/
soc_caps.h
488 lines (409 loc) · 23 KB
/
soc_caps.h
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
/*
* SPDX-FileCopyrightText: 2020-2023 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
/*
* Soc capabilities file, describing the following chip attributes:
* - Peripheral or feature supported or not
* - Number of resources (peripheral, channel, etc.)
* - Maximum / Minimum value of HW, including: buffer/fifo size, length of transaction, frequency
* supported, etc.
*
* For boolean definitions:
* - if true: `#define MODULE_[SUBMODULE_]SUPPORT_FEATURE 1`.
* (`#define` blank string causes error when checking by `#if x`)
* - if false: not define anything at all.
* (`#ifdef x` is true even when `#define 0` is defined before.)
*
* The code depending on this file uses these boolean definitions as `#if x` or `#if !x`.
* (`#ifdef/ifndef x` is not compatible with `#define x 0`. Though we don't suggest to use `#define
* x 0`, it's still a risk.)
*
* ECO & exceptions:
* For ECO-ed booleans, `#define x "Not determined"` for them. This will cause error when used by
* `#if x` and `#if !x`, making these missing definitions more obvious.
*
* These defines are parsed and imported as kconfig variables via the script
* `tools/gen_soc_caps_kconfig/gen_soc_caps_kconfig.py`
*
* If this file is changed the script will automatically run the script
* and generate the kconfig variables as part of the pre-commit hooks.
*
* It can also be ran manually with `./tools/gen_soc_caps_kconfig/gen_soc_caps_kconfig.py 'components/soc/esp32s2/include/soc/'`
*
* For more information see `tools/gen_soc_caps_kconfig/README.md`
*/
#pragma once
/*-------------------------- COMMON CAPS ---------------------------------------*/
#define SOC_ADC_SUPPORTED 1
#define SOC_DAC_SUPPORTED 1
#define SOC_UART_SUPPORTED 1
#define SOC_TWAI_SUPPORTED 1
#define SOC_CP_DMA_SUPPORTED 1
#define SOC_DEDICATED_GPIO_SUPPORTED 1
#define SOC_GPTIMER_SUPPORTED 1
#define SOC_SUPPORTS_SECURE_DL_MODE 1
#define SOC_ULP_FSM_SUPPORTED 1
#define SOC_RISCV_COPROC_SUPPORTED 1
#define SOC_USB_OTG_SUPPORTED 1
#define SOC_PCNT_SUPPORTED 1
#define SOC_WIFI_SUPPORTED 1
#define SOC_ULP_SUPPORTED 1
#define SOC_CCOMP_TIMER_SUPPORTED 1
#define SOC_ASYNC_MEMCPY_SUPPORTED 1
#define SOC_EFUSE_KEY_PURPOSE_FIELD 1
#define SOC_EFUSE_SUPPORTED 1
#define SOC_TEMP_SENSOR_SUPPORTED 1
#define SOC_CACHE_SUPPORT_WRAP 1
#define SOC_RTC_FAST_MEM_SUPPORTED 1
#define SOC_RTC_SLOW_MEM_SUPPORTED 1
#define SOC_RTC_MEM_SUPPORTED 1
#define SOC_PSRAM_DMA_CAPABLE 1
#define SOC_XT_WDT_SUPPORTED 1
#define SOC_I2S_SUPPORTED 1
#define SOC_RMT_SUPPORTED 1
#define SOC_SDM_SUPPORTED 1
#define SOC_GPSPI_SUPPORTED 1
#define SOC_LEDC_SUPPORTED 1
#define SOC_I2C_SUPPORTED 1
#define SOC_SYSTIMER_SUPPORTED 1
#define SOC_SUPPORT_COEXISTENCE 0
#define SOC_AES_SUPPORTED 1
#define SOC_MPI_SUPPORTED 1
#define SOC_SHA_SUPPORTED 1
#define SOC_HMAC_SUPPORTED 1
#define SOC_DIG_SIGN_SUPPORTED 1
#define SOC_FLASH_ENC_SUPPORTED 1
#define SOC_SECURE_BOOT_SUPPORTED 1
#define SOC_MEMPROT_SUPPORTED 1
#define SOC_TOUCH_SENSOR_SUPPORTED 1
