-
Notifications
You must be signed in to change notification settings - Fork 7k
/
twai_types.h
140 lines (126 loc) · 7.16 KB
/
twai_types.h
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
/*
* SPDX-FileCopyrightText: 2015-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
#include <stdbool.h>
#include "sdkconfig.h"
#include "soc/soc_caps.h"
/**
* @brief TWAI Constants
*/
#define TWAI_EXTD_ID_MASK 0x1FFFFFFF /**< Bit mask for 29 bit Extended Frame Format ID */
#define TWAI_STD_ID_MASK 0x7FF /**< Bit mask for 11 bit Standard Frame Format ID */
#define TWAI_FRAME_MAX_DLC 8 /**< Max data bytes allowed in TWAI */
#define TWAI_FRAME_EXTD_ID_LEN_BYTES 4 /**< EFF ID requires 4 bytes (29bit) */
#define TWAI_FRAME_STD_ID_LEN_BYTES 2 /**< SFF ID requires 2 bytes (11bit) */
#define TWAI_ERR_PASS_THRESH 128 /**< Error counter threshold for error passive */
/** @cond */ //Doxy command to hide preprocessor definitions from docs
/**
* @brief TWAI Message flags
*
* The message flags are used to indicate the type of message transmitted/received.
* Some flags also specify the type of transmission.
*/
#define TWAI_MSG_FLAG_NONE 0x00 /**< No message flags (Standard Frame Format) */
#define TWAI_MSG_FLAG_EXTD 0x01 /**< Extended Frame Format (29bit ID) */
#define TWAI_MSG_FLAG_RTR 0x02 /**< Message is a Remote Frame */
#define TWAI_MSG_FLAG_SS 0x04 /**< Transmit as a Single Shot Transmission. Unused for received. */
#define TWAI_MSG_FLAG_SELF 0x08 /**< Transmit as a Self Reception Request. Unused for received. */
#define TWAI_MSG_FLAG_DLC_NON_COMP 0x10 /**< Message's Data length code is larger than 8. This will break compliance with TWAI */
#define TWAI_BRP_MAX SOC_TWAI_BRP_MAX /**< Maximum configurable BRP value */
#define TWAI_BRP_MIN SOC_TWAI_BRP_MIN /**< Minimum configurable BRP value */
/**
* @brief Initializer macros for timing configuration structure
*
* The following initializer macros offer commonly found bit rates. These macros
* place the sample point at 80% or 67% of a bit time.
*
* @note These timing values are based on the assumption APB clock is at 80MHz
* @note The available bit rates are dependent on the chip target and revision.
*/
#if (SOC_TWAI_BRP_MAX > 256)
#define TWAI_TIMING_CONFIG_1KBITS() {.brp = 4000, .tseg_1 = 15, .tseg_2 = 4, .sjw = 3, .triple_sampling = false}
#define TWAI_TIMING_CONFIG_5KBITS() {.brp = 800, .tseg_1 = 15, .tseg_2 = 4, .sjw = 3, .triple_sampling = false}
#define TWAI_TIMING_CONFIG_10KBITS() {.brp = 400, .tseg_1 = 15, .tseg_2 = 4, .sjw = 3, .triple_sampling = false}
#endif
#if (SOC_TWAI_BRP_MAX > 128) || (CONFIG_ESP32_REV_MIN_FULL >= 200)
#define TWAI_TIMING_CONFIG_12_5KBITS() {.brp = 256, .tseg_1 = 16, .tseg_2 = 8, .sjw = 3, .triple_sampling = false}
#define TWAI_TIMING_CONFIG_16KBITS() {.brp = 200, .tseg_1 = 16, .tseg_2 = 8, .sjw = 3, .triple_sampling = false}
#define TWAI_TIMING_CONFIG_20KBITS() {.brp = 200, .tseg_1 = 15, .tseg_2 = 4, .sjw = 3, .triple_sampling = false}
#endif
#define TWAI_TIMING_CONFIG_25KBITS() {.brp = 128, .tseg_1 = 16, .tseg_2 = 8, .sjw = 3, .triple_sampling = false}
#define TWAI_TIMING_CONFIG_50KBITS() {.brp = 80, .tseg_1 = 15, .tseg_2 = 4, .sjw = 3, .triple_sampling = false}
#define TWAI_TIMING_CONFIG_100KBITS() {.brp = 40, .tseg_1 = 15, .tseg_2 = 4, .sjw = 3, .triple_sampling = false}
