Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Ble_tracker Scan set param failed: 5 #4058

Open
Salvora opened this issue Jan 22, 2023 · 5 comments
Open

Ble_tracker Scan set param failed: 5 #4058

Salvora opened this issue Jan 22, 2023 · 5 comments
Labels
stale

Comments

@Salvora
Copy link

Salvora commented Jan 22, 2023

The problem

I have multiple ESP32 devices and I use almost the same settings for each of them. However, the nodemcu ESP32 device spams me with multiple scan errors of the ble_tracker. The rest of the ESP32 devkitv1 devices does not give me the same error.

Which version of ESPHome has the issue?

2022.12.3

What type of installation are you using?

Home Assistant Add-on

Which version of Home Assistant has the issue?

2023.1.6

What platform are you using?

ESP32

Board

nodemcu

Component causing the issue

ble_tracker

Example YAML snippet

substitutions:
  devicename: "Mutfak ESP32S"
  roomname: "Mutfak"

esphome:
  name: mutfak-esp32s-nodemcu
  includes:
    - lgtv_uart.h

esp32:
  board: nodemcu-32s
  framework:
    type: arduino
    version: recommended

wifi:
  ssid: !secret esp_wifi_ssid
  password: !secret esp_wifi_pass
  id: mutfak_esp32s_wi_fi
  reboot_timeout: 30min

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "$devicename NodeMCU"
    password: !secret esp_ota_password
    ap_timeout: 5min

captive_portal:

# Enable logging
logger:

# Enable Home Assistant API
api:
  password: !secret esp_api_password
  encryption:
    key: !secret mutfak-esp32s-nodemcu_enc_key
  id: api_config

ota:
  password: !secret esp_ota_password

time:
  - platform: sntp
    servers: 192.168.1.1
    timezone: TRT-3
    id: time_router

esp32_ble_tracker:
  scan_parameters:
    interval: 60s
    active: True
  id: esp_ble_tracker

bluetooth_proxy:
  active: true

# TV CABLE COLORS
# Pin1: Siyah    3.5V
# Pin2: Kırmızı  RX
# Pin3: Beyaz    GND
# Pin4: Sarı     TX


uart:
  id: uart_bus
  tx_pin: 32
  rx_pin: 19
  baud_rate: 9600
  data_bits: 8
  parity: NONE
  stop_bits: 1


interval:
  - interval: 3s
    then:
      - uart.write: "ka 00 ff\r"

binary_sensor:
  - platform: custom
    lambda: |-
      auto lgtv_uart = new LGTVUARTComponent(id(uart_bus));
      App.register_component(lgtv_uart);
      return {lgtv_uart};
    binary_sensors:
      name: "${roomname} TV Durumu"
      internal: True
      entity_category: "diagnostic"
      device_class: "power"
      id: mutfak_tv_power

sensor:
  # Wi-Fi
  - platform: wifi_signal
    name: "$devicename Wi-Fi Sinyal Gücü"
    update_interval: 60s
    id: mutfak_esp32s_wifi_signal

  # Uptime Sensor
  - platform: uptime
    name: "$devicename Açık Süre"
    update_interval: 60s
    id: mutfak_esp32s_uptime

button:
  # Restart Button
  - platform: restart
    name: "$devicename Restart"
    id: mutfak_esp32s_restart

switch:
  # TV Switches
  - platform: template
    name: "$roomname TV Güç"
    id: mutfak_tv_pswitch
    icon: mdi:power
    device_class: "switch"
    lambda: |-
      if (id(mutfak_tv_power).state) {
        return true;
      } else {
        return false;
      }
    turn_on_action:
      - uart.write: "ka 00 01\r"
    turn_off_action:
      - uart.write: "ka 00 00\r"
      - lambda: |-
          id(mutfak_tv_power).publish_state(false);


text_sensor:
  - platform: wifi_info
    ip_address:
      name: "$devicename IP Address"
      icon: mdi:ip
    ssid:
      name: "$devicename Connected SSID"
      icon: mdi:router-wireless
    bssid:
      name: "$devicename Connected BSSID"
      icon: mdi:router-wireless
    mac_address:
      name: "$devicename Wi-Fi MAC Address"
      icon: mdi:wifi-marker
      
  - platform: version
    name: "$devicename Version"
    icon: mdi:package-up

Anything in the logs that might be useful for us?

