| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 | ESP32-H2 |
|---|
This example focuses on the networking part, enables forwarding packets between network interfaces. It creates a WiFi soft AP, which uses NAT to forward packets to and from the PPP network interface.
- A 4G module
- An esp32 series development board
- A Micro-USB cable for power supply and programming
Follow detailed instructions provided specifically for this example.
You can select the interface (UART or USB) connected to the Modem in Component config → Bridge Configuration → Modem Configuration of menuconfig.
Run idf.py flash monitor to build, flash and monitor the project.
Once a complete flash process has been performed, you can use idf.py app-flash monitor to reduce the flash time.
(To exit the serial monitor, type Ctrl-]. Please reset the development board f you cannot exit the monitor.)
For more information, see User_Guide.md.