Kconfig

menu "ESP32S3-Specific"
    visible if IDF_TARGET_ESP32S3

    choice ESP32S3_REV_MIN
        prompt "Minimum Supported ESP32-S3 Revision"
        default ESP32S3_REV_MIN_0
        help
            Required minimum chip revision. ESP-IDF will check for it and
            reject to boot if the chip revision fails the check.
            This ensures the chip used will have some modifications (features, or bugfixes).

            The complied binary will only support chips above this revision,
            this will also help to reduce binary size.

        config ESP32S3_REV_MIN_0
            bool "Rev v0.0 (ECO0)"
        config ESP32S3_REV_MIN_1
            bool "Rev v0.1 (ECO1)"
        config ESP32S3_REV_MIN_2
            bool "Rev v0.2 (ECO2)"
    endchoice

    config ESP32S3_REV_MIN_FULL
        int
        default 0 if ESP32S3_REV_MIN_0
        default 1 if ESP32S3_REV_MIN_1
        default 2 if ESP32S3_REV_MIN_2

    config ESP_REV_MIN_FULL
        int
        default ESP32S3_REV_MIN_FULL

        #
        # MAX Revision
        #

    choice ESP32S3_REV_MAX_FULL_STR
        prompt "Maximum Supported ESP32-S3 Revision"
        config ESP32S3_REV_MAX_FULL_STR_OPT
            bool "Rev v0.99"
    endchoice

    # Maximum revision that IDF supports.
    # It can not be changed by user.
    # Only Espressif can change it when a new version will be supported in IDF.
    # Supports all chips starting from ESP32S3_REV_MIN_FULL to ESP32S3_REV_MAX_FULL

    config ESP32S3_REV_MAX_FULL
        int
        default 99
        # keep in sync the "Maximum Supported Revision" description with this value

    config ESP_REV_MAX_FULL
        int
        default ESP32S3_REV_MAX_FULL

    choice ESP32S3_DEFAULT_CPU_FREQ_MHZ
        prompt "CPU frequency"
        default ESP32S3_DEFAULT_CPU_FREQ_40 if IDF_ENV_FPGA
        default ESP32S3_DEFAULT_CPU_FREQ_160 if !IDF_ENV_FPGA
        help
            CPU frequency to be set on application startup.

        config ESP32S3_DEFAULT_CPU_FREQ_40
            bool "40 MHz"
            depends on IDF_ENV_FPGA
        config ESP32S3_DEFAULT_CPU_FREQ_80
            bool "80 MHz"
        config ESP32S3_DEFAULT_CPU_FREQ_160
            bool "160 MHz"
        config ESP32S3_DEFAULT_CPU_FREQ_240
            bool "240 MHz"
    endchoice

    config ESP32S3_DEFAULT_CPU_FREQ_MHZ
        int
        default 40 if ESP32S3_DEFAULT_CPU_FREQ_40
        default 80 if ESP32S3_DEFAULT_CPU_FREQ_80
        default 160 if ESP32S3_DEFAULT_CPU_FREQ_160
        default 240 if ESP32S3_DEFAULT_CPU_FREQ_240

    menu "Cache config"

        choice ESP32S3_INSTRUCTION_CACHE_SIZE
            prompt "Instruction cache size"
            default ESP32S3_INSTRUCTION_CACHE_16KB
            help
                Instruction cache size to be set on application startup.
                If you use 16KB instruction cache rather than 32KB instruction cache,
                then the other 16KB will be managed by heap allocator.

            config ESP32S3_INSTRUCTION_CACHE_16KB
                bool "16KB"
            config ESP32S3_INSTRUCTION_CACHE_32KB
                bool "32KB"
        endchoice

        config ESP32S3_INSTRUCTION_CACHE_SIZE
            hex
            default 0x4000 if ESP32S3_INSTRUCTION_CACHE_16KB
            default 0x8000 if ESP32S3_INSTRUCTION_CACHE_32KB

        choice ESP32S3_ICACHE_ASSOCIATED_WAYS
            prompt "Instruction cache associated ways"
            default ESP32S3_INSTRUCTION_CACHE_8WAYS
            help
                Instruction cache associated ways to be set on application startup.