INFO Reading configuration /config/esphome/mutfak-esp32s-nodemcu.yaml...
INFO Starting log output from mutfak-esp32s-nodemcu.local using esphome API
INFO Successfully connected to mutfak-esp32s-nodemcu.local
[23:16:49][I][app:102]: ESPHome version 2022.12.3 compiled on Jan 22 2023, 23:08:55
[23:16:49][C][wifi:504]: WiFi:
[23:16:49][C][wifi:362]:   Local MAC: B4:E6:2D:F5:E6:81
[23:16:49][C][wifi:363]:   SSID: 'LAXEV'[redacted]
[23:16:49][C][wifi:364]:   IP Address: 192.168.1.199
[23:16:49][C][wifi:366]:   BSSID: 10:7B:44:CC:D1:10[redacted]
[23:16:49][C][wifi:367]:   Hostname: 'mutfak-esp32s-nodemcu'
[23:16:49][C][wifi:369]:   Signal strength: -39 dB ▂▄▆█
[23:16:49][C][wifi:373]:   Channel: 11
[23:16:49][C][wifi:374]:   Subnet: 255.255.255.0
[23:16:49][C][wifi:375]:   Gateway: 192.168.1.1
[23:16:49][C][wifi:376]:   DNS1: 192.168.1.45
[23:16:49][C][wifi:377]:   DNS2: 192.168.1.1
[23:16:50][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:50][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:50][C][logger:293]: Logger:
[23:16:50][C][logger:294]:   Level: DEBUG
[23:16:50][C][logger:295]:   Log Baud Rate: 115200
[23:16:50][C][logger:296]:   Hardware UART: UART0
[23:16:50][D][esp32_ble_tracker:327]: Starting scan...
[23:16:50][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:50][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:50][C][uart.arduino_esp32:108]: UART Bus 1:
[23:16:50][C][uart.arduino_esp32:109]:   TX Pin: GPIO32
[23:16:50][C][uart.arduino_esp32:110]:   RX Pin: GPIO19
[23:16:50][C][uart.arduino_esp32:112]:   RX Buffer Size: 256
[23:16:50][C][uart.arduino_esp32:114]:   Baud Rate: 9600 baud
[23:16:50][C][uart.arduino_esp32:115]:   Data Bits: 8
[23:16:50][C][uart.arduino_esp32:116]:   Parity: NONE
[23:16:50][C][uart.arduino_esp32:117]:   Stop bits: 1
[23:16:50][D][esp32_ble_tracker:327]: Starting scan...
[23:16:50][C][uptime.sensor:031]: Uptime Sensor 'Mutfak ESP32S Açık Süre'
[23:16:50][C][uptime.sensor:031]:   Device Class: 'duration'
[23:16:50][C][uptime.sensor:031]:   State Class: 'total_increasing'
[23:16:50][C][uptime.sensor:031]:   Unit of Measurement: 's'
[23:16:50][C][uptime.sensor:031]:   Accuracy Decimals: 0
[23:16:50][C][uptime.sensor:031]:   Icon: 'mdi:timer-outline'
[23:16:50][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:50][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:50][C][template.switch:076]: Template Switch 'Mutfak TV Güç'
[23:16:50][C][template.switch:078]:   Icon: 'mdi:power'
[23:16:50][C][template.switch:087]:   Device Class: 'switch'
[23:16:50][C][template.switch:099]:   Restore Mode: restore defaults to OFF
[23:16:50][C][template.switch:059]:   Restore State: NO
[23:16:50][C][template.switch:060]:   Optimistic: NO
[23:16:50][D][esp32_ble_tracker:327]: Starting scan...
[23:16:50][C][bluetooth_proxy:065]: Bluetooth Proxy:
[23:16:50][C][bluetooth_proxy:066]:   Active: YES
[23:16:50][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:50][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:50][D][esp32_ble_tracker:327]: Starting scan...
[23:16:50][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:50][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:50][C][restart.button:017]: Restart Button 'Mutfak ESP32S Restart'
[23:16:50][D][esp32_ble_tracker:327]: Starting scan...
[23:16:50][C][wifi_info:013]: WifiInfo Mac Address 'Mutfak ESP32S Wi-Fi MAC Address'
[23:16:50][C][wifi_info:013]:   Icon: 'mdi:wifi-marker'
[23:16:50][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:50][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:50][C][version.text_sensor:021]: Version Text Sensor 'Mutfak ESP32S Version'
[23:16:50][C][version.text_sensor:021]:   Icon: 'mdi:package-up'
[23:16:50][D][esp32_ble_tracker:327]: Starting scan...
[23:16:50][C][esp32_ble_tracker:870]: BLE Tracker:
[23:16:50][C][esp32_ble_tracker:871]:   Scan Duration: 300 s
[23:16:50][C][esp32_ble_tracker:872]:   Scan Interval: 60000.0 ms
[23:16:50][C][esp32_ble_tracker:873]:   Scan Window: 30.0 ms
[23:16:50][C][esp32_ble_tracker:874]:   Scan Type: ACTIVE
[23:16:50][C][esp32_ble_tracker:875]:   Continuous Scanning: True
[23:16:50][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:50][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:50][D][esp32_ble_tracker:327]: Starting scan...
[23:16:50][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:50][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:50][D][esp32_ble_tracker:327]: Starting scan...
[23:16:50][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:50][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:50][C][captive_portal:088]: Captive Portal:
[23:16:50][D][esp32_ble_tracker:327]: Starting scan...
[23:16:50][C][mdns:103]: mDNS:
