Skip to content

Latest commit

 

History

History
55 lines (32 loc) · 1.88 KB

File metadata and controls

55 lines (32 loc) · 1.88 KB

Digital To Analog Converter

{IDF_TARGET_DAC_CH_1: default = "GPIO25", esp32 = "GPIO25", esp32s2 = "GPIO17"} {IDF_TARGET_DAC_CH_2: default = "GPIO26", esp32 = "GPIO26", esp32s2 = "GPIO18"}

Overview

{IDF_TARGET_NAME} has two 8-bit DAC (digital to analog converter) channels, connected to {IDF_TARGET_DAC_CH_1} (Channel 1) and {IDF_TARGET_DAC_CH_2} (Channel 2).

The DAC driver allows these channels to be set to arbitrary voltages.

.. only:: esp32

    The DAC channels can also be driven with DMA-style written sample data by the digital controller, via the :doc:`I2S driver <i2s>` when using the "built-in DAC mode".

.. only:: esp32s2

    The DAC channels can also be driven with DMA-style written sample data by the digital controller, however the driver does not supported this yet.


For other analog output options, see the :doc:`Sigma-delta Modulation module <sigmadelta>` and the :doc:`LED Control module <ledc>`. Both these modules produce high frequency PWM output, which can be hardware low-pass filtered in order to generate a lower frequency analog output.

Application Example

Setting DAC channel 1 ({IDF_TARGET_DAC_CH_1}) voltage to approx 0.78 of VDD_A voltage (VDD * 200 / 255). For VDD_A 3.3V, this is 2.59V:

#include <driver/dac.h>

...

    dac_output_enable(DAC_CHANNEL_1);
    dac_output_voltage(DAC_CHANNEL_1, 200);

API Reference

.. include-build-file:: inc/dac.inc
.. include-build-file:: inc/dac_common.inc

GPIO Lookup Macros

Some useful macros can be used to specified the GPIO number of a DAC channel, or vice versa. e.g.

  1. DAC_CHANNEL_1_GPIO_NUM is the GPIO number of channel 1 ({IDF_TARGET_DAC_CH_1});
  2. DAC_{IDF_TARGET_DAC_CH_2}_CHANNEL is the channel number of GPIO 26 (channel 2).
.. include-build-file:: inc/dac_channel.inc
.. include-build-file:: inc/dac_types.inc