Choice of Motorola SPI, Texas Instruments Synchronous Serial Protocol or National Semiconductor Microwire. - Clock bit-rate – Dynamic control of the serial bit rate of the data transfer; used in only serial-master mode of operation. - Data Item size (4 to 32 bits) – Item size of each data transfer under the control of the programmer. * Configured features: - FIFO depth – 16 words deep. The FIFO width is fixed at 32 bits. - 1 slave select output. - Hardware slave-select – Dedicated hardware slave-select line. - Combined interrupt line - one combined interrupt line from the DW_apb_ssi to the interrupt controller. - Interrupt polarity – active high interrupt lines. - Serial clock polarity – low serial-clock polarity directly after reset. - Serial clock phase – capture on first edge of serial-clock directly after reset."]
pub const XIP_SSI: xip_ssi::XipSsi =
unsafe { xip_ssi::XipSsi::from_ptr(0x1800_0000 as usize as _) };
pub const SYSINFO: sysinfo::Sysinfo =
unsafe { sysinfo::Sysinfo::from_ptr(0x4000_0000 as usize as _) };
#[doc = "Register block for various chip control signals"]
pub const SYSCFG: syscfg::Syscfg = unsafe { syscfg::Syscfg::from_ptr(0x4000_4000 as usize as _) };
pub const CLOCKS: clocks::Clocks = unsafe { clocks::Clocks::from_ptr(0x4000_8000 as usize as _) };
pub const RESETS: resets::Resets = unsafe { resets::Resets::from_ptr(0x4000_c000 as usize as _) };
pub const PSM: psm::Psm = unsafe { psm::Psm::from_ptr(0x4001_0000 as usize as _) };
pub const IO_BANK0: io::Io = unsafe { io::Io::from_ptr(0x4001_4000 as usize as _) };
pub const IO_QSPI: io::Io = unsafe { io::Io::from_ptr(0x4001_8000 as usize as _) };
pub const PADS_BANK0: pads::Pads = unsafe { pads::Pads::from_ptr(0x4001_c000 as usize as _) };
pub const PADS_QSPI: pads::Pads = unsafe { pads::Pads::from_ptr(0x4002_0000 as usize as _) };
#[doc = "Controls the crystal oscillator"]
pub const XOSC: xosc::Xosc = unsafe { xosc::Xosc::from_ptr(0x4002_4000 as usize as _) };
pub const PLL_SYS: pll::Pll = unsafe { pll::Pll::from_ptr(0x4002_8000 as usize as _) };
pub const PLL_USB: pll::Pll = unsafe { pll::Pll::from_ptr(0x4002_c000 as usize as _) };
#[doc = "Register block for busfabric control signals and performance counters"]
pub const BUSCTRL: busctrl::Busctrl =
unsafe { busctrl::Busctrl::from_ptr(0x4003_0000 as usize as _) };
pub const UART0: uart::Uart = unsafe { uart::Uart::from_ptr(0x4003_4000 as usize as _) };
pub const UART1: uart::Uart = unsafe { uart::Uart::from_ptr(0x4003_8000 as usize as _) };
pub const SPI0: spi::Spi = unsafe { spi::Spi::from_ptr(0x4003_c000 as usize as _) };
pub const SPI1: spi::Spi = unsafe { spi::Spi::from_ptr(0x4004_0000 as usize as _) };