            config ESP32S3_INSTRUCTION_CACHE_4WAYS
                bool "4 ways"
            config ESP32S3_INSTRUCTION_CACHE_8WAYS
                bool "8 ways"
        endchoice

        config ESP32S3_ICACHE_ASSOCIATED_WAYS
            int
            default 4 if ESP32S3_INSTRUCTION_CACHE_4WAYS
            default 8 if ESP32S3_INSTRUCTION_CACHE_8WAYS

        choice ESP32S3_INSTRUCTION_CACHE_LINE_SIZE
            prompt "Instruction cache line size"
            default ESP32S3_INSTRUCTION_CACHE_LINE_32B
            help
                Instruction cache line size to be set on application startup.

            config ESP32S3_INSTRUCTION_CACHE_LINE_16B
                bool "16 Bytes"
                depends on ESP32S3_INSTRUCTION_CACHE_16KB
            config ESP32S3_INSTRUCTION_CACHE_LINE_32B
                bool "32 Bytes"
        endchoice

        config ESP32S3_INSTRUCTION_CACHE_LINE_SIZE
            int
            default 16 if ESP32S3_INSTRUCTION_CACHE_LINE_16B
            default 32 if ESP32S3_INSTRUCTION_CACHE_LINE_32B

        config ESP32S3_INSTRUCTION_CACHE_WRAP
            bool "Enable instruction cache wrap mode"
            default "n"
            help
                If enabled, instruction cache will use wrap mode to read spi flash or spi ram.
                The wrap length equals to ESP32S3_INSTRUCTION_CACHE_LINE_SIZE.
                However, it depends on complex conditions.

        choice ESP32S3_DATA_CACHE_SIZE
            prompt "Data cache size"
            default ESP32S3_DATA_CACHE_32KB
            help
                Data cache size to be set on application startup.
                If you use 32KB data cache rather than 64KB data cache,
                the other 32KB will be added to the heap.

            config ESP32S3_DATA_CACHE_16KB
                bool "16KB"
            config ESP32S3_DATA_CACHE_32KB
                bool "32KB"
            config ESP32S3_DATA_CACHE_64KB
                bool "64KB"
        endchoice

        config ESP32S3_DATA_CACHE_SIZE
            hex
            # For 16KB the actual configuration is 32kb cache, but 16kb will be reserved for heap at startup
            default 0x8000 if ESP32S3_DATA_CACHE_16KB
            default 0x8000 if ESP32S3_DATA_CACHE_32KB
            default 0x10000 if ESP32S3_DATA_CACHE_64KB

        choice ESP32S3_DCACHE_ASSOCIATED_WAYS
            prompt "Data cache associated ways"
            default ESP32S3_DATA_CACHE_8WAYS
            help
                Data cache associated ways to be set on application startup.

            config ESP32S3_DATA_CACHE_4WAYS
                bool "4 ways"
            config ESP32S3_DATA_CACHE_8WAYS
                bool "8 ways"
        endchoice

        config ESP32S3_DCACHE_ASSOCIATED_WAYS
            int
            default 4 if ESP32S3_DATA_CACHE_4WAYS
            default 8 if ESP32S3_DATA_CACHE_8WAYS

        choice ESP32S3_DATA_CACHE_LINE_SIZE
            prompt "Data cache line size"
            default ESP32S3_DATA_CACHE_LINE_32B
            help
                Data cache line size to be set on application startup.

            config ESP32S3_DATA_CACHE_LINE_16B
                bool "16 Bytes"
                depends on ESP32S3_DATA_CACHE_16KB || ESP32S3_DATA_CACHE_32KB
            config ESP32S3_DATA_CACHE_LINE_32B
                bool "32 Bytes"
            config ESP32S3_DATA_CACHE_LINE_64B
                bool "64 Bytes"
        endchoice

        config ESP32S3_DATA_CACHE_LINE_SIZE
            int
            default 16 if ESP32S3_DATA_CACHE_LINE_16B
            default 32 if ESP32S3_DATA_CACHE_LINE_32B
            default 64 if ESP32S3_DATA_CACHE_LINE_64B

        config ESP32S3_DATA_CACHE_WRAP
            bool "Enable data cache wrap mode"
            default "n"
            help
                If enabled, data cache will use wrap mode to read spi flash or spi ram.
                The wrap length equals to ESP32S3_DATA_CACHE_LINE_SIZE.
                However, it depends on complex conditions.