#define SOC_BOD_SUPPORTED 1
#define SOC_CLK_TREE_SUPPORTED 1
#define SOC_MPU_SUPPORTED 1
#define SOC_WDT_SUPPORTED 1
#define SOC_SPI_FLASH_SUPPORTED 1
/*-------------------------- XTAL CAPS ---------------------------------------*/
#define SOC_XTAL_SUPPORT_40M 1
/*-------------------------- ADC CAPS ----------------------------------------*/
/*!< SAR ADC Module*/
#define SOC_ADC_RTC_CTRL_SUPPORTED 1
#define SOC_ADC_DIG_CTRL_SUPPORTED 1
#define SOC_ADC_ARBITER_SUPPORTED 1
#define SOC_ADC_DIG_IIR_FILTER_SUPPORTED 1
#define SOC_ADC_DIG_IIR_FILTER_UNIT_BINDED 1 //ADC filter is binded with the ADC unit
#define SOC_ADC_MONITOR_SUPPORTED 1
#define SOC_ADC_DMA_SUPPORTED 1
#define SOC_ADC_DIG_SUPPORTED_UNIT(UNIT) 1 //Digital controller supported ADC unit
#define SOC_ADC_PERIPH_NUM (2)
#define SOC_ADC_CHANNEL_NUM(UNIT) (10)
#define SOC_ADC_MAX_CHANNEL_NUM (10)
#define SOC_ADC_ATTEN_NUM (4)
/*!< Digital */
#define SOC_ADC_DIGI_CONTROLLER_NUM (2)
#define SOC_ADC_PATT_LEN_MAX (32) /*!< Two pattern table, each contains 16 items. Each item takes 1 byte */
#define SOC_ADC_DIGI_MIN_BITWIDTH (12)
#define SOC_ADC_DIGI_MAX_BITWIDTH (12)
#define SOC_ADC_DIGI_IIR_FILTER_NUM (2)
#define SOC_ADC_DIGI_RESULT_BYTES (2)
#define SOC_ADC_DIGI_DATA_BYTES_PER_CONV (2)
#define SOC_ADC_DIGI_MONITOR_NUM (2)
/*!< F_sample = F_digi_con / 2 / interval. F_digi_con = 5M for now. 30 <= interval<= 4095 */
#define SOC_ADC_SAMPLE_FREQ_THRES_HIGH 83333
#define SOC_ADC_SAMPLE_FREQ_THRES_LOW 611
/*!< RTC */
#define SOC_ADC_RTC_MIN_BITWIDTH (13)
#define SOC_ADC_RTC_MAX_BITWIDTH (13)
/*!< Calibration */
#define SOC_ADC_CALIBRATION_V1_SUPPORTED (1) /*!< support HW offset calibration version 1*/
#define SOC_ADC_SELF_HW_CALI_SUPPORTED (1) /*!< support HW offset self calibration */
/*!< ADC power control is shared by PWDET, TempSensor */
#define SOC_ADC_SHARED_POWER 1
/*-------------------------- BROWNOUT CAPS -----------------------------------*/
#define SOC_BROWNOUT_RESET_SUPPORTED 1
/*-------------------------- CACHE CAPS --------------------------------------*/
#define SOC_CACHE_WRITEBACK_SUPPORTED 1
/*-------------------------- CP-DMA CAPS -------------------------------------*/
#define SOC_CP_DMA_MAX_BUFFER_SIZE (4095) /*!< Maximum size of the buffer that can be attached to descriptor */
/*-------------------------- CPU CAPS ----------------------------------------*/
#define SOC_CPU_CORES_NUM (1U)
#define SOC_CPU_INTR_NUM 32
#define SOC_CPU_BREAKPOINTS_NUM 2
#define SOC_CPU_WATCHPOINTS_NUM 2
#define SOC_CPU_WATCHPOINT_MAX_REGION_SIZE 64 // bytes
/*-------------------------- DAC CAPS ----------------------------------------*/
#define SOC_DAC_CHAN_NUM 2
#define SOC_DAC_RESOLUTION 8 // DAC resolution ratio 8 bit
/*-------------------------- GPIO CAPS ---------------------------------------*/
// ESP32-S2 has 1 GPIO peripheral
#define SOC_GPIO_PORT 1U
#define SOC_GPIO_PIN_COUNT 47
#define SOC_GPIO_SUPPORT_PIN_GLITCH_FILTER 1
#define SOC_GPIO_FILTER_CLK_SUPPORT_APB 1
// On ESP32-S2 those PADs which have RTC functions must set pullup/down/capability via RTC register.
