Espressif's Zigbee Solutions consist of:
- A full spectrum of Zigbee device platforms
- Production ready SDK
- Zigbee and ESP RainMaker integration
Espressif platform solutions are as shown below:
- 802.15.4 SoCs (ESP32-H2, ESP32-C6, etc) can be used to build Zigbee devices.
- By efficiently combining Espressif 802.15.4 and Wi-Fi SoCs (ESP32, ESP32-C3, ESP32-S3, etc), Zigbee gateway can be built to connect the Zigbee network with the Wi-Fi network.
- We also provide Matter-Zigbee bridge solution that enable non-Matter devices based on Zigbee and other protocols to connect to the Matter ecosystem. See ESP Matter.
Espressif's Zigbee SDK is built on top of the ESP-IDF and Zboss stack.
The ZBOSS and Espressif Zigbee SDK is provided as pre-built library:
- esp-zboss-lib: ZBOSS libraries for ESP32 series SoCs
- esp-zigbee-lib: Espressif Zigbee SDK and APIs libraries
These two library components are hosted by ESP Registry.
Espressif's AIoT cloud platform ESP RainMaker can provide remote control and enable cloud-based device management for Zigbee devices.
By combining the above-mentioned Zigbee hardware and software solutions with ESP RainMaker, this one-stop Zigbee ecosystem solution provides a full-fledged cloud deployment through your own private account with advanced device management features.
.. todo::
Add introduction here and add example in the rainmaker repository for Zigbee solution
The supported features in current ESP Zigbee SDK are listed below:
- Zigbee 3.0
- Zigbee Pro R22
- Zigbee Cluster Library (ZCL) v8
- Home Automation Devices
- Touchlink
- Green Power Proxy, Sink, GPD
- Coordinator / Router / ZED / Sleepy device roles
- Gateway and Radio Co-Processor (RCP) example
- Network Co-Processor (NCP) and Host example
- Sniffer
| Cluster Name | Cluster ID |
|---|---|
| basic | 0x0000 |
| power_configuration | 0x0001 |
| identify | 0x0003 |
| groups | 0x0004 |
| scenes | 0x0005 |
| on_off | 0x0006 |
| on_off_switch_cfg | 0x0007 |
| level_control | 0x0008 |
| time | 0x000a |
| analog_input | 0x000c |
| analog_output | 0x000d |
| analog_value | 0x000e |
| binary_input | 0x000f |
| multistate_value | 0x0014 |
| commissioning | 0x0015 |
| ota | 0x0019 |
| green_power | 0x0021 |
| shade_config | 0x0100 |
| door_lock | 0x0101 |
| window_covering | 0x0102 |
| thermostat | 0x0201 |
| fan_control | 0x0202 |
| thermostat_user_interface | 0x0204 |
| color_control | 0x0300 |
| illuminance_measurement | 0x0400 |
| temperature_measurement | 0x0402 |
| pressure_measurement | 0x0403 |
| flow_measurement | 0x0404 |
| humidity_measurement | 0x0405 |
| occupancy_sensing | 0x0406 |
| carbon_dioxide_measurement | 0x040d |
| PM2.5_measurement | 0x042a |
| ias_zone | 0x0500 |
| price | 0x0700 |
| metering | 0x0702 |
| meter_identification | 0x0b01 |
| electrical_measurement | 0x0b04 |
| diagnostics | 0x0b05 |
| touchlink_commissioning | 0x1000 |
See each cluster's supported attribute in ZCL api-reference
Zigbee Home Automation| Device ID | Device Name | Default Clusters |
|---|---|---|
| 0x0002 | on_off_light | basic, identify, groups, scenes, on_off |
| 0x0000 | on_off_switch | basic, identify |
| 0x0102 | color_dimmable_light | basic, identify, groups, scenes, on_off, level_control, color_control |
| 0x0105 | color_dimmable_switch | basic, identify |
| 0x0009 | power_outlet | basic, identify, groups,scenes, on_off |
| 0x0200 | shade | basic, identify, groups, scenes, on_off, level_control, shade |
| 0x0201 | shade_controller | basic, identify |
| 0x000A | door_lock | basic, identify, groups, scenes, door_lock |
| 0x000B | door_lock_controller | basic, identify |
| 0x0301 | thermostat | basic, identify, thermostat_configuration |
| 0x0302 | temperature_sensor | basic, identify, temperature_meas |
| 0x0005 | configuration_tool | basic, identify, groups, scenes, on_off, level_control, color_control |
See default mandatory attributes in each HA device's cluster in HA api-reference
For any new cluster or device needs, please open an issue on GitHub. We will get back to you soon.