[23:16:50][C][mdns:104]:   Hostname: mutfak-esp32s-nodemcu
[23:16:50][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:50][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:50][C][ota:093]: Over-The-Air Updates:
[23:16:50][C][ota:094]:   Address: mutfak-esp32s-nodemcu.local:3232
[23:16:50][C][ota:097]:   Using Password.
[23:16:50][W][ota:103]: Last Boot was an unhandled reset, will proceed to safe mode in 7 restarts
[23:16:50][D][esp32_ble_tracker:327]: Starting scan...
[23:16:50][C][api:138]: API Server:
[23:16:50][C][api:139]:   Address: mutfak-esp32s-nodemcu.local:6053
[23:16:50][C][api:141]:   Using noise encryption: YES
[23:16:50][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:50][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:50][C][sntp:053]: SNTP Time:
[23:16:50][C][sntp:054]:   Server 1: '192.168.1.1'
[23:16:50][C][sntp:055]:   Server 2: ''
[23:16:50][C][sntp:056]:   Server 3: ''
[23:16:50][C][sntp:057]:   Timezone: 'TRT-3'
[23:16:50][D][esp32_ble_tracker:327]: Starting scan...
[23:16:50][C][wifi_signal.sensor:009]: WiFi Signal 'Mutfak ESP32S Wi-Fi Sinyal Gücü'
[23:16:50][C][wifi_signal.sensor:009]:   Device Class: 'signal_strength'
[23:16:50][C][wifi_signal.sensor:009]:   State Class: 'measurement'
[23:16:50][C][wifi_signal.sensor:009]:   Unit of Measurement: 'dBm'
[23:16:50][C][wifi_signal.sensor:009]:   Accuracy Decimals: 0
[23:16:50][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:50][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:50][C][wifi_info:009]: WifiInfo IPAddress 'Mutfak ESP32S IP Address'
[23:16:50][C][wifi_info:009]:   Icon: 'mdi:ip'
[23:16:50][D][esp32_ble_tracker:327]: Starting scan...
[23:16:50][C][wifi_info:011]: WifiInfo SSID 'Mutfak ESP32S Connected SSID'
[23:16:50][C][wifi_info:011]:   Icon: 'mdi:router-wireless'
[23:16:50][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:50][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:50][C][wifi_info:012]: WifiInfo BSSID 'Mutfak ESP32S Connected BSSID'
[23:16:50][C][wifi_info:012]:   Icon: 'mdi:router-wireless'
[23:16:50][D][esp32_ble_tracker:327]: Starting scan...
[23:16:50][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:50][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:50][D][esp32_ble_tracker:327]: Starting scan...
[23:16:50][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:51][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:51][D][esp32_ble_tracker:327]: Starting scan...
[23:16:51][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:51][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:51][D][esp32_ble_tracker:327]: Starting scan...
[23:16:51][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:51][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:51][D][esp32_ble_tracker:327]: Starting scan...
[23:16:51][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:51][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:51][D][esp32_ble_tracker:327]: Starting scan...
[23:16:51][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:51][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:51][D][esp32_ble_tracker:327]: Starting scan...
[23:16:51][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:51][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:51][D][esp32_ble_tracker:327]: Starting scan...
[23:16:51][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:51][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:51][D][esp32_ble_tracker:327]: Starting scan...
[23:16:51][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:51][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:51][D][esp32_ble_tracker:327]: Starting scan...
[23:16:51][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:51][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:51][D][esp32_ble_tracker:327]: Starting scan...
[23:16:51][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:51][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:51][D][esp32_ble_tracker:327]: Starting scan...
[23:16:51][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:51][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:51][D][esp32_ble_tracker:327]: Starting scan...
[23:16:51][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:51][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:51][D][esp32_ble_tracker:327]: Starting scan...
[23:16:51][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:51][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:51][D][esp32_ble_tracker:327]: Starting scan...
[23:16:51][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:51][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:51][D][esp32_ble_tracker:327]: Starting scan...