// On ESP32-S2, Digital IOs have their own registers to control pullup/down/capability, independent with RTC registers.
#define SOC_GPIO_SUPPORT_RTC_INDEPENDENT (1)
// Force hold is a new function of ESP32-S2
#define SOC_GPIO_SUPPORT_FORCE_HOLD (1)
// 0~46 valid except 22~25
#define SOC_GPIO_VALID_GPIO_MASK (0x7FFFFFFFFFFFULL & ~(0ULL | BIT22 | BIT23 | BIT24 | BIT25))
// GPIO 46 is input only
#define SOC_GPIO_VALID_OUTPUT_GPIO_MASK (SOC_GPIO_VALID_GPIO_MASK & ~(0ULL | BIT46))
#define SOC_GPIO_IN_RANGE_MAX 46
#define SOC_GPIO_OUT_RANGE_MAX 45
// digital I/O pad powered by VDD3P3_CPU or VDD_SPI(GPIO_NUM_26~GPIO_NUM_46)
#define SOC_GPIO_VALID_DIGITAL_IO_PAD_MASK 0x00007FFFFC000000ULL
// The Clock Out singnal is binding to the pin's IO_MUX function
#define SOC_GPIO_CLOCKOUT_BY_IO_MUX (1)
/*-------------------------- Dedicated GPIO CAPS ---------------------------------------*/
#define SOC_DEDIC_GPIO_OUT_CHANNELS_NUM (8) /*!< 8 outward channels on each CPU core */
#define SOC_DEDIC_GPIO_IN_CHANNELS_NUM (8) /*!< 8 inward channels on each CPU core */
#define SOC_DEDIC_GPIO_ALLOW_REG_ACCESS (1) /*!< Allow access dedicated GPIO channel by register */
#define SOC_DEDIC_GPIO_HAS_INTERRUPT (1) /*!< Dedicated GPIO has its own interrupt source */
#define SOC_DEDIC_GPIO_OUT_AUTO_ENABLE (1) /*!< Dedicated GPIO output attribution is enabled automatically */
/*-------------------------- I2C CAPS ----------------------------------------*/
// ESP32-S2 has 2 I2C
#define SOC_I2C_NUM (2)
#define SOC_I2C_FIFO_LEN (32) /*!< I2C hardware FIFO depth */
#define SOC_I2C_CMD_REG_NUM (16) /*!< Number of I2C command registers */
#define SOC_I2C_SUPPORT_SLAVE (1)
// FSM_RST only resets the FSM, not using it. So SOC_I2C_SUPPORT_HW_FSM_RST not defined.
//ESP32-S2 support hardware clear bus
#define SOC_I2C_SUPPORT_HW_CLR_BUS (1)
#define SOC_I2C_SUPPORT_REF_TICK (1)
#define SOC_I2C_SUPPORT_APB (1)
/*-------------------------- I2S CAPS ----------------------------------------*/
// ESP32-S2 has 1 I2S
#define SOC_I2S_NUM (1U)
#define SOC_I2S_HW_VERSION_1 (1)
#define SOC_I2S_SUPPORTS_APLL (1)
#define SOC_I2S_SUPPORTS_PLL_F160M (1)
#define SOC_I2S_SUPPORTS_DMA_EQUAL (1)
#define SOC_I2S_SUPPORTS_LCD_CAMERA (1)
#define SOC_I2S_APLL_MIN_FREQ (250000000)
#define SOC_I2S_APLL_MAX_FREQ (500000000)
#define SOC_I2S_APLL_MIN_RATE (10675) //in Hz, I2S Clock rate limited by hardware
#define SOC_I2S_LCD_I80_VARIANT (1)
/*-------------------------- LCD CAPS ----------------------------------------*/
/* Notes: On esp32-s2, LCD intel 8080 timing is generated by I2S peripheral */
#define SOC_LCD_I80_SUPPORTED (1) /*!< Intel 8080 LCD is supported */
#define SOC_LCD_I80_BUSES (1U) /*!< Only I2S0 has LCD mode */
#define SOC_LCD_I80_BUS_WIDTH (24) /*!< Intel 8080 bus width */