#[doc = "DW_apb_i2c address block List of configuration constants for the Synopsys I2C hardware (you may see references to these in I2C register header; these are *fixed* values, set at hardware design time): IC_ULTRA_FAST_MODE ................ 0x0 IC_UFM_TBUF_CNT_DEFAULT ........... 0x8 IC_UFM_SCL_LOW_COUNT .............. 0x0008 IC_UFM_SCL_HIGH_COUNT ............. 0x0006 IC_TX_TL .......................... 0x0 IC_TX_CMD_BLOCK ................... 0x1 IC_HAS_DMA ........................ 0x1 IC_HAS_ASYNC_FIFO ................. 0x0 IC_SMBUS_ARP ...................... 0x0 IC_FIRST_DATA_BYTE_STATUS ......... 0x1 IC_INTR_IO ........................ 0x1 IC_MASTER_MODE .................... 0x1 IC_DEFAULT_ACK_GENERAL_CALL ....... 0x1 IC_INTR_POL ....................... 0x1 IC_OPTIONAL_SAR ................... 0x0 IC_DEFAULT_TAR_SLAVE_ADDR ......... 0x055 IC_DEFAULT_SLAVE_ADDR ............. 0x055 IC_DEFAULT_HS_SPKLEN .............. 0x1 IC_FS_SCL_HIGH_COUNT .............. 0x0006 IC_HS_SCL_LOW_COUNT ............... 0x0008 IC_DEVICE_ID_VALUE ................ 0x0 IC_10BITADDR_MASTER ............... 0x0 IC_CLK_FREQ_OPTIMIZATION .......... 0x0 IC_DEFAULT_FS_SPKLEN .............. 0x7 IC_ADD_ENCODED_PARAMS ............. 0x0 IC_DEFAULT_SDA_HOLD ............... 0x000001 IC_DEFAULT_SDA_SETUP .............. 0x64 IC_AVOID_RX_FIFO_FLUSH_ON_TX_ABRT . 0x0 IC_CLOCK_PERIOD ................... 100 IC_EMPTYFIFO_HOLD_MASTER_EN ....... 1 IC_RESTART_EN ..................... 0x1 IC_TX_CMD_BLOCK_DEFAULT ........... 0x0 IC_BUS_CLEAR_FEATURE .............. 0x0 IC_CAP_LOADING .................... 100 IC_FS_SCL_LOW_COUNT ............... 0x000d APB_DATA_WIDTH .................... 32 IC_SDA_STUCK_TIMEOUT_DEFAULT ...... 0xffffffff IC_SLV_DATA_NACK_ONLY ............. 0x1 IC_10BITADDR_SLAVE ................ 0x0 IC_CLK_TYPE ....................... 0x0 IC_SMBUS_UDID_MSB ................. 0x0 IC_SMBUS_SUSPEND_ALERT ............ 0x0 IC_HS_SCL_HIGH_COUNT .............. 0x0006 IC_SLV_RESTART_DET_EN ............. 0x1 IC_SMBUS .......................... 0x0 IC_OPTIONAL_SAR_DEFAULT ........... 0x0 IC_PERSISTANT_SLV_ADDR_DEFAULT .... 0x0 IC_USE_COUNTS ..................... 0x0 IC_RX_BUFFER_DEPTH ................ 16 IC_SCL_STUCK_TIMEOUT_DEFAULT ...... 0xffffffff IC_RX_FULL_HLD_BUS_EN ............. 0x1 IC_SLAVE_DISABLE .................. 0x1 IC_RX_TL .......................... 0x0 IC_DEVICE_ID ...................... 0x0 IC_HC_COUNT_VALUES ................ 0x0 I2C_DYNAMIC_TAR_UPDATE ............ 0 IC_SMBUS_CLK_LOW_MEXT_DEFAULT ..... 0xffffffff IC_SMBUS_CLK_LOW_SEXT_DEFAULT ..... 0xffffffff IC_HS_MASTER_CODE ................. 0x1 IC_SMBUS_RST_IDLE_CNT_DEFAULT ..... 0xffff IC_SMBUS_UDID_LSB_DEFAULT ......... 0xffffffff IC_SS_SCL_HIGH_COUNT .............. 0x0028 IC_SS_SCL_LOW_COUNT ............... 0x002f IC_MAX_SPEED_MODE ................. 0x2 IC_STAT_FOR_CLK_STRETCH ........... 0x0 IC_STOP_DET_IF_MASTER_ACTIVE ...... 0x0 IC_DEFAULT_UFM_SPKLEN ............. 0x1 IC_TX_BUFFER_DEPTH ................ 16"]
pub const I2C0: i2c::I2c = unsafe { i2c::I2c::from_ptr(0x4004_4000 as usize as _) };
pub const I2C1: i2c::I2c = unsafe { i2c::I2c::from_ptr(0x4004_8000 as usize as _) };
#[doc = "Control and data interface to SAR ADC"]
pub const ADC: adc::Adc = unsafe { adc::Adc::from_ptr(0x4004_c000 as usize as _) };
#[doc = "Simple PWM"]
pub const PWM: pwm::Pwm = unsafe { pwm::Pwm::from_ptr(0x4005_0000 as usize as _) };
