Loadmanager and Elli Charger Pro

[JabeBRD]

I have setup loadmanager in evcc.yaml

circuits:
  - name: Talo
    title: Talo
    maxCurrent: 25
#    maxPower: 17200
    meter: Verkko
    
  - name: Talli
    title: Talli
    maxcurrent: 16
#    maxpower: 11000
    parent: Talo

site:
  circuit: Talo
  title: Koti # display name for UI
  meters:
    grid: Verkko # grid meter
    pv: 
      - solis # list of pv inverters/ meters
  residualPower: 200 # additional household usage margin
  maxGridSupplyWhileBatteryCharging: 0 # ignore battery charging if AC consumption is above this value

loadpoints:
  - title: Elli Charger Pro 1 # display name for UI
    circuit: Talli
    charger: Elli1 # charger
    vehicle: e-Up
    mode: "pv" # default charge mode to apply when vehicle is disconnected; use "off" to disable by default if charger is publicly available
    # remaining settings are experts-only and best left at default values
    priority: '0' # relative priority for concurrent charging in PV mode with multiple loadpoints (higher values have higher priority)
    soc:
      # polling defines usage of the vehicle APIs
      # Modifying the default settings it NOT recommended. It MAY deplete your vehicle's battery
      # or lead to vehicle manufacturer banning you from API use. USE AT YOUR OWN RISK.
      poll:
        mode: charging
        # poll interval defines how often the vehicle API may be polled if NOT charging
        interval: 60m
#    estimate: 'true' # set false to disable interpolating between api updates (not recommended)
    enable: # pv mode enable behavior
      delay: 1m # threshold must be exceeded for this long
      threshold: 0 # grid power threshold (in Watts, negative=export). If zero, export must exceed minimum charge power to enable
    disable: # pv mode disable behavior
      delay: 5m # threshold must be exceeded for this long
      threshold: 0 # maximum import power (W)

When vehicle is charged at max current (16), loadmanager kicks in and lowers current even not realy nessessary.
See log here, charge current was 16,01A and 16,03A, and loadmanager acted

[circuit-Talli] DEBUG 2024/06/04 16:15:13 power: 7369.2W
[circuit-Talli] WARN 2024/06/04 16:15:13 over current detected: 16.03A > 16A
[circuit-Talli] DEBUG 2024/06/04 16:15:16 validate current: 16A -> 15.969999999999999A <= 16A at 16.03A: capped at 15.969999999999999A
[circuit-Talli] DEBUG 2024/06/04 16:15:43 power: 6656.200000000001W
[circuit-Talli] DEBUG 2024/06/04 16:15:43 current: 14.46A
[circuit-Talli] DEBUG 2024/06/04 16:16:13 power: 6656.200000000001W
[circuit-Talli] DEBUG 2024/06/04 16:16:13 current: 14.46A
[circuit-Talli] TRACE 2024/06/04 16:16:16 validate current: 15.969999999999999A -> 16A <= 16A at 14.46A: ok

[circuit-Talli] WARN 2024/06/04 16:31:43 over current detected: 16.01A > 16A
[circuit-Talli] DEBUG 2024/06/04 16:32:13 power: 7364.6W
[circuit-Talli] WARN 2024/06/04 16:32:13 over current detected: 16.01A > 16A
[circuit-Talli] DEBUG 2024/06/04 16:32:16 validate current: 16A -> 15.989999999999998A <= 16A at 16.01A: capped at 15.989999999999998A
[circuit-Talli] DEBUG 2024/06/04 16:32:43 power: 6667.700000000001W
[circuit-Talli] DEBUG 2024/06/04 16:32:43 current: 14.49A

[circuit-Talli] WARN 2024/06/04 16:36:43 over current detected: 16.01A > 16A
[circuit-Talli] DEBUG 2024/06/04 16:37:13 power: 7360W
[circuit-Talli] WARN 2024/06/04 16:37:13 over current detected: 16.01A > 16A
[circuit-Talli] DEBUG 2024/06/04 16:37:17 validate current: 16A -> 15.989999999999998A <= 16A at 16.01A: capped at 15.989999999999998A
[circuit-Talli] DEBUG 2024/06/04 16:37:43 power: 6196.200000000001W
[circuit-Talli] DEBUG 2024/06/04 16:37:43 current: 13.46A
[circuit-Talli] DEBUG 2024/06/04 16:38:13 power: 6196.200000000001W
[circuit-Talli] DEBUG 2024/06/04 16:38:13 current: 13.46A
[circuit-Talli] TRACE 2024/06/04 16:38:17 validate current: 14.925702173913043A -> 16A <= 16A at 13.46A: ok

[circuit-Talli] WARN 2024/06/04 16:38:43 over current detected: 16.03A > 16A
[circuit-Talli] DEBUG 2024/06/04 16:39:13 power: 7371.5W
[circuit-Talli] WARN 2024/06/04 16:39:13 over current detected: 16.03A > 16A
[circuit-Talli] DEBUG 2024/06/04 16:39:20 validate current: 16A -> 15.969999999999999A <= 16A at 16.03A: capped at 15.969999999999999A
[circuit-Talli] DEBUG 2024/06/04 16:39:43 power: 6681.5W
[circuit-Talli] DEBUG 2024/06/04 16:39:43 current: 14.55A
[circuit-Talli] DEBUG 2024/06/04 16:40:13 power: 6665.4W
[circuit-Talli] DEBUG 2024/06/04 16:40:13 current: 14.51A

Should i change my configuration 16 -> 16.50, or is this more loadmanager problem?
I have loadmanager enabled, as im planning on installing second charger to that circuit. Also do i need meter for that circuit, when two chargers are connected, or is it enough to use chargers own meters?