/*-------------------------- LEDC CAPS ---------------------------------------*/
#define SOC_LEDC_HAS_TIMER_SPECIFIC_MUX (1)
#define SOC_LEDC_SUPPORT_APB_CLOCK (1)
#define SOC_LEDC_SUPPORT_REF_TICK (1)
#define SOC_LEDC_SUPPORT_XTAL_CLOCK (1)
#define SOC_LEDC_CHANNEL_NUM (8)
#define SOC_LEDC_TIMER_BIT_WIDTH (14)
#define SOC_LEDC_SUPPORT_FADE_STOP (1)
/*-------------------------- MMU CAPS ----------------------------------------*/
#define SOC_MMU_LINEAR_ADDRESS_REGION_NUM 5
#define SOC_MMU_PERIPH_NUM (1U)
/*-------------------------- MPU CAPS ----------------------------------------*/
//TODO: correct the caller and remove unsupported lines
#define SOC_MPU_CONFIGURABLE_REGIONS_SUPPORTED 0
#define SOC_MPU_MIN_REGION_SIZE 0x20000000U
#define SOC_MPU_REGIONS_MAX_NUM 8
#define SOC_MPU_REGION_RO_SUPPORTED 0
#define SOC_MPU_REGION_WO_SUPPORTED 0
/*-------------------------- PCNT CAPS ---------------------------------------*/
#define SOC_PCNT_GROUPS (1U)
#define SOC_PCNT_UNITS_PER_GROUP (4)
#define SOC_PCNT_CHANNELS_PER_UNIT (2)
#define SOC_PCNT_THRES_POINT_PER_UNIT (2)
/*-------------------------- RMT CAPS ----------------------------------------*/
#define SOC_RMT_GROUPS 1U /*!< One RMT group */
#define SOC_RMT_TX_CANDIDATES_PER_GROUP 4 /*!< Number of channels that capable of Transmit in each group */
#define SOC_RMT_RX_CANDIDATES_PER_GROUP 4 /*!< Number of channels that capable of Receive in each group */
#define SOC_RMT_CHANNELS_PER_GROUP 4 /*!< Total 4 channels */
#define SOC_RMT_MEM_WORDS_PER_CHANNEL 64 /*!< Each channel owns 64 words memory (1 word = 4 Bytes) */
#define SOC_RMT_SUPPORT_RX_DEMODULATION 1 /*!< Support signal demodulation on RX path (i.e. remove carrier) */
#define SOC_RMT_SUPPORT_TX_ASYNC_STOP 1 /*!< Support stop transmission asynchronously */
#define SOC_RMT_SUPPORT_TX_LOOP_COUNT 1 /*!< Support transmiting specified number of cycles in loop mode */
#define SOC_RMT_SUPPORT_TX_SYNCHRO 1 /*!< Support coordinate a group of TX channels to start simultaneously */
#define SOC_RMT_SUPPORT_TX_CARRIER_DATA_ONLY 1 /*!< TX carrier can be modulated to data phase only */
#define SOC_RMT_SUPPORT_REF_TICK 1 /*!< Support set REF_TICK as the RMT clock source */
#define SOC_RMT_SUPPORT_APB 1 /*!< Support set APB as the RMT clock source */
#define SOC_RMT_CHANNEL_CLK_INDEPENDENT 1 /*!< Can select different source clock for each channel */
/*-------------------------- RTCIO CAPS --------------------------------------*/
#define SOC_RTCIO_PIN_COUNT 22
#define SOC_RTCIO_INPUT_OUTPUT_SUPPORTED 1 /* This macro indicates that the target has separate RTC IOMUX hardware feature,
* so it supports unique IOMUX configuration (including IE, OE, PU, PD, DRV etc.)
* when the pins are switched to RTC function.