[23:16:51][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:51][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:51][D][esp32_ble_tracker:327]: Starting scan...
[23:16:51][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:51][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:51][D][esp32_ble_tracker:327]: Starting scan...
[23:16:51][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:51][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:51][D][esp32_ble_tracker:327]: Starting scan...
[23:16:51][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:51][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:51][D][esp32_ble_tracker:327]: Starting scan...
[23:16:51][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:51][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:51][D][esp32_ble_tracker:327]: Starting scan...
[23:16:51][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:51][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:51][D][esp32_ble_tracker:327]: Starting scan...
[23:16:51][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:51][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:51][D][esp32_ble_tracker:327]: Starting scan...
[23:16:52][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:52][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:52][D][esp32_ble_tracker:327]: Starting scan...
[23:16:52][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:52][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:52][D][esp32_ble_tracker:327]: Starting scan...
[23:16:52][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:52][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:52][D][esp32_ble_tracker:327]: Starting scan...
[23:16:52][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:52][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:52][D][esp32_ble_tracker:327]: Starting scan...
[23:16:52][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:52][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:52][D][esp32_ble_tracker:327]: Starting scan...
[23:16:52][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:52][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:52][D][esp32_ble_tracker:327]: Starting scan...
[23:16:52][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:52][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:52][D][esp32_ble_tracker:327]: Starting scan...
[23:16:52][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:52][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:52][D][esp32_ble_tracker:327]: Starting scan...
[23:16:52][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:52][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:52][D][esp32_ble_tracker:327]: Starting scan...
[23:16:52][D][LGTVUART:028]: [10] a 01 OK01x
[23:16:52][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:52][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:52][D][esp32_ble_tracker:327]: Starting scan...
[23:16:52][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:52][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:52][D][esp32_ble_tracker:327]: Starting scan...
[23:16:52][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:52][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:52][D][esp32_ble_tracker:327]: Starting scan...
[23:16:52][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:52][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:52][D][esp32_ble_tracker:327]: Starting scan...
[23:16:52][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:52][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:52][D][esp32_ble_tracker:327]: Starting scan...
[23:16:52][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:52][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:52][D][esp32_ble_tracker:327]: Starting scan...
[23:16:52][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:52][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:52][D][esp32_ble_tracker:327]: Starting scan...
[23:16:52][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:52][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:52][D][esp32_ble_tracker:327]: Starting scan...
[23:16:52][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:52][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:52][D][esp32_ble_tracker:327]: Starting scan...
[23:16:52][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:52][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:52][D][esp32_ble_tracker:327]: Starting scan...
[23:16:52][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:52][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:52][D][esp32_ble_tracker:327]: Starting scan...