    endmenu  # Cache config

    # Hint: to support SPIRAM across multiple chips, check CONFIG_SPIRAM instead
    config ESP32S3_SPIRAM_SUPPORT
        bool "Support for external, SPI-connected RAM"
        default "n"
        select SPIRAM
        help
            This enables support for an external SPI RAM chip, connected in parallel with the
            main SPI flash chip.

    menu "SPI RAM config"
        depends on ESP32S3_SPIRAM_SUPPORT

        choice SPIRAM_MODE
            prompt "Mode (QUAD/OCT) of SPI RAM chip in use"
            default SPIRAM_MODE_QUAD

            config SPIRAM_MODE_QUAD
                bool "Quad Mode PSRAM"

            config SPIRAM_MODE_OCT
                bool "Octal Mode PSRAM"
        endchoice

        choice SPIRAM_TYPE
            prompt "Type of SPIRAM chip in use"
            default SPIRAM_TYPE_AUTO

            config SPIRAM_TYPE_AUTO
                bool "Auto-detect"

            config SPIRAM_TYPE_ESPPSRAM16
                bool "ESP-PSRAM16 or APS1604"
                depends on SPIRAM_MODE_QUAD

            config SPIRAM_TYPE_ESPPSRAM32
                bool "ESP-PSRAM32 or IS25WP032"
                depends on SPIRAM_MODE_QUAD

            config SPIRAM_TYPE_ESPPSRAM64
                bool "ESP-PSRAM64 , LY68L6400 or APS6408"
        endchoice

        config SPIRAM_SIZE
            int
            default -1 if SPIRAM_TYPE_AUTO
            default 2097152 if SPIRAM_TYPE_ESPPSRAM16
            default 4194304 if SPIRAM_TYPE_ESPPSRAM32
            default 8388608 if SPIRAM_TYPE_ESPPSRAM64
            default 16777216 if SPIRAM_TYPE_ESPPSRAM128
            default 33554432 if SPIRAM_TYPE_ESPPSRAM256
            default 0

        config SPIRAM_CLK_IO
            int
            default 30

        config SPIRAM_CS_IO
            int
            default 26

        config SPIRAM_FETCH_INSTRUCTIONS
            bool "Cache fetch instructions from SPI RAM"
            default n
            help
                If enabled, instruction in flash will be copied into SPIRAM.
                If SPIRAM_RODATA also enabled, you can run the instruction when erasing or programming the flash.

        config SPIRAM_RODATA
            bool "Cache load read only data from SPI RAM"
            default n
            help
                If enabled, rodata in flash will be copied into SPIRAM.
                If SPIRAM_FETCH_INSTRUCTIONS is also enabled,
                you can run the instruction when erasing or programming the flash.

        config SPIRAM_ALLOW_STACK_EXTERNAL_MEMORY
            bool "Allow external memory as an argument to xTaskCreateStatic"
            default n
            help
                Accessing memory in SPIRAM has certain restrictions, so task stacks allocated by xTaskCreate
                are by default allocated from internal RAM.