*/
#define SOC_RTCIO_HOLD_SUPPORTED 1
#define SOC_RTCIO_WAKE_SUPPORTED 1
/*-------------------------- Sigma Delta Modulator CAPS -----------------*/
#define SOC_SDM_GROUPS 1U
#define SOC_SDM_CHANNELS_PER_GROUP 8
#define SOC_SDM_CLK_SUPPORT_APB 1
/*-------------------------- SPI CAPS ----------------------------------------*/
#define SOC_SPI_HD_BOTH_INOUT_SUPPORTED 1 //Support enabling MOSI and MISO phases together under Halfduplex mode
#define SOC_SPI_PERIPH_NUM 3
#define SOC_SPI_DMA_CHAN_NUM 3
#define SOC_SPI_PERIPH_CS_NUM(i) (((i)==0)? 2: (((i)==1)? 6: 3))
#define SOC_SPI_MAX_CS_NUM 6
#define SOC_SPI_MAXIMUM_BUFFER_SIZE 72
#define SOC_SPI_MAX_PRE_DIVIDER 8192
#define SOC_SPI_SUPPORT_DDRCLK 1
#define SOC_SPI_SLAVE_SUPPORT_SEG_TRANS 1
#define SOC_SPI_SUPPORT_CD_SIG 1
#define SOC_SPI_SUPPORT_CONTINUOUS_TRANS 1
#define SOC_SPI_SUPPORT_CLK_APB 1
/// The SPI Slave half duplex mode has been updated greatly in ESP32-S2
#define SOC_SPI_SUPPORT_SLAVE_HD_VER2 1
// Peripheral supports DIO, DOUT, QIO, or QOUT
// VSPI (SPI3) only support 1-bit mode
#define SOC_SPI_PERIPH_SUPPORT_MULTILINE_MODE(host_id) ((host_id) != 2)
// Peripheral supports output given level during its "dummy phase"
// Only SPI1 supports this feature
#define SOC_SPI_PERIPH_SUPPORT_CONTROL_DUMMY_OUT 1
#define SOC_MEMSPI_IS_INDEPENDENT 1
#define SOC_SPI_SUPPORT_OCT 1
#define SOC_MEMSPI_SRC_FREQ_80M_SUPPORTED 1
#define SOC_MEMSPI_SRC_FREQ_40M_SUPPORTED 1
#define SOC_MEMSPI_SRC_FREQ_26M_SUPPORTED 1
#define SOC_MEMSPI_SRC_FREQ_20M_SUPPORTED 1
/*-------------------------- SYSTIMER CAPS ----------------------------------*/
#define SOC_SYSTIMER_COUNTER_NUM 1 // Number of counter units
#define SOC_SYSTIMER_ALARM_NUM 3 // Number of alarm units
#define SOC_SYSTIMER_BIT_WIDTH_LO 32 // Bit width of systimer low part
#define SOC_SYSTIMER_BIT_WIDTH_HI 32 // Bit width of systimer high part
/*-------------------------- TIMER GROUP CAPS --------------------------------*/
#define SOC_TIMER_GROUPS (2)
#define SOC_TIMER_GROUP_TIMERS_PER_GROUP (2)
#define SOC_TIMER_GROUP_COUNTER_BIT_WIDTH (64)
#define SOC_TIMER_GROUP_SUPPORT_XTAL (1)
#define SOC_TIMER_GROUP_SUPPORT_APB (1)
#define SOC_TIMER_GROUP_TOTAL_TIMERS (4)
/*-------------------------- TOUCH SENSOR CAPS -------------------------------*/
#define SOC_TOUCH_VERSION_2 (1) /*!<Hardware version of touch sensor */
#define SOC_TOUCH_SENSOR_NUM (15) /*!<15 Touch channels */
#define SOC_TOUCH_PROXIMITY_CHANNEL_NUM (3) /*!<Support touch proximity channel number. */
#define SOC_TOUCH_PAD_THRESHOLD_MAX (0x1FFFFF) /*!<If set touch threshold max value, The touch sensor can't be in touched status */
#define SOC_TOUCH_PAD_MEASURE_WAIT_MAX (0xFF) /*!<The timer frequency is 8Mhz, the max value is 0xff */
/*-------------------------- TWAI CAPS ---------------------------------------*/
#define SOC_TWAI_CONTROLLER_NUM 1UL
#define SOC_TWAI_CLK_SUPPORT_APB 1
#define SOC_TWAI_BRP_MIN 2
#define SOC_TWAI_BRP_MAX 32768
#define SOC_TWAI_SUPPORTS_RX_STATUS 1
/*-------------------------- UART CAPS ---------------------------------------*/
// ESP32-S2 has 2 UART.