[23:16:52][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:52][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:53][D][esp32_ble_tracker:327]: Starting scan...
[23:16:53][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:53][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:53][D][esp32_ble_tracker:327]: Starting scan...
[23:16:53][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:53][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:53][D][esp32_ble_tracker:327]: Starting scan...
[23:16:53][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:53][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:53][D][esp32_ble_tracker:327]: Starting scan...
[23:16:53][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:53][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:53][D][esp32_ble_tracker:327]: Starting scan...
[23:16:53][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:53][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:53][D][esp32_ble_tracker:327]: Starting scan...
[23:16:53][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:53][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:53][D][esp32_ble_tracker:327]: Starting scan...
[23:16:53][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:53][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:53][D][esp32_ble_tracker:327]: Starting scan...
[23:16:53][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:53][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:53][D][esp32_ble_tracker:327]: Starting scan...
[23:16:53][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:53][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:53][D][esp32_ble_tracker:327]: Starting scan...
[23:16:53][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:53][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:53][D][esp32_ble_tracker:327]: Starting scan...
[23:16:53][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:53][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:53][D][esp32_ble_tracker:327]: Starting scan...
[23:16:53][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:53][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:53][D][esp32_ble_tracker:327]: Starting scan...
[23:16:53][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:53][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:53][D][esp32_ble_tracker:327]: Starting scan...
[23:16:53][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:53][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:53][D][esp32_ble_tracker:327]: Starting scan...
[23:16:53][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:53][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:53][D][esp32_ble_tracker:327]: Starting scan...
[23:16:53][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:53][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:53][D][esp32_ble_tracker:327]: Starting scan...
[23:16:53][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:53][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:53][D][esp32_ble_tracker:327]: Starting scan...
[23:16:53][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:53][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:53][D][esp32_ble_tracker:327]: Starting scan...
[23:16:53][D][esp32_ble_tracker:186]: Stopping scan after failure...
[23:16:53][E][esp32_ble_tracker:195]: Scan set param failed: 5
[23:16:53][D][esp32_ble_tracker:327]: Starting scan...

Additional information

I use the exact same configuration for other esp32 boards (devkitv1) but they don't have the same problem.

esp32_ble_tracker:
  scan_parameters:
    interval: 60s
    active: True
  id: esp_ble_tracker

At the same time, wifi connection is very unreliable.
This issue might be related to #1503
@Salvora
Copy link
Author

Salvora commented Jan 24, 2023

I was wrong, all of my esp32 devices are spamming the same thing and having wifi connection problems.

@github-actions
Copy link

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.

@github-actions github-actions bot added the stale label May 25, 2023
@jacek-dargiel
Copy link

@Salvora Have you ever figured this out?

@kamnetanker
Copy link

Hello, you have issue in your configuration. In your scan parameters interval shall be ms. For example correctly working config looks like this:

esp32_ble_tracker:
  scan_parameters:
    interval: 60000ms
    active: false

@adorobis
Copy link

adorobis commented Jul 6, 2023

I have the same issue. Trying to set the interval as 60000ms or 60s results in the same messages flooding the log.

@polyfloyd polyfloyd mentioned this issue Apr 7, 2024
Merged
9 tasks
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
stale
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
4 participants
@jacek-dargiel @Salvora @adorobis @kamnetanker