esp-rfid Does not boot anymore when upgraded to 0.7

[omersiar]

Please download latest version firmware.bin here https://github.com/omersiar/esp-rfid/releases/latest

You Need To Clear Browser's Cache or Open ESP-RFID Web UI on Browser's Incognito Mode

• Make sure you have a user's backup ( do not back up settings )
• Before upgrading make a factory reset.
• After factory reset connect to esp-rfid's Access Point.
• Do not setup any configuration
• Do firmware upgrade
• Configure your newly upgraded device
• Save and Reboot
• Restore Users back.

Or Windows PC users can use flash tool which is available on /bin folder

• Make sure you have a user's backup ( do not back up settings )
• use erase.bat
• then use flash.bat

[pidiet]

True.

Just tried an update from web ui from 0.7.0 to 0.7.2 (without any prerequisites) and my device was blowing away...

[omersiar]

Not modified header will be dropped, since the firmware actively changing, we do not need it for now. It can be enabled again when we hit the v1.