#define SOC_UART_NUM (2)
#define SOC_UART_HP_NUM (2)
#define SOC_UART_SUPPORT_WAKEUP_INT (1) /*!< Support UART wakeup interrupt */
#define SOC_UART_SUPPORT_APB_CLK (1) /*!< Support APB as the clock source */
#define SOC_UART_SUPPORT_REF_TICK (1) /*!< Support REF_TICK as the clock source */
#define SOC_UART_FIFO_LEN (128) /*!< The UART hardware FIFO length */
#define SOC_UART_BITRATE_MAX (5000000) /*!< Max bit rate supported by UART */
/*-------------------------- SPIRAM CAPS -------------------------------------*/
#define SOC_SPIRAM_SUPPORTED 1
#define SOC_SPIRAM_XIP_SUPPORTED 1
/*-------------------------- USB CAPS ----------------------------------------*/
#define SOC_USB_OTG_PERIPH_NUM (1U)
/*--------------------------- SHA CAPS ---------------------------------------*/
/* Max amount of bytes in a single DMA operation is 4095,
for SHA this means that the biggest safe amount of bytes is
31 blocks of 128 bytes = 3968
*/
#define SOC_SHA_DMA_MAX_BUFFER_SIZE (3968)
#define SOC_SHA_SUPPORT_DMA (1)
/* The SHA engine is able to resume hashing from a user supplied context */
#define SOC_SHA_SUPPORT_RESUME (1)
/* Has "crypto DMA", which is shared with AES */
#define SOC_SHA_CRYPTO_DMA (1)
/* Supported HW algorithms */
#define SOC_SHA_SUPPORT_SHA1 (1)
#define SOC_SHA_SUPPORT_SHA224 (1)
#define SOC_SHA_SUPPORT_SHA256 (1)
#define SOC_SHA_SUPPORT_SHA384 (1)
#define SOC_SHA_SUPPORT_SHA512 (1)
#define SOC_SHA_SUPPORT_SHA512_224 (1)
#define SOC_SHA_SUPPORT_SHA512_256 (1)
#define SOC_SHA_SUPPORT_SHA512_T (1)
/*--------------------------- MPI CAPS ---------------------------------------*/
#define SOC_MPI_MEM_BLOCKS_NUM (4)
#define SOC_MPI_OPERATIONS_NUM (3)
/*--------------------------- RSA CAPS ---------------------------------------*/
#define SOC_RSA_MAX_BIT_LEN (4096)
/*-------------------------- AES CAPS -----------------------------------------*/
#define SOC_AES_SUPPORT_DMA (1)
#define SOC_AES_SUPPORT_GCM (1)
/*-------------------------- eFuse CAPS----------------------------*/
#define SOC_EFUSE_DIS_DOWNLOAD_ICACHE 1
#define SOC_EFUSE_DIS_DOWNLOAD_DCACHE 1
#define SOC_EFUSE_HARD_DIS_JTAG 1
#define SOC_EFUSE_SOFT_DIS_JTAG 1
#define SOC_EFUSE_DIS_BOOT_REMAP 1
#define SOC_EFUSE_DIS_LEGACY_SPI_BOOT 1
#define SOC_EFUSE_DIS_ICACHE 1
/*-------------------------- Secure Boot CAPS----------------------------*/
#define SOC_SECURE_BOOT_V2_RSA 1
#define SOC_EFUSE_SECURE_BOOT_KEY_DIGESTS 3
#define SOC_EFUSE_REVOKE_BOOT_KEY_DIGESTS 1
#define SOC_SUPPORT_SECURE_BOOT_REVOKE_KEY 1
/*-------------------------- Flash Encryption CAPS----------------------------*/
#define SOC_FLASH_ENCRYPTED_XTS_AES_BLOCK_MAX (64)
#define SOC_FLASH_ENCRYPTION_XTS_AES 1
#define SOC_FLASH_ENCRYPTION_XTS_AES_OPTIONS 1
#define SOC_FLASH_ENCRYPTION_XTS_AES_128 1
#define SOC_FLASH_ENCRYPTION_XTS_AES_256 1
/*-------------------------- MEMPROT CAPS ------------------------------------*/
#define SOC_MEMPROT_CPU_PREFETCH_PAD_SIZE 16
#define SOC_MEMPROT_MEM_ALIGN_SIZE 4
/* Has "crypto DMA", which is shared with SHA */
#define SOC_AES_CRYPTO_DMA (1)
#define SOC_AES_SUPPORT_AES_128 (1)
