system_init_fn.txt

# This file documents the expected order of execution of ESP_SYSTEM_INIT_FN functions.
#
# When adding new ESP_SYSTEM_INIT_FN functions or changing init priorities of existing functions,
# keep this file up to date. This is checked in CI.
# When adding new functions or changing the priorities, please read the comments and see if
# they need to be updated to be consistent with the changes you are making.
#
# Entries are ordered by the order of execution (i.e. from low priority values to high ones).
# Each line has the following format:
#   prio: function_name in path/to/source_file on affinity_expression
# Where:
#   prio: priority value (higher value means function is executed later)
#   affinity_expression: bit map of cores the function is executed on


# esp_timer has to be initialized early, since it is used by several other components
100: esp_timer_startup_init in components/esp_timer/src/esp_timer.c on CONFIG_ESP_TIMER_ISR_AFFINITY

# HW stack guard via assist-debug module.
101: esp_hw_stack_guard_init in components/esp_system/hw_stack_guard.c on ESP_SYSTEM_INIT_ALL_CORES

# esp_sleep doesn't have init dependencies
105: esp_sleep_startup_init in components/esp_hw_support/sleep_gpio.c on BIT(0)
106: sleep_clock_startup_init in components/esp_hw_support/sleep_clock.c on BIT(0)
107: sleep_sys_periph_startup_init in components/esp_hw_support/sleep_system_peripheral.c on BIT(0)

# app_trace has to be initialized before systemview
115: esp_apptrace_init in components/app_trace/app_trace.c on ESP_SYSTEM_INIT_ALL_CORES
120: sysview_init in components/app_trace/sys_view/esp/SEGGER_RTT_esp.c on BIT(0)

# the rest of the components which are initialized from startup.c
# [refactor-todo]: move init calls into respective components
200: init_components0 in components/esp_system/startup.c on BIT(0)

# usb_console needs to create an esp_timer at startup.
# This can be done only after esp_timer initialization, which is now in init_components0.
220: esp_usb_console_init_restart_timer in components/esp_system/port/usb_console.c on BIT(0)

# usb_serial_jtag needs to create and acquire a PM clock at startup.
# This makes more sense to be done after esp_pm_impl_init, which is initialized in init_components0.
230: usb_serial_jtag_conn_status_init in components/driver/usb_serial_jtag/usb_serial_jtag_connection_monitor.c on BIT(0)