#define TWAI_TIMING_CONFIG_125KBITS() {.brp = 32, .tseg_1 = 15, .tseg_2 = 4, .sjw = 3, .triple_sampling = false}
#define TWAI_TIMING_CONFIG_250KBITS() {.brp = 16, .tseg_1 = 15, .tseg_2 = 4, .sjw = 3, .triple_sampling = false}
#define TWAI_TIMING_CONFIG_500KBITS() {.brp = 8, .tseg_1 = 15, .tseg_2 = 4, .sjw = 3, .triple_sampling = false}
#define TWAI_TIMING_CONFIG_800KBITS() {.brp = 4, .tseg_1 = 16, .tseg_2 = 8, .sjw = 3, .triple_sampling = false}
#define TWAI_TIMING_CONFIG_1MBITS() {.brp = 4, .tseg_1 = 15, .tseg_2 = 4, .sjw = 3, .triple_sampling = false}
/**
* @brief Initializer macro for filter configuration to accept all IDs
*/
#define TWAI_FILTER_CONFIG_ACCEPT_ALL() {.acceptance_code = 0, .acceptance_mask = 0xFFFFFFFF, .single_filter = true}
/** @endcond */
/**
* @brief TWAI Controller operating modes
*/
typedef enum {
TWAI_MODE_NORMAL, /**< Normal operating mode where TWAI controller can send/receive/acknowledge messages */
TWAI_MODE_NO_ACK, /**< Transmission does not require acknowledgment. Use this mode for self testing */
TWAI_MODE_LISTEN_ONLY, /**< The TWAI controller will not influence the bus (No transmissions or acknowledgments) but can receive messages */
} twai_mode_t;
/**
* @brief Structure to store a TWAI message
*
* @note The flags member is deprecated
*/
typedef struct {
union {
struct {
//The order of these bits must match deprecated message flags for compatibility reasons
uint32_t extd: 1; /**< Extended Frame Format (29bit ID) */
uint32_t rtr: 1; /**< Message is a Remote Frame */
uint32_t ss: 1; /**< Transmit as a Single Shot Transmission. Unused for received. */
uint32_t self: 1; /**< Transmit as a Self Reception Request. Unused for received. */
uint32_t dlc_non_comp: 1; /**< Message's Data length code is larger than 8. This will break compliance with ISO 11898-1 */
uint32_t reserved: 27; /**< Reserved bits */
};
//Todo: Deprecate flags
uint32_t flags; /**< Deprecated: Alternate way to set bits using message flags */
};
uint32_t identifier; /**< 11 or 29 bit identifier */
uint8_t data_length_code; /**< Data length code */
uint8_t data[TWAI_FRAME_MAX_DLC]; /**< Data bytes (not relevant in RTR frame) */
} twai_message_t;
/**
* @brief Structure for bit timing configuration of the TWAI driver
*
* @note Macro initializers are available for this structure
*/
typedef struct {
uint32_t brp; /**< Baudrate prescaler (i.e., APB clock divider). Any even number from 2 to 128 for ESP32, 2 to 32768 for ESP32S2.
For ESP32 Rev 2 or later, multiples of 4 from 132 to 256 are also supported */
uint8_t tseg_1; /**< Timing segment 1 (Number of time quanta, between 1 to 16) */
uint8_t tseg_2; /**< Timing segment 2 (Number of time quanta, 1 to 8) */
uint8_t sjw; /**< Synchronization Jump Width (Max time quanta jump for synchronize from 1 to 4) */
bool triple_sampling; /**< Enables triple sampling when the TWAI controller samples a bit */
} twai_timing_config_t;
/**
* @brief Structure for acceptance filter configuration of the TWAI driver (see documentation)
*
* @note Macro initializers are available for this structure
*/
typedef struct {
uint32_t acceptance_code; /**< 32-bit acceptance code */
uint32_t acceptance_mask; /**< 32-bit acceptance mask */
bool single_filter; /**< Use Single Filter Mode (see documentation) */
} twai_filter_config_t;
#ifdef __cplusplus
}
#endif