                This option allows for passing memory allocated from SPIRAM to be passed to xTaskCreateStatic.
                This should only be used for tasks where the stack is never accessed while the cache is disabled.

        choice SPIRAM_SPEED
            prompt "Set RAM clock speed"
            default SPIRAM_SPEED_40M
            help
                Select the speed for the SPI RAM chip.

            config SPIRAM_SPEED_120M
                depends on SPIRAM_MODE_QUAD
                bool "120MHz clock speed (READ DOCS FIRST)"
            config SPIRAM_SPEED_80M
                bool "80MHz clock speed"
            config SPIRAM_SPEED_40M
                bool "40Mhz clock speed"
        endchoice

        # insert non-chip-specific items here
        source "$IDF_PATH/components/esp_hw_support/Kconfig.spiram.common"

    endmenu

    config ESP32S3_MEMMAP_TRACEMEM
        bool
        default "n"

    config ESP32S3_MEMMAP_TRACEMEM_TWOBANKS
        bool
        default "n"

    config ESP32S3_TRAX
        bool "Use TRAX tracing feature"
        default "n"
        select ESP32S3_MEMMAP_TRACEMEM
        help
            The esp32-s3 contains a feature which allows you to trace the execution path the processor
            has taken through the program. This is stored in a chunk of 32K (16K for single-processor)
            of memory that can't be used for general purposes anymore. Disable this if you do not know
            what this is.

    config ESP32S3_TRAX_TWOBANKS
        bool "Reserve memory for tracing both pro as well as app cpu execution"
        default "n"
        depends on ESP32S3_TRAX && !FREERTOS_UNICORE
        select ESP32S3_MEMMAP_TRACEMEM_TWOBANKS
        help
            The esp32-s3 contains a feature which allows you to trace the execution path the processor
            has taken through the program. This is stored in a chunk of 32K (16K for single-processor)
            of memory that can't be used for general purposes anymore. Disable this if you do not know
            what this is.

    config ESP32S3_TRACEMEM_RESERVE_DRAM
        hex
        default 0x8000 if ESP32S3_MEMMAP_TRACEMEM && ESP32S3_MEMMAP_TRACEMEM_TWOBANKS
        default 0x4000 if ESP32S3_MEMMAP_TRACEMEM && !ESP32S3_MEMMAP_TRACEMEM_TWOBANKS
        default 0x0


    config ESP32S3_ULP_COPROC_ENABLED
        bool "Enable Ultra Low Power (ULP) Coprocessor"
        default "n"
        help
            Set to 'y' if you plan to load a firmware for the coprocessor.

            If this option is enabled, further coprocessor configuration will appear in the Components menu.

    config ESP32S3_ULP_COPROC_RESERVE_MEM
        int
        prompt "RTC slow memory reserved for coprocessor" if ESP32S3_ULP_COPROC_ENABLED
        default 512 if ESP32S3_ULP_COPROC_ENABLED
        range 32 8176 if ESP32S3_ULP_COPROC_ENABLED
        default 0 if !ESP32S3_ULP_COPROC_ENABLED
        range 0 0 if !ESP32S3_ULP_COPROC_ENABLED
        help
            Bytes of memory to reserve for ULP coprocessor firmware & data.

            Data is reserved at the beginning of RTC slow memory.

    config ESP32S3_ULP_COPROC_RISCV
        bool "Enable RISC-V as ULP coprocessor"
        depends on ESP32S3_ULP_COPROC_ENABLED
        default n
        help
            Set this to y to use the RISC-V coprocessor instead of the FSM-ULP.

    config ESP32S3_DEBUG_OCDAWARE
        bool "Make exception and panic handlers JTAG/OCD aware"
        default y
        select FREERTOS_DEBUG_OCDAWARE
        help
            The FreeRTOS panic and unhandled exception handers can detect a JTAG OCD debugger and
            instead of panicking, have the debugger stop on the offending instruction.

    config ESP32S3_BROWNOUT_DET
        bool "Hardware brownout detect & reset"
        depends on !IDF_ENV_FPGA
        default y
        help
            The ESP32-S3 has a built-in brownout detector which can detect if the voltage is lower than
            a specific value. If this happens, it will reset the chip in order to prevent unintended
            behaviour.

    choice ESP32S3_BROWNOUT_DET_LVL_SEL
        prompt "Brownout voltage level"
        depends on ESP32S3_BROWNOUT_DET
        default ESP32S3_BROWNOUT_DET_LVL_SEL_7
        help
            The brownout detector will reset the chip when the supply voltage is approximately
            below this level. Note that there may be some variation of brownout voltage level
            between each ESP3-S3 chip.

