Skip to content
Permalink
master
Go to file
Run valgrind on host mock example runs to catch more bugs in CI.  These
tests would have caught the problem in #7464 before users did.

Add a list of some randomly picked examples to run, and add an option to
run the loop exactly once in the host mock routine, so the test will
actually exit under valgrind.
9 contributors

Users who have contributed to this file

@martinayotte @igrr @hemalchevli @WereCatf @yoursunny @d-a-v @earlephilhower @devyte @dsv19
96 lines (78 sloc) 2.28 KB
/*
This sketch establishes a TCP connection to a "quote of the day" service.
It sends a "hello" message, and then prints received data.
*/
#include <ESP8266WiFi.h>
#ifndef STASSID
#define STASSID "your-ssid"
#define STAPSK "your-password"
#endif
const char* ssid = STASSID;
const char* password = STAPSK;
const char* host = "djxmmx.net";
const uint16_t port = 17;
void setup() {
Serial.begin(115200);
// We start by connecting to a WiFi network
Serial.println();
Serial.println();
Serial.print("Connecting to ");
Serial.println(ssid);
/* Explicitly set the ESP8266 to be a WiFi-client, otherwise, it by default,
would try to act as both a client and an access-point and could cause
network-issues with your other WiFi-devices on your WiFi-network. */
WiFi.mode(WIFI_STA);
WiFi.begin(ssid, password);
while (WiFi.status() != WL_CONNECTED) {
delay(500);
Serial.print(".");
}
Serial.println("");
Serial.println("WiFi connected");
Serial.println("IP address: ");
Serial.println(WiFi.localIP());
}
void loop() {
static bool wait = false;
Serial.print("connecting to ");
Serial.print(host);
Serial.print(':');
Serial.println(port);
// Use WiFiClient class to create TCP connections
WiFiClient client;
if (!client.connect(host, port)) {
Serial.println("connection failed");
delay(5000);
return;
}
// This will send a string to the server
Serial.println("sending data to server");
if (client.connected()) {
client.println("hello from ESP8266");
}
// wait for data to be available
unsigned long timeout = millis();
while (client.available() == 0) {
if (millis() - timeout > 5000) {
Serial.println(">>> Client Timeout !");
client.stop();
delay(60000);
return;
}
}
// Read all the lines of the reply from server and print them to Serial
Serial.println("receiving from remote server");
// not testing 'client.connected()' since we do not need to send data here
while (client.available()) {
char ch = static_cast<char>(client.read());
Serial.print(ch);
}
// Close the connection
Serial.println();
Serial.println("closing connection");
client.stop();
if (wait) {
delay(300000); // execute once every 5 minutes, don't flood remote service
}
wait = true;
}
You can’t perform that action at this time.