#[doc = "Controls time and alarms time is a 64 bit value indicating the time in usec since power-on timeh is the top 32 bits of time & timel is the bottom 32 bits to change time write to timelw before timehw to read time read from timelr before timehr An alarm is set by setting alarm_enable and writing to the corresponding alarm register When an alarm is pending, the corresponding alarm_running signal will be high An alarm can be cancelled before it has finished by clearing the alarm_enable When an alarm fires, the corresponding alarm_irq is set and alarm_running is cleared To clear the interrupt write a 1 to the corresponding alarm_irq"]
pub const TIMER: timer::Timer = unsafe { timer::Timer::from_ptr(0x4005_4000 as usize as _) };
pub const WATCHDOG: watchdog::Watchdog =
unsafe { watchdog::Watchdog::from_ptr(0x4005_8000 as usize as _) };
#[doc = "Register block to control RTC"]
pub const RTC: rtc::Rtc = unsafe { rtc::Rtc::from_ptr(0x4005_c000 as usize as _) };
pub const ROSC: rosc::Rosc = unsafe { rosc::Rosc::from_ptr(0x4006_0000 as usize as _) };
#[doc = "control and status for on-chip voltage regulator and chip level reset subsystem"]
pub const VREG_AND_CHIP_RESET: vreg_and_chip_reset::VregAndChipReset =
unsafe { vreg_and_chip_reset::VregAndChipReset::from_ptr(0x4006_4000 as usize as _) };
#[doc = "Testbench manager. Allows the programmer to know what platform their software is running on."]
pub const TBMAN: tbman::Tbman = unsafe { tbman::Tbman::from_ptr(0x4006_c000 as usize as _) };
#[doc = "DMA with separate read and write masters"]
pub const DMA: dma::Dma = unsafe { dma::Dma::from_ptr(0x5000_0000 as usize as _) };
#[doc = "DPRAM layout for USB device."]
pub const USBCTRL_DPRAM: usb_dpram::UsbDpram =
unsafe { usb_dpram::UsbDpram::from_ptr(0x5010_0000 as usize as _) };
#[doc = "USB FS/LS controller device registers"]
pub const USBCTRL_REGS: usb::Usb = unsafe { usb::Usb::from_ptr(0x5011_0000 as usize as _) };
#[doc = "Programmable IO block"]
pub const PIO0: pio::Pio = unsafe { pio::Pio::from_ptr(0x5020_0000 as usize as _) };
pub const PIO1: pio::Pio = unsafe { pio::Pio::from_ptr(0x5030_0000 as usize as _) };
#[doc = "Single-cycle IO block Provides core-local and inter-core hardware for the two processors, with single-cycle access."]
pub const SIO: sio::Sio = unsafe { sio::Sio::from_ptr(0xd000_0000 as usize as _) };
#[doc = r" Number available in the NVIC for configuring priority"]
#[cfg(feature = "rt")]
pub const NVIC_PRIO_BITS: u8 = 2;
#[cfg(feature = "rt")]
pub use cortex_m_rt::interrupt;
#[cfg(feature = "rt")]
pub use Interrupt as interrupt;
pub mod adc;
pub mod busctrl;
pub mod clocks;
pub mod common;
pub mod dma;
pub mod i2c;
pub mod io;
pub mod pads;
pub mod pio;
pub mod pll;
pub mod psm;
pub mod pwm;
pub mod resets;
pub mod rosc;
pub mod rtc;
pub mod sio;
pub mod spi;
pub mod syscfg;
pub mod sysinfo;
pub mod tbman;
pub mod timer;
pub mod uart;
pub mod usb;
pub mod usb_dpram;
pub mod vreg_and_chip_reset;
pub mod watchdog;
pub mod xip_ctrl;
pub mod xip_ssi;
pub mod xosc;