            #The voltage levels here are estimates, more work needs to be done to figure out the exact voltages
            #of the brownout threshold levels.
        config ESP32S3_BROWNOUT_DET_LVL_SEL_7
            bool "2.44V"
        config ESP32S3_BROWNOUT_DET_LVL_SEL_6
            bool "2.56V"
        config ESP32S3_BROWNOUT_DET_LVL_SEL_5
            bool "2.67V"
        config ESP32S3_BROWNOUT_DET_LVL_SEL_4
            bool "2.84V"
        config ESP32S3_BROWNOUT_DET_LVL_SEL_3
            bool "2.98V"
        config ESP32S3_BROWNOUT_DET_LVL_SEL_2
            bool "3.19V"
        config ESP32S3_BROWNOUT_DET_LVL_SEL_1
            bool "3.30V"
    endchoice

    config ESP32S3_BROWNOUT_DET_LVL
        int
        default 1 if ESP32S3_BROWNOUT_DET_LVL_SEL_1
        default 2 if ESP32S3_BROWNOUT_DET_LVL_SEL_2
        default 3 if ESP32S3_BROWNOUT_DET_LVL_SEL_3
        default 4 if ESP32S3_BROWNOUT_DET_LVL_SEL_4
        default 5 if ESP32S3_BROWNOUT_DET_LVL_SEL_5
        default 6 if ESP32S3_BROWNOUT_DET_LVL_SEL_6
        default 7 if ESP32S3_BROWNOUT_DET_LVL_SEL_7


        # Note about the use of "FRC1" name: currently FRC1 timer is not used for
        # high resolution timekeeping anymore. Instead the esp_timer API, implemented
        # using FRC2 timer, is used.
        # FRC1 name in the option name is kept for compatibility.
    choice ESP32S3_TIME_SYSCALL
        prompt "Timers used for gettimeofday function"
        default ESP32S3_TIME_SYSCALL_USE_RTC_FRC1
        help
            This setting defines which hardware timers are used to
            implement 'gettimeofday' and 'time' functions in C library.

            - If both high-resolution and RTC timers are used, timekeeping will
              continue in deep sleep. Time will be reported at 1 microsecond
              resolution. This is the default, and the recommended option.
            - If only high-resolution timer is used, gettimeofday will
              provide time at microsecond resolution.
              Time will not be preserved when going into deep sleep mode.
            - If only RTC timer is used, timekeeping will continue in
              deep sleep, but time will be measured at 6.(6) microsecond
              resolution. Also the gettimeofday function itself may take
              longer to run.
            - If no timers are used, gettimeofday and time functions
              return -1 and set errno to ENOSYS.
            - When RTC is used for timekeeping, two RTC_STORE registers are
              used to keep time in deep sleep mode.

        config ESP32S3_TIME_SYSCALL_USE_RTC_FRC1
            bool "RTC and high-resolution timer"
            select ESP_TIME_FUNCS_USE_RTC_TIMER
            select ESP_TIME_FUNCS_USE_ESP_TIMER
        config ESP32S3_TIME_SYSCALL_USE_RTC
            bool "RTC"
            select ESP_TIME_FUNCS_USE_RTC_TIMER
        config ESP32S3_TIME_SYSCALL_USE_FRC1
            bool "High-resolution timer"
            select ESP_TIME_FUNCS_USE_ESP_TIMER
        config ESP32S3_TIME_SYSCALL_USE_NONE
            bool "None"
            select ESP_TIME_FUNCS_USE_NONE
    endchoice

    choice ESP32S3_RTC_CLK_SRC
        prompt "RTC clock source"
        default ESP32S3_RTC_CLK_SRC_INT_RC
        help
            Choose which clock is used as RTC clock source.

