Uploading to the CC3200 SensorTag

[rei-vilo]

Uploading to the CC3200 LaunchPad from Energia requires a specific configuration of the SOP jumpers.

How to manage to upload from Energia to the CC3200 SensorTag?

I've found the SOP 0-1-2 on the schematics (swrc337) but how to use them with Energia?

[rei-vilo]

Even with an updated Debug DevPack firmware featuring c-JTAG, upload fails.

Debug DevPack

[Start: Texas Instruments XDS110 USB Debug Probe_0]

Execute the command:

%ccs_base%/common/uscif/dbgjtag -f %boarddatafile% -rv -o -S integrity

[Result]

-----[Print the board config pathname(s)]------------------------------------

C:\Users\ReiVilo\AppData\Local\TEXASI~1
CCS\ccs710\0\0\BrdDat\testBoard.dat

-----[Print the reset-command software log-file]-----------------------------

This utility has selected a 100- or 510-class product.
This utility will load the adapter 'jioxds110.dll'.
The library build date was 'Feb 22 2017'.
The library build time was '17:13:34'.
The library package version is '6.0.579.0'.
The library component version is '35.35.0.0'.
The controller does not use a programmable FPGA.
The controller has a version number of '5' (0x00000005).
The controller has an insertion length of '0' (0x00000000).
This utility will attempt to reset the controller to enter SWD mode.

-----[Print the reset-command hardware log-file]-----------------------------

This emulator does not create a reset log-file.

-----[Perform the SWD Mode Integrity test]-----------------------------------

This test will read the IDCODE register 100 times.

The IDCODE register value is 0x2ba01477.

The SWD Mode Integrity test has succeeded.

[End: Texas Instruments XDS110 USB Debug Probe_0]

[rei-vilo]

Texas Instruments recommends using the CC3200 LaunchPad for development, not the CC3200 SensorTag.