#define SOC_AES_SUPPORT_AES_192 (1)
#define SOC_AES_SUPPORT_AES_256 (1)
/*--------------- PHY REGISTER AND MEMORY SIZE CAPS --------------------------*/
#define SOC_PHY_DIG_REGS_MEM_SIZE (21*4)
/*--------------- WIFI LIGHT SLEEP CLOCK WIDTH CAPS --------------------------*/
#define SOC_WIFI_LIGHT_SLEEP_CLK_WIDTH (12)
/*-------------------------- SPI MEM CAPS ---------------------------------------*/
#define SOC_SPI_MEM_SUPPORT_AUTO_WAIT_IDLE (1)
#define SOC_SPI_MEM_SUPPORT_SW_SUSPEND (1)
#define SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE (1)
#define SOC_SPI_MEM_SUPPORT_WRAP (1)
/*-------------------------- Power Management CAPS ---------------------------*/
#define SOC_PM_SUPPORT_EXT0_WAKEUP (1)
#define SOC_PM_SUPPORT_EXT1_WAKEUP (1)
#define SOC_PM_SUPPORT_EXT_WAKEUP (1) /*!<Compatible to the old version of IDF */
#define SOC_PM_SUPPORT_WIFI_WAKEUP (1)
#define SOC_PM_SUPPORT_TOUCH_SENSOR_WAKEUP (1) /*!<Supports waking up from touch pad trigger */
#define SOC_PM_SUPPORT_WIFI_PD (1)
#define SOC_PM_SUPPORT_RTC_PERIPH_PD (1)
#define SOC_PM_SUPPORT_RTC_FAST_MEM_PD (1)
#define SOC_PM_SUPPORT_RTC_SLOW_MEM_PD (1)
#define SOC_PM_SUPPORT_RC_FAST_PD (1)
#define SOC_PM_SUPPORT_VDDSDIO_PD (1)
#define SOC_CONFIGURABLE_VDDSDIO_SUPPORTED (1)
/*-------------------------- CLOCK SUBSYSTEM CAPS ----------------------------------------*/
#define SOC_CLK_APLL_SUPPORTED (1)
#define SOC_CLK_RC_FAST_D256_SUPPORTED (1)
#define SOC_RTC_SLOW_CLK_SUPPORT_RC_FAST_D256 (1)
#define SOC_CLK_RC_FAST_SUPPORT_CALIBRATION (1)
#define SOC_CLK_XTAL32K_SUPPORTED (1) /*!< Support to connect an external low frequency crystal */
/*-------------------------- COEXISTENCE HARDWARE PTI CAPS -------------------------------*/
#define SOC_COEX_HW_PTI (1)
/* ---------------------------- Compatibility ------------------------------- */
// No contents
/*-------------------------- EXTERNAL COEXISTENCE CAPS -------------------------------------*/
#define SOC_EXTERNAL_COEX_ADVANCE (0) /*!< HARDWARE ADVANCED EXTERNAL COEXISTENCE CAPS */
#define SOC_EXTERNAL_COEX_LEADER_TX_LINE (1) /*!< EXTERNAL COEXISTENCE TX LINE CAPS */
/*-------------------------- Temperature Sensor CAPS -------------------------------------*/
#define SOC_TEMPERATURE_SENSOR_SUPPORT_FAST_RC (1)
/*------------------------------------ WI-FI CAPS ------------------------------------*/
#define SOC_WIFI_HW_TSF (1) /*!< Support hardware TSF */
#define SOC_WIFI_FTM_SUPPORT (1) /*!< Support FTM */
#define SOC_WIFI_WAPI_SUPPORT (1) /*!< Support WAPI */
#define SOC_WIFI_CSI_SUPPORT (1) /*!< Support CSI */
#define SOC_WIFI_MESH_SUPPORT (1) /*!< Support WIFI MESH */
#define SOC_WIFI_SUPPORT_VARIABLE_BEACON_WINDOW (1) /*!< Support delta early time for rf phy on/off */
#define SOC_WIFI_NAN_SUPPORT (1) /*!< Support WIFI Aware (NAN) */
/*-------------------------- ULP CAPS ----------------------------------------*/
#define SOC_ULP_HAS_ADC (1) /* ADC can be accessed from ULP */
/*------------------------------------- PHY CAPS -------------------------------------*/
#define SOC_PHY_COMBO_MODULE (0) /*!< Only support Wi-Fi*/