        config ESP32S3_RTC_CLK_SRC_INT_RC
            bool "Internal 150kHz RC oscillator"
        config ESP32S3_RTC_CLK_SRC_EXT_CRYS
            bool "External 32kHz crystal"
            select ESP_SYSTEM_RTC_EXT_XTAL
        config ESP32S3_RTC_CLK_SRC_EXT_OSC
            bool "External 32kHz oscillator at 32K_XP pin"
            select ESP_SYSTEM_RTC_EXT_OSC
        config ESP32S3_RTC_CLK_SRC_INT_8MD256
            bool "Internal 8MHz oscillator, divided by 256 (~32kHz)"
    endchoice

    config ESP32S3_RTC_CLK_CAL_CYCLES
        int "Number of cycles for RTC_SLOW_CLK calibration"
        default 3000 if ESP32S3_RTC_CLK_SRC_EXT_CRYS || ESP32S3_RTC_CLK_SRC_EXT_OSC || ESP32S3_RTC_CLK_SRC_INT_8MD256
        default 1024 if ESP32S3_RTC_CLK_SRC_INT_RC
        range 0 27000 if ESP32S3_RTC_CLK_SRC_EXT_CRYS || ESP32S3_RTC_CLK_SRC_EXT_OSC || ESP32S3_RTC_CLK_SRC_INT_8MD256
        range 0 32766 if ESP32S3_RTC_CLK_SRC_INT_RC
        help
            When the startup code initializes RTC_SLOW_CLK, it can perform
            calibration by comparing the RTC_SLOW_CLK frequency with main XTAL
            frequency. This option sets the number of RTC_SLOW_CLK cycles measured
            by the calibration routine. Higher numbers increase calibration
            precision, which may be important for applications which spend a lot of
            time in deep sleep. Lower numbers reduce startup time.

            When this option is set to 0, clock calibration will not be performed at
            startup, and approximate clock frequencies will be assumed:

            - 150000 Hz if internal RC oscillator is used as clock source. For this use value 1024.
            - 32768 Hz if the 32k crystal oscillator is used. For this use value 3000 or more.
              In case more value will help improve the definition of the launch of the crystal.
              If the crystal could not start, it will be switched to internal RC.

    config ESP32S3_DEEP_SLEEP_WAKEUP_DELAY
        int "Extra delay in deep sleep wake stub (in us)"
        default 2000
        range 0 5000
        help
            When ESP32S3 exits deep sleep, the CPU and the flash chip are powered on
            at the same time. CPU will run deep sleep stub first, and then
            proceed to load code from flash. Some flash chips need sufficient
            time to pass between power on and first read operation. By default,
            without any extra delay, this time is approximately 900us, although
            some flash chip types need more than that.

            By default extra delay is set to 2000us. When optimizing startup time
            for applications which require it, this value may be reduced.

            If you are seeing "flash read err, 1000" message printed to the
            console after deep sleep reset, try increasing this value.

    config ESP32S3_NO_BLOBS
        bool "No Binary Blobs"
        depends on !BT_ENABLED
        default n
        help
            If enabled, this disables the linking of binary libraries in the application build. Note
            that after enabling this Wi-Fi/Bluetooth will not work.

    config ESP32S3_RTCDATA_IN_FAST_MEM
        bool "Place RTC_DATA_ATTR and RTC_RODATA_ATTR variables into RTC fast memory segment"
        default n
        help
            This option allows to place .rtc_data and .rtc_rodata sections into
            RTC fast memory segment to free the slow memory region for ULP programs.

    config ESP32S3_USE_FIXED_STATIC_RAM_SIZE
        bool "Use fixed static RAM size"
        default n
        help
            If this option is disabled, the DRAM part of the heap starts right after the .bss section,
            within the dram0_0 region. As a result, adding or removing some static variables
            will change the available heap size.

            If this option is enabled, the DRAM part of the heap starts right after the dram0_0 region,
            where its length is set with ESP32S3_FIXED_STATIC_RAM_SIZE

    config ESP32S3_FIXED_STATIC_RAM_SIZE
        hex "Fixed Static RAM size"
        default 0x10000
        range 0 0x34000
        depends on ESP32S3_USE_FIXED_STATIC_RAM_SIZE
        help
            RAM size dedicated for static variables (.data & .bss sections).

endmenu  # ESP32S3-Specific